Zhangjiagang Huayou Tubular Co., Ltd, a Sino-Japan joint ventured company been invested by Sudian International Trading Co., Ltd and Sumitomo Corporation in 2005. We are one of special company majored in steel alloy pipe stock, sale and distributing for power plant and chemical industry. Huayou Tubular has authority of importing & exporting directly after obtaining authorization from China Minister of Commerce in Sep 2005. Company located in Zhangjiagang Economic Development Zone, closer to the Zhangjiagang gate of expressway at south, near urban and Zhangjiagang port at north. It’s a perfect position for stock, distributing and sale. We have one new warehouse with modern equipments and office building of 35,000m2. Several thousand metric tons’ steel alloy tubes such as ASME A213 T91, as well as other steel pipes required from power plant and chemical industry were available at our warehouse for year.
Sumitomo Group, well known as one of top 500 largest company in the world. His subsidiary, Sumitomo Metals is a leading manufacturer on the high performance power plant and chemical industry using steel alloy’s processing, as well as development and research. The quantity Sumitomo Metals supplied to China major boiler manufacturers, coal power plants, nuclear power plants and chemical enterprises was about 50,000 tons per year, further more stronger ability of adjustment and flexibility on supply was another highlight. We, Zhangjiagang Huayou Tubular Co., Ltd, as the partner of Sumitomo Corporation in China will combine two company’s advantage looking for Win-Win for both sides. We will cooperate with clients honest, make customer satisfy with our reliable products and excellent service and pursue become the leader on steel alloy pipe industry.
We’d like invite our partners both domestic and board growing together upon facing power industry boom. If you have any interesting in our products or company, don’t hesitate contact us.
- INTRODUCTION
Welded steel tube/pipes are made of cold rolled steel coil or galvanized steel coil, by cold-roll forming through high -frequency welded machine.
Product Features: Simpler production technical process, Higher production efficiency, Lower production cost.
There are mainly two kinds of pipes: one is Black steel tube/ pipe, the other is Pre-galvanized steel tube/pipe.
- APPLICATION
With excellent characteristics of sound surface finish, highly precise, easy to galvanize, easy to bend or reform. Steel pipes are mainly used in Pipeline, Mechanical equipment, Solar energy equipment, Steel structure engineering, Bridge fence, Auto accessories and etc.
- EVER-SHINESPECIFICATION:
Types: round tube, square tube, rectangle tube.
1) Product Name: Black steel tube / pipe
Thickness: 0.40mm~3mm
Outer Diameter: Round 0.30mm~650mm
Square: 8x8mm~500x500mm
Length: 3m~12m or any length as per customer’s requirement.
Standard: BS1387, ASTM A53, ASTM A500, ASTM A513M-06B, GB/16728-2017
Grade: Q195-Q235, 10#~45#
Technique: Cold Rolled, Hot Rolled
2) Product Name: Pre-galvanized steel tube/pipe
Thickness: 0.35mm~2.5mm
Outer Diameter: Round 0.30mm~650mm
Square: 10x10mm~100x100mm
Zinc coating: 20-275g
Length: 4m~12m or any length as per customer’s requirement.
Standard: BS1387, ASTM A53, ASTM A500, ASTM A513M-06B, GB/16728-201
More information please click here.
LANDYOUNG GRP pipe is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines.
DESCRIPTIONS
LANDYOUNG GRP pipe is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines.
Helical FILAMENT winding process(Bell and spiogot joints)
GRP Pipe is manufactured using the helical (reciprocal) filament winding process by which impregnated glass fiber reinforcement with resin are applied onto a precision steel mandrel in a prescribed pattern. Repeated application of wetted fibers results in a multi-layered structural wall construction of the required thickness.
Continuous FILAMENT winding process(Coupling joints)
GRP Pipe is manufactured on a continuous filament winding machine. This machine consists of a mandrel composed of a helical wound continuous steel band, supported by beams forming a cylindrical shape. As the formed mandrel turns creating a multi-layered structural wall of the required thickness.
Applications
- Infrastructure &Municipal
- Industrial
- Water Diversion
- Desalination
- PowerPlant
- Petrochemicals
- Oil & Gas and Marine
- Agriculture Irrigation
- Storm Water
- Cooling Water
- Hydropower penstock
Advantages
Minimum 50 years service life
LANDYOUNG GRP pıpes are manufactured with corrosion resistant non-metallic raw materials. Since corrosion is not a problem, cathodic protection and extra insulation against corrosion are not needed; thus operational expenses and difficulties do not exist.
Light weight
Weight of GRP pipe:1/4 of steel pipes; 1/10 of concrete pipes
Can be transported as nested, providing great savings
Quick and easy installation, no need for heavy and expensive equipment
Excellent hydraulic properties
Hazen Williams flow coefficient is 150(c=150). Due to the low friction losses, less pumping energy is required.compared to steel and concrete pipes, same flow rates can be ensured using smaller diameters.
No lime or deposit formation inside
Unlimited service area-application in every environment
Can be installed underground, aboveground, and also underwater.
Bell and spigot joints and coupling joints ensure total leak-tightness.
Flexible:successful experience in earthquake regions
Can be installed inside old lines for relining.
LANDYOUNG GRP pipes are environmentally friend
If you are interested in our products, please visit our website
Product Range and properties
| LANDYOUNG offers a wide product range of GRP pipes and fittings to meet Specific requirements of any project. | ||||||||||
|
||||||||||
I
Madhav KRG Group is one of the best TMT bars manufacturers. Madhav KRG Group is the largest reinforcement bars manufacturing group in India.
Hebei Pipefun Pipe and Fitting Facility Co., Ltd., is established in 2000, it is a specialized enterprise professional in producing steel pipes and pipe fittings. Choosing us to be your business partner can bring you great advantages in business!
Inner Mongolia Pusheng Iron & Steel Co,.Ltd is a comprehensive company for steel production and trading. Its business includes production, processing, distribution, logistics and import& export of steel. We have been processing and selling high quality , value add steel products to customers throughout all over the world .
Our company lies in Hohhot , inner Mongolia , it is near by BAO STEEL , The superior location provides us with quality products and reasonable prices , By creating long term relationships and building trust with clients and suppliers, Pusheng is able to offer our clients comprehensive and competitive sales packages with quality goods along with excellent customer service, establishing a firm reputation in inner mongolia ’s steel industry.
Our main products : hot rolled steel coils/sheet , cold rolled steel coils/sheet , galvanized steel coils/sheet /pipe , prepainted steel coil, corrugated sheets and tinplate coils,Ms pipe /plate, stainless steel sheet /pipe etc.
Digvijay Metals are one of the leading manufacturers, suppliers and exporters of high quality stainless steel, carbon steel, stainless steel gate roller wheel, duplex steel, super duplex steel, alloy steel, high nickel alloy, inconel, monel, hastelloy, alloy 20, Stainless Steel Architectural Products Manufacturers in India, titanium pipes, tubes, sheets, plates, coils, round bars, rods, flanges, pipe fittings and fasteners in Mumbai, India.
Our Products
Stainless Steel Glass Spigot
Stainless Steel Glass Bracket
Stainless Steel D-Bracket
Stainless Steel Glass Standoff
Stainless Steel Glass Fixing
Stainless Steel Handrail Bracket
Stainless Steel Glass Clamp
Stainless Steel Point Fixing
Stainless Steel Gate Roller Wheel
Stainless Steel Slotted Pipe
Stainless Steel Coated Angle
Stainless Steel Coated Channel
Stainless Steel Coated Profile
Stainless Steel Railing Accessories
Stainless Steel Glass Fittings
Stainless Steel Decorative Profile
Stainless Steel Tile trims
Stainless Steel T Profile
Stainless Steel C Channel
Stainless Steel U Profile
Stainless Steel L Angel
Stainless Steel PVD Coated Profiles
more info visit us http://www.digvijaymentals.com
Black painted Carbon Steel Seamless Pipe
Introduction:
ASTM A106 Grade B, ASTM A53 Grade A, Grade B, API 5L Grade B, GB/T 8162, GB/T 8163 Grade 20#
Detailed Information:
| Product Name | Black painted Carbon Steel Seamless Pipe |
| Thickness | SCH20, SCH 30, STD, SCH40, SCH80 TO SCH160 (3MM to 46MM) |
| Outer Diameter | 1/2″ to 24″ |
| Surface Treatment | Anti-rust oiled or black painting or hot dipped galvanized and so on |
| Production process | Hot rolled |
| Material | 20#, 16Mn, A53(A,B), Q345 |
| Length | General 5.8m, 6m, 11.8m, 12m and also can do as per the customer’s requirements |
| Ends | Plain and beveled end |
| Standard and Steel Grade | ASTM A106 Grade B, ASTM A53 Grade A, Grade B, API 5L Grade B, GB/T 8162, GB/T 8163 Grade 20# |
| Certificate | ISO 9001: 2008 |
| Package: | By bundle, bulk, by waterproof |
| Payment term | T/T or L/C |
https://www.hebeibona.com/seamless-steel-pipes/
Seamless pipe are made of sheet or rod-shaped solid steel, formed into solid circles called billets, which are then heated and cast in forms such as puncture rods to form hollow tubes or shells.
Navrekha Steel today are the major manufacturer, supplier and exporters of the wide range of ferrous and non-ferrous metal products. We have successfully created an important place in the market under the mentorship of Mr. Parasmal C. Shah.
As a well-known local seamless steel pipe Exporter and supplier, we produce a wide range of products mainly in materials, types and sizes. Tycoon piping contain stock and supply seamless pipes for boiler in every standard and commercially available lengths according to your requirements.
Threeway Steel co.,ltd is a world-class steel pipe provider, one of the largest subsidiary in Shinestar Holdings Group Co.,ltd. As the companys largest export base, we are committed to provide professional one-stop procurement service for customers with excellent quality, competitive price, convenient transportation and timely delivery. At present, customers have been all over world. Including Singapore, Vietnam, Egypt, Nigeria, Arabia, United Arab Emirates, Kuwait, Oman, Mexico, Columbia, Australia etc.In the future,Threeway steel co.,ltd devotes to bring unexpected special experience for worldwide customers by the excellent strength and abundant experience.
As the most valuable subsidiary under SHINESTAR STEEL GROUP, PRIME STEEL PIPE is the solution provider for steel pipes and fittings. We are dedicated in providing high performance-price ratio steel pipes and fittings for the oil, gas, construction, energy and petrochemical industries. In prime steel pipe, we believe honest communication, expertise in steel industry, and prompt execution lead to strong long term relationships. Our professional team provides “one-stop procurement” service to coordinate with clients projects regulation, site and terrain. We ensure the best quality of products by assigning skillful experts at every stage of activities. To keep the honesty in mind, to win reputation by trust is our principle.
Buy best quality of stainless steel flange from PED approved Regal Sales Corporation. We are India based manufacturer and supplier, offer a wide range of Bolts, Nuts, Set Screws, Pipe Flange, Washers and Fasteners as per DIN, ISO, ASTM and ASME Specifications on reasonable rates. Visit regalsalescorp.com now for trade inquiry.
Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
- Copper mould tube( square, rectangle and round )
- Crystallizing equipment of continuous casters
- Mould cooling jacket.
- repair of copper tube moulds
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion ,and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
INNER SURFACE COATINGS
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
SPECIFICATIONS OF COPPER MOULD
Square 60 x 60 – 350 x 350 (mm)
Rectangle 120 x 160 – 180 x 300 (mm)
Diameter 100-400 (mm)
Size(mm): 90×90, 100×100, 110×110, 115×115, 120×120
130×130, 135×135, 140×140, 143×143, 150×150
155×155, 160×160, 165×165, 175×175, 180×180
200×200, 220×220, 100×170, 100×173, 130×240
150×200, 150×210, 150×220, 160×200, 160×220
150×225, 160×235, 165×225, 175×225, 180×220
200×240, 240×240, 235×235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
Elbow- Banded Hot-dipped Galvanized Malleable Iron Pipe Fittings with BS Thread
| Product Item | Wholesale malleable iron pipe fitting: elbows, tees, sockets, bends, nipples, unions, crosses, flanges, plugs, backnuts, crosses over, round caps, etc. |
| Material | Malleable cast iron |
| Technics | Casting |
| Size | 1/8″-6″ |
| Edges | Banded, beaded or plain; with or without Ribs. |
| Malleable cast iron elbow Thread Standard | BS ANSI & DIN |
| Finish | Black, Eclectic Galvanized, Hot Dipped Galvanized, all be antirust treatment |
| Shape | Equal, Reducing |
| Grades | Heavy series, Standard series, Medium series, Light series |
| Packaging | Cartons, woven bags, wooden boxes |
| Quality Control | Excellent material, precise angles, good antirust property |
| malleable iron pipe fittings manufacturer Usage | Suitable for joining pipe lines of team, gas, oil, air |
| Certificate | ISO9001:2000; SGS Certificate |
| Others | 1.Special design available according to requirement. |
| 2.MOQ: 1000pcs. Negotialble as per type. | |
| 3.Packaging:In cartons or bags with/without pallet |
Kitchen sink copper faucet LED draw-in kitchen dishes cold and hot water faucet
Great Flexibility: Pull down sprayer with black rubber hose covers a wide range of areas for easy cleaning and washing. Copper water purification kitchen faucet Easy Operation: Single lever handle for effortless and precise water temperature and volume control. Built In LED: Water powered LED light in changing hues creates a moody ambiance and offers extra relaxation.
– The LED light is powered by water flow, and will be activated once the water is turned on.
– Constructed from solid brass for durability and reliability.
– replacement hose for kitchen faucet factory Finished in a high quality, corrosion resistant polished chrome.
– Features a 360-degree swivel pre-rinse spout design and black flexible rubber spray hose.
– Not suitable for low pressure. Minimum required water pressure is 0.1 MPa (1 bar).
– All mounting hardware and hot/cold waterlines are included.
Copper pull basin faucet cold and hot mix water bath basin faucet
Jijin Copper hot and cold basin faucet Double Spouts: Pull-out sprayer provides powerful spray or aerated stream. Filtering spout offers purified drinking water. Convenient & Efficient: Swivel design provides water at easy access. Pull-out sprayer can reach every corner for any task. Easy Operation: Double handles ensures separate, precise control over the water flow of the 2 spouts, simple in use and look.
– Please note that this Copper hot and cold basin faucet wholesale does not come with filter system.
– Constructed from solid brass for durability and reliability.
– Finished in a high quality, corrosion resistant polished chrome.
– hot and cold mixed water list kitchen faucet Features a 360-degree swivel pre-rinse spout design.
– Separate water way for filtered water.
– Includes a stainless steel pullout hose that can be extended to 23.6″ (600mm).
– Not suitable for low pressure. Minimum required water pressure is 0.05 MPa (0.5 bar).
– All mounting hardware and hot/cold waterlines are included.
We are one of the leading Suppliers and Exporters of Tube Fittings, Pipe Fittings Threaded, and Ferrule Fittings, Needle Valves, Ball valves, Manifold Valves, hex nipple in Mumbai India.
Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
ductile iron pipeline wholesale have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe price list is very reasonable.
Cast iron pipe drain pipe、the cast iron sewage pipe and the cast iron gas pipe are widely used.
The wall thickness of the 150mm cast iron pipe is 6mm.
Ductile iron feed pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
Ductile iron feed pipe supplier is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
ductile pipe manufacturer is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
Tongmao Ductile iron feed pipe have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe lengths is generally six meters, which can also be customized.
If you want to know the ductile iron pipe sizes and dimensions, please contact us
The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance.
rac valves – ball screw gate valves supplier is a type of large bore gate high pressure valve which were improved from Cameron FLS-R gate valve, its the main component of frac tree, the frac valve is often used on the top of the wellhead on high pressure oil well, can do the frac job for Isolating the fluid from the well. The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance.
Features:
Valve with Ball Screw
Ball screw structure lowers operating time
Stem structure is pressure balanced with switch indicator
wellhead equipment manufacturers Specifications:
Applies to big bore high pressure system
Working pressure:2000 PSI-20000 PSI
Connection: Flange* Thread、Union、BW
Size: 1 13/16″-7 1/16′
Working temperature:K. L .P. R .S. T. U. V
Material Class :AA.BB.CC ,DD .EE.FF.HH
Specification level: PSL1-PSL4
Performance Requirement: PR1. PR2
AQE wellhead valves Application： Oil, Chemical industry, etc.
Medium： Oil、Gas、Water.etc
Learn more information about wellhead equipment,you can visit our website.
Jiangsu Finemetal Stainless Steel Ltd is sub company of Jiangsu New Qiujing Stainless Steel Ltd.
Qiujing Stainless is a collective company, specialized in wholesaling stainless steel raw materials, and materials processing. It’s a number of famous steel factories level agents, e.g. TISCO, ZPSS, JISCO, Walsin, DF, Xinan, and also as an authorized dealer of overseas steel mills, such as COLUMBUS, NAS, ACERINOX, OUTORUMPU, ARCELOR, THYSSENKRUPP, Nippon Metal Industry, Nippon Yakin Kogyo, NSC, etc.Our products are widely used in electric furnace, boiler, pressure vessel, heating equipment, petrochemical industry, textile, and food, medical, environmental, machinery equipments, and other industry.
The main products are 310S, 1Cr25Ni20Si2, 309S, 1Cr20Ni14Si2, 253MA, 316, 316L, 316H, 316Ti, 317L, 317H, 304, 304L, 304H, 321, 200S series, 400 series and other general specifications. And also supply 2205, 2304, 2101, 2507 duplex stainless steel, S-135 Hydropower plate, Stainless composite board, precise strip steel, 904L, 800H, 600H Nickel alloy. Products are with large inventory, and various specifications. In addition, special steel and particular specifications are also available.
With 10year’s developments, our company has formed our operating features: high -temperature plate is our advantages, duplex stainless steel is highlights, and slab plates are strength. We, sincerely, hope to cooperate with you!
Wuxi Baile Steel Products Co., Ltd. is a Sino-foreign joint venture, and a large-scale iron and steel enterprise to produce hot rolled steel strip and cold rolled steel strip. With advanced equipments and excellent technology, we have an annual output of 400,000 tons high-quality hot-rolled steel strip and 200,000 tons cold-rolled steel strip, the annual sales volume is USD 2.62 millions. The main grade of our products includes: carbon steel(Q195Q215Q235), structural alloy steel, silica steel and stainless steel.
Wuxi Baile Steel Products Co., Ltd. is situated in the region of Shitangwan Industrial Park, the Northwest Suburb, and Wuxi with advantageous geographical position and convenient communication. Hu-Ning Express Way is on the north and Hu-Ning Railway, Jing-Hang Canal, No.312 National Way are on the south and Xi-Cheng Canal is on the east. The land area of the company is more than 300,000 M2, in which, the building area is 100,000 M2. There are 600 workers and staff members, including 75 various engineers, technicians and administrators with senior professional titles.
The main production equipment includes one advanced hot-rolled steel strip production line; 350450550680850 etc. 25 sets of cold-rolled steel strip reversible rolling machines; 800HC rolling machines; 5 sets of pickle line; auto-control slitting machine vertically and horizontally; 25 sets of annealing equipment, ammonia decomposition; stove of arising coal gas.
The productive craft of hot-rolled steel strip adopted the international advanced continuous rolling technology. The machine set adopted the advanced technology and equipments, such as all-digital and all-network technology control and electric closed loop. The electrical controlled system adopted the up-to-date SIEMENS S7-400 PLC Artificial Intelligent Control System (S7-400 is the quickest CPU in PLC of S7 series with DP port series), it not only satisfied the craft demand of on-the-spot production, but also provided flexible and convenient man-machine operation interface for productive operation. The DCS plan organized by computer network fully reflected the thinking of modern computer control of decentralized control and centralized management. The key of this technical reform depended on micro-tension control and closed loop control, making the automatic plan have advantage and quickness and raising output and quality.
We concept is: Quality Products, Competitive Price, and Reliable Service.
Sutor Technology Group Limited is China-based manufacturer of fine finished steel products. The Company utilizes a range of processes and technological methodologies to converts steel manufactured by third parties into fine finished steel products. The Company’s product offerings are focused on finished steel products, specifically hot-dip galvanized steel (HDG steel), and pre-painted galvanized steel, or PPGI. In addition, the Company produces acid pickled steel (AP steel), and cold-rolled steel. The Company’s three operating segments are categorized according to the Company’s three operating subsidiaries, which include Changshu Huaye, which manufactures and sells HDG steel and PPGI products; Jiangsu Cold-Rolled, which manufactures and sells HDG steel, AP steel and cold-rolled steel, and Ningbo Zhehua, which manufactures and sells welded steel pipe products.
Wuxi Goldcoral Steel Co.,Ltd is a medium stockist and distributor of stainless steel with independent import and export rights located in Wuxi City covering most species of hot-rolled and cold-rolled stainless steel coils, sheets and plates. Our major grades are 304,316L,201,430,321,310S,309S and 904L. Now we are the authorized agent of ESS , Fuxin and Jisco ,and also the agent of Zpss, Baosteel, Yongjin, Walsin, Southwest, Taishan，Baoxin and authorities from Nippon, Columbia, Arcelor Mittal and Outokumpu.
Owning a warehouse over 5000 square meters and an average stock around 3000–5000 tons and equipped with the processing equipments such as slitting-line, cutting-line, griding line, emboss machines, waterjet, laser machine and 8k machine etc., we can provide you qualified products of various specifications.
Rich resources,Fast delivery and Intimate after-sale is our always business philosophy.Through the industriousness of the staff,our current average monthly sales have reached 5,000 tons,the monthly processing volume 4,000 tons. We firmly believe that we can overcome the difficulties in the more and more fierce competition. Yes.we can！
We are looking forward to your calling!
The company is a high-tech enterprise of Jiangsu Province engaged in steel pipe production and one of Jiangsu’s first professional enterprises producing seamless steel pipes. The company and its subsidiaries mainly produce steel pipe products specified for oil well pipes and high-pressure boiler pipes. Its brand “Huanqiu†seamless steel pipe is regarded as Jiangsu Provincial Name Brand. In 2009, C90 H2S-resisting erosive oil pipe was recognized as a high-tech product by Jiangsu Provincial Science &…
UNITED STEEL INDUSTRY(USI Group) is one of the largest steel pipe groups in China,products contain a wide range of pipes,such as carbon steel pipe(SMLS/ERW/LSAW/SSAW pipe),stainless steel pipe(SEAMLESS/WELDED),alloy steel pipe.etc.
Established in 1989,headquartered in Suzhou City,Jiangsu Province,USI group has 20 branch companies,total assets:1 billion dollars,more than 10000 employees,6 own factories(locate in Tianjin and Cangzhou city) for producing steel pipes.
As one of the largest manufacturers and exporters of steel pipe in China,We offer you the best steel pipes,such as Carbon steel pipe,stainless steel pipe,seamless steel pipe,elbow,ERW,SSAW,LSAW and pipe fittings.
UNITED STEEL INDUSTRY(USI Group) is one of the largest steel pipe groups in China,products contain a wide range of pipes,such as carbon steel pipe(SMLS/ERW/LSAW/SSAW pipe),stainless steel pipe(SEAMLESS/WELDED),alloy steel pipe.etc.
As one of the largest manufacturers and exporters of steel pipe in China,We offer you the best steel pipes,such as Carbon steel pipe,stainless steel pipe,seamless steel pipe,elbow,ERW,SSAW,LSAW and pipe fittings.
Realsteel is located in Rudong, Nantong and stands within the Shanghai one and a half hour economic circle enjoying unique transporting advantages.
The company, founded in September 2006 with a registered capital of 14.18 million U.S.dollars,has two steel related factories: Nantong Yineng Color Steel Plate Co.,Ltd and Jiangsu Dongtai Metalsheet Technology Co.,Ltd, and covers an area of 1400000 square meters.Currently. The company’s assets totaled RMB 500 million and boasts more than 200 of various technical talents.
Years of accumulated practical experience,varied technical training and guidance allow us to have a strong team with strong technical capacities, providing powerful guarantee for the company to create more successes.Realsteel is a professional high-tech enterprise specialized in manufacturing CR, Galvanized/Galvalume and Pre-painted Steel Coils. The company has one Cold Roll line,one Galvanizing/Galvalume line, two Prep-painting lines,with an annual capacity 600000mt altogether. In the coming years,this capacity will reach 1 million metric tones. Our products have been exporting to Korea,Southeast Asia,Europe,Middle East,Africa and Americas. Thanks to the continuously supports of our customers, we have been a steel giant in Northern Jiangsu and the whole nation.
We are insisting on the business policy of “Service for Customer, Quality for Survival, Price for Cooperation, Credibility for Boom”.Guided by this business policy, we are equipped with sophisticated manufacturing and testing equipments, and a complete testing system has been established. Such equipments and technology guarantee that the production and testing processes are up to relevant standards, so that the products satisfy the requirements of clients doubtlessly. Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. With good quality products,competitive prices and excellent services, we have won a good reputation among customers at home and abroad. We warmly welcome friends from all over the world to cooperate with us.
Our achievements come from our adhering to the spirit of “Innovating with practical manner,go beyond to strive for excellence.”Over the years,with forward-looking strategic insight,our company persists in innovation and completes a number of technical reforms,ensuring a leading position of our products among the likewise products and winning the public’s praise.Our company,as the top 20 enterprises in Rudong County,is honored by the government and our colored steel plates of brand ‘Realsteel’ have awarded “Nantong Brand Product”, “Jiangsu High-tech Product” and “Jiangsu Brand Product”.
Realsteel has always taken the idea ‘Environmentally Friendly’ as an eternal belief firmly,and has awarded ISO14001 environmental quality system certification. We have been devoting to saving energy,reducing pollution and improving efficiency through all kinds of the improved manufacturing skills and technology. We have produced environmentally friendly products to create a blue future for the earth through our efforts and practice. We will maintain our competitive edge both technically and financially against the absolute best in our markets by continually investing in our people,equipment,processes and communication systems.
Quality and service must come first. Every company deeply understand that quality is the basic weapon for an enterprise to win. Quality is one of the factor that helped the business to achieve success, so we strive to provide qualitative business. We are keen to establish well and long-term business relationship with your esteemed company.！
Danyang City Kaixin Alloy Material Co., Ltd manufactures and sells precision expansion alloy, pure nickel alloy, soft magnetic alloy and high-temperature alloy. Our main products include: Invar36, Super Invar, Kovar, Alloy27, Alloy42, Alloy52, Purmendur 2V, Permalloy, Pure Nickel Alloy (N6), Inconel, Monel, etc. All products are made in accordance with relevant standards and inspected strictly before leaving factory. In accordance to RoHS and ISO9001:2008 standard…..
Shanghai, China Metallurgical Iron and Steel Group Co., Ltd. was founded in 1991 with a registered capital of 210 million yuan, is the nation’s leading integrated steel modern service operators, the Ministry of Commerce and the Shanghai project “Shanghai Modern Service Industry Integrated Steel Pilot” core construction unit.
Currently, the Group has established 20 provinces and cities nationwide, a wholly owned subsidiary or joint venture, more than 5,000 domestic and foreign suppliers and more than 50,000 end customers have maintained good relations of cooperation, to become China’s leading iron and steel circulation The service enterprises.
Marketing of products mainly: hot-rolled, cold-rolled, galvanized, pre-painted, stainless steel, electrical steel, profiles and other steel products;
Group’s main business is divided into four sections: Steel precision machining, steel domestic retail, steel international trade, steel supply chain derivative services (such as procurement agents, sales agents, supply chain finance, etc.).
Group’s primary business model is:
1. Social resources, demand close to purchasing. And medium-sized steel mills, traders have maintained good relations of cooperation, capable of all-round, multi-channel sourcing, provide advisory selection consulting, new product introductions varieties of steel applications, agency procurement sales.
2. The processing and sales, distribution outlets nearby. More than 200 supporting a number of processing warehouse provides storage and processing, logistics and distribution, through the processing and sales, added value.
3. The integration of customer demand, supporting the supply chain finance, China Metallurgical, banks, customers tripartite cooperation, 500 call center seats 10,101,588 VIP customer’s supply chain financial services.
Group in Shanghai, Guangzhou, Tianjin, Hangzhou, Qingdao, Ningbo, Wuxi, Foshan and other important steel hub have established a modern steel processing center, property rights are owned, it covers an area of more than 2,500 acres, more than 300,000 square meters of modern standard factory buildings, more than 100 international standard production line, the annual steel processing capacity of nearly 500 million tons of annual steel storage traffic of nearly 600 million tons. China Metallurgical steel processing center in addition to end customers cut processing services, while also providing steel warehousing and distribution services for steel mills, logistics companies, steel trading enterprises. China Metallurgical Group focused on the steel supply chain intensive, through continuous innovation and organizational change models lead the development direction of China’s modern steel service industry.
From 2004 to 2013, China Metallurgical Group nine consecutive 500 Chinese enterprises, the highest ranking for the first 165; in 2006, the World Brand Laboratory in authoritative assessment, the “Huaye Steel” China’s steel industry ranks seventh , becoming the only Chinese steel logistics industry ranked brand; 2011, China Metallurgical Group “HUAYE Huaye” brand was awarded “Shanghai Famous Brand”, 2012 Love the rule to become the Ministry of Commerce project “Shanghai Modern Service Industry Integrated Steel Pilot zone “core construction units.
China Metallurgical Group focused on the iron and steel industry, to service innovation to lead the industry, with industry as fundamental to the pursuit of excellence as the goal of steady progress!