LANDYOUNG GRP cable tray is a composite material profile made of E-glassfiber, polyester resin or vinyl resin or epoxy resin or phenolic resin, flame retardant by pultrusion process or SMC process.
DESCRIPTIONS
LANDYOUNG GRP cable tray is a composite material profile made of E-glassfiber, polyester resin or vinyl resin or epoxy resin or phenolic resin, flame retardant by pultrusion process or SMC process.
Application
Due to the low thermal conductivity of the selected materials and the addition of flame retardants, the product not only has fire resistance, heat insulation, self-extinguishing properties, but also high corrosion resistance, but also has light structure, aging resistance, safety and reliability. And other advantages, it can be conveniently used in conjunction with metal bridge frames and used in strong corrosive environments such as chemical industry, metallurgy, and petroleum.
Advantages and features
- GRP cable tray is suitable for the laying of power cables with voltages below 10 kV, as well as control cables, lighting wiring, pneumatic and hydraulic pipe cables, and other indoor and outdoor overhead cable trenches and tunnels.
- FRP cable tray has the characteristics of wide application, high strength, light weight, reasonable structure, low cost, long life, strong corrosion resistance, simple construction, flexible wiring, standard installation, and beautiful appearance. Expansion cables, maintenance and repair are all convenient. The installation FRP cable tray can be adapted to local conditions.
- FRP cable tray can be installed overhead with process pipelines; slabs and beams are hoisted; indoor and outdoor walls, column walls, tunnels, and cable trench walls are side-mounted, and can also be installed on open-air columns or piers. When hoisting large multi-layer bridges, I-steel columns should be laid symmetrically on both sides as far as possible. FRP cable tray can be laid horizontally and vertically, and can be cornered, T-shaped, and cross-shaped branches; adjustable width, height, and diameter.
Specifications and types
FRP Ladder cable tray
Ladder Cable Tray systems consists of two longitudinal side members connected by individual transverse members, and is designed for use as a power cable or control cable support system
FRP cable trunking
It is a full-closed cable trays, which is applied to the laying of cables, telecommunications cables, thermocouple cables and other highly sensitive system of control cables.
FRP tray type cable tray
It is a structure consisting of bottom (ventilated or solid) with the longitudinal siderails.
If you are interested in our products, please visit our website
Fujian Dongya Machinery Co., Ltd. was founded in 1988 in China West Strait Economic Zone, Putian, Fujian, China. It covers an area of 127,050㎡, with capital assets of 430 million RMB and registered capital of 116 million RMB. It has 1,120 employees, including 130 experienced engineers and management staff with senior professional titles.
For over 30 years, DY piston rings produced by Fujian Dongya Machinery Co.Ltd., provide companies such as Dachangjiang Group, Zongshen Power, Longcin General Motors, Lifan Technology, Qianjiang Motorcycle, Honda Power, Sundiro Honda, CFmoto Power, QS Suzuki, Briggs & Stratton, STIHL,etc. for motorcycles, general-purpose engine, drones, and outboard engine manufacturers general support.
Piston ring products are widely exported to all over the world such as Europe, USA, Middle East, South America, Africa, and Southeast Asia, with good global reputation for its high quality and market share.
Union Steel Industry Co., Ltd as member of United Steel Industry Group, specialized in steel pipe and pipe fittings designing, manufacturing, stocking and exporting in China.
Our products
- SMLS &ERW Steel Pipe（especially processing galvanized/FPE/3LPE/Grooved/pipe & flange welding …etc with very competitive price)
- Tubing&casing (Professional standard API 5CT PSL1/2 J55 K55 P110 Q125….)
- Structure steel profile（Mainly provide international general standards, advantage prices for some EU standards or other standards)
- steel plate &pipe fittings(flange,elbow,reducer,valve..etc)
We basically have steel in stock and support fast delivery:
- Steel pipe : ASTM A53;ASTM A106;ASTM A333;ASTM A500;ASTM A252 ..etc or Equivalent
- Structural steel hollow section: EN 10025、EN 10219 S235/S275/S355..etc or Equivalent
- Steel plate : ASTM A36, ASTM A283, ASTM A572..etc or Equivalent
- We can also provide various conventional stainless steel products.
You can forward needs on alisa@union-steels.com i will provide you best price .
As one of the leading manufacturers of Seamless Butt Weld Fittings, EBY Fasteners is committed to providing customers with high-quality products that meet the required industry standards in terms of durability and quality. Seamless Butt Weld Fittings are manufactured from seamless pipe and tube using either a hot or a cold-forming process, depending on the application. Buttweld Seamless fittings continuously formed from a section of seamless pipe material, seamless fittings are formed by applying pressure and heat to change the pipe directly into a different shape, or at least into an elbow shape.
If you are lookimg for Super Duplex Fasteners suppliers so here Explore Middle East FZE company provide you the best quality of Super duplex fasteners. These fasteners contain higher amounts of chromium, molybdenum, nitrogen and tungsten, giving them excellent corrosion resistance properties. Hence Super Duplex Fasteners are suited to deepwater offshore oil production. Promoters have experience of more than 20 years dealing with Exporters, Manufacturers and Suppliers of industrial Metals. For more information visit our site!
Changsong industrial equipment (Shandong) Co., Ltd. is an innovative and technological & international industrial solution company, established by the management team of Shandong University MBA graduates. Based on experience and international cooperation with SIEMENS-VAI (Primetals), Xstrata, Glencore, SMS, DME, Koniambo, Metso, Vale, SDEPCI, SDM, WESCO, Hiab and other world-renowned companies, through integration of well-known industrial products and spare parts supply channels of headquarters, our business ranges from supplying Complete sets of metallurgical equipment and spare parts,Bisalloy Shangang, fireproofing of shangang, transportation equipment and facilities. Include steel, casting, forging and other metal materials to supplying high-end mechanical and electrical equipment, and instruments.
We have thousands of sub-vendors for the business of joint manufacturing, we also work as agent of many world-renowned brands, we have broad overseas channels accumulated over the years, working together with our strategic partners to provide lean supply chain services, focusing on high-quality customers, to solve the customer’s urgent, special, small orders. JGPI also help all types of enterprises to develop overseas markets, provide commercial and technological consulting services for domestic and foreign enterprises supporting by various industry associations, research institutions, and teams of expert.
Serving your needs of industry
Meeting your demands of advanced instruments
Providing quality and economic hydraulic parts
Service
- Project routine procurement
- Project supplementary procurement
- Production material procurement
- Spare parts procurement
- Collected manufacturing of equipment
- Repair of equipment
- International marketing
- International consultancy of technology and commerce
- Integrated cooperation of project
We focus on the introduction of advanced products and technology to China, the introduction of creative products and enterprises to overseas markets. We integrate industry and expert resources to provide services in fields of energy, environmental protection, metallurgy, chemical, medical, research and other industries. Our corporate culture:
Customer Value Oriented
Customer Trust as the Goal
Quality and Safety as the Gene
We insist on continuous improvement, prevention, access to the trust of suppliers and customers to jointly ensure the smooth progress of the project, to make the world better through our joint efforts.
Are you looking for scaffolding products or manufacturers？EK scaffolding is the scaffolding manufacturer and supplier in China. We can provide you all types of scaffolding products, such as scaffolding couplers, scaffolding system, cuplock scaffolding, ringlock scaffolding, base jack, etc.
Hebei Deko Commercial Co., Ltd. (hereinafter referred to as the “DEKO”), the company is located in China’s “Land of Casting” Hebei province, DEKO mainly supplies products involved in municipal engineering and road construction and related products, such as Ductile iron Pipe, Pipe Fitting, Valve, Manhole covers, Gratings, Public Illumination, Urban Furnishing, Flange and Pipe Repair Clamp etc…. we can also produce according to the drawings and samples provided by customers, our products have been exported to Europe, Africa, Asia, Middle East and Southeast Asia etc… providing import and export business for domestic and foreign customers.
DEKO has its own fully automatic vertical production line and now we have reached a strategic cooperation with several manufacturers and become the only designated agent service by manufacturers and can be better provide customers with the best prices, excellent product quality, DEKO’s aim is: to supply the required products and high quality service for every customers and maintain long-term and stable cooperation.
IBC GROUP is dedicated to transforming various metal materials all over the world, through the process of coils, steel sheet, steel pipe, wire, profile,Alloy steel, all variety of metal products to the construction and wide manufacture industry. Meanwhile, because maintain long term friendly business relationship with clients. Enjoy solid trust from our regular clients, already working one-stopstation service in other construction related products Such as metal process equipment .All Enjoy highly comments from our customers.Look forward the chance to develop together.
IBC GROUP- Focus on Value transfer,Outstanding Products and Technologies.
The head office of IBC Group is located in Tianjin, China. Since 2009 we focus on ONE-STOP Metal service, professionally engaged in Carbon steel,Stainless steel,Special Alloy steel,non ferrous metal, construction material and Metal processing Equipment. we keep long-term strategic cooperation with TOP Resources.
Our products widely cover as below
Cold-rolled High Strength Automotive steel,Galvanized & Galvalume steel coil and sheet,Aluminized steel,ZAM Zn-Al-Mg coated steel,PPGI PPGL. Pickled oiled steel.
Roofing sheet,Embossed door skin sheet.Perforated Metal Sheet.Wear resistant plate.
Steel pipe,insulated steel pipe,pipe fittings, Pipe spool and pipe fabrication.
Steel wire,tempered and quenched alloy bar.Steel structure profiles such as Bar and Beam,Purlin.Copper,Titanium.
Our products are widely used in construction, automobile, household appliances, petroleum and natural gas chemical industry, aerospace, coal mining, power plant transportation, agricultural breeding and other fields.we always keep the marketing philosophy “Be honest, trustworthy and mutually beneficial”. enjoyed high comments from clients.
Ashtavinayaka Overseas are manufacturers, suppliers and exporters of high quality stainless steel sheets, stainless steel hot rolled sheet, stainless steel 316 coil, stainless steel polished sheet, stainless steel plate, stainless steel shim sheet, stainless steel coil, stainless steel round bar, stainless steel pipe, stainless steel 304 coil, stainless steel seamless pipe, stainless steel 304 sheet, stainless steel welded pipe, stainless steel 316 sheet, stainless steel erw pipes and tubes, stainless steel 304 plate, in Mumbai, stainless steel 316 plate India.
Our Stainless Steel Products
Stainless Steel Plate
Stainless Steel Sheet
Stainless Steel Coil
Stainless Steel Pipe
Stainless Steel Seamless Pipe
Stainless Steel Welded Pipe
Stainless Steel ERW Pipe
Stainless Steel Round Bar
Stainless Steel Rod
Our High Nickel Alloy Products
High Nickel Alloy Plate
High Nickel Alloy Sheet
High Nickel Alloy Coil
High Nickel Alloy Pipe
High Nickel Alloy Tube
High Nickel Alloy Round Bar
High Nickel Alloy Rod
Know More http://www.ashtavinayakaoverseas.in
Who We Are
Ares Engineering is the expert in the manufacturing metal decorative wire mesh for architectural application. With the most advanced facility, we have the most modern and productive mill in China. Our products―whether they’re expanded metal mesh, laser cut sheet, perforated sheet or stainless steel decorative wire mesh―seamlessly blend form and function, challenging the status-quo. Through consistent growth and innovation we strive for the highest quality products at an unbeatable value.
As a major manufacturer and supplier of metal mesh products, we are committed to quality. Our investment in personnel and equipment provides you–customers with innovative and value-based products that meet or exceed your design expectations. From concept to completion, our team of experts and 35 years of experience in metal products can help you choose the mesh that suits your needs.
Our People
At Ares engineering, we are extremely proud of our employees and our commitment to them. Everyone is full of enthusiasm, diligence, dedication, and always strive to pursue the highest quality craftsmanship. They are the heart of our company and the reason why we are able to provide you with high-quality metal mesh products.
We have professional sales staff, engineers, designer, mesh worker, painting technical worker, quality inspector, customer service representatives, and all of the creative, inventive individuals here at Ares that continue to push the boundaries of what metal mesh can be.
With a professional team of product advisors, we are able to guide you in product selection. If your product requires design and technical support, we can provide suitable suggestions, alternatively we can provide price information, availability and lead times.
Company Profile
Ares engineering has been the leading manufacturer of metal mesh products. We are well respected in the industry for being trustworthy in quality and service.
Ares was built as DBL Expanded Metal Mesh Factory in 1986, which only produce the expanded metal mesh at first. With time goes by, our founder introduced many advanced equipment and enlarge our production range, including not only stretched mesh machines, but also punching machines, laser cutting machines, cutting machines, and decorative wire mesh machines. Then we renamed the company name as Anping County Huijin Wire Mesh Co., Ltd on 2008. Next year, we started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology.
With the continuous increase of decorative mesh projects, we invested the international-standard PVDF and Powder Coating Painting line, which can control quality well.
On 2019, we set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. The main purpose of the branch establishment is separating projects from traditional businesses, assembling a dedicated project team which can provide solutions and professional service for metal decorative mesh projects.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
History
1986: Built DBL Expanded Metal Mesh Factory
2008: Renamed as Anping County Huijin Wire Mesh Co., Ltd
2009: Started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology
2012: Invested the international-standard PVDF and Powder Coating Painting line
2019 by now: Set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. Focus on providing solutions and supplying products for metal decorative mesh projects.
Our website:http://www.aresmaterial.com
1958-1990 Hebei XINYU Welding Co., Ltd.
1991-2004 DONGGANG Welding Materials Co.,Ltd, which was founded by Hebei University of Technology and Hongkong Community Service Center,mainly produces High antirust CO2 gas-shield welding wire, Submerged arc welding wire, Stainless steel welding wire & Flux-cored welding wire.
- Now Hebei XINYU Welding Co., Ltd, which mainly produces high strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire . Our products are widely applied to the welding of low-alloy high tensile large & key steel structures in coal machinery, construction machinery, petrochemical machinery, pressure vessels or tanks, oil & gas pipelines, military industry, shipbuilding, bridge and high-rise buildings etc. At the same time,we are the only interprise in the domestic which produces welding wire as well as welding wire equipment.
All our products have passed ISO 9001-2015 quality system certification and CE certification because of our advanced production lines, top professional testing equipment, intelligent R&D team and scientific management system. Meanwhile, we get 7 invention patents including a national one. We are a member of China Mechanical Engineering Association and China Welding Association. Other honors are ” Consumer Trusting Products in Hebei province” ” Famous Brand products in Hebei province” ” Good Credit Enterprise in Hebei Province” and “China Key &Leading Enterprise in high tensile steel welding wire”.
Our Welding wires and welding wire equipment are exported to USA, Italy, Brazil, Russia and India etc.
Welcome you to our factory any time.
Radisson Impex are one of the leading manufacturers, suppliers, exporters of high quality stainless steel flanges, high nickel alloy flanges, inconel flanges suppliers, monel, hastelloy, alloy 20, monel 400 flanges suppliers, titanium alloy, copper nickel flanges, nickel 200 flanges manufacturer, duplex and super duplex steel, hastelloy c276 flanges manufacturers, alloy steel, inconel 600 flanges manufacturer, carbon steel flanges in Mumbai, India. Flanges Manufacturers in India, Flanges Supplier in India
Our Products
Nickel 200 Flanges
Inconel 600 Flanges
Inconel 625 Flanges
Incoloy 800 Flanges
Incoloy 825 Flanges
Hastelloy C276 Flanges
Hastelloy C222 Flanges
Monel 400 Flanges
Titanium Gr2 Flanges
Titanium Gr5 Flanges
Alloy 20 Flanges
SMO 254 Flanges
Stainless Steel 304 Flanges
Stainless Steel 304L Flanges
Stainless Steel 316 Flanges
Stainless Steel 316L Flanges
Stainless Steel 310 Flanges
Stainless Steel 321 Flanges
Stainless Steel 904L Flanges
Alloy Steel Flanges
Alloy Steel F1 Flanges
Alloy Steel F5 Flanges
Alloy Steel F11 Flanges
Alloy Steel F91 Flanges
Duplex 2205 Flanges
Super Duplex 2507 Flanges
Carbon Steel Flanges
Copper Nickel Flanges
more info please visit us http://www.radissonimpex.com
Versatile Overseas Is An ISO 9001:2015 Certified Company And Has A Track Record Of Offering A Wide Range Of Piping Solution At Very Competitive Prices. In A Very Short Period Of Time, We Have Gained An Excellent National And International Reputation.
Shijiazhuang Jintai Purification Equipment Co., Ltd was founded in 1994 (reformed from a state-owned enterprise to a private limited liability company in 2004), located at No.69, Tiangui Street, High-Tech Zone, Shijiazhuang , Hebei Province.
The company has been committed to the development of metal porous materials and related technologies and applications. As early as more than 20 years ago, Jintai began to focus on the development and production of metal porous powder sintered filter elements. It has 15 invention patents and utility model patents. It has been a high-tech enterprise and has passed ISO9001 quality management system certification. After more than 20 years of technical accumulation, Jintai can now provide customers with a variety of product materials and specifications to meet customer needs.
The company’s business covers all provinces in China, and some products are exported to Germany, Italy, Spain, India, Taiwan and other places. Some large domestic companies have designated the company’s products. The company’s products mainly include titanium filter, stainless steel filter, sparger, filter, filter device and system, sheet and disc, saucer-shaped filter disc, aeration ring and so on. Products are widely used in medicine, metallurgy, petroleum and petrochemical, fine chemicals, food and beverage, air purification, electronics industry, textile industry, water treatment and other fields.
Cefa Metal was established in 2011. Our company has a factory that has been operating in the domestic market for years mainly engaged in steel grating, iron wire, wirefence and other products. In 2018, we decided to build our export department in Shijiazhuang City, Hebei, China. We are committed to offering stable supply for customers with competitive price, reliable quality and complete solution for your business.
Anping County Anlida Metal Wire Mesh Co., Ltd. was founded in 2001 in July and was formally established company in 2006. Which is located in Anping County, Hengshui City, Hebei Province, next to the da guang express way. It is “the quality standard of qualified enterprises” Hebei ProvinceChina construction metal doors and Windows, curtain wall industry “innovative enterprise”, the national federation of industry and commerce hardware mechanical and electronic chamber of commerce building metal doors and Windows, curtain wall) committee “vice President of units, commodity wholesale market in the development of China market society committee” merchants nationwide credit management model “, “member of” China hardware products association.
Our products:Expanded Metal Mesh,Aluminum Metal Mesh,Perforated Metal Sheet,Grating,Wire Mesh, etc.
The development direction of the company has a perfect IS09001 international quality management system, and has a group of senior team full of enthusiasm, including experienced, technical comprehensive, excellently engineer, technician team. They constitute the company’s a strong backing.
The company has also quality control in production process and a full range of testing test equipment, which makes that the quality of products can be guaranteed for a long time .We sincerely thank the customers who have given us support and love over the years. We hope to get your continued support, as always, we will provide you with the best quality products and services.
CRS is a leading manufacturer of thermit welding materials in China, we have more than 30 years experience of designing thermit welding to the rails. Focusing on rail welding used for railroad, metro, tram, crane rails, turnel construction and maintenance.
We have production area of 2500 square meter, with fully automated batching system, sand mould automatic production & drying machines, equipped with full range of raw materials and welding joint testing equipments. Rail aluminum thermit welding material has been promoted and well applied in the railway lines such as the Beijing-Shanghai high-speed railway line, Jinqin passenger line, Daqin line, Tong-Rang line and Tong-huo line. Materials have been exporting to Australia, Indonesia and other countries many years, the products have won praise.
CRS possesses a qualified team of technicians and engineers who have been improving the quality and performance of products, Certified to the ISO9001:2000 standard, CRS’ welding products have been supplied to a wide range of customers worldwide. Thermit products have been passed Chinese rail welding standard TB/T1632-2005 test, Railway Ministry of China, as well as Australia standard AS1085.15-1995 test, Indonesia welding joint inspection test, Taiwan SGS quality inspection test. We are ready to provide technical & operation training, qualification and certificate for customers to ensure a standardized quality and performance of the welding products.
Our factory is an enterprise manufacturing pipe fittings for more than 30 years. It is supplying Malleable iron fittings, Ductile iron fittings , Gray iron fittings and other steel products, with long history and unchanging faith of producing high quality products.
Main products：Malleable iron pipe fittings, Tube clamps, Air hose couplings, Camlock couplings, Carbon steel pipe nipples, Electric power fittings, Steam couplings, Gas meter connectors etc.
- Founded in 1986, Covering 12,000 square meters, having more than 200 workers. We have a registered capital of 8.88 million, and the annual export volume of 10 million USD.
- As a high-tech enterprise, we have our own R&D team, which can open molds through samples or drawings provided by customers, and even assist customers in developing new products through functional descriptions.
- From purchasing material, casting, annealing, trimming, galvanizing, machining, packing, to exporting, have formed stop production system.
- Various casting techniques: Currently 90% of the products have been changed to coated sand production. And equipped with coated sand production line, which can control the quality requirements of coated sand, and coated sand buried box casting line, further improve the quality of products. Most suitable casting way can be defined according to any products.
- casting surface: our own researched prescription of sand and mold design is used, there’s no joint line, no shift, no sand inclusion, no crack on products, we will satisfy every client.
- Material assurance: on –the –spot sample analysis+ chemical composition analysis after casting, double tests to guarantee stability of material. Electric heating automatic temperature control equipment can precisely control the furnace heats uniformly to ensure product are with the same tenacity.
- Surface treatment: self-color + rust preventing oil, electroplating, hot dip galvanizing, first electroplating and then hot dip galvanizing, first electroplating and then backed galvanizing, first electroplating and then plastic spraying. Different products need different surface treatment, best surface treatment can be defined according to different products.
- Machining technique: we have professional threading machines and CNC lathes to make threads, threads are 100% within specified scope of gauge and plug gauge, included angle of threads is within 90°+-0.5°. High efficiency and high quality producing way make our products have more market value.
- Our certificates: Our factory passed TSE for Turkey, INMETRO for Brazil, and CE, ISO9001:2008, IQNET etc.
- Our clients: Our factory is cooperating with many well-known enterprises, main market for malleable iron pipe fittings is Europe, main market for pipe clamp fittings is U.K., and main market for air hose couplings is USA. There’re also many different kinds of products for specialized application, and are very advantageous in their fields.
Our website:http://www.donghuancast.com
SHAHE JI JIN PETROLEUM COKE TRADE CO.,LTD is the enterprise which is specialize in manufacturing and exporting a variety of Coke China.
We have the strong economic base and comprehensive technology. We have excellent equipment, advanced technology, strong technical force and reliable product quality, adopt a scientific approach to manage. And the products are often sold in Europe, North America, Southeast Asia and other countries.
Our company has been implementing purpose that “people-oriented” management model, adhere to “quality first” and the customer is “God”. Providing the market with good quality and reasonably priced products, and having been recognized praised, thereby established a trusting relationship. We are willing to jointly develop the market, and establish long term partnership on the basis of mutual benefit with customers at home and abroad. We sincerely welcome customers to visit our factory and negotiate business.
Our aim is “exchange for your trust and support, mutual benefit and win-win with the good service and empressement”. We are willing to wholeheartedly work with colleagues from home and abroad to create the future.
Longhai Steel Inc. is a China-based producer of steel wire. The Companys operating variable interest entity is Xingtai Longhai Wire Rod Co. Ltd. The Company produces steel wire ranging from six millimeter to 10 millimeter diameter for use primarily in construction applications. The Companys products are sold to several distributors who transport the wire to nearby wire processing companies that make a variety of products including screws, nails, and wire mesh used to reinforce concrete and for fencing. Longhai Steel Inc. has an annual capacity of 1.5 million metric tons of steel producing. The Companys production facilities are located at a 200,000 square meter property in Xingtai, Hebei.
Handan Zhuoli Fine Steel Plate Co., Ltd., located in Handan city, Hebei province, which is called “Town of Steel and Iron”, enjoys the ascendant geographic location, abundant mineral resources and convenient transportation.
Nowadays, there are more than 1000 staffs, including 30 senior engineers and technical personnel from various fields. During the yearly rolling development, the scale of Zhuoli has changed a lot, from small to large, weak to strong and stay in a high level till now. Meanwhile Zhuoli has strengthened management, renewal the concepts, relying on technological development and the innovation breaks, made the local resource advantages in industrial and scale advantages, At present, Zhuoli has became the large-scale production base of Fine rolling coils with the productivity of 1.5 millions MT/year of products from our stocks. And our company owns self-operation Import & Export right, there are 35 professionals engaged in our international trade Dept..
Our products as “zhuoli” brand was exported to morn than 20 countries and areas including India, Iran, Kazakhstan, Srilanka, Korea, Brazil, Ethiopia and so on. These goods has been honored as the nationwide famous brand and quality products, also obtained the certificate of quality system ISO9001:2000.
We believe “the market depends on the quality”, we insist on guiding production with top technical skill, keeping benefit from the quality and developing through the credibility.
We will base on the principle of “never satisfies and pursues better’, and wishes to sincerely cooperate with old and new customers both here and abroad, create brilliant future together.
DAPENG Pole line hardware is used by to facilitate the construction and installation of overhead telephone and electrical cables and conduits.
Pole line hardware is used by to facilitate the construction and installation of overhead telephone and electrical cables and conduits. This hardware can include a wide range of different components, each of which has a specific function. EOEY Electric supplies pole line hardware that suits the specific situation of multiple diverse industries. Our components are versatile and are designed to work well with different manufacturers and brands. The pole line hardware supplied here is also capable of supporting multiple cables and varying dimensions. When you talk to ROEY about your hardware for overhead cabling, you’re getting the best possible experience.
Brand name:DAPENG
- raw material:carbon steel, stainless steel
- Surface treatment: hot dip galvanized, cold galvanizing
- Minimum order quantity: >500pcs
- Standard: DIN, ASTM, GB
More information you can click here
Submersible Pump is mainly used for carrying water from a deep well and boosting and is widely used in farmland irrigation, water draining in urban and rural areas and mines and industrial enterprises and water conservancy works.
Linqing Hongji (Group) Co., Ltd., is located in Linqing city industrial park of Shandong province, is a group of companies specialized in industrial manufacturing, real estate development, construction and textile. Our group, with registered capital of RMB 1 billion and 3,000 employees, is the most potential enterprise in the west of Shandong.
The grand color steel sheet project, in total investment of RMB 5 billion, covers an area of 300 acres, including 300 thousand tons of galvanized steel plate and 200 thousand tons of prepainted galvanized steel production line, 600 thousand tons of painted steel pickling project and 300 thousand tons of cold-rolled sheet project.
Hongji Group has been certified by ISO9001 in 2007. HONGE brand steel plate was honored “Shandong Famous Brand” and “Shandong Famous Trademark”, and our company has been appraised as “Star Enterprise” and “Large Taxpayer”.
Creating value for customers, creating the domestic first-class steel coil brand, is the eternal pursuit of Hongji people.
Submersible slurry pumps are applicable for conveying medium such as sand, sludge, ore slurry, coal slurry, sand, stones containing big solid particles.
Shandong Zhongtian Composite Material Co., Ltd. was established on October 1st, 2007, located in New Century Industrial Area, Guanxian,Liaocheng city, Shandong, China, which is known as an old revolutionary base full of resource and talented people. There is 20 kilometers distance from here to Beijing-Kowloon Railway. Express goes across here too. Our geography location is very good.
Our company is a modernized non-government enterprise. We keep science and technology as the impetus for the development of our company. Our products include high-precision hot galvanized steel sheet (coils), hot-coating Al-Zn-Si steel sheet (coils), and Prepainted steel sheet(coils) and equipment. We have integrated both manufacture and sale.
Our leading products are hot galvanized steel coils and hot-coating Al-Zn-Si steel coils and prepainted steel coil. For the Galvanized steel coil and Aluzinc steel coil,we can produce the width 500mm-1050mm and thickness 0.14mm-0.8mm. For the Prepainted steel coil,we can produce the width 500mm-1250mm and thickness 0.18mm-1.5mm. For the corrugated steel sheet, we can produce as per client’s requirement.Our annual production is 400,000 tons. In June, 2008, our company successfully developed high-strength hot galvanized sheet, with width of 500mm-1000mm and thickness of 0.14mm-0.80mm. This product is mainly applied to corrugated tile manufacture and has passed ISO9001 quality control system authentication.
With an asset of 500,000,000 Yuan, our company covers an area of 170 acres, with 380 employees, of whom there are 32 engineering technological staff members and 8 senior engineers. Our company is one of the key enterprises in Liaocheng City of Shandong Province, and Top 500 non-government enterprise of Shandong.
Regarding “development on the basis of science and technology, efficiency on the basis of reputation” as development strategy, we walk on the road of science and technology, and actively introduce advanced management experts, keep on developing and innovating. We are willing to work with friends from all walks of life. Vast numbers of customers are welcome to join hands in creating a brilliant future with us
Xinxing Ductile Iron Pipes Co., Ltd. is a steel and iron smelting company in China which is one of the 520 national key enterprises. Their main products include ductile cast-iron pipes and pipe fittings, steel grating, foundry products and others. The company was founded in1997 and is headquartered in Heibei.