We, as a professional manufacturer in the steel and metal industrial field for more than 24 years, can offer lots of products like steel ingot, forged round bars and forgings along with a wide range of service, including melting, forging, machining, heat treatment, international logistics etc.
Our products are available in a wide range of steel grades, such as carbon steel like 1045, 1020 and S355J2G3, nickel steel like 4340, 39CrNiMo3 and 34CrNiMo6, tool steel like D2, P20 and H13, structural steel like 42CrMo4, EN19 and 4118, stainless steel like 420, spring steel like 9260 and 6150, bearing steel like EN31 etc.
Being rich in its variety, our products meet the customers’ all kinds of needs, including forged round bar, square bar and plate, open-die forgings, forged shaft, roll, cylinder and pipe, mandrel, basic shaft, cutter shaft and transmission shaft, working roll, back-up roll and leveller roll, by the size of dia.80-1000mm. All stages of production, from melting through to the final product, are conducted in-house.
To certify the high quality, our mill and products have already been appproved by ISO 9001:2000, CCS (China Classification Society), GL (Germanischer Lloyd),LR (Lloyd’s Register) and KR (Korean Register of Shipping). At present, our products have been widely exported to USA, UK, Germany, Italy, Argentina, Korea, Australia, South Africa, Sweden and India, more than 20 countries and regions.
Our outstanding quality, efficiency and speedy have been gotten our customer’s high appreciation which are greatly due to our full-equipped facilities and high-standard technical staff. On the production line, there are streamline equipment including two sets of 50t Electric Arc Furnace (EAF), two sets of 60t LF refining furnaces, one set of 60t vacuum degassing refining furnace, four sets of 1-20t electroslag remelting furnaces, four sets of high-speed forging units of 800t, 1600t, 2000t and 4500t and three sets of 5t electro-hydraulic hammers. Also, there are all sorts of facilities to test the chemical component, mechanical properties and other technical data, such as Spectrograph, Microscope, Cupping machine and -60℃ low-temperature impact testing machine etc.
Established in the year 1980, we, “Ubique Alloys”, are one of the prominent firms involved in stocking, supplying and exporting a remarkable range of Nitronic, Stainless Steel, Monel, Titanium and Aerospace Material. The range offered by us encompasses Nitronic Rod, Nitronic Pipe, Nitronic Circle, Nitronic Round Bars, Stainless Steel Round Bars, Stainless Steel Fittings.
We are one among the most recognized and sought after manufacturers, exporters and suppliers of industrial supplies which includes stainless steel pipes & pipe fittings, tubes & tube fittings, flanges, fasteners, bars, sheets, plates, coils etc. Owing to our stringent quality measures, we are confident that our range is at par with the international standards and are capable of meeting demands of our clients.
Under the able guidance of our mentor, we have come a long way since our beginning and are still progressing with full vigor to surpass all heights in the industry. Leveraging on our ultra-modern designing and fabrication facilities, we are further able to customize our range as per the needs of our clients.
Designed to perfection, our range of industrial supplies has received an overwhelming response from clients based across the globe. Further, maintaining consistency in our quality standards, meeting consignment deadlines and following ethical business practices have helped us to etch a reputable position in the highly competitive industry. Our range includes stainless steel fabrication services, industrial flanges, steel flanges, stainless steel flanges, duplex stainless steel flanges, carbon steel flanges, alloy steel flanges, nickel alloy flanges, alloy flanges, monel alloy flanges, hastelloy flanges, titanium alloy flanges, alloy-20 flanges, copper alloy flanges, stainless steel products, stainless steel pipes, stainless steel tubes, stainless steel butt weld fittings, stainless steel forged pipe fittings, stainless steel olets, stainless steel fasteners, stainless steel plates, stainless steel sheets, stainless steel round bars, duplex stainless steel products, duplex pipes, duplex tubes, duplex butt weld fittings, duplex forged pipe fittings, duplex olets, duplex fasteners, duplex plates, duplex sheets and duplex round bars.
Infrastructure
We have established a state-of-the-art infrastructure at Mumbai, maharashtra, India, to manufacture a quality range of Steel Pipes, rods, wire, pipe fittings etc.. This facility spread over a sprawling area and is segregated in separate sections for an effective rate of production. Its various sections are:
Manufacturing unit with assembly shops
Quality control unit
Research and development unit
Warehousing and packaging unit
All these units are lead by efficient professionals who work in close co-ordination to offer our clients an extensive range of Thermally & Mechanically Treated Steel & Reinforced Steel. Our manufacturing unit is equipped with requisite advanced and latest machines such as CNC machines & special – purpose machines. Through this infrastructure facility, we are capable of meeting the bulk requirements of Construction Industry with a quality product range in timely manner.
Quality
Quality is the hallmark of Ramesh Steel Corporation. Being a quality conscious company, we work towards the attainment of offering quality and durable range of hastelloy products, hastelloy pipes, hastelloy tubes, hastelloy butt weld fittings, hastelloy forged pipe fittings, hastelloy olets, hastelloy fasteners, hastelloy plates, hastelloy sheets, haselloy round bars, titanium products, titanium pipes, titanium tubes, titanium butt weld fittings, titanium pipe fittings, titanium olets, titanium fasteners, titanium plates, titanium sheets, titanium round bars, alloy-20 products, stainless steel fabrication services, alloy-20 pipes, alloy-20 tubes, alloy-20 butt weld fittings, alloy -exporter0 forged pipe fittings, alloy-20 olets, alloy-20 fasteners, alloy-20 plates, alloy-20 sheets, alloy round bars, copper alloy products, copper alloy pipes, copper alloy tubes, copper butt weld fittings, copper alloy forged pipe fittings, copper alloy olets, copper fasteners, copper plates, copper sheets, copper round bars, customized fabrication, fabrication services and customized fabrication services. At our quality department, we have all the requisite tools
SUPER METAL MANUFACTURING CO.
We Super Metal Manufacturing Co. { an iso 9001 : 2008 certified company } based in Mumbai , India since 1965 and is engaged in premier manufacturer importer , exporter , supplier & global trading of wide range pipes , tubes , fittings , flanges , fasteners , sheets , coils , plates , round bars , hex bars , flats , nut & bolt , angle , channel , structural steel items etc.
We have direct association with the reputed manufacturers holding certifications like iso, ped, api etc.
Backed with the global manufacturer base we supply materials directly from the mills or manufacturing facility to the project site or target destination & thus keep our supplies economical by eliminating the extra cost of import, stocking & then export.
All our shipments are covered with insurance to protect everyone involved.
We are in a capacity to meet requirements of any standard or customized specifications & of any volume.
Keeping in view the ongoing project emergencies we can also arrange ready stock materials through our global stockiest network.
Our products are widely applicable in industries like power , clean energy , nuclear , petrochemicals , oil & gas , off-shore & on-shore , construction , cement , steel , textiles , pharmaceuticals , fertilizers , chemicals , distilleries , sugar, ship building , marine , paper & pulp , dairy , fire prevention & protection etc.
Kindly refer to the attached introduction letter for our product range.
Detail size & dimension range of our products are available on request.
Apart from the available range we are confident to meet any type of customized client / project requirements.
All our products are manufactured & supplied as per all international material standards & dimension specifications like astm, asme, ansi, awwa, api, din, en, iso, bs, jis, is etc.
We supply only quality materials tested from govt approved labs or reputed third party inspection agencies like bv, dnv, lr, tuv, sgs, ibr etc.
We take this opportunity with immense pleasure to introduce ourselves as one of the leading stockiest and suppliers of Tubes in Titanium Grade 1, 2 & 5, Monel 400 & K-500, Nickel 200 & 201, Hastelloy ‘B’, ‘C’ & C-22, Alloy 20, Alloy 904L, Duplex Stainless Steel, Super Duplex Stainless Steel , Inconel 600 & 800 & Cupro-Nickel etc.
We also have special category materials such as Beryllium Copper , Niobium , Tantalum , Nickel Nichrome , Nimonic , NiSilver , CuNi , AB1&2 , Tungsten Mn , Al Zr , PB Nickel Alloy , Grade 630 (17-4PH), 32205 (2205) & Grade-446. All the above materials can be supplied in the form of Rounds, Bars, Flats, Pattas, Circles, Hexagonal , Sheets & Plates.
Our other range of materials include, Stainless Steel Seamless / ERW Pipes, Sheets, Perforated Sheets, Plates, Circles, Rods, Wire, Wire-Mesh, Flats Angles, Channels etc. of Grades TP-304, 304L, 316, 316L, 321, 309, 309S,
SUPER METAL MANUFACTURING CO. was formed in the year 1965. In the past 50 years of business terms, SUPER METAL MANUFACTURING CO. has made a vertical growth and now its operating through out the country and our clientele also spreads globally.
Foreword
This Reference Book Has been complied to provide our customers with as complete a picture as possible of the wide variety of Steel, Aluminum, Stainless Steel, Brass, Copper, Nickel, Chain and associated products, and Aircraft Alloys which we carry in stock and the pre-processing services which we are equipped to provide. Most items listed are normally available for immediate shipment. Our experienced personnel and modern distribution plants ensure efficient handling and rapid shipment of orders. For ready reference we have included technical information relating to the various products. Bulletin which we have available on request give more detailed information on certain products. Our staff is available to help with your technical problems and we welcome your inquiries. We have been serving industry with quality
Priorities :
- Guaranteed Quality.
- Adherence to delivery Schedule.
- Competitive Price.
Exemplary Service.
SUPER METAL MANUFACTURING CO. has a committed man power strength drawn from reputed organization those are ready to serve 24*7.
Maintaining long term relation is our ultimate goal. A satisfied customer is our valuable asset.
PRODUCTS
Large Diameter pipes:
- Stainless Steel Pipe (welded) 1” NB to 40” NB. In schedule-5, schedule 10,
Schedule20, schedule40 and also special wall thickness is formed on 800 M.
- Press Brakes Hydraulic Press in length upto 6.0 to 7.0 meters. This section
Produces S. S. Pipes (Welded) as per ASTM A – 358 by TIG welding and filler materials is used.
- The large diameter pipe is then sized & straightened to meetovality and
dimensional requirements of the applicable specifications. Testing, according to specifications, is then performed by either X-ray or Hydrostatic method.
Final marking to size, grade & specifications is done prior to final visual inspection before dispatch.
- Chemical, physical and hydrostatic tests are done regularly since input raw materials are taken into the factory and during processing till dispatching of the finished product.
Pipes & Tubes:
- Stainless Steel: ASTM A312 TP 304 / 304L / 304H / 316 / 316L / 317/ 317L / 321 /310 / 347 / 904L ETC.
- Carbon Steel: ASTM A53 GR. B / A 106 GR. B / API 5L GRADE B / API 5LGR. X42 / 46 / 52 / 56 / 60 / 70 / A333 GR. 6
- Alloy steel: ASTM A335 GR. P1 / P5 / P9 / P11 / P22 / P91 /
- Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High, Speed Steel, Zinc, lead, Incoloy-600H etc.
- Size: upto 24”NB (Seamless & Welded) Wall Thickness: Schedule 5S to Schedule XXS.
All these materials are available in NB size as well as 0d size in all grades.
We can also arrange pipes and tubes as per the customers requirements, which is other than the standard sizes.
Sheets, Plates & Coils:
- Material Grade : Stainless Steel, Nickel Alloy, Carbon Steel, Pressure Vessel Steel, Marin Construction Steel, Abrasion Resistant Steel Alloy Steel, Other Ferrous & Non-Ferrous metals etc.
- Types: Sheet, Plates, Strips, Round Bars, Wires Channel, etc. We are direct importers of sheets, Plates and Coils in all sizes and qualities in Stainless steel from the BEST manufacturers to give you the Ultimate in Quality. Also requirements of Copper, Brass, & MS qualities can be met at ease.
Other Items:
- Stainless Steel:-Rods / Flats / Pipe / Sheets / Coil Aluminium, Tubes, Angles, Channels, Rods,
Flats, Sheets, and strips available in various sizes.
Forged Fittings:
- Stainless Steel: ASTM A182 F304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L etc.
- Carbon Steel: ASTM A105 / A 694F 42 / 46 / 52 / 56 / 60 / 65 / 70 / A 350 LF3 / A350 LF 2, etc.
- Alloy Steel: ASTM A 182 F1 / F5 / F9 / F11 / F22 / F91 etc.
- Others: Monel, Nickel, Inconel, Hastalloy, Copper, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc etc.
- Types: Elbow, Tee, Union, Cross, Coupling, Cap, Bushing, Plug, Swage Nipple, Welding, Boss Hexagon Nipple, Hexagon Nut, Hose, Nipple, Bend, Adapter, Insert, Weldolet, Elbowlet, Sockolet, Thredolet, Nipolet, Letrolet etc.
- Size: 1/8” NB to 4” NB. (Socketweld & Threaded)
Class: 2000#, 3000#, 6000#, 9000# etc.
Flanges:
- Stainless Steel:- ASTM A182 F304 / 304L / 304H / 316 / 316L / 317/ 317L / 321 / 310 / 347 / 904L etc.
- Carbon Steel:- ASTM A105 / A694 F42 / 46 / 52 / 56 / 60 / 65 / 70 / A 350 LF3 / A 350 LF2 , etc.
- Alloy Steel: ASTM A 182 F1 / F5 / F9 / F11 / F22 / F91 etc.
- Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc.
- Types:- Weldneck, Slipon, Blind, Socket Weld, Lap, Joint, Spectacles, Ring Joint, Oriface, Long Weldneck, Deck Flange etc.
- Size:- 1/2” NB TO 24” NB.
- Class:- 150#, 300#, 400#, 600#, 900#, 1500#, & 2500#, Din Stand & Plate Flange BS – 10 Table D, E, F, H, J, K, etc.
Buttweld Fittings:
- Stainless Steel: ASTM A403 F304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L etc.
- Carbon Steel:- ASTM A234 WPB / A420 WPL3 / A420 WPL6 MSS-SP- 75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70
- Alloys Steel:-ASTM A234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91 etc.
- Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc.
- Types:- Elbow, Tee, Reducer, Retuen, Bends, Stub-Ends, Cap, Collar, Cross, Insert etc.
- Size:- 1/4” NB TO 32” NB. (Seamless & Welded)
- Wall Thickness:- Schedule 55 To Schedule XXS.
NICKEL 200
Commercially pure (99.6%) wrought nickel with good mechanical properties and resistance to a range of corrosive media. Good thermal, electrical and magnetostrictive properties. Used for variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalies. Standard products forms are round, flats, pipe, tube, plate, sheet, forging stock, strip and wire.
NICKEL 201
Commercially pure (99.6%) wrought nickel essentially the same as Nickel 200 but with a lower carbon content to prevent embrittlement by integranular carbon temperatures over 600 of (3015oC). Lower carbon content also reduces hardness making Nickel 201 particularly suitable for cold-formed items. Standard product forms are round, flats, pipe, tube, plate, sheet, forging stock, Strip and wire.
MONEL ALLOY 400
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water hydrofluoric, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fitting, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire.
MONEL ALLOY K-500
Corrision-hardenable nickel-copper alloy that combines on resistance of Monel alloy 400 with greater hardness. It also has low permeability and is to under -150°F (-101°C). Used for pump shafts, and value instruments, doctor blades and scrapers, trim, fasteners, and marine propeller shafts. Product forms are round, hexagon, flats, forging tube, plate, sheet, strip and wire.
INCONEL ALLOY 600
A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking corrosion by high-purity water and causing corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip and wire.
INCONEL ALLOY 601
A nickel-chromium alloy with an addition of aluminum for out standing resistance to oxidation and other forms of high temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire.
INCONEL ALLOY 625
A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corosion. Used in chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactor. Standard product froms are round, flats, forging stock, extruded section, pipe, tube, plate, sheet, strip and wire.
INCOLOY ALLOY 825
A nickel-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids to stress corrosion cracking and to localized attack such as pitting arocrevice corrosion. The alloy is especially resistant to sulfuric and phosphoric acids. Used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production and pickling equipment. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire.
INCOLOY ALLOY 800
A nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment heating-element sheathing, and nuclear steam-generator tubing. Standard product forms are round, flats, forging stock, pipe, tube, plate, strip and wire.
INCOLOY ALLOY 800HT
A nickel-iron-chromium alloy having the same basic composition as INCOLOY alloy 800 but with significantly jigher creep-rupture strength. The higher strength results from close control of the carbon, aluminium and titanium contents in conjunction with a higher-temperature anneal. Used in chemical and petrochemical processing in power plants for super heater and reheater tubing in industrial furncaces and for heat-treating equipment, Standard product forms are round, flats, forging stock, pipe, tube, plate, strip and wire.
HASTALLOY C 22
(UNS N06022; W. Nr. 2,4602; NiCr21Mo14W) is a fully austenitic advanced temperatures. This alloy provides exceptional resistance to general corrosion, pitting, crevice corrosion, chemical/petrochemical processing, pollution control (flue gas desulfurization), power, marine, pulp and paper processing, and waste disposal industries. Used in pollution control, chemical processing pulp and paper production and waste treatment standard product forms are round, forging stock, tube, pipe, plate, sheet, strip and wire.
HASTALLOY C-276
A nickel-molyoaenum-chromium alloy with an addition of tungsten having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as welded structures. Used in pollution control, chemical processing pulp and paper production and waste treatment standard product forms are round, forging stock, tube, pipe, plate, sheet, strip and wire.
SMO – 254
Avesta Sheffield 254 SMO is an austenitic stainless steel which due to its high molybdenum content possesses very high resistance to pitting and crevice corrosion. The steel grade was developed by Avesta Sheffield for use in halide-containing environments such as seawater. 254 SMO also shows good resistance to uniform corrosion and, especially in acids containing halides, this steel grade is superior to conventional stainless steels.
254 SMO is registered trademark of Avesta Sheffield AB.
The high levels of molybdenum in particular but also of chromium and nitrogen endow 254 SMO with extremely good resistance to pitting and crevice corrosion. The addition of copper provides improved resistance in certain acids. Furthermore, due to its relatively high nickel content in combination with the high levels of chromium and molybdenum 254 SMO possesses good resistance to stress corrosion cracking.
ALLOY – 904L
904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / crevice corrosion and stress corrosion cracking.
ALLOY – 20
Alloy 20 is one of the so-called “super” stainless steels that was designed for maximum resistance to acid attack. It’s nickel, chromium, molybdenum and copper content contribute to its overall resistance to chlorideon stress corrosion cracking and general pitting attack. The alloy is stabilized with columbium to minimize carbide precipitation during welding. It has good mechanical properties and can be fabricated with comparative ease. Although the alloy was designed for use in sulfuric acid related industries, it finds wide usage throughout the chemical processing industry. It also is used for processing pharmaceuticals, food, gasonline, solvents, plastics, explosives, synthetic fibres and many other products.
STAINLESS STEEL 304
The most popular stainless steel has an economic balance of alloying elements to ensure its good cold formability, corrosion resistance, toughness and good mechanical properties with no excessive work-hardening. It performs well in unpolluted atmosphere but can tarnish or lightly rust in damp atmospheres around some industrial and on/offshore locations. The steel has been used extensively for potable water tubing and in fresh feedwater systems where precautions are taken to avoid crevice attack under deposits, etc. performance in aerated seawater is not good without adequate galvanic or cathodic protection. Stability and toughness at cryogenic temperatures is high.
STAINLESS STEEL 304H
TP 304H with guaranteed carbon content of min. 0,04% which gives a better creep resistance. Similar oxidation resistance to TP 304. Main applications: Heat exchangers, chemical and petrochemical furnaces.
STAINLESS STEEL 304L
Low carbon version of TP 304 guaranteed no creep resistance above 500 C. good high temperature oxidation resistance up to 900°C. General corrosion characteristics are similar to TP 304. Stability and toughness at cryogenic temperatures is high. Main applications: Pipe and heat exchanger tubes in chemical, petrochemical and food industries.
STAINLESS STEEL 316
This is one of the family of 17% CR 12-13% Ni steels containing Mo of 2,0-2,4% stabilized with Ti which minimizes chromium carbide precipitation and improves resistance to intergranular corrosion. In the damp industrial or coastal atmospheres of Europe, they.
STAINLESS STEEL 316L
These grades belong to the family of 17% Cr 12-13% Ni steels containing 2,0.3,0%Mo. This standard grade is used where specific attributes of other members of the family are not necessary – eg. no likehood of intercrystalline corrosion caused by wedding. Special for TP 316L, low carbon content, minimizes chromium carbide precipitation and improves resistance to intercrystalline corrosion. After TP 304/304L type steels, these TP 316/316/L grades are the most widely used austenitics. Good high temperature oxidation resistance upto 900°C. In the damp industrial or onshore atmospheres of Europe, they perform better than TP 304/304L and ferritic grades. In low temperature seawater they offer limited resistance to pitting but are susceptible to crevice attack. Their short and long time properties at elevated temperatures are also superior to those of comparable TP 304/304L grades. Main application: Pipe and heat exchanger tubes in chemical and petrochemical plant, in boilers and food industry.
STAINLESS STEEL 316H
This grade with guaranteed carbon content of min. 0,04% enhances strength at elevated temperatures. Similar oxidation resistance to TP 316. Main applications: heat exchangers, furnaces, chemical and petrochemical plant.
STAINLESS STEEL 321
High carbon steel prone more to intercrystalline attack in weld zones and slower cooling sections. These steel avoids such attacks through its stabilization with Ti. The corrosion behavior of this alloy in natural environments is very similar to the TP 304/304L alloys. Architecturally, it may not be adequate for near-industrial or onshore locations in Europe. Satisfactory in many low-chloride water, it is prone to pitting or crevice corrosion in seawater. Water treatment, galvanic protection and deaeration can influence the performance.
STAINLESS STEEL 321 H
This is the high carbon version of TP 321 which ensures great creep resistance. Behaves much the same as TP 321 in oxidation resistance. Main applications: heat exchangers, furnaces, boilers in chemical and petrochemical plant.
UNS S31803
A widely used duplex steel combining high strength and corrosion resistance in various organic acids, unorganic acids, aggressive coolingwaters and hydrous H2S/NaCl mixtures. With a near equal mix of austenite and ferrite, they give yield strength 30% higher and tensile strengths marginally higher than comparable nitrogen-containing austenitics. High resistance to general corrosion and specifically to pitting and crevice corrosion. Their resistance to stress-corrosion cracking in neutral chlorides is superior to that of the austenities. In high chloride acidic or moderately sour environments where hydrogen or sulphide stress cracking is more likely, higher alloyed austenitics need also to be considered. Impact values are high and transition temperatures of base materials vary around 50°C. However, the proportion and orientation of ferrite in welds and base materials may significantly affect toughness at subzero temperatures. Exposures to moderate and high temperatures and less rapid cooling may cause embrittlement.
UNS S32760
UNS S32760 (TSD2507) is a super ferritic-austenitic grade with high mechanical properties and superior corrosion resistance. Besides the ferritic-austemitic structure, TSD2507 has an excellent resistance to pitting and crevice corrosion and is therefore particularly suitable for sea water applications and for process systems on offshore platforms, respectively in all situations where there is a risk of stress corrosion. The high tensile properties are twice comparing with TP 316 L stainless steel. The service range is between -50°C up to +275°C. More detailed informations about this particular grade are described in our TDS 2507 data sheet.
QUALITY CONTROL:
RAW MATERIAL TESTING:
All the material used for manufacturing of fittings and other fabrication jobs are tested for chemical & mechanical properties. The results are confirmed to meet original material requirement before processing. We are using measuring equipments calibrated by Govt. approved calibration agencies.
DIMENSIONAL INSPECTION :
All type of flanges and fitting are checked for dimensional accuracy from raw material stage to in process & final product delivery by using calibrated measuring instruments.
MATERIAL TRACEABILITY:
All the material used for manufacturing of fitting, valves and other fabrication jobs are identified & fully traceable from raw material stage to final product.
HYDRO TEST UP TO I 5000 PSI:
All type of fitting are tested at a specified static pressure for a predetermined period for no leakage.
QUALITY POLICY:
SUPER METAL MANUFACTURING continually improves the effectiveness of the quality management system (QMS) and sets quality objectives and work plans. Moreover, SUPER METAL MANUFACTURING is committed to upgrade the capabilities of its technical and administrative staff through formal training and continuous technical quality awareness.
We have achieved the high quality through the professional competence of the personnel, high working motivation and a service minded attitude. Every single employee of SUPER METAL MANUFACTURING is responsible for the quality of his/her work.
All SUPER METAL MANUFACTURING products are tested in accordance to internationally recognized standards or our own more stringent internal test procedures, which is developed considering the harsh field conditions. In addition to this we also offer specific testing to our client’s requirement.
We are registered with many renowned govt. & public sector companies including BARC, NPC. We can provide test certificates from govt. approved laboratory or manufacturers T.C. we also agree with third party inspection of Goods With Lab Entities Such As: M/s. UHDE, EIL, LLOYDS, TATA, PDIL, HGC, SIMON, CARVES, DAVY POWERGAS, ICB, INTENG, BAXCOUNSEL, BUREAU VERITAS.
INNOVATION
http://www.tg-manufacturing.com/ ( COPIED FROM THIS SIDE )
Super Metal Manufacturing Co. is a Indian-based metal products manufacturing company focused on utilizing modern technology, advanced manufacturing design, and a skilled group of trained associates to offer world-class metal products to a variety of industries around the globe.
Our dedication to “manufacturing the future” is what keeps us ahead in innovation, service, and our ability to provide quality metal parts to our customers. Contact us today for a free quote!
Super Metal Manufacturing Co. continuously strives to be the most diverse process-capable, metal products manufacturing company, not only in India, but throughout the entire metal products manufacturing industry.
Our clients have come to expect the kind of one-on-one service they would normally receive from smaller metal part suppliers, while knowing that they can count on our diverse array of metalworking capabilities and skilled staff to handle any job, of any size or complexity.
In short, our clients come to us for our wide range of metal ferrous & non-ferrous capabilities, and they stay with us because of our individualized service & innovation through every step of their metal product’s manufacturing cycle.
XBY Iron & Steel Trading Co.,Ltd was founded in
2000. With the endeavor of more than RMB¥ 9
Million sales amount and 1.2 million metric tons
steel sales quantity annually.
Copper pull basin faucet cold and hot mix water bath basin faucet
Jijin Copper hot and cold basin faucet Double Spouts: Pull-out sprayer provides powerful spray or aerated stream. Filtering spout offers purified drinking water. Convenient & Efficient: Swivel design provides water at easy access. Pull-out sprayer can reach every corner for any task. Easy Operation: Double handles ensures separate, precise control over the water flow of the 2 spouts, simple in use and look.
– Please note that this Copper hot and cold basin faucet wholesale does not come with filter system.
– Constructed from solid brass for durability and reliability.
– Finished in a high quality, corrosion resistant polished chrome.
– hot and cold mixed water list kitchen faucet Features a 360-degree swivel pre-rinse spout design.
– Separate water way for filtered water.
– Includes a stainless steel pullout hose that can be extended to 23.6″ (600mm).
– Not suitable for low pressure. Minimum required water pressure is 0.05 MPa (0.5 bar).
– All mounting hardware and hot/cold waterlines are included.
Cori s.r.l. is a company founded from the twenty years experience in the special steel trading business. It’s an international trading company that operates in the Russian, African and Chinese market.
Over the years it has managed to establish a relationship of complete trust and collaboration with some of the biggest Chinese companies.
Its structure has developed a deep experience within import-export business both commercial and legal.
It operates in the special steels business, working in collaboration with one of the largest group producer of special steels; it’s present in the Solar and Renewable Energy area, holding the exclusivity for the Italian market of the Chinese company Everexceed. It offers consulting in the design and development of photovoltaic systems of different sizes, and is able to maximize the investment with the support of national and foreign investment funds.
PanFeng Technology Co., Ltd, locating in hinterland of ChangJiang delta, is a high tech enterprise of JiangSu province, which is a medium-sized corporation that specialized in producing general machinery in China. It will only take approximately 1 hour by car to ShangHai, Suzhou or NanJing.
We engage in science and technology as a priority, holding a plenty of human resource with high-tech, 80% of our staff are specialized people in this industry. With world-advanced level, we researched and produced whole-continuous-complex-pipe production line, high frequency solder for carbon-steel and stainless steel arc-argon solder in serious configuration, through which the pipe can be molded in one time. We mostly produce complex-pipe (Stainless steel clad pipe) with different specialization and in different thickness.
Our stainless steel complex-pipe will be provided with good appearance, high intention, high anti-pressure, high anti-grinding, excellent anti corrosion, and lower price comparing with those kinds of pipes with same specialization. It can be used in very extensive scopes, which means: “From the big realm to the detailed field”, for example, in civil public construction: Guardrail, Isolated area, Signboard, Street lamp pole, for sewage disposal factory construction and road-kiosk, our products is preferred. Also in decoration and advertising, for presentation board, call-board, advertising-board, information-bulletin, our products are good choice. In recent year, in furniture prospect, anti-stolen windows and door, handrail for inner decoration already be adopted of mental pipes.
Deploitation with courage, and attempt with intrepidity are of our principles we persisted. Lately, those new market, for example, components renewal for textile machinery, handlebar of motorcycle and bicycle, ironware for sanitary ware, leisure ware, vent-pipe for auto, muffler, hotel ware and medical treatment, have holden out the invitational arm for us. As a view for the future, the people from PanFeng with aggressive intention should be successful in the market. Also our products have covered almost exceeding half of China Market.
We have advanced producing process, rich technique power. No matter what producing or installation, we have strong technique strength. Also we can produce with materials supplied by clients or produce different thickness steel pipe according to customers’ demand.
Our business are involved in whole-continuous-complex-pipe production line, solder pipe Unit, high frequency solder pipe equipment, stainless steel solder pipe equipment, assistant equipment for solder producing line and rectangle pipe producing equipment, also including siphon machine with digital control, automatic mental fretsaw machine, siphon machine, pipe-cut machine, stainless steel complex pipe producing and selling, further processing is also involved.
Donets’kyi metalurhiinyi zavod PAT (Donetsk Metallurgical Plant JSC) is a Ukraine (DPR)-based company active within the steel industry. It is principally involved in the manufacture of metal castings, pig iron and of over a 100 varieties of steel – carbon steel, constructional steel, tool steel and alloy steel, among others. The Company is also involved in the production of steel church bells from color high quality alloys, of steel electro-welded pipes and metal furniture skeletons and of ferriferous, slag and limy products. It consists of three divisions: blast furnace, open hearth furnace and rolling. It sells its products on the domestic market, as well as exports them to the Russian Federation, Belarus, Azerbaijan, Estonia, Lithuania, Asia, the Near East, Western and Eastern Europe, Africa and both Americas.
Alloy Steel International, Inc. (Alloy Steel) is a manufacturer of Arcoplate. The Company is a provider of anti-wear and hang-up solutions to the mining and bulk materials industries, based in Perth, Western Australia. Arcoplate is accepted in the mining and mineral processing industries to protect a host of fixed plant and mobile equipment applications. The Company services the market place from its Australian manufacturing facilities.
Established in the year 2000, we Aakaf Steel Private Limited are professionally managed company engrossed in Trading, supplying and marketing of quality Iron and Steel Products. Aakaf Steel Private Limited Managed and promoted by young and dynamic professionals and having a total approach towards marketing we deliver highest quality Iron and Steel products at best competitive rate.
Aakaf Steel Private Limited Mainly engaged in Marketing, Trading, Supplying Iron and Steel Plates Sheets, Beam, Channel, Angel Chequared Plate CTD Bars, Round Bars, Square bars, Section –T etc.
Products Supplied By Aakaf Steel Private Limited Is manufactured by reputed manufactures like Steel Authority of India Ltd., Shah Alloys Ltd. , Essar Steel Ltd., JSW Steel Ltd., Jindal Steel & Power Ltd. And more who are the global leader in Iron and Steel Industries.
Hangzhou FAMOUS Steel Engineering Co.,Ltd. focus on various structural steel construction and steel-related products supplying. Under support of structural giant Hongfeng Industrial Group, FAMOUS received a lot of foreign projects from project engineering, fabrication, logistic and installation guidance etc. and become more professional in foreign project operation, specially in US-EU standard engineering and project management aspects. HONGFENG Industrial Group is a comprehensive group company dominated by steel structure fabrication and installation. The group owns several subsidiaries namely Fuyang honfeng Building Installation Co., Ltd., Fuyang honfeng Building Materials Co., Ltd., Zhejiang Weifang Electro-Optical Technology Co., Ltd., Zhejiang Hongjian Testing Technology Co., Ltd., Fuyang City Jinming Logistics Co., Ltd., Fuyang hongfeng Building Labor Co., Ltd., and Fuyang Fuyang honfeng Nonferrous Metal Co., Ltd., etc. Hongfeng Industry Group is an extra grade enterprise of China’s steel structure manufacturing, has the Grade I professional contracting qualifications in terms of steel structure, Grade B special design of steel structure, GradeⅡqualifications in terms of general contracting of house building and Grade Ⅲ professional contracting qualifications in terms of groundwork, foundation work and the mental window and door engineering. The company covers an area of 360,000 sq.m. with registered capital of 100 million Yuan and the total assets of 970 million Yuan. It owns advanced professional production equipment for the all automation production line of H type that is most advanced at home, pipe truss structure, boxbeam production lines, CNC hydraulic punching posterior cutting C type steel, Z type steel production lines, vertical seam 360-degree whipstitch roof board of hidden button type, weather board production lines and metal sandwich panel production lines, etc.
Currently the group has over 1,200 employees of whom 206 are engineering technicians of all level and all kinds and over 60 are state Grade I, GradeⅡregistered structure engineers, builders and architects. In succession, the company has passed the certification of the quality management system(ISO 9001:2008), environment safety management system(ISO 14001:2004), occupational health and management system(OHSMS) (GB/T28001-2001) and HSE management system(SY/T6276-1997), measurement testing system as well as the standardized good practice verification and steel structure testing center CMA measurement certification. In recent years, the company has ranked among powerful ones in the same industries at home and the users cover over twenty two provinces, cities at home and many countries due to sophisticated talents, excellent management and quality. Currently, the company has walked on the multi-development road of the products including boxbeam, pipe truss structure, net rack, heavy steel, light steel, high-rise buildings, steel structure materials, nonferrous metal and electro-optical technology products and has set up marketing and service network across Xi’an, Shanghai, Nanjing, Guangzhou, Wuhan, Xiangfan, Liuzhou, Wuhu, Suzhou, Zhengzhou and Yunnan, etc., as well as exporting business with Germany, France, Bolivia, Chile, Thailend, Nigeria, Iran, Angola etc.
Imperial Trading Corporation is a Canadian corporation with head office in Richmond Hill, Ontario, Canada and stocking distribution facilities in major Steel Producing Areas of the United States and China.
It is principally engaged in processing of steel products. The company’s major products are medium plate (coiler) mill products. It has a complete long process product system from coking, sintering, iron making, steel to steel rolling. With an annual output of 5.5 million tons of steel, iron, 6 million tons, timber production capacity 4.5 million tons. Plate volume and the board have been the company’s leading product, its production in 2007, the country ranked second. Domestic market share of 5.46%, of…
Hebei Besince Wire Mesh Manufacturer Co., Ltd is one of the professional manufacturers and exporters in Hebei, China. Our main products including four kinds of series, as Wire series, metal products series, nonmetal series and processed series.
Wire Series including stainless steel wire, black annealed wire, Galvanized wire, Barbed wire, Razor wire and Nickel wire. And it also includes wire nails, looped tie wire, U type wire and bailing wire, etc.
Metal products including stainless steel wire mesh (wire cloth), welded wire mesh, hexagonal wire netting, window screen, expanded wire mesh, Conveyor belt, Knitted mesh, steel grating, punched wire mesh, crimped wire mesh, Vibrating mesh, Chain link fence, wire mesh fence, etc
Nonmetal mesh mainly includes Construction safety mesh, fiberglass mesh, plastic mesh, polyester mesh, filter paper, etc.
Processed series include wire basket, wire rack, panels, sintered mesh, filters elements, etc.
For more information about us, please feel free to contact us. We will show you the details of what you want to know.
Because of high quality, competitive prices and prompt delivery, our goods are not only selling well in China, but also exported to clients in Europe, the USA, Mexico, Brazil, Australia, the Middle East, Africa, South America and other countries and regions.
You are welcome to send an email or fax your inquiries and trial orders to us. We assure your inquiries can get replies within one hour (in China work time) by our professional staffs.
Principally engaged in the design, manufacture and sale of specialised seamless pipes for the oil and natural gas industry, including oil well pipes (oil transfer pipes and casing pipes) and petrochemical pipes, as well as other specialised seamless pipes for vessels, boilers and other purposes.
Xuzhou Zhongmei Hitech International Engineering Co.,Ltd is a large professional steel structure and steel grid structure company which engage in consultation, design, construction, supervision and service for light steel structure, heavy steel structure, steel grid and equipment non-standard parts. Among total 1026 staffs there’re 398 technicians with professional title and economic managers,50 national registered Chartered Builder, 6 national level-one Registered architects, and more than 20 senior engineers. XuZhou ZhongMei has 3 manufacturing bases in China: (XuZhou ZhongMei Light-steel Construction New Technique Co., Ltd, XuZhou Besta Heavy-steel Structure Co.,Ltd, NingXia Light-steel Structure Corporation). And we have a total capacity of 100,000 tons steel structure and 60,000 tons grid.
Enterprise qualification ratings:
Qualification of Class A National Construction
Qualification of Grade A Specific Program Design
Qualification of Grade A Coal Supervision
Post doctorate Scientific Research Center.
We’ve built international advanced standard research center in China. Our light-steel construction products award “Certificate of National Kion to investment of technique and received title of High-tech Entey New Product” by the State Scientific and Technological Commission and “Applied and Promotive Certificate of New-tech and New Product”. Our scientific research project“Applied technique for light-steel construction”awarded “Certificate of the State Scientific Result” by the State Scientific and Technological Commission, the first, second and the third completion person are all at principal position of our company. In Oct 2006, we set up post doctoral scientific research workstation which authorized by the State Ministry of Personnel.
The company has passed the HSE comprehensive authentication (health and safety, environment, quality), and set up perfect management system of quality, environmental and occupational health and safety. We have eight international advanced automatic light steel manufacturing lines, four heavy steel structure manufacturing lines, and two Secondary CNC finishing the production lines, two non-standard manufacturing lines, eight color steel sheet pressed manufacturing lines and sixteen steel grid automatic manufacturing lines.
1. Light steel construction series 2. Steel space grid construction series
3. heavy steel construction series 4. Equipment non-standard parts
Among, the large span store material dome, big span conveying trestle, single and multi-layer and high-rise steel structure building system framework is extremely unique products.
Spherical dome shed for stockpile of our company is applied to many industries, such as cement, coal, power plant and chemical engineering etc., of which production per year is 200 thousand㎡. Shed for 200 thousand tons coal stockpile of HuoLinhe with diameter 133m and height 70m gained the big award of China construction steel structure gold medal in 2007, and CCTV-1 news broadcast reported the project which is also the biggest dome shed for stockpile in Asia. Until now, more than 100 sheds for stockpile of our company are under construction or have been completed in china; the largest span 138 meters and also several other sheds for stockpile are under construction in abroad, such as: India, Colombia, Turkey, Pakistan, the Philippines.
Our production of conveying belt trestle(maximum span 80m and maximum height 65m) per year is 5km and our productive force for it is 15-20km. There are three kinds of conveying belt trestle, whole sealing truss trestle, and another one is semi-closed belt trestle.
Single and multiple frame steel structure system is mainly used in coal preparation plant, cement plant, power plant, metallurgy, chemical industry, civil building industry.Our company especial
Tewoo International Trade Co., LTD.
As affiliate of TEWOO Group Co., Ltd., TEWOO International Trade Co., Ltd. was founded in April of 2011. TEWOO International Trade Co., Ltd. is a professional international trade company with the registered capital of 0.6 billion RMB. The company engaged in, such as, steel, non-ferrous metals, iron ore, coking coal, fuel oil and palm oil, soybean and other kinds of production sources and subsistence products.
A. Structure
TEWOO is a corporate governance company, consisting of the board of directors, supervisory board, and the management team. Its headquarters contain Steel department 1, Steel department 2, Steel department 3,Raw material department 1, Raw material department 2, Operational department, Financial department and General office. Overseas network cover Hong Kong, the United States, Vietnam, Korea and Europe. There are 70 employees in our company with an average age of 28, 90% of which have bachelor’s degree and cet-6 certificate.
B. Marketing network
Facing new competition and opportunities in the future market, the company relies on sincere business and effective services as well as seeking wider and deeper cooperation with the customers from all over the world.
a. Steel Exporting Business
In the channels of steel resources, TEWOO has already consolidated long-term strategic relationships with top mills such as: Baotou Steel, Benxi Steel, Wisco, Shougang Steel, Hebei Iron & Steel Group, Shagang Steel, Tiangang Steel, Rigang Steel and Linggang Steel, etc.
In the channels of sales network, TEWOO has already consolidated long-term strategic relationships with Thyssen, Salzgitter, Tata and DAEWOO. The selling areas cover Korea, Japan, Thailand, Vietnam and Taiwan; Pakistan, the United Arab Emirates, Israel, Burma in the Middle East; the United States, Brazil, Chile in America; Belgium and Germany in Europe, etc.
Now products include: hot-rolled, cold-rolled, hot dipped galvanized, section steel, steel plate and wire rod,etc.
b. Raw materials Business
The selling areas cover Yangtze River and the regions of East China. We keep expanding our domestic market share and building firm strategic partnerships with a great number of steel mills and coking plants in Tianjin, Hebei Province and Shandong Province.
Our raw material business covers coking coal, PCI coal, iron ore, pig iron, hot briquetted iron, copper concentrate, etc.
c. Agricultural Products Business
Main business: the procurement, sales and other trade of soybean, rapeseed oil, palm oil.
d. Nonferrous Metal Business
The company mainly engaged in copper, nickel and other nonferrous metals import business. The organization is committed to provide high quality raw materials for the domestic nonferrous metal processing enterprises.
e. Petrochemical Products
The company mainly engaged in bio diesel, fuel oil,aromatics and other petrochemical products business.