Galvalume steel is an important alloy material often used in daily life. The galvanized steel sheet is composed of aluminum-zinc alloy structure, which is composed of 55% aluminum, 43.5% zinc and 1.5% silicon solidified at a high temperature of 600℃. Its entire structure is composed of aluminum-iron-silicon-zinc, forming a dense quaternary crystal. Of an alloy.
Characteristics of Galvalume
Hot-dipped Galvalume Steel Coil has many excellent characteristics: strong corrosion resistance, 3 times that of pure galvanized sheet; beautiful spangles on the surface, which can be used as building exterior panels.
Corrosion resistance:
The corrosion resistance of “aluminized zinc steel coil” is mainly due to the protective function of aluminum and aluminum. When zinc is worn, aluminum forms a dense layer of aluminum oxide, which prevents corrosion-resistant substances from further corroding the interior.
Heat resistance:
Hot-dipped Galvalume Steel Coil has good heat resistance and can withstand high temperatures of more than 300 degrees Celsius. It is very similar to the high temperature resistance of aluminized steel plate. It is often used in chimney pipes, ovens, luminaires and fluorescent lampshades.
Heat reflectivity:
The heat reflectivity of Hot-dipped Galvalume Steel Coil is very high, twice that of galvanized steel sheet, and people often use it as a material for heat insulation.
Economical:
Because the density of 55% AL-Zn is lower than that of Zn, the area of the galvanized steel sheet is more than 3% larger than that of the coated steel sheet when the weight is the same and the thickness of the gold plating layer is the same.
Application of Hot-dipped Galvalume Steel Coil
use
The main uses of galvanized products are in two aspects. One is the shell and box of other electrical equipment used in electrical switch cabinets; the other is galvanized steel roofing for steel structure buildings, because of its good anti-corrosion and anti-corrosion properties. In many areas with heavy industrial pollution, aluminum-zinc color panels or aluminum-zinc fingerprint-resistant light panels are directly used on walls or roofs.
Construction: roofs, walls, garages, soundproof walls, pipes and modular houses, etc.
Automobile: muffler, exhaust pipe, wiper attachment, fuel tank, truck box, etc.
Home appliances: refrigerator back panels, gas stoves, air conditioners, electronic microwave ovens, LCD frames, CRT explosion-proof belts, LED backlights, electrical cabinets, etc.
Agricultural: pig houses, chicken houses, granaries, greenhouse pipes, etc.
Others: thermal insulation cover, heat exchanger, dryer, water heater, etc.
Nakshatra Steels & Alloys is one of the leading manufacturer and exporter of high tensile stainless steel, carbon steel, alloy steel, duplex steel products including butt weld pipe fittings, flanges, elbow, pipe cap, tee, reducers, slip on flanges, weld neck flanges, blind flanges, socket weld flanges, lap joint flanges, pipes, round bars and many more as per various standards like ANSI / ASME B16.9, B16.8, B16.5, ASTM, DIN, JIS, BS etc. to meet all the needs of our valuable customers. Please call us today at 9833263204 to request a free quote!
Rolling Mill Manufacturer offer best quality rolling mill machinery such as, tmt bar rolling mill, section rolling mill, automatic cooling bed and more in attractive price in Ahmedabad, India.
Da-Tsai Stainless Steel Co., Ltd, the only professional JIS/ SUS 200/300/400/600 series stainless steel (inox) wholesaler (core distributor/partner) in Taichung, Taiwan (R.O.C) since 1987, manufacture new certified stainless steel grades and finishes to trade(export &Import).
Da-Song Enterprise Co., Ltd, deal with top Japanese, Taiwan, and China mills over 30 years, is sophicated to provide the (best) finest quality with (cheap)lower price but better benefits to all the customers around the world.
We are confident that we can take care the orders in all value-adding processes of stainless products for our clients. And DTSS/ DSSS carrying at least 10,000 tons (both Hot & Cold Roll ) stainless steel coils/ foils/ strips/ sheets/ plates/ flats stocks are ready in all time.
Please see the DTSS/ DSSS specifications as below：
Grade : SUS/ JIS/ AISI / ASTM 409L/ 410S/ 420 J2/ 430/ 436L/ 439L/ 441/ 443CT/ 444/ 445NF/ 446/ 450
SUS/ JIS/ AISI / ASTM 301/ 303/ 304L/ 309/ 310S/ 316L/ 317L/ 321/ 347/201/ 202/ 204C3
DIN EN 1.4512/ 1.4516/ 1.4589/ 1.4016/ 1.4510/ 1.4509/ 1.4513/ 1.4521/ 1.4006/ 1.4028/ 1.4526/ 1.4301/ 1.4306/ 1.4845/ 1.4401/ 1.4404
Choice: Prime / Secondary / Ex-stock/ Baby coil / Scrap.
Origin： Taiwan / Japan / China
Surface finish： BA / 2BA/ 2B / 2D/ KB/ KD/ HL/ NO.1/ NO.4./ NO.5/ NO.8
Thickness： 0.20mm – 12.00mm.
Width： 1000mm up.
Length： Upon customers’ requests.
Packing： SS with thick paper cover.
Payment： 100% T/T in advance or Irr. Letter of Credit at sight.
Delivery： Within 7 working days after receive T/T or L/C.
李志堅 Chih-chien Lee
銷售工程師 Sales engineer
Da-Tsai Stainless Steel Co., Ltd.
Da-Song Enterprise Co., Ltd.
|
Euro Fittings manufactures and sells a wide range of buttweld fittings all over the world. To meet your regular needs and ensure you the best quality we offer a state-of-art technology with focused R&D and technical expertise. |
We have huge availability of various steel plates. This is both in the number of plates in stock and the options in both thickness and plate sizes, including carbon plate, alloy plate, pipeline plate, stainless plate, pressure vessel plate, abrasion resistant steel plate, Cor-Ten Plate, Steel Coil and shipbuilding plate. We also offer steel plate fabrication, quality control and testing if you need.
Mahabali Steel Centre is a professional manufacturer, supplier and exporter of stainless steel, carbon steel, alloy steel, duplex steel, high nickel alloy, inconel, monel, hastelloy, alloy 20, titanium fasteners, pipe fittings, flanges, forged fittings, gaskets, sheets, plates, coils, round bars, rods, etc.
Ped certified manufacturer of PTFE COATED fasteners like bolts, nuts, washers, threaded rod. Materials included inconel, monel, hastelloy, duplex and super duplex steel fasteners. Xylan Coating, PTFE coating dacromet coating is our speciallity.
Since the past few years we have expertise in all exotic grades of fasteners meeting custom requirements if our esteemed clients varying from aeronautics to general purpose applications.
Fasteners are a crucial part of our manufacturing line.
Our manufacturing range in metric sizes ranges from m1-m150
and imperial size ranges from 1/4″-6″ and #1-#20 in numeric inch series.
some of the most known fasteners are mentioned below
Stainless steel fastener range are manufactured in the following grades
- 410 stainless steel fasteners used for martensitic applications
- 304 stainless steel fasteners used for general purpose applications
- 304l stainless steel fasteners used for cryogenic applications
- 309 stainless steel fasteners used for high temperature applications
- 310 stainless steel fasteners used for high temperature applications
- 316 stainless steel fasteners used for corrosive environments
- 316l stainless steel fasteners used for sea water applications
- 317l stainless steel fasteners used for corrosive environments with high temperature applications
- 321 stainless steel fasteners used for high temperature applications
- 347 stainless steel fasteners used for high temperature applications
- 348 stainless steel fasteners used for high temperature applications
- a286 fasteners used for high temperature applications like aerospace.
Apart from stainless steel we also produce alloyed stainless steel fasteners which are expensive as compared to austenitic and martensitic stainless steel known at nitronic stainless steel below are the grades mentioned.
for high temperature applications, a cheaper alternative as compared to nickel alloys are nemonic alloys mentioned below.
For corrosive environments we produce monel fasteners namely
Corrosion and high temperature resistance both can be achieved in the below inconel fasteners.
- inconel 600 fasteners
- inconel 603 fasteners
- inconel 602 fasteners
- inconel 601 fasteners
- inconel 625 fasteners
- inconel 617 fasteners
- inconel 718 fasteners
- inconel x 750 fasteners
- inconel 686 fasteners
high temperature fasteners generally used for aeronautics are mentioned below.
high temperature plus high corrosion resistant hastelloy fasteners are manufactured in the following four grades at torqbolt
99% pure nickel based fastners used for special applications.
titanium and aeronautics have a very old relation and particularly in the following 2 grades.
if better corrosion resistant fasteners are required as compared to stainless steel, silicon bronze and copper nickel is used.
high temperature alloy steel available at cheaper rates as compared to nickel alloys.
Super high austenitic and precipitation hardening stainless steel grades
- 330 stainless steel fasteners
- 904l stainless steel fasteners
- 254 smo fasteners
- alloy 20 fasteners
- 17 4 ph fasteners
- 15 5 ph fasteners
- al 6xn fasteners
Dual Phase stainless steel fasteners with high prep ration used for extremely corrosive environments with high toughness,
- duplex 2205 fasteners
- duplex s31803 fasteners
- duplex 2507 fasteners
- ferralium 255 fasteners
- super duplex s32760 fasteners
- s32520 fasteners
Welcome to A LARGE INTERNATIONAL INDUSTRIAL CO.,TIMITED
Our corporation, founded in 2006, is specialized in production and export of various kinds of steel materials. We have five million RMB registered capital and RMB fifty million working capital. Among our clients from America, EC, Southeast Asia and the middle East, we enjoy a excellent reputation through these years’ hard work and experience. The businesses we handle include HOT ROLLED STEELCOLD ROLLED STEEL, WELD PIPE, ELECTRO GALVANIZED WIRES, DEFORMED STEEL BAR and so on with all NIZED WIRES,
With our years of experience and expertise, we are able to offer a high quality range of industrial HOT ROLLED STEEL, COLD ROLLED STEEL, WELD PIPE, ELECTRO GALVANIZED WIRES, DEFORMED STEEL BAR etc. These products are manufactured with latest technology and efficient workforce that leads to provide maximum satisfaction to our clients.
Further, we also offer customized solutions for these products so as to meet the diverse needs of our clients. In addition, our highly skilled team of professionals and experts help us in producing quality products for clients to cater their requirement.If you have any questions,please contact us. We are willing to help you. Hoping to establish a long-term business relationship with you.
We are a leading manufacturer and exporter of Black & Galvanised ERW steel pipes and tubes. AST pipes pioneered its operations 25 years back and has built a large customer base since its inception. We have successfully forged a commanding position in the domestic markets as well as International ones too.
We now have diversified into producing related products like CR sheets and also increased the size of our pipes from ½ inch up to 16 inch upto 10mm thickness which is an edge that we have over our competitors. Since our early days of inception, we have grown and diversified our operations into our sister concerns like Gaurang products and Haryana Pipe Ltd with dedicated line of production.
We now posses the technical know-how and infrastructure to produce a vast range of Steel products . In more than two decades of our existence, we have also built up a lasting relationship with our clients consisting of reputed corporates all over the globe.
Established in the year 2000, we Aakaf Steel Private Limited are professionally managed company engrossed in Trading, supplying and marketing of quality Iron and Steel Products. Aakaf Steel Private Limited Managed and promoted by young and dynamic professionals and having a total approach towards marketing we deliver highest quality Iron and Steel products at best competitive rate.
Aakaf Steel Private Limited Mainly engaged in Marketing, Trading, Supplying Iron and Steel Plates Sheets, Beam, Channel, Angel Chequared Plate CTD Bars, Round Bars, Square bars, Section –T etc.
Products Supplied By Aakaf Steel Private Limited Is manufactured by reputed manufactures like Steel Authority of India Ltd., Shah Alloys Ltd. , Essar Steel Ltd., JSW Steel Ltd., Jindal Steel & Power Ltd. And more who are the global leader in Iron and Steel Industries.
Abhishek Ispat Pvt. Ltd. was established in year 2000. Abhishek Ispat Pvt. Ltd. is engrossed in trading, supplying and marketing of good quality iron and steel products. It is managed by a group of well-trained professionals.
We, at Abhishek Ispat Pvt. Ltd. are young, dynamic people who manage and promote out company as a solutions provider for total marketing. We believe in quality and therefore deliver the highest quality Iron and Steel products. We price our products at the best competitive rates that do not burden our customers.
Acerias Paz del Rio SA is a Colombia-based company primarily engaged in the iron and steel industry. The Company’s activities include the exploration, exploitation, transformation, transport, distribution and sale of iron, limestone and carbon, as well as the manufacturing of steel products and derivates used in the industrial, metallurgical, construction and agricultural sectors. Its product portfolio includes iron and steel drawn rods, steel bars and corrugated rolls, laminated steel sheets, angle profiles, coils and metallurgical coke, as well as such by-products as coal, tar crude and ammonium sulphate, among others. In addition, the Company is a member of the Votorantim Group. The Company owns two subsidiaries Minas Paz del Rio SA and Inversiones Paz del Rio Ltda.
Acerinox SA is a Spain-based company active in the steel sector. It is engaged in the manufacturing, alloy and distribution of flat and long stainless steel products. The Companys products portfolio consists of slabs, billets, plates, coils, sheets, bars, circles, wired rods, angles and bars, among others. Its facilities include factories in Spain, the United States, South Africa and Malaysia, service centers, warehouses and offices. The Enterprise is a parent of Grupo Acerinox. The Group comprises a number of subsidiaries, such as Acerinox Europa SAU, North Ameerian Stainless Inc, Columbus Stainless Pty Ltd, Bahru Stainless SDN BHD, Roldan SA and Inoxfil SA, through which it operates in Europe, the Americas, Asia, Oceania and Africa.
Acindar Industria Argentina de Aceros SA (Acindar) is a Argentina-based manufacturer of the steel products. The Company operates through three business divisions. The steel business division provides billets, concrete-reinforcing bars, wire, laminated bars, ground and drawn steel for construction, standard stirrups, standard and special mesh, structural elements, welded wire beams, nails, pre-stressed strands, steel fibers for concrete and hot-rolled and cold-rolled steel shapes. The tubes business division manufactures a wide range of black welded tubes, galvanized pipes and coated tubes, as well as tubes for transporting gas and petroleum, for transporting water and other fluids and for structural and general use. The wires business division produces and markets ungalvanized wires, black wires, galvanized and annealed wires, spring wires and wire mesh. In April 2007, it announced a merger with Elmec S.A. and Performa S.A. Acindar is a member of ArcelorMittal Group.
Acos Villares SA is a Brazil-based company principally engaged in the production and export of long steel. It has industrial plants located in the municipalities of Pindamonhangaba, Mogi das Cruzes and Sorocaba, which are located in the state of Sao Paulo. As of December 31, 2009, the Company’s subsidiaries were Sidenor Villares Rolling Mill Rolls SL, which operates in Spain, and Villares Corporation of America, which operates in the United States. On February 2, 2011, the Company was incorporated by Gerdau SA and, as a result of this incorporation, it was delisted from Brazilian stock exchange on February 4, 2011.
Company Acroni is a member of steel division of SIJ – SLOVENIAN STEEL GROUP.
Acroni is a producer of flat rolled steel products. We are among the leading producers of stainless steel quarto plates and wear resistant, high tensile, tool and other special steel quarto plates.
Besides quarto plates we also produce non-oriented electrical steel and hot and cold rolled coils in special grades.
ADI ISPAT PRIVATE LIMITED (CIN NO: U27104JH2004PTC010861) was incorporated on 26th July 2004 under the supervision of it’s Directors Mr. Ashok Kr. Sarawgi, Mr. Amit Kr. Sarawgi & Mr. Sumit Kr. sarawgi. Adi Ispat Private Limited Started its manufacturing unit with a 7MT Induction Melting Furnace at its Regd.Works Manjhiladih, Gadi Srirampur Giridih, Jharkhand which started its commercial Production on August 2007 with an annual capacity of 18000MT. It is one of the leading Industries which are producing High Quality MS Ingots in this region. Adi Ispat Private Limited then expanded by adding its Second Steel Melting Shop of same capacity and its annual production capacity of MS Ingot rounded off to 36000MT from September 2009. Adi Ispat Private Limited is now in its Expansion Mode in Phased manner and in Phase II it has commissioned its Hi-Speed, Automated, and Continuous State of Art Rolling Mill Project with annual capacity of 0.3 Million Tons and started its commercial production from February 2010.
Sri Lakshmi Narayana Agarwal is a commerce graduate having vast experience in the respective field. He hails from most respectable business family and his knowledge in various aspects of business has taken the company a long way, in establishing its foot firmly. He started his career as a sole selling distributor of M/S Singereni Collieries company Ltd, from 1968 to 1984, during the period, an idea of stepping into steel business cropped up in his mind..
Height of preciseness’, the ‘apex of perfection’, and the ‘zenith of accuracy’ are three highlighted features accompanying our impressive product range. Agrasen Iron & Steel (P) Ltd. is a noted Manufacturer, Exporter, Supplier, Distributor, Trader, Importer, Stoctkist, Authorised Dealership of all types of steel structures and frames meant for various construction projects.
Our products range includes TOR Bars, MS Joists, MS Beams, I Beams, Hot Deep Galvanized Materials, Thermo Mechanically Treated (TMT) Bars, MS Channels, U Channels, C Channels, MS Flat Sections, MS Black Flat Sections, MS Angles, Equal Angles, Unequal Angles, MS Bars, Circular Cross Sections, Bright Shaft Round Bars, Bright Shaft Square Bars, etc.
We supply varied range of building materials in quantity as required by the clients at the industry’s leading prices. Our export markets are well established in Singapore, Thailand & several other countries.
We are foraying into the worldwide markets with high speed. We procure finished products from reputed sources of the industry who are popular for maintaining standard quality.
In 1984, Yingkaimo Metal Net Co., Ltd. was founded in Anping County Hebei Province, which is the hometown of wire mesh in China. It has Anping Factory, Dezhou Factory and Dubai Office with more than 500 employees. YKM’s annual value of production is about 50 million US dollars, of which 90% of products delivered to more than 70 countries and regions. It is a high-tech enterprise, also a leading company of industrial cluster enterprises in Hebei Province. YKM brand as a famous brand in Hebei Province has been registered in 17 countries around the world for trademark protection. Nowadays, YKM is one of the most competitive metal wire mesh manufacturers in Asia.
Total area of the two factories is about 156000 square meters with more than 400 sets of manufacturing machines, main machines including international advanced technology Japanese-made RGK, German-made Jager and some Chinese-made machines. Annual production capacity for stainless steel mesh is more than 10 million square meters, with range from 1 mesh to 635 mesh of square mesh and highest dutch weave 2800 mesh. The self-designed two epoxy coating production lines are the most advanced epoxy mesh coating equipment in Asia, its annual output is more than 13 million square meters and it makes YKM to be the R&D and supply center for epoxy mesh.
YKM’s main products are stainless steel wire mesh,epoxy coated wire mesh,nickel wire mesh, copper wire mesh, low-carbon steel wire mesh and all kinds of mesh further-processing products.
More information please view:https://www.china-wiremesh.com/
Welded mesh fence likewise called “3D FENCE” “medium-security fencing”. It is an affordable version of steel fence. The panel is bonded with low carbon steel wire. Material Grade: Q195, Surface therapy by Electrostatic polyester powder roaming finishing(Powder-coated) over galvanized products. And after that connect the fencing panels with article by suitable clamps(Clips). Because of its Simple framework, Easy installation and also Beautiful look.More customers regard welded wire mesh security fence as the preferred common protective fence.
Loni ChieFence 3d security fence FEATURES
Lower budget
See-through panel
Anti-rust, Long Service Life
Fast Installation
Customer specs available
Rigidity
Galvanized Steel Fiber, an alternate concrete reinforcing material are high tensile galvanized steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
Compared with the normal cold drawn steel fiber,in addition to all the advantage of normal steel fiber(such as excellent tensile strength, bending and shearing strength, high tenacity, resistance against the cracking, impact and fatigue ), this fiber still has a better corrosion resistance when the steel fiber exposure to the air, as there is a zinc thickness on the surface of this fiber.
The concrete with GuangYa steel fiber can be widely used in industrial floor,transportation constructions(roads, bridges, tunnels, airport runways), the concrete prefabricated unit, etc…
Advantage to use the China steel fiber in concrete:
High impact resistance.
Remarkably increased flexural strength.
Improved structural ductility.
Exceptional control over cracking.
Increased durability by providing crack control.
The KLS titanium-clad steel plate is a typical metallic laminar composites. It is also referred to as titanium cladding or titanium-steel bimetallics. Normally, they are created by contortion bonding: either hot/cold-roll bonding or explosive bonding. The titanium dressed steel plate gets the inexpensive and high toughness of steel with the superior corrosion resistance of titanium.
The wholesale titanium clad steel plates are widely used in numerous applications as well as services. These include petrochemical & chemical industry especially chloral alkali process, food industry, plant food sector, damp metallurgy, electroplating, vacuum salt production, aquatic engineering, smokeshaft industry, pressure vessels, heat exchangers, desalination industry, and power plant, etc.
Woven Wire Mesh BZ-S001
Material: stainless steel & brass/copper/stainless steel/aluminum
Flexibility: Not flexible
Maximum width: 2.5m
Weight: 7.3kg/m2
Open space: 43%
Surface treatment: PVDF spray paint/PVC coating/electroplating
Stainless Steel Woven Wire Mesh China Detailed instructions
Shade Series BZ woven mesh panels are made of wire or flat steel and the appearance of the mesh is usually rectangular. SHADE series products can adjust the temperature of a building by changing the opening rate and transmission of the mesh. The product can help reduce the energy consumption of buildings and is purchased using different sizes of wire and opening sizes, with a wide range of mesh specifications and appearance. Shade series mesh can be installed as a large area of the facade or used on small areas such as window, partition or handrail filling.
Decorative woven wire mesh wholesale A rainbow of colors
In order to provide customers with more color options, Bzwiremesh can use different processes to make the mesh more colorful.
Bzwiremesh uses paint, fluorocarbon coating, PVC coating or an electroplating process to color the mesh. The usual colors used are gold, champagne, silver, bronze, etc. Color selection can also be made according to the color table provided by the customer.
Bzwiremesh can also produce nets made of brass, copper and other materials with natural colors. By adding brass wire to the BZ stainless steel mesh, the mesh will become a new material.
We have cooperated with them for many years,although the amount of the monthly is not particularly large, but very stable.We mainly provide the Forklift Brackets,Forklift Shaft Accessories and other small parts.The quality of our products has been recognized by them..Our products are used in the former more,such as Excavator Parts,Excavator Brackets,Roller accessories,Bulldozer accessories,Construction Machinery Hook, Automobile Casting Parts
Hebei Huahui Valve Co.,Ltd (Botou Yaxing Fluid Equipment Co.,ltd) was established in 2003, specialize in designing and manufacturing various kinds of high quality valves and accessories, such as: Gate valve, Butterfly valve, Check valve, Strainer, Hudraulic control valve(float valve, pressure reducing valve, pressure relief valve,flow control valve),HVAC balancing valve,Air release valve,Rubber flexible joint and Stainless steel flexible joint,Pipe fittings(unicersal coupling, flange adaptor, repair clamp, saddle…) etc, which used in water supply and sewage system\ fire fighting system, and heating ventilation air conditioning system.
Hebei Huahui Valve Co.,Ltd is located in Botou Industrial Zone,Cangzhou City Hebei Province China.Our workshop occupying 150000 square meters, our manufacturing process include machining, shot blasting ,epoxy powder coating,assembling, testing, packing, which is the whole process of valve production from foundry to finished Products. Welcome old and new customers visit our factory and develop business with us.
Material: 304, 304L, 316, 316L, etc.
Weaving Pattern: Plain weave and twill wave.
Performance: Excellent resistance against acid,alkali heat,pull and wear.
Stainless Steel Wire Mesh General Use: Mud net for the oil industrial,filter screen for electroplating industrial,they all have excellent performance.
Our factory can design and manufacture various products to meet the need of user and accept customers materials for processing.
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
Stainless Steel 304 Buttweld Pipe Fittings are made up of the most commonly used 304 stainless steel material. Buttweld is the most common type of welding applied to fix pipes, fittings and other components together.
Stainless Steel Sprocket Product Description
1. Description: This range of sprockets are made from 304 stainless steel material.
2. Standard: British
3. Feauture:
Corrosion resitance
Good quality
Competitive price
Customized possible
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc.
Jade Special Metals is India’s 10th largest supplier, trader & Exporter of Stainless Steel, Carbon steel pipes and round bar. We are specialised in Stocking & Distributing various Stainless Steel, carbon steel pipes, round bar & sheet plates to worldwide for specific & urgent requirements.
What is Gate valves
Gate valves are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoid high replacement costs.
Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, a partially open gate can vibrate from the fluid flow
Gate valves are mostly used with larger pipe diameters (from 2″ to the largest pipelines) since they are less complex to construct than other types of valves in large sizes.
Main gate valve parts of a gate valve are: body, seat, gate, stem, bonnet and actuator. The main operation mechanism is very simple. When the handwheel is turned, it rotates the stem, which is translated into the vertical movement of a gate via threads.
There are three ways to classify the gate valve.
Types of Disk
Solid taper wedge
Flexible wedge
Split wedge or Parallel disks Valve
Types of Body Bonnet Joint
Screwed Bonnet
Bolted-Bonnet
Welded-Bonnet
Pressure-Seal Bonnet
Types of Stem movement
Rising Stem or OS & Y Type (Outside Stem and Screw Type)
Non-rising Stem type
Gate valvesare used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services.
Some special gate valve is used in slurry and powder product also such as knife gate valve
Hook Strip Flat Screen is one of the most commonly used screen,can be widely used in drilling operations under different conditions.
Hook Strip Flat Screen is constructed with two or three layers of stainless steel wire cloths bonded to a steel support plank.This kind of sieving screen has many characteristics as follows:
- Every wire cloth in the sieving screen has different meshes,and accurate collocation can make the screen have better effect. In the sieving screen with different meshes,the hole size of support plank is different,so as to get the most effective area on the condition of bearing enough force.
- The Stainless steel wire clothcombines steel support plank into a single closely,so as to enhance the strength of the whole screen and prolong its life.
- The wire cloth is divided into independent small surface by the gird of steel support plank,which can prevent excessive expansion of local damage.At the same time,equipped with a special rubber plug to repair damage,it can save tine and reduce the cost.
Hengying has rich production experience and mature technology, we can produce a variety of specifications hook strip flat screen according to the different needs of customers.
We, Reliable Overseas, are one of the leading wholesalers, exporters, and traders of Stainless Steel Pipes, Nickel Pipes, Inconel Pipes, and much more, established in 2010. Backed by an efficient team of qualified professionals, we are offering all these products in different stipulations.
Yoobond Service Team Provides the one-stop Solution for Primary Services needs of its sale and after-sales subdivisions.Updated suggestions and information will be provided to customers in time.
Yoobond Management team strictly follows the ISO9001:2008 Standard system,We have a series of executive sequences a more effective service supply chain to our customers consistently.
Yoobond R&D team is staffed with trained professionals that could help customers find solutions for new composite panels and General feedback . New developing products such as Special surface for Aluminum composite Products,Aluminum PVC foamed Composite panels. Aluminum MDF Composite Panels,metal composite panel and FRP PP Honeycomb composite panels which from sourcing qualified raw materials and improving the Composting production processing.
Product Name: Hot Dipped Galvanized Iron Wire
Item Code: Smart Craftsmen-HDG Wire
Surface Treatment: Electro Galvanized.
Raw Material: SAE1006 SAE1008 Q195 Q235 or Others.
Tensile Strength: 330- 550MPA
Package: Customize.
Place of Origin: Hebei, China.
Loading Port: Tianjin Port
Smart Craftsmen Galvanized iron wire is designed to prevent rust and shiny silver. It is strong, durable and versatile. It has been widely used in landscaping, construction, woven hardware cloth and mesh. Wholesale Galvanized wire is divided into hot-dip galvanized wire and electro-galvanized wire (cold galvanized wire). Galvanized steel wire has good flexibility
Sex and toughness. It has the characteristics of large thickness of galvanized layer and corrosion resistance. Hot-dip galvanized iron wire China is made of low-carbon steel wire, which is drawn, pickled, derusted, annealed and coiled.
Electro-galvanized iron wire is made of selected low-carbon steel through drawing, galvanizing and other processes. Electro-galvanized iron wire has the characteristics of thick galvanized layer, good corrosion resistance and strong galvanized layer.