Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
- Copper mould tube( square, rectangle and round )
- Crystallizing equipment of continuous casters
- Mould cooling jacket.
- repair of copper tube moulds
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion ,and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
INNER SURFACE COATINGS
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
SPECIFICATIONS OF COPPER MOULD
Square 60 x 60 – 350 x 350 (mm)
Rectangle 120 x 160 – 180 x 300 (mm)
Diameter 100-400 (mm)
Size(mm): 90×90, 100×100, 110×110, 115×115, 120×120
130×130, 135×135, 140×140, 143×143, 150×150
155×155, 160×160, 165×165, 175×175, 180×180
200×200, 220×220, 100×170, 100×173, 130×240
150×200, 150×210, 150×220, 160×200, 160×220
150×225, 160×235, 165×225, 175×225, 180×220
200×240, 240×240, 235×235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
Threeway Steel co.,ltd is a world-class steel pipe provider, one of the largest subsidiary in Shinestar Holdings Group Co.,ltd. As the companys largest export base, we are committed to provide professional one-stop procurement service for customers with excellent quality, competitive price, convenient transportation and timely delivery. At present, customers have been all over world. Including Singapore, Vietnam, Egypt, Nigeria, Arabia, United Arab Emirates, Kuwait, Oman, Mexico, Columbia, Australia etc.In the future,Threeway steel co.,ltd devotes to bring unexpected special experience for worldwide customers by the excellent strength and abundant experience.
As the most valuable subsidiary under SHINESTAR STEEL GROUP, PRIME STEEL PIPE is the solution provider for steel pipes and fittings. We are dedicated in providing high performance-price ratio steel pipes and fittings for the oil, gas, construction, energy and petrochemical industries. In prime steel pipe, we believe honest communication, expertise in steel industry, and prompt execution lead to strong long term relationships. Our professional team provides “one-stop procurement” service to coordinate with clients projects regulation, site and terrain. We ensure the best quality of products by assigning skillful experts at every stage of activities. To keep the honesty in mind, to win reputation by trust is our principle.
We are one of the leading Suppliers and Exporters of Tube Fittings, Pipe Fittings Threaded, and Ferrule Fittings, Needle Valves, Ball valves, Manifold Valves, hex nipple in Mumbai India.
The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance.
rac valves – ball screw gate valves supplier is a type of large bore gate high pressure valve which were improved from Cameron FLS-R gate valve, its the main component of frac tree, the frac valve is often used on the top of the wellhead on high pressure oil well, can do the frac job for Isolating the fluid from the well. The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance.
Features:
Valve with Ball Screw
Ball screw structure lowers operating time
Stem structure is pressure balanced with switch indicator
wellhead equipment manufacturers Specifications:
Applies to big bore high pressure system
Working pressure:2000 PSI-20000 PSI
Connection: Flange* Thread、Union、BW
Size: 1 13/16″-7 1/16′
Working temperature:K. L .P. R .S. T. U. V
Material Class :AA.BB.CC ,DD .EE.FF.HH
Specification level: PSL1-PSL4
Performance Requirement: PR1. PR2
AQE wellhead valves Application： Oil, Chemical industry, etc.
Medium： Oil、Gas、Water.etc
Learn more information about wellhead equipment,you can visit our website.
Ceramic lined pipe is made through the self-propagating high-temperature synthesis (SHS) technique.
Self-propagating High-temperature Synthetic process
Self-propagating high-temperature synthesis (SHS) is used to describe a process in which the initial reagents (usual powders), when ignited, spontaneously transforms into products due to the exothermic heat of reaction.
The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features like abrasion resistant, heat resistant, and corrosion-resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry, etc. It has many advantages over steel pipes, cast stone pipes, and steel-plastic compound pipes.
Usage of Ceramic Lined pipe
The ceramic-lined pipe transportation has been widely used in the industries of electric power, metallurgy, coal, petroleum, chemical engineering, building materials, mechanism, and so on.
The ceramic lined elbow throughout the power, metallurgy, coal, petroleum, chemical, building materials, machinery, and other industries, and high-speed development. When lining the wear-resistant ceramic elbow to deliver high grinding material (such as ash, coal, ore powder, etc.), there is a lining of wear-resistant ceramic elbow wear fast, especially the elbow Wear faster. When lining a ceramic-lined elbow to deliver a highly corrosive gas, liquid or solid, there is a problem that the lined wear-resistant ceramic elbow is corroded and is quickly damaged.
There is a problem that it is expensive to use a heat-resistant steel pipe when the material having a higher temperature is conveyed in the lining of the wear-resistant ceramic elbow. After lining the wear-resistant ceramic elbow, these problems are solved.
The ceramic lined elbow is widely used in wear and tear of mine filling material, ore powder and tailings transportation, coal-fired power plant powder, smelting, ash and other things lined with wear-resistant ceramic elbow are also very appropriate.
The ceramic lined pipe, Elbows, Reducer, Tees, and others manufactured in our factory have been used in over 200 thermal power plants, more than 50 mines, and the industries of coal, building materials, mechanism, petroleum, and so on.
Abrasion
Ceramic layer Ceramic Lined Reducer Pipe with flange reducer Al2O3 content greater than 89%, micro-hardness HV1000-1500, which has high abrasion resistance, wear resistance more than ten times higher than carbon steel after quenching, superior tungsten carbide drill.
Application range
- coal pulverizing system of power plant pipeline, including, powder transmission pipeline, thick powder separator pipeline, coal drop pipe, combustion system of a windpipe, a secondary air pipe, three pipeline and burner pipelines, in addition to ash slagging system the discharge pipe, powder pipe, dry ash conveying pipe;
- Iron and steel plant raw material conveying pipeline, collecting pipe, dust pipe, ash pipe, ash pipe, mixing pipe, grinding export pipeline, coal pipeline, coal pipeline, separator pipe, burner radius pipe, etc.;
- Cement plant selection machine outlet pipe, choose machine inlet pipe, pipe dust pipe, vertical mill outlet pipe, circulating air duct, high-temperature air blower, lower material pipe, etc.;
- Petroleum, chemical, mining, coal, coal washing plant, smelting, paper, aluminum, building materials, powder engineering, food machinery, and other processing and conveying material pipes.
Corrosion
Ceramic materials are neutral, chemically stable, have excellent corrosion resistance and acid resistance, resistant to various inorganic acids, organic acids, organic solvents, and their degree of corrosion of stainless steel is more than ten times.
Temperature
Temperature above 2000celsius degree, long-term work in the range of -50 -900 celsius degree.
Easy welding.
The ceramic adjustable tube can be welded, flanged, flexible connectors, and other fast way links, very easy to install.
Clean and easy maintenance
Smooth walls, can prevent scaling, fouling, and self-cleaning functions. Tightness.
Remarks:
- Under the direction of the arrow diagram for the export direction.
- Bend radius is usually 1.5-5 times the diameter of steel pipe (1.5-5D).
- Othe specifications of the composite pipe can be manufactured according to the user requirements.
- The weight is calculated by theoretics, maybe have some tolerance, and real weight will be weigh-in after they finish.
Hoop strength is the resistance against radial pressure. The strength of the ceramic-lined steel composite pipe is 300 to 500MPa.
Features and Advantages of ceramic lined pipe
Ceramic Liner pipe is a high technology production technology-self-fuel high-temperature clutch synthesis method.
1). High Abrasion Resistant:
Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. The composite ceramic-lined steel elbow was used in a mining plant for about fifty thousand hours. The general service life of a common steel elbow is about 700 hours.
2). Corrosion Resistant:
Corundum is a neutral material and is acid-proof and fouling-free.
3). Heat Resistant:
Ceramic lined composite steel pipes can work under circumstances of -50 to 800 Celsius degree.
4). Lower Weight and Convenient Installation:
The ceramic-lined steel pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install.
For the pipes with the same sizes, types, and lengths, the weight of the ceramic pipe is about 1/2 of the wearable cast alloy steel pipe’s, while the cost has reduced 10%~20% per meter.
The weight of ceramic-lined steel pipe is about 1/3 of the cast stone bent pipes, 1/2 of the cast stone straight pipes.
Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion-resistant ceramic by SHS ——-Self-propagating High-temperature Synthetic process.
- The ceramic-lined steel composite pipe can be joined by welding the steel pipe layer.
- Ceramic-lined pipes can take place of expensive stainless steel, titanium, nickel, cast stone, or alloy pipes.
- Extended service life can also reduce maintenance costs.
Self-Propagating Ceramic Pipe
Self-propagating ceramic steel pipes create a new generation of abrasion and corrosion-resistant engineering pipelines.
The self-propagating ceramic steel pipe has very good wear resistance, Excellent corrosion resistance, and Excellent thermal resistance performance.
SHS-self-propagating ceramic steel pipe and elbow create a new generation of abrasion and corrosion-resistant engineering pipeline. The composite pipe is composed of three layers: ceramic, intermediate, and steel layers.
The ceramic layer is formed by molten alumina at a temperature above 2500 degrees. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the steel pipe.
Applicable Industries:
- The pipe needs excellent wear resistance property: Power plant, Mining, Sea Port, Coal Plant, And pipe for transporting the powder, slurry, sand, etc.
- Coal washing plant, pipe for transporting coal and other material.
- Pipe for transporting the melted aluminum.
- Any pipe which needs to wear protection, corrosion protection, etc.
Benefits:
- Excellent wear resistance, Alumina content of the ceramic liner is higher than 95%, Hardness HV1000-1500. The wear protection performance is more than 10 times better than carbon steel after quenching,
- Excellent corrosion resistance, stable chemical properties.
- Excellent thermal resistance performance up to 2000℃ Can be used in the area from-50℃ to 900℃ for a long time.
- Can be connected with another pipe by welding, flange and soft fast connecting, and easy installation.
BESTAR is a China-leading product service provider and exporter of steel pipe, also the most valuable subsidiary of Shinestar Holdings Group. BESTAR passed the SGS Certification of China Supplier System, ISO9001 Quality Management System Certification, ISO 14001 Environment Management System Certification, ISO45001 Occupational Health & Safety Management System Certification and CE certification, got comprehensively high score in the HuaXia D&B assessment and has been rated AAAAA credit enterprise by China Credit Evaluation Association. BESTAR, committed to provide professional service to global clients including the lowest price support, professional technical support, flexible payment methods, strong financial support, the integrated procurement program as well as comprehensive bidding program to help customers create value, has become the most reliable partner in the steel pipe industry.
ISO9001:2015, PED 2014/68/EU certified. Zhejiang Guanyu Steel Tube Co., Ltd is specialized manufacturer of High Quality Stainless Steel Tubes & Pipe, Nickel Alloy Tubing & Pipe in China. Production area covers an area of 35,000 square meters. Annual output capcity more than 10,000 metric tons.
We have built a complete quality management system and organization according to ISO 9001:2015 and PED 2014/68/EU. Quality control begin with an audit trail and continues from the point of steel melting. for the raw materials, we select the best quality raw material for our customers. right through to the finished product. This level of attention to detail extends throughout the design and manufacturing chain, all kinds inspection will be all though the producing process ensure the Stainless Steel Tubes/Tubing/Pipe and Nickel Alloy Tubes/Tubing/Pipe finished in qualified. With destructive and non-destructive tests according to standard specification and customer’s special requirement, and including verification of performance by independent third-party test houses.
Hebei Huahui Valve Co.,Ltd (Botou Yaxing Fluid Equipment Co.,ltd) was established in 2003, specialize in designing and manufacturing various kinds of high quality valves and accessories, such as: Gate valve, Butterfly valve, Check valve, Strainer, Hudraulic control valve(float valve, pressure reducing valve, pressure relief valve,flow control valve),HVAC balancing valve,Air release valve,Rubber flexible joint and Stainless steel flexible joint,Pipe fittings(unicersal coupling, flange adaptor, repair clamp, saddle…) etc, which used in water supply and sewage system\ fire fighting system, and heating ventilation air conditioning system.
Hebei Huahui Valve Co.,Ltd is located in Botou Industrial Zone,Cangzhou City Hebei Province China.Our workshop occupying 150000 square meters, our manufacturing process include machining, shot blasting ,epoxy powder coating,assembling, testing, packing, which is the whole process of valve production from foundry to finished Products. Welcome old and new customers visit our factory and develop business with us.
Steel tubes India is manufacturer and exporter of cold drawn seamless, welded and ERW steel tubes and pipes.Steel Tubes India is industrial steel pipes suppliers to Oil & Gas piping, petrochemical refineries & Chemical processing industry.We are Stockist & Supplier of Stainless Steel, Alloy Steel, Carbon Steel, Mild Steel, Nickel Alloys in form of Seamless Tubes, Welded & ERW Pipes & Tubes.
Ans Pipes Pvt Ltd | ERW, Price list rate Seamless, GI Pipe, Square, Rectangle, Hollow Section , Box Pipe, Crc, MS Pipes TATA Pipe, APL APOLLO, PRAKASH SURYA, ASIAN, HITECH, JINDAL HISSAR in Ahmedabad, Changodar, Gujarat
| STEEL PIPE, STEEL TUBE, BOX SECTION, ERW MS BLACK PIPES, GI PIPE, GALVANISED PIPES, RECTANGULAR PIPES, SQUARE PIPES, BOX PIPES, HOLLOW SECTION, APL APOLLO, JINDAL, TATA, ASIAN, SURYA, WELSPUN, HITECH |
Kamdhenu Group has in its list of manufacturing, marketing, branding and distribution of a diverse range of products including Reinforcement steel Bars, Structural steels, Binding Wire, Colour Coated Sheets, Plywood, and many more. Kamdhenu Group is the largest reinforcement bars manufacturing group in India. The group is manufacturing international quality TMT of Grade bars with best features for construction industry.
Changzhou Tengyue Special Material Technology Co., Ltd ( called in short of Tengyue SMT )
Tengyue SMT is one of leading manufacture and supplier of seamless stainless steel tubes and pipes, duplex steel tubes and pipes and nickel-based alloy steel tubes and pipes for 30+ years. With the trust and support of 500+ partners, our products are applied in more than 50 global markets.
Striving for the high-quality products and constant technological innovation, Tengyue SMT established long-term industry-university-research relations with Changzhou University and Metal Institute, Meanwhile, we actively participate in national science and technology projects and acquired the key technologies of heat transfer tube manufacturing. By carrying out continuous systematic research, the company obtained 25 national authorized patents, including the authorized invention patent closely related to the production technology of the project product “Manufacturing Process of Special Stainless Steel Tubes for Double Tube Sheet Heat-exchangers “.
Certification & Credit Obtained: ISO, Special Equipment (pressure piping components) Manufacturing Licenses and Pressure Vessel PED, etc; in 2019, it obtained E-Park legal person credit certification level A and product quality rating level B.
Manufacturing Annual Capacity: 10000tons
Dimension: OD.6.0 ~ 219.0mm, W.T. 1.0 ~ 22.0mm, Length up to 25 meters.
Materials: 304 & 316 series, duplex steel, and nickel Base alloy 6 and 8 series
Standards: GB, ASTM / ASME, JIS, EN and DIN
Products Applied in key field of petroleum, petrochemical, chemical machinery, nuclear power, boilers, heat exchangers, ships, papermaking, textiles, chemical fiber machinery, medical equipment, environmental protection and other industries.
By constantly updating the production line, improving the production process and the management system and perfecting the detection system, Tengyue Special Material wholeheartedly provides customers with high-quality and highly reliable stainless steel products.
美国联合钢铁工业有限公司（USI Group）是中国最大的钢管集团之一，成立于1989年，海外总部位于新加坡，国内总部位于中国江苏省苏州市苏州工业园区。
USI集团拥有20个分支公司，总资产：10亿美元，员工10000多人，以及6个工厂（分别位于天津，苏州和沧州市），用于生产电焊管（ERW，SSAW和LSAW），无缝碳钢管，镀锌焊接管，方形/矩形钢管，不锈钢管/盘管/板/片，管件，法兰等。
我们先进的设施以及在生产的各个阶段均具有出色的质量控制，可确保产品质量，因为由于我们优质的产品和出色的客户服务，我们赢得了客户的满意并在油气管道行业中享有良好的声誉，我们的客户包括PDVSA，NIOC，中石化，中石油等。
Nansteel Manufacturing Co.,Ltd manufacture and supply differenet steel products, like
seamless steel pipe, carbon steel pipe, stainless steel pipe, casing etc.For
more,visit:https://www.nan-steel.com/
Are you looking for steel pipes and other steel related products for construction or agriculture purpose? Then, get all types of steel equipments from the MPL Group. MPL is one of the best Steel manufacturing Industry in Hyderabad which wide variety of products ranging from MS Pipes and Tubes to Scaffolding Systems. Our products ensure best quality. Our customers are trustworthy since many years.
Steel, Iron and Steel sector in Turkey is a manufacturer and service provider agreement with the company that operates one of the most fundamental institution for many years. It performs the price, stock and production follow-up of many steel products including flat products, U profile, I steel profile, H profile, Long products such as Ipe Profile, Longitudinal Welded Pipe and Square-Box profile. Iron is needed to produce steel products in Turkey as well as domestic sales network in many countries world and make the sale.
Virgin Engineering is one of the leading and acclaimed company for manufacturing of instrument tube fittings and valves from last 20 years. Based in Mumbai, India and an ISO 9001:2015 certified company has been set the highest standards of customer satisfaction, product development, manufacturing and timely delivery. Visit virginengineers.com for more products details and information.
Rafit Metal & Alloys produces and Exports impeccable and super compound darting which incorporates: Hex screw, Hex Nuts, Stud fasteners, Threaded Bars, Washers, Hex attachments and so forth according to guidelines ASTM, ASME, DIN and UNI. The application enterprises are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/Offshore).
Unifit Metalloys is one of the leading Pipes Manufacturer, Dealer, Supplier and Exporter of Buttwelded Pipe Fittings, Socket Weld Fittings, Threaded Fittings, Forged Fittings, In India. Quality Forge and Fittings is the name of a brand trusted worldwide and used in all leading industries. Trust is the synonym for Quality Forge and Fittings.
Metal Tube Industries. is worldwide Exporter of Inconel 625 Pipe Manufacturer buy ASTM B444 Inconel 625 Seamless Pipe at lowest price in India. Buy Nickel Alloy N06625 Welded Pipe, inconel 625 stainless steel pipe suppliers in Mumbai, India. Request free quotations and connect with ASTM B444 inconel 625 clad pipe in UAE. We have our Inconel 625 Hexagonal Pipe stocking distributor in UAE, Singapore, UK, Oman, Malaysia and Europe.
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
We, Reliable Overseas, are one of the leading wholesalers, exporters, and traders of Stainless Steel Pipes, Nickel Pipes, Inconel Pipes, and much more, established in 2010. Backed by an efficient team of qualified professionals, we are offering all these products in different stipulations.
Steel grating is generally made of carbon steel, and the surface is hot-dip galvanized, which can prevent oxidation. It can also be made of stainless steel, and the steel grating has the properties of ventilation, lighting, heat dissipation, anti-skid, explosion-proof and so on.
Steel grating is a kind of steel product with square lattice in the middle, which is cross-arranged with flat steel according to a certain spacing and horizontal bars, and welded by pressure welding machine or manually. Steel grating is mainly used as gutter cover. , steel structure platform plate, steel ladder step plate, etc., the cross bar is generally made of twisted square steel.
Advantages of steel grating fence
Material saving: the most material saving method under the same load conditions, correspondingly, the material of the supporting structure can be reduced;
Reduce investment: save material, save labor, save construction period, free of cleaning and maintenance;
Simple construction: on the pre-installed support, it is fixed with bolts or welding, and it can be completed by one person;
Save construction period: the product does not need to be reprocessed on site, and the installation is very fast;
Durable: It has been hot-dip galvanized anti-corrosion treatment before leaving the factory, and has strong impact and heavy pressure resistance;
Modern style: beautiful appearance, standardized design, ventilation and light transmission, giving people an overall smooth modern feeling;
Lightweight structure: less material, light structure, and easy to hoist;
Reduce wind resistance: due to good ventilation, the wind resistance is small in case of strong wind, reducing wind damage;
Anti-contamination: no rain, snow and dust;
Other advantages: ventilation, lighting, heat dissipation, explosion-proof, good anti-skid performance;
Simple design: no need for small support beams, simple structure and simplified design
Acid and alkali corrosion ability: in the range of PH 6 to PH 12.5, a stable protective film is formed on the surface of the zinc layer, and the corrosion resistance is good.
Steel grating use
Steel grating is suitable for alloys, building materials, power stations, boilers, shipbuilding, petrochemical, chemical and general industrial plants, municipal construction and other industries. It has the advantages of ventilation and light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy to clean and easy to install.
Steel grating has been widely used in all walks of life at home and abroad, mainly used as industrial platforms, ladder treads, handrails, passage floors, railway bridge sideways, high-altitude tower platforms, drain covers, well covers, road grilles, three-dimensional It can also be used as a fence for parking lots, institutions, schools, factories, enterprises, sports fields, and garden villas.
Werner Flanges Inc. an ISO 9001:2008 certified Company manufacturing & exporting the finest quality Carbon Steel, Alloy Steel, Stainless Steel Butt Welded Pipe Fittings, High Pressure Forged Fittings & Flanges. Immediate Response, Excellent Quality, Quick Delivery and Customer Satisfaction truly define Werner Flanges Inc.
Wir, Fittings und Flansche ist einer der führenden Hersteller Lieferanten und Exporteure von Edelstahl, Kohlenstoffstahl, legiertem Stahl, Duplex-Stahl, Hoch-Nickel-Legierung Stumpfschweißverschraubungen, Flansche, geschmiedete Armaturen, Bleche, Platten, Spulen, Rundstangen, Stangen , Rohre, Rohre, Auslaufarmaturen in Deutschland.
Product Name: Hot Dipped Galvanized Iron Wire
Item Code: Smart Craftsmen-HDG Wire
Surface Treatment: Electro Galvanized.
Raw Material: SAE1006 SAE1008 Q195 Q235 or Others.
Tensile Strength: 330- 550MPA
Package: Customize.
Place of Origin: Hebei, China.
Loading Port: Tianjin Port
Smart Craftsmen Galvanized iron wire is designed to prevent rust and shiny silver. It is strong, durable and versatile. It has been widely used in landscaping, construction, woven hardware cloth and mesh. Wholesale Galvanized wire is divided into hot-dip galvanized wire and electro-galvanized wire (cold galvanized wire). Galvanized steel wire has good flexibility
Sex and toughness. It has the characteristics of large thickness of galvanized layer and corrosion resistance. Hot-dip galvanized iron wire China is made of low-carbon steel wire, which is drawn, pickled, derusted, annealed and coiled.
Electro-galvanized iron wire is made of selected low-carbon steel through drawing, galvanizing and other processes. Electro-galvanized iron wire has the characteristics of thick galvanized layer, good corrosion resistance and strong galvanized layer.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc.
| Standard Reference | Dia Type | Finish | Grade | Raw Material |
| UIC86
4DIN529 |
M20-M36 | Plain & Oiled, Oxide Black, Zinc Plated, Hot Dip Galvanized, etc |
4.6 5.6 8.8 |
Low Carbon Steel Medium Carbon Steel Alloy Steel |
Our hook bolt, anchor bolt, clip bolt have high quality and cheap price. If you have any question on product, we will give the professional answers to your short questions.
Door Handle YD-DHA01
Item no.: YD-DHA01
Description: door handle
- Suitable for uPVC doors, composite doors and wooden doors
- Reversible for right and left handed doors
- Sprung handles
- Youding Door HardwareSuitable for the most popular door locks with 92mm lock centres and 122mm fixing centres
Material: Zinc alloy, Stainless steel frame
Process: die casting, machining, surface treatment
Surface: PVD finished, satin finished, black painting, satin nickel, mirror finished, customized.
Door and window handles from YOUDING is with guarantee based on competitive price. Welcome inquiry.
Jade Special Metals is India’s 10th largest supplier, trader & Exporter of Stainless Steel, Carbon steel pipes and round bar. We are specialised in Stocking & Distributing various Stainless Steel, carbon steel pipes, round bar & sheet plates to worldwide for specific & urgent requirements.
- 起源地;原产地：
-
中国天津
- 品牌：
-
国际商业中心
- 应用：
-
制作管道、切割片材、制作小工具、制作波纹板、制作容器、制作栅栏
- 类型：
-
钢卷
- 厚度：
-
0.21-0.50mm
- 标准：
-
爱思
- 宽度：
-
1501-2000MM
- 长度：
-
按要求
- 证书：
-
API、 SNI、 BIS、 SASO 、SABS 、sirm、 tisi
- 年级：
-
镀铝锌硅，SGCC，DX51D
- 涂层：
-
AZ121-Z150
- 宽容：
-
±10%
- 加工服务：
-
焊接、冲孔、切割、弯曲、开卷
- 铝含量：
-
55%
- 亮片类型：
-
零亮片
- 涂油或不涂油：
-
轻微上油
- 硬度：
-
全硬
- 交货时间：
-
15-21 天
- 产品名称：
-
镀铝硅
- 最小起订量：
-
1吨
- 表面：
-
低碳钢素面，热浸镀锌，彩色涂层
C-shaped hooks for hanging posters and signs, store decoration and display items, and for hanging and connecting various items. These CNC Wire hooks wholesale are made of durable 2mm thick metal wire.
Other sizes can be provided on request.
A pack of 100
More information please click here.
3 Type 2 Wall Tie(CE marked)
Product Name: Type 2 Wall Tie(CE Marked)
Item Code: Smart Craftsmen-WTT2
Surface Treatment: Shiny.
Raw Material: Stainless Steel 304( Grade1 4301) or Up on your request.
Package: 250 pieces / Inner Box, 2 or 4 Inner boxes / Master Carton.
Place of Origin: Hebei, China.
Standards: PD 6697 and EN 845-1:2013+A1:2016.
The type 2 wall ties for sale are suitable for general-purpose neckties with a space between 50mm and 150mm, which can be used in European domestic residential and small commercial buildings up to 15 meters high. Smart Craftsmen Type 2 wall ties are CE marked, and the measured dynamic stiffness <113MN/m3 meets the requirements for external masonry walls
Approve the performance requirements of Document E. The test result meets the PD 6697 standard and confirms BS EN 845-1: 2013 + A1: 2016.
benefit
Answer: The specially designed safety end provides an excellent mortar key, which reduces the risk of on-site injury and prevents entanglement.
B: Clear and easy to distinguish packaging, which can be conveniently used on site when different types of wall ties are needed.
C: It is made of corrosion-resistant stainless steel, and high-strength steel wire is cold bridged to minimize heat loss.
D: Multiple drops can prevent water from flowing in any direction where the cable tie is installed.
note
Other special length and wire thickness can be provided according to customer requirements.
Material: Uncoated Thick Cast Iron.
The Enameled Cast Iron Covered CasseroleIs Thick And Durable For 60 Years. It Has No Chemical Coating And Is Evenly Heated And Not Sticky.
The Vent Hole Of The Cover Is Effectively Pressed, And The Stainless Steel Bead Screw Is Fixed For A Long Time And Is Not Easy To Loose.
Excellent Thermal Conductivity, Good Heat Preservation, Uniform Heat Conduction, Long Residual Temperature, And Added Flavor To The Stew Ingredients.If you have any question on Weining Enameled Cast Iron Covered. We will give the professional answers to your questions
As a Concertina Razor Wire Suppliers, share it with you.
Feature
Razor barbed wire, also known as scraper barbed wire, is a new type of protective net product developed with strong protection and isolation capabilities. The sharp knife-shaped thorn is formed into a bellows shape by a double-line buckle, which is both beautiful and chilling. Played a good deterrent effect. At the same time, the product has the advantages of beautiful appearance, good anti-blocking effect and convenient construction.
Concertina Razor Wire
Razor-barbed wire is generally used for protection in prisons. Because the blade is sharp and not easy to touch, it has a certain deterrent effect. The razor-barbed wire has a wide range of uses. It can be used for wall protection of residents and can also be used for enclosure. The anti-theft effect of the barbed wire is better than that of ordinary barbed wire, and the price is not high, so the razor barbed wire is more and more widely used.
Razor wire, also known as razor wire, is a new type of protective product developed with strong protection and isolation capabilities.
Stainless steel barbed wire is different according to the different application areas containing nickel. The effect of using 304 stainless steel in a dry indoor environment is quite good. However, if you want to maintain its appearance outdoors in the countryside and cities, you need to wash it frequently. In heavily polluted industrial areas and coastal areas, the surface will be very dirty and even rusty. However, to obtain the aesthetic effect in the outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other construction purposes. However, 316 stainless steel is best used in severely corrosive industries or marine atmospheres.
Razor nets have been widely used in military powerhouses, prisons, government agencies, banks, and living quarters, private houses, villas, doors and windows, highways, railway guardrails, and borders to protect security in various countries around the world.
Our company also has Concertina Razor Wire for Sale, welcome to contact us.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc. We Would Appreciate To Get Your Esteemed Enquires And Look Forward To The Pleasure Receiving Your Valuable Response.
We have cooperated with them for many years,although the amount of the monthly is not particularly large, but very stable.We mainly provide the Forklift Brackets,Forklift Shaft Accessories and other small parts.The quality of our products has been recognized by them..Our products are used in the former more,such as Excavator Parts,Excavator Brackets,Roller accessories,Bulldozer accessories,Construction Machinery Hook, Automobile Casting Parts
Stainless Steel 304 Buttweld Pipe Fittings are made up of the most commonly used 304 stainless steel material. Buttweld is the most common type of welding applied to fix pipes, fittings and other components together.
UNS S31254 / Alloy 6Mo / WNR 1.4547 / F44 / 254SMO Super Austenitic Stainless Steel
UNS S31254 is a high corrosion resistant Super Austenitic Stainless Steel and provide excellent corrosion resistance in severe corrosion environments such as high temperature seawater.
We offer a comprehensive selection of seamless/welded stainless steel pipes, including the UNS S31254 super austenitic stainless steel pipe, also known as 254SMo or WNR 1.4547. Made with high-quality materials and under strict manufacturing standards, these pipes are perfect for a variety of applications in seawater handling systems, desalination plant equipment, chemical processing, and flue gas desulphurization units.
UNS S31254 Stainless Steel Pipe Features:
– High corrosion resistance: Made with alloy UNS S31254, these pipes are highly resistant to corrosion in harsh environments, including high chloride and acidic conditions.
– High strength: The WNR 1.4547 pipes are made with a super austenitic stainless steel with high strength, making them durable and reliable for a range of applications.
– Excellent weldability: The 6mo stainless steel pipes are easy to weld and fabricate, making them a versatile solution for complex piping systems.
– Compliant with industry standards: The 254SMO Super Austenitic Stainless Steel pipes meet the manufacturing standards of ASTM A269, ASTM A312, and ASTM A213, ensuring quality and reliability.
UNS S31254 Chemical Composition (%)
| % | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu |
| Min | 17.5 | 19.5 | 6.0 | 0.18 | 0.50 | |||||
| Max | 0.02 | 1.00 | 0.030 | 0.010 | 0.80 | 18.5 | 20.5 | 6.5 | 0.25 | 1.00 |
254SMO Physical Properties：
| Density | 8.02 Mg/m³ |
| Melting Range | 1360-1405 ℃ |
UNS S31254 Stainless Steel Pipe Applications:
– Seawater handling systems: The UNS 31254 Stainless Steel pipes are ideal for use in seawater handling systems due to their high corrosion resistance and strength.
– Desalination plant equipment: The WNR 1.4547 Stainless Steel tubes are widely used in desalination plant equipment due to their ability to withstand high chloride and saltwater environments.
– Chemical processing: The UNS S31254 pipes are suitable for chemical processing due to their corrosion resistance and thermal stability.
– Flue gas desulphurization unit: The Alloy 6Mo Stainless Steel pipes are ideal for use in flue gas desulphurization units due to their resistance to acids and ability to handle high temperatures.
Manufacturing Standards:
ASTM A213
ASTM A312
ASTM A269
Also individual customer specifications, as a professional UNS 31254 Stainless Steel pipes and tubing supplier, Hengyang is committed to providing high-quality stainless steel pipes to meet the needs of our customers. Contact us today for more information on the UNS S31254 pipe and other products in our collection.
Somos un fabricante profesional de bridas, accesorios de tubería, accesorios forjados en la India, nos especializamos en la fabricación de todos los tamaños, estándar, tipo, etc. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades. Desde material no estándar altamente especializado hasta artículos listos para usar, desde la producción hasta el prototipo, desde mínimos bajos hasta corridas de fábrica, el fabricante de bridas tiene la experiencia para resolver sus requisitos más difíciles.