We have cooperated with them for many years,although the amount of the monthly is not particularly large, but very stable.We mainly provide the Forklift Brackets,Forklift Shaft Accessories and other small parts.The quality of our products has been recognized by them..Our products are used in the former more,such as Excavator Parts,Excavator Brackets,Roller accessories,Bulldozer accessories,Construction Machinery Hook, Automobile Casting Parts
Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
We are the leading stainless steel bright bars manufacturer in India. Our stainless steel bright bars are have the corrosion resistance and heat resistance ability for different industrial applications.
- Wind turbine foundation anchor bolts manufactured by Longteng has superior strength for even the largest wind turbine projects, Longteng has 15 years of experience in providing various anchor bolts suited in all application types – whether your wind turbines are anchored in soil, on rock or across mixed ground.
Longteng has a proven track record supplying anchor cage system for onshore wind turbine foundations under Gold Wind, Envision, ReeWind, GE and other manufacturers turbines.
- High-strength structural tie rods uses carbon structural steel and alloy steel as raw material, processed by machining, heat treatment and surface anti-corrosion treatment, supplemented by adjusting sleeves, locks and joints to complete a whole set, which featured by both high tensile strength and high toughness.
- Rock bolt or rock anchor is the most basic component of the roadway support in coal mines. It plays a very important role to strengthens the surrounding rock of the roadway of mines and tunnels, it makes the surrounding rock support itself, prevent displacements of rock.
We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,
Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In The Industries Related To The
Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps & Petrochemicals,
Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.
Materials:
PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.
REGARDS
ARVIND JAIN – SALES HEAD
R-PIPE OVERSEAS
T: +91 22 6659 5201
M: +91 9930551137
Whatsapp: +91 9082065807
Skype: asj.rpipe
E: info@rpipeoverseas.com & rpipeoverseas@gmail.com
W: http://www.rpipeoverseas.com
A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,
PB Marg, Mumbai – 400008. (INDIA)
GST TIN NO.: 27ALTPJ6984G1ZB
Product Introduction
Fully threaded steel bars (or PT bars) are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension, and anchorage and the like, and is a novel material for developing the prestressed concrete components.
Company Introduction
Fully threaded steel bars are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight.
Tianjin Cathay Pacific Steel Co., Ltd., which occupies a superior geographical position and convenient transportation. We are the largest agent of Tianjin Tiantie Zhaer Steel Production Co., Ltd., and have won the honor of Sale Champion for many years!
Since the establishment of the company in 2008, our company has focused on Screw Threaded Steel products and related construction products. The products on the market are: FT Bar, its accessories: nuts, plates, couplers, spiral bars, PC strand wires and anchors, metal and plastic ducts, etc.
Our company always regards product quality as the lifeline of the company, adheres to the rigorous, efficient and innovative concept to serve customers, and we are willing to cooperate with new and old customers at home and abroad to provide customers with better quality service and quality products.
Contact Information
Tianjin Cathay Pacific Steel Co.,Ltd
Wendy Lee
Email: tjgtqc@tjgtqc.com
Phone/Wechat/WhatsApp:+86-17612275091
Vishwa Stainless Steel Pvt. Ltd. is one of India’s most trusted and fastest growing stainless steel bar manufacturing company. An ISO 9001:2015 company, Vishwa Stainless Steel Pvt. Ltd. was established in 2011 with a vision to design and manufacture stainless steel bright bars in round, square and hexagonal shapes for various industry.
With state-of-the-art manufacturing machinery, contemporary technologies and highly skilled staff are the core strength of our company. Today, Vishwa Stainless Steel Pvt. Ltd. offers a wide range of stainless steel bars for the diverse range of applications in industries like chemical, pharmaceutical, dairy, engineering, oil and gas, fertilizer, paper and pulp and many more.
The well-equipped production unit and quality assurance facility help us to achieve voluminous and qualitative production. We are currently supplying our products across India and exporting it to the various countries of the world including Turkey, UAE, USA, Germany, UK, Canada, Netherland, Poland etc.
For any inquiry email us at: sales@vishwastainless.com
Introduction:
Amman Steel Group started in 1978, has made remarkable progress over the past 39 years and it is now the leading steel producers. A group of Company, Amman Steel Corporation was initially a scrap retail and trade organization. Amman Steel Group soon expanded into the biggest integrated steel plant in the private sector in South India. It is one of the largest and most respected companies in South India with 3 Rolling Mill plants in Tamilnadu and 2 Steel making plants one in Puducherry and another in Andhra Pradesh. It is headquartered at Trichirapalli, Tamilnadu.
Ashwin Impex are one of the leading manufacturers, suppliers and exporters of stainless steel, carbon steel, alloy steel, duplex steel, high nickel alloy pipes, tubes, butt weld pipe fittings, flanges, sheets, plates, coils, round bars, rods, forged fittings, fasteners in Mumbai India.
Our Products
Stainless Steel 304 Pipe Fittings
Stainless Steel 304 Flanges
Stainless Steel 304 Fasteners
Stainless Steel 304 Sheets & Plate
Stainless Steel 304L Pipe Fittings
Stainless Steel 304L Flanges
Stainless Steel 304L Fasteners
Stainless Steel 304L Sheets & Plate
Stainless Steel 316 Pipe Fittings
Stainless Steel 316 Flanges
Stainless Steel 316 Fasteners
Stainless Steel 316 Sheets & Plate
Stainless Steel 316L Pipe Fittings
Stainless Steel 316L Flanges
Stainless Steel 316L Fasteners
Stainless Steel 316L Sheets & Plate
more info please visit us http://www.ashwinimpex.com
We are manufacturer, exporter & suppliers of high quality Inconel Round Bars. We are Manufacturing 625 round bar of high quality raw materials. These round bars are widely used in various applications industry.
Svamitva Steel Industries are one of the largest exporter, manufacturer and global suppliers of pipes, Bars, Plates, Sheets, Flats, Fasteners & Valves in various grades that are available in Aluminium, Stainless Steel, Carbon Steel, Monel, Inconel, Titanium, Copper, Hastealloy, Hot Die Steel, Aluminium Bronze alloys etc. These can be made available in different construction & specification choices as per the specific demands of the customers.
We consistently meet our customers’ needs with a sharp focus on product excellence, cost optimization and timely delivery. Our mission is to provide our clients with personal dedication and professional client service every step of the way.
For more information contact vikas@svamitvasteel.com
We take immense pleasure in introducing ourselves as one of the leading Importer, Stockiest & Suppliers:
STAINLESS STEEL :: Seamless / ERW Pipes, Pipe-Fittings, Sheets, Perforated, Sheets, Plates, Circles & Ring, Rods, Wire, Wire-Mesh, Flats, Angles, Channels, SMP Rodes Eelectro etc. of Grades TP-304,304L,316,316L,321, 309, 310, 409, 410, 410S, 420, 430, 904, 904L etc..
S.S. & M.S. Fittings :: Seamless / ERW Stainless Steel Grade 202, 304, 304L, 309, 310 310S, 316, 316L, 321,
(B/W & S/W) 409 410 430 904 904L Elbow, Tee, Reducer, Long, Short, Stub end, Flanges, Nipples, Unions, Caps, Hex, Nipple, House Nipple, Coupling, Nut Bolts, Pipe Clamps, Dairy Fittings, Tricover, Clamp & Vales, and Industrial raw material etc.
ALLOY STEEL :: Seamless / ERW Pipes, Sheets, Plates, etc. of Grades EN-8, EN-9, EN24, EN-36,
EN-353, HCHCR – WPS, D2-D3, OHNS, High Speed, Steed, Steel, Hot Die Steel, 16MNCR-5, 20MNCR-5, SAE-8620 of ASTM A-335 GR, P1,P9, P11,P12,O22,etc.ASTM A-387 GR.,515/516GR.,60,70 & IS 2062 etc.
NON-FERROUS METAL:: Copper, Brass, Aluminum, Phosper-Bronze, Monel. Nickel, Inconel, Lead, Zinc, Hastelloy B & C, Titanium, Cupro-Nickel, Gun-Metal etc.. in the form of Rounds, Plates, Sheets, Wires, Circles, flats & Tubes.
MANUFATURING :: Manufacturing of all types of Pipe Fittings and Nut Bolt, Round Machinery,
All Types of Industrial Estate Raw materials etc.
304 is a chromium-nickel austenitic stainless steel with incredible quality and astonishing utilization assurance as furnished in the reinforced condition with a normal brinell hardness of 175.Characterised by high disintegration insurance all around air damaging circumstances it indicates sublime security from most oxidizing pros, general foodstuffs, purifying courses of action, dyestuffs, most common chemicals, notwithstanding a wide collection of inorganic chemicals furthermore hot oil gases, steam start gases, nitric destructive and to a lesser degree sulphuric destructive.
Since the company was incorporated in 1951, SRMB has 4 units in Bengal and planning to set up further integrated plants in neighboring states. We among the top quality TMT bar manufacturers, providing quality TMT bars from 8 mm to 50 mm. The quality of our TMT bars is widely popular among home builders. We also provide TMT bars quality testing at selected places, so you can be sure about what you are buying. We offer competitive TMT bar prices in various places like – Bihar, Haryana, Jharkhand, Karnataka, Kerala, Rajasthan, Tripura, Uttar Pradesh, West Bengal, Assam.Visit to know more about us and what we offer.
With more than 40 years of experience and 4 manufacturing units, Multinox Inc is the most trusted and well-known manufacturer & exporter of Bars & Rods, Pipes & Tubes, Fasteners Precision Turned Components, CNC Turned Components, VMC Turned Components, CNC Machined Components for various industries like automotive, aerospace, defence, hydraulic, lighting etc.
We are Manufacturer, supplier & Exporter of Alloy Steel Pipe, Alloy Steel Flanges, Alloy Steel Fittings we also supply all types of flanges like slip on flanges, weld neck flanges, blind flanges etc
Hubei Shili Mould Material Co.,Ltd is a brand that represents and engages in manufacturing of quality tool steel products. We are highly respected as a reputable tool steel production company in Hubei, China with many years of experience. Since 1994, Hubei shili Mould Material Co., Ltd is considered as one of the oldest mould & die steel manufacturer in Hubei, China. Today, as a high-tech private company, Shili steel possesses the most technically advanced steel rolling production line in China. Over 22 years, we not only supply steel materials but also offer variety steel solutions for worldwide distributors, retailers, manufacturers and the likes. We love to experiment on different tool steel machinery based on customer demand and preference.
Over the past year, Shili manufactures a wide range of products including cold work tool steel, hot work tool steel, plastic mould steel and high-speed steel. Our main products include D2, D3, H11, H13, A2, amongst others.
For better production, Shili has independently researched and developed a production line with a dia850 rolling machine. Consequently, we acquire two patents for innovation and achieve the annual output of 80000 tons.
Furthermore, we dynamic in our procedure and technique which is flexible enough to incorporate the changing demands in the international market. Our services are tailored specifically to meet the needs of our esteemed customers. While many things have changed in the steel industry, our commitment to quality and service remains the same, with our dedication to total customer satisfaction.
We continually work to expand our outreach and business interests, to the delight of our ever increasing customer base. For more details and inquiries, kindly contact us and you could also get in-depth information about our activities right here on the website.
|
Euro Fittings manufactures and sells a wide range of buttweld fittings all over the world. To meet your regular needs and ensure you the best quality we offer a state-of-art technology with focused R&D and technical expertise. |
Victor Steel Corporation is a prominent name in manufacturing and exporting of high quality of API & Carbon Steel Seamless Pipes & Tubes in India. Victor Steel Corporation offers a commendable range of ASTM A 106 GR B, API & Carbon Steel Seamless Pipes & Tubes.
Ped certified manufacturer of PTFE COATED fasteners like bolts, nuts, washers, threaded rod. Materials included inconel, monel, hastelloy, duplex and super duplex steel fasteners. Xylan Coating, PTFE coating dacromet coating is our speciallity.
Since the past few years we have expertise in all exotic grades of fasteners meeting custom requirements if our esteemed clients varying from aeronautics to general purpose applications.
Fasteners are a crucial part of our manufacturing line.
Our manufacturing range in metric sizes ranges from m1-m150
and imperial size ranges from 1/4″-6″ and #1-#20 in numeric inch series.
some of the most known fasteners are mentioned below
Stainless steel fastener range are manufactured in the following grades
- 410 stainless steel fasteners used for martensitic applications
- 304 stainless steel fasteners used for general purpose applications
- 304l stainless steel fasteners used for cryogenic applications
- 309 stainless steel fasteners used for high temperature applications
- 310 stainless steel fasteners used for high temperature applications
- 316 stainless steel fasteners used for corrosive environments
- 316l stainless steel fasteners used for sea water applications
- 317l stainless steel fasteners used for corrosive environments with high temperature applications
- 321 stainless steel fasteners used for high temperature applications
- 347 stainless steel fasteners used for high temperature applications
- 348 stainless steel fasteners used for high temperature applications
- a286 fasteners used for high temperature applications like aerospace.
Apart from stainless steel we also produce alloyed stainless steel fasteners which are expensive as compared to austenitic and martensitic stainless steel known at nitronic stainless steel below are the grades mentioned.
for high temperature applications, a cheaper alternative as compared to nickel alloys are nemonic alloys mentioned below.
For corrosive environments we produce monel fasteners namely
Corrosion and high temperature resistance both can be achieved in the below inconel fasteners.
- inconel 600 fasteners
- inconel 603 fasteners
- inconel 602 fasteners
- inconel 601 fasteners
- inconel 625 fasteners
- inconel 617 fasteners
- inconel 718 fasteners
- inconel x 750 fasteners
- inconel 686 fasteners
high temperature fasteners generally used for aeronautics are mentioned below.
high temperature plus high corrosion resistant hastelloy fasteners are manufactured in the following four grades at torqbolt
99% pure nickel based fastners used for special applications.
titanium and aeronautics have a very old relation and particularly in the following 2 grades.
if better corrosion resistant fasteners are required as compared to stainless steel, silicon bronze and copper nickel is used.
high temperature alloy steel available at cheaper rates as compared to nickel alloys.
Super high austenitic and precipitation hardening stainless steel grades
- 330 stainless steel fasteners
- 904l stainless steel fasteners
- 254 smo fasteners
- alloy 20 fasteners
- 17 4 ph fasteners
- 15 5 ph fasteners
- al 6xn fasteners
Dual Phase stainless steel fasteners with high prep ration used for extremely corrosive environments with high toughness,
- duplex 2205 fasteners
- duplex s31803 fasteners
- duplex 2507 fasteners
- ferralium 255 fasteners
- super duplex s32760 fasteners
- s32520 fasteners
ALTA SPECIAL STEEL is specialized in supplying and exporting tool steel, mold steel and alloy steel, especially for HOT FORGED BARS
A2, D2/1.2379/SKD11, H13/1.2344/SKD61, O1/1.2510/SKS3, 1.2083/420SSESR, 1.2714, 1.2367, 1.2767, S7, A8 etc.
1) Cold work tool steel A2, D2/1.2379/SKD11, O1/1.2510/SKS3, D3/1.2080, D6/1.2436, , O2/1.2842, S1/1.2550, 1.2767, 1.2328.
2) Hot Work Tool Steel S7, H13/1.2344/SKD61, H11/1.2343, H10/1.2365, H10A/1.2885, H12/1.2606, H21/1.2581, 1.2367, 1.2787, 1.2329.
3) Plastic Mould Steel 420/1.2083/SUS420J2, 1.2316, 1.2085, 1.2713, 1.2714/SKT4, 1.2738.
4) High Speed Steel M2/1.3343/SKH51.
5) Alloy Structure Steel 4140/1.7225/SCM440, 4340/1.6582.
In here, you are gonna to get a source that continuously reliable in Quality, Pricing and Service !
1. Quality assurance
Near 30 years activity in this industry, own a material laboratory and well-equipped facilities e.g. EAF, ESR, LF, VD… we engaged
the most skillful workers from WISCO GROUP, HUBEI XINYEGANG STEEL LTD & DONGBEI SPECIAL STEEL GROUP(Taizhou workshop)
2. Pricing supports
We’d love to support our long term and healthy partners, no matter big or small companies / agents, we do our best service to you.
3. Service – Make you assured with our quality and delivery time
Always worry about the quality risk ? Spend much time and energy on keep tracking where your orders going ? DON’T NEED NOW!
Our sales person always keep you well informed on production and delivery status (not just text, but also real photos).
Most important, we will submit the “Quality Test Report” for your check before shipment.
Give us a ring or write a email to get your most reliable offer and service now ! Sales(at)specialsteel(doc)com
Stainless Steel 304 Buttweld Pipe Fittings are made up of the most commonly used 304 stainless steel material. Buttweld is the most common type of welding applied to fix pipes, fittings and other components together.
The KLS titanium-clad steel plate is a typical metallic laminar composites. It is also referred to as titanium cladding or titanium-steel bimetallics. Normally, they are created by contortion bonding: either hot/cold-roll bonding or explosive bonding. The titanium dressed steel plate gets the inexpensive and high toughness of steel with the superior corrosion resistance of titanium.
The wholesale titanium clad steel plates are widely used in numerous applications as well as services. These include petrochemical & chemical industry especially chloral alkali process, food industry, plant food sector, damp metallurgy, electroplating, vacuum salt production, aquatic engineering, smokeshaft industry, pressure vessels, heat exchangers, desalination industry, and power plant, etc.
Werner Flanges Inc. an ISO 9001:2008 certified Company manufacturing & exporting the finest quality Carbon Steel, Alloy Steel, Stainless Steel Butt Welded Pipe Fittings, High Pressure Forged Fittings & Flanges. Immediate Response, Excellent Quality, Quick Delivery and Customer Satisfaction truly define Werner Flanges Inc.
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
Wir, Fittings und Flansche ist einer der führenden Hersteller Lieferanten und Exporteure von Edelstahl, Kohlenstoffstahl, legiertem Stahl, Duplex-Stahl, Hoch-Nickel-Legierung Stumpfschweißverschraubungen, Flansche, geschmiedete Armaturen, Bleche, Platten, Spulen, Rundstangen, Stangen , Rohre, Rohre, Auslaufarmaturen in Deutschland.
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc.
Woven Wire Mesh BZ-S001
Material: stainless steel & brass/copper/stainless steel/aluminum
Flexibility: Not flexible
Maximum width: 2.5m
Weight: 7.3kg/m2
Open space: 43%
Surface treatment: PVDF spray paint/PVC coating/electroplating
Stainless Steel Woven Wire Mesh China Detailed instructions
Shade Series BZ woven mesh panels are made of wire or flat steel and the appearance of the mesh is usually rectangular. SHADE series products can adjust the temperature of a building by changing the opening rate and transmission of the mesh. The product can help reduce the energy consumption of buildings and is purchased using different sizes of wire and opening sizes, with a wide range of mesh specifications and appearance. Shade series mesh can be installed as a large area of the facade or used on small areas such as window, partition or handrail filling.
Decorative woven wire mesh wholesale A rainbow of colors
In order to provide customers with more color options, Bzwiremesh can use different processes to make the mesh more colorful.
Bzwiremesh uses paint, fluorocarbon coating, PVC coating or an electroplating process to color the mesh. The usual colors used are gold, champagne, silver, bronze, etc. Color selection can also be made according to the color table provided by the customer.
Bzwiremesh can also produce nets made of brass, copper and other materials with natural colors. By adding brass wire to the BZ stainless steel mesh, the mesh will become a new material.
Model No.: LJZ2 -450×3700
PRODUCT DESCRIPTION
Double Head Cutting Saw Equipment Feature
■ Used for aluminum profile cutting.
■ Carbide saw blade give accurate processing and high endurance.
■ The two heads can work independently and simultaneously.
■ Cutting off the required length and two end angles is available by one time processing
Double Head Cutting Saw Technical Parameter
1) Power supply: three phase, four line 380V, 50Hz
2) Saw motor: 1.5Kw x 2, 2,800r/min
3) Pulling motor: 0.55Kw, 1,400r/min
4) Working pressure: 0.4 – 0.6MPa
5) Air consumption: 200L/min
6) Cutting length: max 3,700mm; min. 400mm
7) Cutting width: max 120mm
8) Cutting height: max. 200mm
9) Cutting angle: 0° – 45°
10) Cutter feeding speed: 0 – 3m/min
11) Saw diameter specification: 450mm x 4mm x 30mm-120
12) Overall dimensions: 4,500mm x 1,100mm x 1,400mm
Processing Accuracy
■ Repeat locating length: ≤0.2mm
■ Cutting angle allowance: ±5′
■ Cutting profile surface planeness: ≤0.10mm
■ Cutting profile surface roughness: Ra12.5μm
If you want to know more, you can click here.
Model No.: LJJS-CNC-500×600
PRODUCT DESCRIPTION
CNC Corner Connector Automatic Cutting Saw Equipment Features
■ This machine is mainly for alum windows corner stake cutting, also used for cutting Alum & PVC profiles.
■ PLC auto program controlling, man-machine interface is colored touch screen, input the cutting size and quantity, then it can cut automatically.
■ Automatic feeding system take the linear guiderail and high precision ball screw, driven by stepping motor. High feeding precision and efficiency.
■ Saw blade spindle take special high accuracy spindle, end face and radial runout are less 0.01mm, cutting surface is highly polished.
■ Saw blade feeding system adopts linear guiderail, with high accuracy and high speed (can be stepless speed regulation)
■ Carbide saw blade give accurate processing and high efficiency.
■ Special workpiece clamping system, besides processing common corner stake, it can also process middle frame corner stake.
■ All closed machine body and cover, with good appearance, safe working and low noisy.
CNC Corner Connector Automatic Cutting Saw Technical Parameter
■ Power: 380V 50Hz
■ Motor Rate: 2.2Kw
■ Saw Blade Diameter: Φ500mm
■ R.P.M: 2800r /min
■ Cutting Width: 135mm
■ Automatic Profile Feeding Length: 4-600mm
■ Working air pressure: 0.5－0.8Mpa
■ Weight: 600kg
If you want to know more, you can click here.
As a Concertina Razor Wire Suppliers, share it with you.
Feature
Razor barbed wire, also known as scraper barbed wire, is a new type of protective net product developed with strong protection and isolation capabilities. The sharp knife-shaped thorn is formed into a bellows shape by a double-line buckle, which is both beautiful and chilling. Played a good deterrent effect. At the same time, the product has the advantages of beautiful appearance, good anti-blocking effect and convenient construction.
Concertina Razor Wire
Razor-barbed wire is generally used for protection in prisons. Because the blade is sharp and not easy to touch, it has a certain deterrent effect. The razor-barbed wire has a wide range of uses. It can be used for wall protection of residents and can also be used for enclosure. The anti-theft effect of the barbed wire is better than that of ordinary barbed wire, and the price is not high, so the razor barbed wire is more and more widely used.
Razor wire, also known as razor wire, is a new type of protective product developed with strong protection and isolation capabilities.
Stainless steel barbed wire is different according to the different application areas containing nickel. The effect of using 304 stainless steel in a dry indoor environment is quite good. However, if you want to maintain its appearance outdoors in the countryside and cities, you need to wash it frequently. In heavily polluted industrial areas and coastal areas, the surface will be very dirty and even rusty. However, to obtain the aesthetic effect in the outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other construction purposes. However, 316 stainless steel is best used in severely corrosive industries or marine atmospheres.
Razor nets have been widely used in military powerhouses, prisons, government agencies, banks, and living quarters, private houses, villas, doors and windows, highways, railway guardrails, and borders to protect security in various countries around the world.
Our company also has Concertina Razor Wire for Sale, welcome to contact us.
Jade Special Metals is India’s 10th largest supplier, trader & Exporter of Stainless Steel, Carbon steel pipes and round bar. We are specialised in Stocking & Distributing various Stainless Steel, carbon steel pipes, round bar & sheet plates to worldwide for specific & urgent requirements.
Established in 1996, Vintex Steel & Engg. Co. has gained immense expertise in supplying & trading of Stainless steel, carbon steel, ferrous metal etc. The supplier company is located in Mumbai, Maharashtra and is one of the leading sellers of listed products. Buy Stainless steel, carbon steel, ferrous metal in bulk from us for the best quality products and service.
High security fencing also called ‘358 FENCE’ ‘3510 fencing’ ‘antifinger fencing’ ‘clearvu fencing’. It is a high cost version of Loni ChieFence 358 anti climb mesh. The panel is welded with reduced carbon steel cable ， Material Grade: Q195, Surface treatment by Electrostatic polyester powder roaming finish(Powder-coated) over galvanized materials. And after that attach the fencing panels with message by suitable clamps(Clips). As a result of the 12.7 * 76.2 mm small mesh dimension, it is anti cut & anti finger climb.
358 high security fence China FEATURES
Anti climb
See-through panel
Anti-rust,Long Service Life
Fast Installation
Customer specs available
Rigidity
Learn more about our wire mesh via https://www.chiefence.com/
Hebei Deko Commercial Co., Ltd. (hereinafter referred to as the “DEKO”), the company is located in China’s “Land of Casting” Hebei province, DEKO mainly supplies products involved in municipal engineering and road construction and related products, such as Ductile iron Pipe, Pipe Fitting, Valve, Manhole covers, Gratings, Public Illumination, Urban Furnishing, Flange and Pipe Repair Clamp etc…. we can also produce according to the drawings and samples provided by customers, our products have been exported to Europe, Africa, Asia, Middle East and Southeast Asia etc… providing import and export business for domestic and foreign customers.
DEKO has its own fully automatic vertical production line and now we have reached a strategic cooperation with several manufacturers and become the only designated agent service by manufacturers and can be better provide customers with the best prices, excellent product quality, DEKO’s aim is: to supply the required products and high quality service for every customers and maintain long-term and stable cooperation.
Stainless Steel Sprocket Product Description
1. Description: This range of sprockets are made from 304 stainless steel material.
2. Standard: British
3. Feauture:
Corrosion resitance
Good quality
Competitive price
Customized possible
Bath Handle Pull YD-BHP12
Item no.: YD-BHP12
Description: Door Handle Pull
Sanitary Hardware Material: Aluminium/zinc alloy
Size: available, customized
Usage: bath hardware, furniture hardware
Process: die casting, machining, surface treatment
Surface: PVD finished, satin nickel, black, mirror finished, bronze, customized
Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
ductile iron pipeline wholesale have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe price list is very reasonable.
Cast iron pipe drain pipe、the cast iron sewage pipe and the cast iron gas pipe are widely used.
The wall thickness of the 150mm cast iron pipe is 6mm.
At Wonderful, we use advanced equipment to provide you with various exactness cnc machining service, including milling, turning, EDM, wire cutting, EDM and so on. Using our 3-axis, 4-axis and 5-axis CNC machining centers, our skilled machinists can use a variety of plastic and metal materials to manufacture turning and milling parts. Our CNC machining center can not only produce perfect samples for you, but also customize more small batch products for you, making us a one-stop service provider for your advanced design and small batch product needs.https://www.wdfprecision.com/
- 起源地;原产地：
-
中国天津
- 品牌：
-
国际商业中心
- 应用：
-
制作管道、切割片材、制作小工具、制作波纹板、制作容器、制作栅栏
- 类型：
-
钢卷
- 厚度：
-
0.21-0.50mm
- 标准：
-
爱思
- 宽度：
-
1501-2000MM
- 长度：
-
按要求
- 证书：
-
API、 SNI、 BIS、 SASO 、SABS 、sirm、 tisi
- 年级：
-
镀铝锌硅，SGCC，DX51D
- 涂层：
-
AZ121-Z150
- 宽容：
-
±10%
- 加工服务：
-
焊接、冲孔、切割、弯曲、开卷
- 铝含量：
-
55%
- 亮片类型：
-
零亮片
- 涂油或不涂油：
-
轻微上油
- 硬度：
-
全硬
- 交货时间：
-
15-21 天
- 产品名称：
-
镀铝硅
- 最小起订量：
-
1吨
- 表面：
-
低碳钢素面，热浸镀锌，彩色涂层