A well screen is a filter device used as the suction portion of a well constructed in a loose or semi-consolidated aquifer. The screen allows water to enter the well from the saturated aquifer, prevents sediment from entering the well, and acts structurally as a support for the aquifer material. When considering well efficiency and the logarithmic cost to the well owner, the importance of having the right screen cannot be overemphasized.
The sieve is resistant to corrosion because it comes into contact with water. In addition, it has high strength and can keep the surrounding structure intact. The openings of the sieve can be small enough to block the large amount of formation around them. The flow of water through the screen will be uniform.
Well screens are recommended for all environmental drilling operations. It helps extend the life of the well and keeps the flow of water unrestricted. Sand and fine powder sand, these fine particles can be filtered out before there is water. Well screens help remove most of this fine material from well water.
Well screens are made from a variety of materials, ranging from rough-hewed hand designs to machine built high-efficiency and long-life models. The value of the screen depends on how much it contributes to the success of the well.
Standard:
- Large open Spaces
- Do not block the slot
- 3.corrosion resistance
- Sufficient column and collapse strength
Functions:
- Easy to develop
- Minimal scaling tendency
- Low head loss through the screen
- Control sand pumping of all types of aquifers
Slot size selection is a critical step to ensure maximum well performance. The screen is usually designed to block 50% of the stratum, and the entry speed for the screen should not exceed 1/10 or 0.1 ft per second. The velocity is calculated by dividing the well production in GPM by the screen open area in square inches.
The gap size of the screen is based on dimensional analysis of the formation sample. After analyzing the composition size of grain in the sample, grain size distribution curve
I can draw it. Several methods can be used to obtain the allocation of information about grain size. The most widely used method is to pass the material through a stacked set of brass or stainless steel sieves. During the screening process, each sieve removes a certain percentage of the whole sample; The best materials are collected in the chassis. Screening analysis not only provides the basis for determining slot sizes, but also other factors that influence screening well design.
Anping Fansi Metal Wire Mesh Factory is specialized in the production of Mesh Fence, Fence Panels, Temporary Fence series (Temporary Chain Link Fencing, Temporary Welded Mesh Fencing etc) Crowd Control Barrier, Mesh Fence, Horse Panel, Pool Fence, Welded wire Mesh, Euro Fence, Field Fence, Chain Link Fence, Gabion Box, Hexagonal Wire Netting, Studded T Post, Y Post, Peach Post, Black Wire, Glavanized Wire, Barbed Wire, Razor Wire, Insulation Nails, Fiberglass Mesh with nice design etc.
Anping Yongsheng Wire And Netting Making Co., Ltd. is a specialized manufacturer of wire mesh located in Anping County, the famous wire mesh distribution and production center of China.
As ISO9001: 2000 certified manufacturer, Yongsheng is equipped with advanced productive machine and inspection devices to ensure our products quality. We offer good quality products, excellent service, favorable prices and timely delivery and have established long term business relationship with many foreign customers in the USA, Europe, Southeast Asia, the Middle-east and other countries.
Our major products include: Stainless steel wire mesh, welded wire mesh, welded panels, hexagonal wire netting, gabion boxes, barbed wire and razor wire, galvanized wire mesh, insect screening, expanded metal and perforated metal sheets, also galvanized wire, black iron wire, stainless steel wire, etc.
Our company mainly produce:expanded metal mesh fence,expanded metal walkway mesh,please contact us.
Please do not hesitate to contact us if you are interested in any of our products. We look forward to cooperating with you!
AnShan Hong Ming Metallurgical Machinery Co., Ltd and Anshan Ying Yat Trade Co., Ltd is an integrative group corporation.
We can process cast steel, cast copper, cast aluminum and any parts that cannot be processed by machine.
We can produce heavy cast welding products. We also can produce mechanical processing products; rivet welding and heavy rivet heavy cast steel and all kinds of processing products whose weight is 10 ton – 100 ton.
We export wire, reinforced bar, plate, tube (seamless pipe, straight welded tubing, galvanized pipe, high frequency welding tube, helical tube etc), I-beam, angle bar, channel steel and any other steel.
We can design, produce, manufacture, install and test various steel rolling.
Types of service:
1. Providing model, design, manufacture, installation and commissioning as to the requirements of the customers.
2. Providing the plane design, general layout of the equipment; process design and products design of steel rolling etc. various technical design.
3. Providing long-term technical service to the customers as to their requirements.
Welcome to contact with me at asyingyi15 at 126 dot com.
Tel/Fax: 086-0412-8562501
Contact person: Cathy Xu
We are looking forward to hearing from you soon.
Safety Insect Screen Company has been manufacturing insect screen for more than 20 years, so we have rich experience about the materials, types, specifications, and applications. We have strict quality control in each link of production chain.
Material – The main material of the insect screen is the low carbon steel wire, aluminum wire, copper wire, stainless steel wire, fiberglass wire and polyethylene wire. We cooperate with reliable suppliers of material, which can guarantee the use of only high quality materials.
Production – We have more than 8 professional production lines, and our staff are extensive experience. We have regular checking and spot checking at any time. We will test the products before the goods loading. We can assure the product you receive is qualified.
Products – Our main product is insect. It has different types, such as the aluminum insect screen, fiberglass insect screen, galvanized insect screen, stainless steel insect screen, copper insect screen, plastic insect screen, epoxy coated insect screen, pet screen, invisible insect screen and stainless steel security screen. We have the whole types of the screen with full size.
Price – We are the real factory in China, so we can control the cost in many ways, such as low material cost, reduce the defect rate. We can supply the goods in most reasonable price. And if you are a good purchaser, you will get the extra discount.
Delivery time – we have 8 professional production lines and large quantity of standard screens in stock. So we can assure you will receive your goods as soon as possible.
After-sales service – working with our company, you will get the professional advice. And if you have any question, we will response within 24 hours and give you the suggestion and advice.
Give us a little trust, and you will get large satisfy.
If you want to know more about our products, you can feel free to contact with us via antimos@insectscreens.org. We are willing to cooperate with you from all over the world.
The following items in wide range of sizes and grades to suit diverse needs are readily available with us in bulk quantities.
A. STAINLESS STEEL: SHEETS, PLATES, COILS, STRIPS IN THE GRADE OF
202 , 304, 304L , 316, 316L , 316TI , 309 , 310 & 410.
B. STAINLESS STEEL: TUBES, PIPES – SEAMLESS & WELDED, PIPE FITTINGS, FLATS, RODS,WIRES, STRIPS IN THE GRADE OF 304, 304L, 316, 316L, 316TI, 309, 310 & 410.
C. PIPE FITTINGS: LIKE ELBOW, REDUCER, BEND, STUBEND, TEE, FLANGE, NUT, BOLT ETC.
* SPECIALIST IN : STAINLESS STEEL SHEETS, PLATES, COILS, STRIPS, FLAT BARS, PIPES ETC. IN ANY GRADE.
Asahi Ropes is at the frontier of delivering high quality steel wire rope solution catering to small, medium to large enterprises heavy industry, metal & mining, coal drilling, iron ore mining, marine engineering, shipping industry, construction and real-estate among others. We at Asahi believe in the philosophy “Don’t think of good, when you can achieve best”.
AZ Steel is an AZ Group enterprise based in Marano Vicentino in the province of Vicenza, in north-east Italy. The plant at Marano Vicentino covers an area of 3,000 m2 dedicating to production, 1,000 m2 to warehouse storage and 400 m2 to offices and the quality laboratories
A 500m2 sales and logistics department in Bologna c/o Giò Steel S.r.l.
A sales and logistics department in Munich, Germany Stabtec GmbH
A representative in Lahore, Pakistan
A vast network of small and medium-sized enterprises in the area between Vicenza and Padua
An export share of roughly 85%
A young team composed of 36 persons
Baoji City Changsheng Titanium Co., Ltd. is located in Baoji City, which is called “Titanium City”. We are a high-tech enterprise which mainly operates metallic titanium and titanium alloy materials.
Our factory was established in 2001. We are a professional manufacturer for processing and producing metallic titanium, as well as titanium alloy materials. At present, we have a complete production line of metallic titanium and titanium alloy materials.
There are six engineers, twelve advanced artificers, and forty production artificers in our company. Our factory is known as advanced processing technology, strong technical force, excellent quality, prompt delivery, and high credibility.
Our factory is located in Baoji, the largest Non-ferrous base of China’s Non-Ferrous Metals Processing Plant. The factory is located near Xian-Baoji Highway, possessed very convenient transport.
We own the complete production line of bar materials: forging, rolling, grinding, and machining and are able to achieve large-scale production of different thickness, different scales, varieties, and different specifications for a variety of bars, forged products like titanium ring, flange and disc etc. We also possess a production line for titanium tubes, sheets…
Our company is strictly in accordance with ISO9001:2000 quality system certification. High-effect management system will provide you best quality goods and earlier delivery time.
Your Satisfaction, is our Mission.
Baoshan Iron & Steel Co., Ltd. specializes in producing high-tech and high value-added steel products, including different types steel for automobile, household appliances, oil exploration, oil and gas transmission, shipbuilding, pressure vessel and container materials.The company exports its products to over forty countries and regions including Japan, South Korea, the United States and European Union. The company was founded in 2000 and is headquartered in Shanghai, China.
Founded in 2008,Bazhou Sanqiang Metal Articles Co.,Ltd.is a professional enterprise specializing in manufacturing cold-rolled strip steel and galvanized strip steel,register funds RMB 20 million yuan with the area of 500 Mu.There are more than 500 staffs and 180 of which are key technicians.
The company now owned 11 sets of cold-rolled equipment ,such as AGC 650# 6-roller reversible rollig equipment, 650 # 4-roller reversible rollig equipment,850 reversible rollig equipment,600 and750 5-Stand and 5-continuous, and 8 sets of the different types cutting mill, 2 sets of 750 finishing mill, 1 set of 750 flattening mill,24 groups of hood type bright annealing furnace and 4 sets of tunnel annealing furnace. On these bases, in order to meet customer demands, the company had introduced 3 advanced galvanized block production line and 1 tinning block production line. Advanced production equipment, strict management ensure the quality of product …
Beijing Hongye Metal Products Co.,Ltd. is a company manufacturing various kinds of metal wire mesh and hardware products. It is located in Zhongguancun High-tech Industry Development Zone of Beijing, the capital of China.
Hongye has its manufacturing base in Anping County, which is famous as the hometown of wire mesh. It produces diversified wire mesh&cloth, including stainless steel wire cloth, mine sieving mesh, conveyor belt, fencing, filter,etc, widely used in different industries, such as oil, chemical, coal, construction and transportation. Besides, Hongye produces stainless steel valves and fittings of different specifications. The products are exported to USA, Japan, South Korea, France, Germany and many other countries.
Far beyond supplying customers with top quality products, Hongye aims to supply customers with a whole resolving programme to meet their enquiry, application and envisaging of its all types of products. Counted on constant improving skills, rich production experience, rational stock plan and perfect service, Hongye’s business cardinal points is always to satisfy customers in high level and facilitate their profits maximization.
BEXIM is Istanbul-based Turkish company with a 10 years of international business experience.
http://bexim.jimdo.com
Bharat Aluminium Co. Ltd. (BALCO) was incorporated in the year 1965 as a Public Sector Undertaking (PSU) and since then the Company has been closely associated with the Indian Aluminium Industry, in a pivotal role.
Highlights
Government of India (GoI) divested 51% equity in the year 2001 in favour of Sterlite Industries (I) Limited. Remaining 49% is with GoI.
BALCO is playing a crucial role in introducing Aluminium as a potential alternative to other metals like Steel in construction, and Copper in power transmission industry.
Major operations of BALCO are in the town of Korba (Chhattisgarh), whereas its mines supplying high grade Bauxite are situated at Kawardha and Mainpat.
The smelter capacity (installed capacity 100 KTPA), based on Soderberg Process, is being revamped to produce 345 KTPA through modern Prebake Technology.
After disinvestment, a smelter of capacity 245 KTPA has been established in the year 2004.
The smelter plants are being supported by uninterrupted power supply through Captive Power Plants – 270 MW at Jamnipali, Korba and 540 MW at smelter site.
New power plant with rated capacity of 1200 MW is expected to commence production by the last quarter of 2011.
· Finishing lines are capable of producing high quality Ingots, Wire Rods, Billets, Busbars and Rolled products.
Bhawal Steel Agency is a Leading Importers & Exporters of Stainless Steel, Carbon Steel & Alloy Steel Pipes & Tubes, Sheets & Plates, Bar & Wire, Pipe Fitting, Flanges, Nickel Alloy and Non – Ferrous Metals. Bhawal Steel Agency was incorporated by Mr. Mehta and from then onwards a never-ending journey started to reach, satisfy and keep long lasting relationship with our old as well as new clients.
Bhawal Steel Agency is a proactive organisation engaged in supplying of quality products that meet and exceed customers’ specific requirements and thus ensure complete satisfaction. We are primarily engaged in Suppliers, Importers & Exporters of Ferrous & Non-Ferrous Metals
Bhawal Steel Agency has been a professionally managed Importer, stockist and supplier of ferrous and non-ferrous metals. We are capable of providing a vast range of materials, from stock, to suit your needs. We have the experience to solve your most difficult requirements.
Turkey and one of the leading investment in the field of Boydak Holding, laid the foundation of the world’s largest industrial enterprise … raw material supplier of Europe’s largest bed and furniture manufacturers … supporters of the industry with Sun that product and service quality … 62 thousand m2, including open 50 thousand m2, the sum Boyçelik operating in 112b m2, “a tube profiles and steel wire-arc” to 2 operates 450 staff in the company. Pipe-profile realized production in the Business pipes profile and sheet metal products with the furniture, automotive, white goods and construction sectors; Wire-arc produced in the Business steel wire, Bonel spring, S spring, LFK (Cossiflex) spring, SL (Super Lastic) bows, bags arc, off-set serves the furniture and textile industries with spring and spring carcasses. mainly in European countries USA, Turkic Republics, Middle East and North African countries before a total of 42 countries exporting Boyçelik, 2012 in pipes and profiles production capacity of 150,000 tons, steel-has brought fiber production capacity to 66,000 tons. Boyçelik, came to the fore with the quality are realized production of European quality norms and it becomes therefore preferred. TSE-ISO-EN 9000 Quality Management System, TSE-ISG-OHSAS-TS 18000 Occupational Health and Safety Management System and the required product range TSA said in the field of quality standard has all the quality standards. to be followed by the final product process from the production of raw material and all operations involving the company’s ERP system is one of the most important investments. In 2008, the ERP system selected SAP system is implemented successfully on the use of the same year. The survey was prepared by ISO, in 2008 359, which ranks 306 in 2009, in 2010, 288 in order to increase the managed Boyçelik its power to offer the products and services of the industry taking the customers’ satisfaction It will continue tomorrow as it is today to be producing power.
Brilliance MAHK operates as an importer of raw material like iron ore, chrome ore and non-metal scrap and as an exporter of long steel products, flat steel products and semi-products.
We are a company with we can do attitude. We are a renowned stockists and suppliers to many leading Indian industries. We have been in the market for more than last three decades catering very stringent quality products. The hallmark of our existence even in the adverse market is our quality supplies and prompts response to the customer’s needs.
Established on April, 1978, Camellia Metal Co., Ltd is dedicated in “Cable-tie Tensioning Tools, Cable/Wire/Wire Rope Cutters, Metal Parts for Hand Tools, Free-cutting, Alloy Steel, Carbon, Steel Bright, Carbon Steel Bright” with operations in Taiwan.
Belleville Disc Springs also was called “Disc Springs” “Conical Disc Springs”, include disc spring stacks, Corrosion Resistant Disc Springs, High Temperature / Cryogenic Disc Springs, Disc Springs for Ball Bearing, Disc Springs for Valves. Disc Springs are widely used in petrochemical, electric power, metallurgy, engineering, machine tools, national defense, and other industries.
Bearing Preload Disc Springs manufacturer Description
The Disc Spring concept was first invented by a Frenchman Louis Belleville in 1865. So, disc spring is commonly known as Belleville Springs. And sometimes it also was called “Conical disc springs” “Belleville Disc Springs” or “Belleville Washers”.
Hegong Disc Springs are conically washers and have a rectangular cross-section, which is loaded in the axial direction. It has a small volume and large energy storage compared to traditional helical springs and can be used as a single disc spring or in the stack (stack in parallel, in series or parallel & series combination).
The standards for disc springs mainly include DIN2092 (Calculation) / DIN2093 ( Quality Specifications-Dimensions ) of Germany, JIS B 2706- Japan, GB/T 1972-2005 of China and ISO 19690 : 2017 ( HEGONG SPRING ® is the drafting team member for international standard ISO 19690 : 2017 and Chinese national standard GB/T 1972-2005 ). Among them, DIN2093 is most widely used in the world.
belleville washer design are designed & manufactured according to DIN2092 & DIN2093, working for dynamic or static applications. The engineers of HEGONG SPRING® are pleased to design the springs for the specific applications together with the customer’s R&D department. Be free to contact with our engineers. Tech@DiscSpringsMFG.com.
Generally, disc springs include disc spring stacks, Corrosion Resistant Disc Springs, High Temperature / Cryogenic Disc Springs, Disc Springs for Ball Bearing, Disc Springs for Valves.
Surface Condition And Corrosion Protection:
Polish
Phosphating and oil
Mechanical Zinc Plating
Chemical Nickel Plating
Docromet / Geomet Coating
Electrophoresis
Tolerance:
The Tolerance is according to DIN2093 standards
Belleville Spring Washers exporter Specification:
The following specification table covers the “standard” sizes and some non-standard sizes. HEGONG SPRING ® customizes Belleville Disc Springs as well. The max OD is up to 1000mm. If you require the custom Belleville Disc Springs, please contact our sales engineers.
Hook Strip Flat Screen is one of the most commonly used screen,can be widely used in drilling operations under different conditions.
Hook Strip Flat Screen is constructed with two or three layers of stainless steel wire cloths bonded to a steel support plank.This kind of sieving screen has many characteristics as follows:
- Every wire cloth in the sieving screen has different meshes,and accurate collocation can make the screen have better effect. In the sieving screen with different meshes,the hole size of support plank is different,so as to get the most effective area on the condition of bearing enough force.
- The Stainless steel wire clothcombines steel support plank into a single closely,so as to enhance the strength of the whole screen and prolong its life.
- The wire cloth is divided into independent small surface by the gird of steel support plank,which can prevent excessive expansion of local damage.At the same time,equipped with a special rubber plug to repair damage,it can save tine and reduce the cost.
Hengying has rich production experience and mature technology, we can produce a variety of specifications hook strip flat screen according to the different needs of customers.
SHINESTAR STEEL GROUP CO., LTD mainly produce various carbon and alloy steel pipes including oil & gas pipe, pressure pipe, mechanical tubing, and stainless steel tube, etc.
As the most valuable subsidiary under SHINESTAR STEEL GROUP, PRIME STEEL PIPE is the solution provider for the oil, gas, construction, energy and prtrochemical industries.SHINESTAR STEEL GROUP is specialized in manufacturing superior quality steel products, and providing outstanding service for valued clients all over the world.
Hunan Great Steel Pipe Co.,Ltd is specialized in steel pipe & tube production including carbon steel pipe, seamless steel pipe, erw steel pipe, ssaw steel pipe, lsaw steel pipe, etc.
Hunan Great Steel Pipe Co.,Ltd is a world-class production and service provider of seamless pipes and welded pipes as the first subsidiary of Shinestar Group.
PEILING TECH. based in Hebei province of China and established in 2007.
We have set up our competitive advantage in the world market like garden hardware products/ fence system products / pet products and so on. Professional team, scientific management system, all of which have guaranteed us the leading position in garden field, our main market are America, Europe and Australia.
Our enterprise spirit are” focus, professional, innovation, customer first, sustainable development.”, exactly as” Specialty, Creative, Service “. We insist that” High quality is company’s greatest repayment; satisfaction of customer is the ultimate aim of us”. We devote to help our customers to be the best in their own market with our most competitive products and best service.
Our company specialized in Kennel, Wire Mesh, French Gate, Bar Gate, Entrance Door, We offer customized services, please via:https://www.peilingtech.com/
As a Concertina Razor Wire Suppliers, share it with you.
Feature
Razor barbed wire, also known as scraper barbed wire, is a new type of protective net product developed with strong protection and isolation capabilities. The sharp knife-shaped thorn is formed into a bellows shape by a double-line buckle, which is both beautiful and chilling. Played a good deterrent effect. At the same time, the product has the advantages of beautiful appearance, good anti-blocking effect and convenient construction.
Concertina Razor Wire
Razor-barbed wire is generally used for protection in prisons. Because the blade is sharp and not easy to touch, it has a certain deterrent effect. The razor-barbed wire has a wide range of uses. It can be used for wall protection of residents and can also be used for enclosure. The anti-theft effect of the barbed wire is better than that of ordinary barbed wire, and the price is not high, so the razor barbed wire is more and more widely used.
Razor wire, also known as razor wire, is a new type of protective product developed with strong protection and isolation capabilities.
Stainless steel barbed wire is different according to the different application areas containing nickel. The effect of using 304 stainless steel in a dry indoor environment is quite good. However, if you want to maintain its appearance outdoors in the countryside and cities, you need to wash it frequently. In heavily polluted industrial areas and coastal areas, the surface will be very dirty and even rusty. However, to obtain the aesthetic effect in the outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other construction purposes. However, 316 stainless steel is best used in severely corrosive industries or marine atmospheres.
Razor nets have been widely used in military powerhouses, prisons, government agencies, banks, and living quarters, private houses, villas, doors and windows, highways, railway guardrails, and borders to protect security in various countries around the world.
Our company also has Concertina Razor Wire for Sale, welcome to contact us.
An ISO 9001:2008 Certified Company, The Metal Factory is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by The Metal Factory are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes, Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
1. Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
2. Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
3. Square Stainless Steel Pipes, Round Stainless Steel Tubes, Rectangular Stainless Steel Pipes & Tubes
4. Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
5. Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
6. Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
7. LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
8. Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
9. ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
10. Galvanised Pipes as per IS:1239/I
11. Square and Rectangular Steel Pipes as per IS: 4923
12. ERW Boiler Tubes: BS 3059, ASTM A 214
13. Air Pre Heater Tubes to BS: 6323 PART V
14. Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
15. Seamless Heat Exchanger Tubes ASTM A 179
16. CDW TUBES IS: 3074 or BS 980
17. CRCA ERW Tubes to IS 3601 OR IS 3074
18. Stainless Steel Electro polished Pipes Manufacturer/Supplier
19. Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
Threeway Steel co.,ltd is a world-class steel pipe provider, one of the largest subsidiary in Shinestar Holdings Group Co.,ltd. As the companys largest export base, we are committed to provide professional one-stop procurement service for customers with excellent quality, competitive price, convenient transportation and timely delivery. At present, customers have been all over world. Including Singapore, Vietnam, Egypt, Nigeria, Arabia, United Arab Emirates, Kuwait, Oman, Mexico, Columbia, Australia etc.In the future,Threeway steel co.,ltd devotes to bring unexpected special experience for worldwide customers by the excellent strength and abundant experience.
Established in 1996, Vintex Steel & Engg. Co. has gained immense expertise in supplying & trading of Stainless steel, carbon steel, ferrous metal etc. The supplier company is located in Mumbai, Maharashtra and is one of the leading sellers of listed products. Buy Stainless steel, carbon steel, ferrous metal in bulk from us for the best quality products and service.
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main-line. It is a short piece of pipe with a lateral outlet. Pipeline Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings, widely used in pipe networks for conveying liquids and gases.
How many types of steel pipe tee?
According to material types there are:
Carbon Steel Pipe Tee
Alloy Steel Tee
Stainless Steel Tee
According to branch diameters and functions there are:
Equal Tee
According to connection types are:
Butt Weld Tee
Socket Weld Tee
Threaded Tee
Carbon Steel Tee VS Alloy Steel Tee VS Stainless Steel Tee
Carbon Steel Tee
Carbon steel tee material: ASTM A234 WPB, WPC; MSS SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, 60, 65 and 70.
ASME/ANSI B16.9 for butt weld tee fittings,
ASME/ANSI B16.11 for socket weld and threaded tee fittings.
Alloy Steel Tee
Alloy steel material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
Stainless Steel Tee
Stainless steel standards: ASTM A403 (common standard for stainless steel pipe fittings.
YARONG is leading supplier, exporter & manufacturer of pipe fitting tee in China. Our products are mainly exported to Korea, Japan, the United Arab Emirates, Saudi Arabia, Egypt, the United States, Australia, Singapore, Indonesia, Middle East countries.If any problems occur during the production process, we will be very honest and communicate with you to find a solution together.
Yoobond Service Team Provides the one-stop Solution for Primary Services needs of its sale and after-sales subdivisions.Updated suggestions and information will be provided to customers in time.
Yoobond Management team strictly follows the ISO9001:2008 Standard system,We have a series of executive sequences a more effective service supply chain to our customers consistently.
Yoobond R&D team is staffed with trained professionals that could help customers find solutions for new composite panels and General feedback . New developing products such as Special surface for Aluminum composite Products,Aluminum PVC foamed Composite panels. Aluminum MDF Composite Panels,metal composite panel and FRP PP Honeycomb composite panels which from sourcing qualified raw materials and improving the Composting production processing.
Model No.: LJZ2 -450×3700
PRODUCT DESCRIPTION
Double Head Cutting Saw Equipment Feature
■ Used for aluminum profile cutting.
■ Carbide saw blade give accurate processing and high endurance.
■ The two heads can work independently and simultaneously.
■ Cutting off the required length and two end angles is available by one time processing
Double Head Cutting Saw Technical Parameter
1) Power supply: three phase, four line 380V, 50Hz
2) Saw motor: 1.5Kw x 2, 2,800r/min
3) Pulling motor: 0.55Kw, 1,400r/min
4) Working pressure: 0.4 – 0.6MPa
5) Air consumption: 200L/min
6) Cutting length: max 3,700mm; min. 400mm
7) Cutting width: max 120mm
8) Cutting height: max. 200mm
9) Cutting angle: 0° – 45°
10) Cutter feeding speed: 0 – 3m/min
11) Saw diameter specification: 450mm x 4mm x 30mm-120
12) Overall dimensions: 4,500mm x 1,100mm x 1,400mm
Processing Accuracy
■ Repeat locating length: ≤0.2mm
■ Cutting angle allowance: ±5′
■ Cutting profile surface planeness: ≤0.10mm
■ Cutting profile surface roughness: Ra12.5μm
If you want to know more, you can click here.
Model No.: LJJS-CNC-500×600
PRODUCT DESCRIPTION
CNC Corner Connector Automatic Cutting Saw Equipment Features
■ This machine is mainly for alum windows corner stake cutting, also used for cutting Alum & PVC profiles.
■ PLC auto program controlling, man-machine interface is colored touch screen, input the cutting size and quantity, then it can cut automatically.
■ Automatic feeding system take the linear guiderail and high precision ball screw, driven by stepping motor. High feeding precision and efficiency.
■ Saw blade spindle take special high accuracy spindle, end face and radial runout are less 0.01mm, cutting surface is highly polished.
■ Saw blade feeding system adopts linear guiderail, with high accuracy and high speed (can be stepless speed regulation)
■ Carbide saw blade give accurate processing and high efficiency.
■ Special workpiece clamping system, besides processing common corner stake, it can also process middle frame corner stake.
■ All closed machine body and cover, with good appearance, safe working and low noisy.
CNC Corner Connector Automatic Cutting Saw Technical Parameter
■ Power: 380V 50Hz
■ Motor Rate: 2.2Kw
■ Saw Blade Diameter: Φ500mm
■ R.P.M: 2800r /min
■ Cutting Width: 135mm
■ Automatic Profile Feeding Length: 4-600mm
■ Working air pressure: 0.5－0.8Mpa
■ Weight: 600kg
If you want to know more, you can click here.
As the most valuable subsidiary under SHINESTAR STEEL GROUP, PRIME STEEL PIPE is the solution provider for steel pipes and fittings. We are dedicated in providing high performance-price ratio steel pipes and fittings for the oil, gas, construction, energy and petrochemical industries. In prime steel pipe, we believe honest communication, expertise in steel industry, and prompt execution lead to strong long term relationships. Our professional team provides “one-stop procurement” service to coordinate with clients projects regulation, site and terrain. We ensure the best quality of products by assigning skillful experts at every stage of activities. To keep the honesty in mind, to win reputation by trust is our principle.
Bath Handle Pull YD-BHP12
Item no.: YD-BHP12
Description: Door Handle Pull
Sanitary Hardware Material: Aluminium/zinc alloy
Size: available, customized
Usage: bath hardware, furniture hardware
Process: die casting, machining, surface treatment
Surface: PVD finished, satin nickel, black, mirror finished, bronze, customized
Wir, Fittings und Flansche ist einer der führenden Hersteller Lieferanten und Exporteure von Edelstahl, Kohlenstoffstahl, legiertem Stahl, Duplex-Stahl, Hoch-Nickel-Legierung Stumpfschweißverschraubungen, Flansche, geschmiedete Armaturen, Bleche, Platten, Spulen, Rundstangen, Stangen , Rohre, Rohre, Auslaufarmaturen in Deutschland.
Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
ductile iron pipeline wholesale have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe price list is very reasonable.
Cast iron pipe drain pipe、the cast iron sewage pipe and the cast iron gas pipe are widely used.
The wall thickness of the 150mm cast iron pipe is 6mm.
Roopam Steel is top manufacturer & supplier of seamless steel pipe welded tubes in ferrous and non ferrous material, Stockist of high quality tubular piping products and accessories in India. Call us for more Info at +91-22-6639 4333.