Steel grating is generally made of carbon steel, and the surface is hot-dip galvanized, which can prevent oxidation. It can also be made of stainless steel, and the steel grating has the properties of ventilation, lighting, heat dissipation, anti-skid, explosion-proof and so on.
Steel grating is a kind of steel product with square lattice in the middle, which is cross-arranged with flat steel according to a certain spacing and horizontal bars, and welded by pressure welding machine or manually. Steel grating is mainly used as gutter cover. , steel structure platform plate, steel ladder step plate, etc., the cross bar is generally made of twisted square steel.
Advantages of steel grating fence
Material saving: the most material saving method under the same load conditions, correspondingly, the material of the supporting structure can be reduced;
Reduce investment: save material, save labor, save construction period, free of cleaning and maintenance;
Simple construction: on the pre-installed support, it is fixed with bolts or welding, and it can be completed by one person;
Save construction period: the product does not need to be reprocessed on site, and the installation is very fast;
Durable: It has been hot-dip galvanized anti-corrosion treatment before leaving the factory, and has strong impact and heavy pressure resistance;
Modern style: beautiful appearance, standardized design, ventilation and light transmission, giving people an overall smooth modern feeling;
Lightweight structure: less material, light structure, and easy to hoist;
Reduce wind resistance: due to good ventilation, the wind resistance is small in case of strong wind, reducing wind damage;
Anti-contamination: no rain, snow and dust;
Other advantages: ventilation, lighting, heat dissipation, explosion-proof, good anti-skid performance;
Simple design: no need for small support beams, simple structure and simplified design
Acid and alkali corrosion ability: in the range of PH 6 to PH 12.5, a stable protective film is formed on the surface of the zinc layer, and the corrosion resistance is good.
Steel grating use
Steel grating is suitable for alloys, building materials, power stations, boilers, shipbuilding, petrochemical, chemical and general industrial plants, municipal construction and other industries. It has the advantages of ventilation and light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy to clean and easy to install.
Steel grating has been widely used in all walks of life at home and abroad, mainly used as industrial platforms, ladder treads, handrails, passage floors, railway bridge sideways, high-altitude tower platforms, drain covers, well covers, road grilles, three-dimensional It can also be used as a fence for parking lots, institutions, schools, factories, enterprises, sports fields, and garden villas.
As a Concertina Razor Wire Suppliers, share it with you.
Feature
Razor barbed wire, also known as scraper barbed wire, is a new type of protective net product developed with strong protection and isolation capabilities. The sharp knife-shaped thorn is formed into a bellows shape by a double-line buckle, which is both beautiful and chilling. Played a good deterrent effect. At the same time, the product has the advantages of beautiful appearance, good anti-blocking effect and convenient construction.
Concertina Razor Wire
Razor-barbed wire is generally used for protection in prisons. Because the blade is sharp and not easy to touch, it has a certain deterrent effect. The razor-barbed wire has a wide range of uses. It can be used for wall protection of residents and can also be used for enclosure. The anti-theft effect of the barbed wire is better than that of ordinary barbed wire, and the price is not high, so the razor barbed wire is more and more widely used.
Razor wire, also known as razor wire, is a new type of protective product developed with strong protection and isolation capabilities.
Stainless steel barbed wire is different according to the different application areas containing nickel. The effect of using 304 stainless steel in a dry indoor environment is quite good. However, if you want to maintain its appearance outdoors in the countryside and cities, you need to wash it frequently. In heavily polluted industrial areas and coastal areas, the surface will be very dirty and even rusty. However, to obtain the aesthetic effect in the outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other construction purposes. However, 316 stainless steel is best used in severely corrosive industries or marine atmospheres.
Razor nets have been widely used in military powerhouses, prisons, government agencies, banks, and living quarters, private houses, villas, doors and windows, highways, railway guardrails, and borders to protect security in various countries around the world.
Our company also has Concertina Razor Wire for Sale, welcome to contact us.
PEILING TECH. based in Hebei province of China and established in 2007.
We have set up our competitive advantage in the world market like garden hardware products/ fence system products / pet products and so on. Professional team, scientific management system, all of which have guaranteed us the leading position in garden field, our main market are America, Europe and Australia.
Our enterprise spirit are” focus, professional, innovation, customer first, sustainable development.”, exactly as” Specialty, Creative, Service “. We insist that” High quality is company’s greatest repayment; satisfaction of customer is the ultimate aim of us”. We devote to help our customers to be the best in their own market with our most competitive products and best service.
Our company specialized in Kennel, Wire Mesh, French Gate, Bar Gate, Entrance Door, We offer customized services, please via:https://www.peilingtech.com/
Galvanized Steel Fiber, an alternate concrete reinforcing material are high tensile galvanized steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
Compared with the normal cold drawn steel fiber,in addition to all the advantage of normal steel fiber(such as excellent tensile strength, bending and shearing strength, high tenacity, resistance against the cracking, impact and fatigue ), this fiber still has a better corrosion resistance when the steel fiber exposure to the air, as there is a zinc thickness on the surface of this fiber.
The concrete with GuangYa steel fiber can be widely used in industrial floor,transportation constructions(roads, bridges, tunnels, airport runways), the concrete prefabricated unit, etc…
Advantage to use the China steel fiber in concrete:
High impact resistance.
Remarkably increased flexural strength.
Improved structural ductility.
Exceptional control over cracking.
Increased durability by providing crack control.
Glued Steel Fiber, an alternate concrete reinforcing material are high tensile steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
steel fiber reinforced concrete supplier improve the mechanical properties concrete and materials such as ductility,
energy absorption, fatigue, and toughness. This fiber helps to controls plastic shrinkage cracking in concrete; helps reduce or eliminate need for conventional reinforcement.
Application of Glued steel fiber reinforced concrete
- For concrete flooring
Industrial floors
Joint-less floors
Floors-on-piles
Lightly loaded floors
Liquid tight floors & composite metal decking
- stainless steel fiber supplierFor Hard Standing & Heavy Duty
Parking lots
Playgrounds
Airport runways
Taxiways
Maintenance hangers
Access roads & workshops
Ports& Containers for port pavements
Container terminals
Bulk storage areas access roads
For army tank movement
- steel fibers for concrete reinforcementOther Applications
Foundations
Traditional cellar and basement walls
Compression layers
Tunnel engineering
Compared with the GuangYa loose steel fiber the operation and advantages of the glued steel fiber:
- Add the steel fiber directly into the belt, the whole row of steel fiber as a whole, evenly dispersed in the concrete corner
- The water-soluble glue begins to dissolve in a row of steel fibers in the premise of the dispersion, it is again dispersed in every corner of the mono filament fiber, showing the perspective in the concrete of the fiber mesh, which plays an integral strengthening.
- Compared with mono-filament fibers, China bonded steel fiberswill not be bundled to ensure that the fibers in concrete do not coalesce and distribute evenly.
Glued steel fibers are loose hook-end fibers that are bonded together in a row. The great difference between loose fiber and glued fiber is that the former is easy to clog and the latter is easy to disperse evenly.
Welded razor mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport.
Model: BTO-22, BTO-28, BTO-30, BTO-60, BTO-65
Brand: YUJUN
Code: 73144900
Welded Razor Mesh Specification:
Color: GREEN, WHITE
razor wire security fencing Size: 75mm X 150mm, 150mm X 300mm, 177mm X 400mm, do as required
Material: galvanized, stainless steel
Welded stainless steel razor wire Description
Welded razor mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport. Razor wire mesh is used in operations to pave the field after the installation of a blade barrier. This product can protect you and your property, and ensures the safety of the protective barriers.
This YUJUN razor wire security fence product is almost impossible to climb or cut off with the standard tools, also it has a neat appearance.
Razor mesh is installed in various parts of the world’s airports, military bases, water substation, the border fence, oil depots, factories and so on.
Razor mesh security fence China the benefits
1 it is almost impossible to climb
2 high-strength steel core very difficult to cut off
3 powerful security fence barriers neat appearance
4 no secondary use, so he will not be stolen
5 extremely simple to install, needs three to four to install molding.
More information please click here.
Concertina razor wire manufacturer Description:
Model: BTO-22, BTO-28, BTO-30, BTO-60, BTO-65
Brand: YUJUN
Code: 73130000
razor wire grinder supplier Specification:
Color: green, white, red
Size: 200mm, 300mm, 450mm, 500mm, 600mm, 730mm, 960mm, do as requred
Material: galvanized, galvalume, stainless steel
razor barb wire for sale Application
The razor sharp barbed hooks of the razor wire and the small distances between the blades provide an effective protection.
The razor barded wire is both a formidable physical barrier and an excellent psychological deterrent. So it protects from the vandals to vulnerable sites, which like jail, military, airdrome, high security border barrier.
YUJUN barbed wire razor wire Material:
Stainless steel razor wire, galvanized razor wire
Concertina Razor Wire Assortment:
Stainless steel razor barbed wire,
PVC coated razor barbed wire,
Electric galvanized razor barbed wire,
Hot dipped galvanized razor barbed wire.
Stainless steel razor wire Advantages:
- High security
Barbed razor wire with the sharp razor guarantees a high security whilst retaining high quality.
- Long life
Razor wire material of stainless steel or hot-galvanized makes sure for long life and low maintenance.
- Easy installation
Short sections needed for urgent security can be installed extremely fast and with little equipment, allowing repairs to be carried out without compromising perimeter security.
More information about Yujun via https://www.sinorazorwire.com/
High security fencing also called ‘358 FENCE’ ‘3510 fencing’ ‘antifinger fencing’ ‘clearvu fencing’. It is a high cost version of Loni ChieFence 358 anti climb mesh. The panel is welded with reduced carbon steel cable ， Material Grade: Q195, Surface treatment by Electrostatic polyester powder roaming finish(Powder-coated) over galvanized materials. And after that attach the fencing panels with message by suitable clamps(Clips). As a result of the 12.7 * 76.2 mm small mesh dimension, it is anti cut & anti finger climb.
358 high security fence China FEATURES
Anti climb
See-through panel
Anti-rust,Long Service Life
Fast Installation
Customer specs available
Rigidity
Learn more about our wire mesh via https://www.chiefence.com/
Welded mesh fence likewise called “3D FENCE” “medium-security fencing”. It is an affordable version of steel fence. The panel is bonded with low carbon steel wire. Material Grade: Q195, Surface therapy by Electrostatic polyester powder roaming finishing(Powder-coated) over galvanized products. And after that connect the fencing panels with article by suitable clamps(Clips). Because of its Simple framework, Easy installation and also Beautiful look.More customers regard welded wire mesh security fence as the preferred common protective fence.
Loni ChieFence 3d security fence FEATURES
Lower budget
See-through panel
Anti-rust, Long Service Life
Fast Installation
Customer specs available
Rigidity
We have all molds of Thailand S expanded metal,the metalmeshcorp gothic mesh hole pattern looks nice and is a good choice for decoration and architecture.The surface finish including powder coated and galvanized,standard sizes 4ftx8ft.
How to Order S Expanded Metal ?.
When ordering or specifying Expanded Metal wholesale , please confirm:
The Style
Flattened or Raised
Material
Sheet Size
Example: Expanded Metal S-18 Flattened,carbon steel, standard 4′ x 8′ sheet.
Features of Standard S expanded metal
Smooth surface. It supplies a safe and smooth surface, which will not hurt people.
Corrosion and rust resistance. Various surface treatment and aluminum, stainless steel materials have outstanding chemical stability.
Lightweight. The Sexpanded metal sheet is lightweight and it can save materials and freight costs.
Easy to install and uninstall. The installation of S expanded metal sheet is easy and no need any special tools.
Application of Hot Dipped Galvanized Expanded Metal Mesh:
Architectural applications include ceiling panels, fencing, partitions, speaker grilles and store displays.
Some decorative applications include interior and exterior design facades, screening, sunshades, building cladding and ceiling and wall lighting.
As a Concertina Razor Wire Suppliers, share it with you.
Feature
Razor barbed wire, also known as scraper barbed wire, is a new type of protective net product developed with strong protection and isolation capabilities. The sharp knife-shaped thorn is formed into a bellows shape by a double-line buckle, which is both beautiful and chilling. Played a good deterrent effect. At the same time, the product has the advantages of beautiful appearance, good anti-blocking effect and convenient construction.
Concertina Razor Wire
Razor-barbed wire is generally used for protection in prisons. Because the blade is sharp and not easy to touch, it has a certain deterrent effect. The razor-barbed wire has a wide range of uses. It can be used for wall protection of residents and can also be used for enclosure. The anti-theft effect of the barbed wire is better than that of ordinary barbed wire, and the price is not high, so the razor barbed wire is more and more widely used.
Razor wire, also known as razor wire, is a new type of protective product developed with strong protection and isolation capabilities.
Stainless steel barbed wire is different according to the different application areas containing nickel. The effect of using 304 stainless steel in a dry indoor environment is quite good. However, if you want to maintain its appearance outdoors in the countryside and cities, you need to wash it frequently. In heavily polluted industrial areas and coastal areas, the surface will be very dirty and even rusty. However, to obtain the aesthetic effect in the outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other construction purposes. However, 316 stainless steel is best used in severely corrosive industries or marine atmospheres.
Razor nets have been widely used in military powerhouses, prisons, government agencies, banks, and living quarters, private houses, villas, doors and windows, highways, railway guardrails, and borders to protect security in various countries around the world.
Our company also has Concertina Razor Wire for Sale, welcome to contact us.
Ceramic lined pipe is made through the self-propagating high-temperature synthesis (SHS) technique.
Self-propagating High-temperature Synthetic process
Self-propagating high-temperature synthesis (SHS) is used to describe a process in which the initial reagents (usual powders), when ignited, spontaneously transforms into products due to the exothermic heat of reaction.
The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features like abrasion resistant, heat resistant, and corrosion-resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry, etc. It has many advantages over steel pipes, cast stone pipes, and steel-plastic compound pipes.
Usage of Ceramic Lined pipe
The ceramic-lined pipe transportation has been widely used in the industries of electric power, metallurgy, coal, petroleum, chemical engineering, building materials, mechanism, and so on.
The ceramic lined elbow throughout the power, metallurgy, coal, petroleum, chemical, building materials, machinery, and other industries, and high-speed development. When lining the wear-resistant ceramic elbow to deliver high grinding material (such as ash, coal, ore powder, etc.), there is a lining of wear-resistant ceramic elbow wear fast, especially the elbow Wear faster. When lining a ceramic-lined elbow to deliver a highly corrosive gas, liquid or solid, there is a problem that the lined wear-resistant ceramic elbow is corroded and is quickly damaged.
There is a problem that it is expensive to use a heat-resistant steel pipe when the material having a higher temperature is conveyed in the lining of the wear-resistant ceramic elbow. After lining the wear-resistant ceramic elbow, these problems are solved.
The ceramic lined elbow is widely used in wear and tear of mine filling material, ore powder and tailings transportation, coal-fired power plant powder, smelting, ash and other things lined with wear-resistant ceramic elbow are also very appropriate.
The ceramic lined pipe, Elbows, Reducer, Tees, and others manufactured in our factory have been used in over 200 thermal power plants, more than 50 mines, and the industries of coal, building materials, mechanism, petroleum, and so on.
Abrasion
Ceramic layer Ceramic Lined Reducer Pipe with flange reducer Al2O3 content greater than 89%, micro-hardness HV1000-1500, which has high abrasion resistance, wear resistance more than ten times higher than carbon steel after quenching, superior tungsten carbide drill.
Application range
- coal pulverizing system of power plant pipeline, including, powder transmission pipeline, thick powder separator pipeline, coal drop pipe, combustion system of a windpipe, a secondary air pipe, three pipeline and burner pipelines, in addition to ash slagging system the discharge pipe, powder pipe, dry ash conveying pipe;
- Iron and steel plant raw material conveying pipeline, collecting pipe, dust pipe, ash pipe, ash pipe, mixing pipe, grinding export pipeline, coal pipeline, coal pipeline, separator pipe, burner radius pipe, etc.;
- Cement plant selection machine outlet pipe, choose machine inlet pipe, pipe dust pipe, vertical mill outlet pipe, circulating air duct, high-temperature air blower, lower material pipe, etc.;
- Petroleum, chemical, mining, coal, coal washing plant, smelting, paper, aluminum, building materials, powder engineering, food machinery, and other processing and conveying material pipes.
Corrosion
Ceramic materials are neutral, chemically stable, have excellent corrosion resistance and acid resistance, resistant to various inorganic acids, organic acids, organic solvents, and their degree of corrosion of stainless steel is more than ten times.
Temperature
Temperature above 2000celsius degree, long-term work in the range of -50 -900 celsius degree.
Easy welding.
The ceramic adjustable tube can be welded, flanged, flexible connectors, and other fast way links, very easy to install.
Clean and easy maintenance
Smooth walls, can prevent scaling, fouling, and self-cleaning functions. Tightness.
Remarks:
- Under the direction of the arrow diagram for the export direction.
- Bend radius is usually 1.5-5 times the diameter of steel pipe (1.5-5D).
- Othe specifications of the composite pipe can be manufactured according to the user requirements.
- The weight is calculated by theoretics, maybe have some tolerance, and real weight will be weigh-in after they finish.
Hoop strength is the resistance against radial pressure. The strength of the ceramic-lined steel composite pipe is 300 to 500MPa.
Features and Advantages of ceramic lined pipe
Ceramic Liner pipe is a high technology production technology-self-fuel high-temperature clutch synthesis method.
1). High Abrasion Resistant:
Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. The composite ceramic-lined steel elbow was used in a mining plant for about fifty thousand hours. The general service life of a common steel elbow is about 700 hours.
2). Corrosion Resistant:
Corundum is a neutral material and is acid-proof and fouling-free.
3). Heat Resistant:
Ceramic lined composite steel pipes can work under circumstances of -50 to 800 Celsius degree.
4). Lower Weight and Convenient Installation:
The ceramic-lined steel pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install.
For the pipes with the same sizes, types, and lengths, the weight of the ceramic pipe is about 1/2 of the wearable cast alloy steel pipe’s, while the cost has reduced 10%~20% per meter.
The weight of ceramic-lined steel pipe is about 1/3 of the cast stone bent pipes, 1/2 of the cast stone straight pipes.
Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion-resistant ceramic by SHS ——-Self-propagating High-temperature Synthetic process.
- The ceramic-lined steel composite pipe can be joined by welding the steel pipe layer.
- Ceramic-lined pipes can take place of expensive stainless steel, titanium, nickel, cast stone, or alloy pipes.
- Extended service life can also reduce maintenance costs.
Self-Propagating Ceramic Pipe
Self-propagating ceramic steel pipes create a new generation of abrasion and corrosion-resistant engineering pipelines.
The self-propagating ceramic steel pipe has very good wear resistance, Excellent corrosion resistance, and Excellent thermal resistance performance.
SHS-self-propagating ceramic steel pipe and elbow create a new generation of abrasion and corrosion-resistant engineering pipeline. The composite pipe is composed of three layers: ceramic, intermediate, and steel layers.
The ceramic layer is formed by molten alumina at a temperature above 2500 degrees. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the steel pipe.
Applicable Industries:
- The pipe needs excellent wear resistance property: Power plant, Mining, Sea Port, Coal Plant, And pipe for transporting the powder, slurry, sand, etc.
- Coal washing plant, pipe for transporting coal and other material.
- Pipe for transporting the melted aluminum.
- Any pipe which needs to wear protection, corrosion protection, etc.
Benefits:
- Excellent wear resistance, Alumina content of the ceramic liner is higher than 95%, Hardness HV1000-1500. The wear protection performance is more than 10 times better than carbon steel after quenching,
- Excellent corrosion resistance, stable chemical properties.
- Excellent thermal resistance performance up to 2000℃ Can be used in the area from-50℃ to 900℃ for a long time.
- Can be connected with another pipe by welding, flange and soft fast connecting, and easy installation.
BEISAI is large-scale joint-stock group foundry enterprise, divided into Hebei BeiSai Metal Products Co., Ltd and ShiJiaZhuang BeiSai Trade Co., Ltd. which was builded in 2003, located in ShiJiazhuang province City. company net assets is up to CNY 45 Milion, The annual production capacity of 60000 Tons casting iron parts. More than 300 employees here. There are 5 senior casting engineers and 21 technical engineers etc. We have 26 sets of centrifugal casting machines and 5 sets of autoumatic machine painting lines and 3 sets of automatic hydraulic pressure testing machines, we have very perfect testing and checking equipment and testing lab, 100% make sure all products are top-quality.
At present our major products and service is Casting Iron Pipes, Fittings, SS Couplings, Carton Steel Clamps which was used for sewer drainage system of buildings. And Casting iron manhole covers and frame, Casting tree gate and Casting valves , fire protection fittings and connectors, Casting cooking hardware, etc.
We also can produce all kinds of large or small machine casting parts and auto casting parts and pump housing and pump console/ impeller and casting pulley according to the drawing or samples.
All our products are fully meet USA and European and National standard ASTM A888/CISPI301/CSA B70, ASTM-A536, DIN 19522, EN877, BS EN877, ISO6594, BS437, BS416, KSD 4307, EN124:1994, BS 497-1:1976, ISO2531, BS EN545/EN598, AWWAC 151, KSD 4311, AS 2280, GB/T13295, GB/T12772 etc.
Glued Steel Fiber, an alternate concrete reinforcing material are high tensile steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
steel fiber reinforced concrete supplier improve the mechanical properties concrete and materials such as ductility,
energy absorption, fatigue, and toughness. This fiber helps to controls plastic shrinkage cracking in concrete; helps reduce or eliminate need for conventional reinforcement.
Application of Glued steel fiber reinforced concrete
- For concrete flooring
Industrial floors
Joint-less floors
Floors-on-piles
Lightly loaded floors
Liquid tight floors & composite metal decking
- stainless steel fiber supplierFor Hard Standing & Heavy Duty
Parking lots
Playgrounds
Airport runways
Taxiways
Maintenance hangers
Access roads & workshops
Ports& Containers for port pavements
Container terminals
Bulk storage areas access roads
For army tank movement
- steel fibers for concrete reinforcementOther Applications
Foundations
Traditional cellar and basement walls
Compression layers
Tunnel engineering
Compared with the GuangYa loose steel fiber the operation and advantages of the glued steel fiber:
- Add the steel fiber directly into the belt, the whole row of steel fiber as a whole, evenly dispersed in the concrete corner
- The water-soluble glue begins to dissolve in a row of steel fibers in the premise of the dispersion, it is again dispersed in every corner of the mono filament fiber, showing the perspective in the concrete of the fiber mesh, which plays an integral strengthening.
- Compared with mono-filament fibers, China bonded steel fiberswill not be bundled to ensure that the fibers in concrete do not coalesce and distribute evenly.
Glued steel fibers are loose hook-end fibers that are bonded together in a row. The great difference between loose fiber and glued fiber is that the former is easy to clog and the latter is easy to disperse evenly.
CRS is a leading manufacturer of thermit welding materials in China, we have more than 30 years experience of designing thermit welding to the rails. Focusing on rail welding used for railroad, metro, tram, crane rails, turnel construction and maintenance.
We have production area of 2500 square meter, with fully automated batching system, sand mould automatic production & drying machines, equipped with full range of raw materials and welding joint testing equipments. Rail aluminum thermit welding material has been promoted and well applied in the railway lines such as the Beijing-Shanghai high-speed railway line, Jinqin passenger line, Daqin line, Tong-Rang line and Tong-huo line. Materials have been exporting to Australia, Indonesia and other countries many years, the products have won praise.
CRS possesses a qualified team of technicians and engineers who have been improving the quality and performance of products, Certified to the ISO9001:2000 standard, CRS’ welding products have been supplied to a wide range of customers worldwide. Thermit products have been passed Chinese rail welding standard TB/T1632-2005 test, Railway Ministry of China, as well as Australia standard AS1085.15-1995 test, Indonesia welding joint inspection test, Taiwan SGS quality inspection test. We are ready to provide technical & operation training, qualification and certificate for customers to ensure a standardized quality and performance of the welding products.
An ISO 9001:2008 Certified Company, The Metal Factory is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by The Metal Factory are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes, Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
1. Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
2. Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
3. Square Stainless Steel Pipes, Round Stainless Steel Tubes, Rectangular Stainless Steel Pipes & Tubes
4. Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
5. Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
6. Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
7. LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
8. Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
9. ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
10. Galvanised Pipes as per IS:1239/I
11. Square and Rectangular Steel Pipes as per IS: 4923
12. ERW Boiler Tubes: BS 3059, ASTM A 214
13. Air Pre Heater Tubes to BS: 6323 PART V
14. Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
15. Seamless Heat Exchanger Tubes ASTM A 179
16. CDW TUBES IS: 3074 or BS 980
17. CRCA ERW Tubes to IS 3601 OR IS 3074
18. Stainless Steel Electro polished Pipes Manufacturer/Supplier
19. Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
Wir, Fittings und Flansche ist einer der führenden Hersteller Lieferanten und Exporteure von Edelstahl, Kohlenstoffstahl, legiertem Stahl, Duplex-Stahl, Hoch-Nickel-Legierung Stumpfschweißverschraubungen, Flansche, geschmiedete Armaturen, Bleche, Platten, Spulen, Rundstangen, Stangen , Rohre, Rohre, Auslaufarmaturen in Deutschland.
Expanded metal, also known as metal mesh, refers to any type of metal raw material that can expand in response to different climate changes. This expansion capability makes it ideal for many functions, and it also helps reduce wear on components made with this metal structure. Expanded metal can be used to make many different types of objects, including metal grinders, wall art, furniture and other objects, where the ability to cope with climate change helps protect the integrity of the finished product.
One of the most common examples of such metal products is expanded metal sheets. These sheets can be scored and peeled to create perforation designs, which can then be used to create many different metal products. This method can be used to create mesh designs and is often found in outdoor furniture made entirely or partially of metal parts. The same technique can also be used to create large panels for use as wall art, room dividers, and metal products with similar functionality and decoration. Although expanded metal can expand and contract when exposed to different weather conditions, it is very durable and very suitable for use in many different products.
Expanded metals can also be used to increase the strength of many construction projects. By including metal sheets or even metal strips in the masonry work, it can help maintain the integrity of the masonry over a long period of time. The same method can be used to provide additional strength to plaster and other types of concrete structures. When used to create perforated or diamond-shaped grids, expanded metal can be effectively used to create cages or other enclosures, ideal for everything from animal kennel spaces to storage areas for holding various supplies. One of the advantages of constructing these types of enclosures with expanded metal is that it allows air to circulate freely and improves visibility.
Today, many other applications for metal expansion are also adopted. This includes creating expanded metal fencing that are both decorative and durable. The metal can be used to make grills suitable for outdoor use and various forms of indoor cooking equipment. Many companies use expanded metal to create a variety of products that can be used by individual consumers and business operations, making this metal one of the most widely used material categories today.
In 1984, Yingkaimo Metal Net Co., Ltd. was founded in Anping County Hebei Province, which is the hometown of wire mesh in China. It has Anping Factory, Dezhou Factory and Dubai Office with more than 500 employees. YKM’s annual value of production is about 50 million US dollars, of which 90% of products delivered to more than 70 countries and regions. It is a high-tech enterprise, also a leading company of industrial cluster enterprises in Hebei Province. YKM brand as a famous brand in Hebei Province has been registered in 17 countries around the world for trademark protection. Nowadays, YKM is one of the most competitive metal wire mesh manufacturers in Asia.
Total area of the two factories is about 156000 square meters with more than 400 sets of manufacturing machines, main machines including international advanced technology Japanese-made RGK, German-made Jager and some Chinese-made machines. Annual production capacity for stainless steel mesh is more than 10 million square meters, with range from 1 mesh to 635 mesh of square mesh and highest dutch weave 2800 mesh. The self-designed two epoxy coating production lines are the most advanced epoxy mesh coating equipment in Asia, its annual output is more than 13 million square meters and it makes YKM to be the R&D and supply center for epoxy mesh.
YKM’s main products are stainless steel wire mesh,epoxy coated wire mesh,nickel wire mesh, copper wire mesh, low-carbon steel wire mesh and all kinds of mesh further-processing products.
More information please view:https://www.china-wiremesh.com/
Welded mesh fence likewise called “3D FENCE” “medium-security fencing”. It is an affordable version of steel fence. The panel is bonded with low carbon steel wire. Material Grade: Q195, Surface therapy by Electrostatic polyester powder roaming finishing(Powder-coated) over galvanized products. And after that connect the fencing panels with article by suitable clamps(Clips). Because of its Simple framework, Easy installation and also Beautiful look.More customers regard welded wire mesh security fence as the preferred common protective fence.
Loni ChieFence 3d security fence FEATURES
Lower budget
See-through panel
Anti-rust, Long Service Life
Fast Installation
Customer specs available
Rigidity
Werner Flanges Inc. an ISO 9001:2008 certified Company manufacturing & exporting the finest quality Carbon Steel, Alloy Steel, Stainless Steel Butt Welded Pipe Fittings, High Pressure Forged Fittings & Flanges. Immediate Response, Excellent Quality, Quick Delivery and Customer Satisfaction truly define Werner Flanges Inc.
Wholesale airport security fence, is mostly made use of in the flight terminal for defense. The main panel and also V panel is welded with 4.0 mm/5.0 mm low carbon steel cable. The surface area therapy of QYM airport fencing is galvanized + electrostatic polyester powder coated or galvanized + PVC layered.
airport fence supplier Material:
Material: Low-Carbon Iron Wire
Application:
Airport, Garden Fence, Residential, etc
Airport Fence Y Type Fence China Specification
| Panel | Mesh | Wire Thickness | Surface Treatment | Panel Width | Folds NOS. | Panel Height | Fence Height |
| Big Panel | 50x100mm 55x100mm |
4.00mm 4.50mm 5.00mm |
Galvanized and Electrostatic polyester coated or PVC coated | 2.50m 3.00m |
4 | 2000mm | 2700mm |
| 5 | 2300mm | 3200mm | |||||
| 6 | 2600mm | 3700mm | |||||
| 2 | 530mm | 2700mm | |||||
| V panel | 630mm | 3200mm | |||||
| 730mm | 3700mm |
Tianjin KXC group founded in 2004, is an ISO 9001 certified company,committed to manufacturing valves, valve parts & related products for water works and water treatment projects.
KXC consists of HY Valves Co. Ltd and KXC Metal Co. Ltd within our own factory and foundry. We have machining center, CNC machines, pressure test machining, electric furnace, mould machine, sand blasting machine, given all of this, our products quality always under good control.
KXC mainly produce gate valve(Resilient seat, Metal seat), butterfly valve(Concentric and Eccentric), check valve, ball valve, globe valve and etc. Supported by our many years’ experience and expertise in this field,
KXC can also offer OEM &ODM valves and parts.KXC philosophy is to offer high cost performance products with optimal service. Welcome to visit our factories and KXC will satisfy you in all respects.
Our products:Rising Stem Globe Valves, Double Eccentric Butterfly Valve
Galvanized Steel Fiber, an alternate concrete reinforcing material are high tensile galvanized steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
Compared with the normal cold drawn steel fiber,in addition to all the advantage of normal steel fiber(such as excellent tensile strength, bending and shearing strength, high tenacity, resistance against the cracking, impact and fatigue ), this fiber still has a better corrosion resistance when the steel fiber exposure to the air, as there is a zinc thickness on the surface of this fiber.
The concrete with GuangYa steel fiber can be widely used in industrial floor,transportation constructions(roads, bridges, tunnels, airport runways), the concrete prefabricated unit, etc…
Advantage to use the China steel fiber in concrete:
High impact resistance.
Remarkably increased flexural strength.
Improved structural ductility.
Exceptional control over cracking.
Increased durability by providing crack control.
HENAN FORWARD STEEL EXPORT CO.,LTD
Tel: +86-371-61310228 You also can visit us by sa514steel.com througth google
Address: Tower-A Room 3106 Kai xuan Plaza zhengzhou city of henan province China
http://sa514steel.com
Email: admin@qfsteels.com
SA240 TP310S Stainless, SA240 309S stainless, SA240 316TI stainless, SA240 304H stainless
1. What we do?
HENAN FORWARD STEEL EXPORT CO.,LTD Stainless warehouse provide ASME SA240 Stainless steel plate Bevel,Groove and cutting disc stainless steel machined parts .we have 1000tons tp316L,tp310s,tp304l,tp321, tp304h, tp316h,tp310h, tp321h,2205, S31803, 410, 430, 409, 443, 439, 310SI2, 316TI Stainless steel plate stock.
Besides that, our factory also provide the CNC Cutting platform and water cutting platform. Disc cutting, special parts cutting, stainless steel bevel and stainless steel groove service. Our machined precision to min 0.2 for the surface of machined.
Our cutting service had approved by Mexico and USA, and Canada Project.
2. Our mainly stainless steel grade for ASME SA240
SA240 TP202,SA240 TP201,
SA240 TP304,SA240 TP304L,SA240 TP304H, SA240 TP304N, SA240 TP304LN
SA240 TP316L,SA240 TP316, SA240 TP316H,SA240 TP316N, SA240 TP316LN,SA240 TP316TI
SA240 TP309S, SA240 TP309H,SA240 TP309,SA240 TP309Cb
SA240 TP310S, SA240 TP310, SA240 TP310H
SA240 TP347,SA240 TP347H,
SA240 TP348,SA240 TP348H,
SA240 TP321, SA240 TP321H
SA240 TP317L,SA240 TP317
SA240 TP444,SA240 TP410, SA240 TP430,SA240 TP443, SA240 TP439
3. Products Service of our unitedsteel warehouse.
Stainless steel plate
Stainless disc steel plate.
Stainless steel cutting
Stainless seamless pipe
Stainless seamless Tube
Stainless welded steel pipe
Stainless machined bevel
Stainless machined groove
4. Our Stainless steel thickness
Stainless plates
0.25mm-150mm thickness
Width: 20mm to 2500mm
Length 20mm to 10000mm
Max weight of each plate 6 tons.
Stainless seamless pipe
outer diameter 3.2-200mm,
Wall thickness 0.5-12.7mm
5. Stainless Production time:
5-8days in usual size.
If you need the bevel and groove stainless parts, we need min extra 7days.
6. Stainless Payment Item for HENAN FORWARD STEEL EXPORT CO.,LTD
TT payment Or 30% TT advance and balance should be paid after BL documents.
7. Why you choose us?
a. The faster production time, and most of production, we can control them in one week if the total weight are not large.
b. Better service, we promise that your inquiry will be sent official quotation in 24hours.
c. Faster delivery, we had owned transport truck department and transport stainless to our port in 24hours.
d. Quality promise processing: PMI Test at each stainless steel plates before delivery. We accept the third party inspection, GL. SGS.BV, DNV, LR,ABS and others.
8. Trade Item:
FOB, EXW, CFR AND CIF
Packages by wooden pallet, delivery by containers.
9. How to contact HENAN FORWARD STEEL EXPORT CO.,LTD?
Your can searh our company name from google or visit sa514steel and qfsteels through searching them at google.
Mr David
0086-371-61310228
admin@qfsteels.com
http://sa514steel.com
AQE Gate valves are used to limit the flow of fluid flowing straight through the pipeline. This is an effective and reliable way to stop fluid flow. The Slab Gate Valve can be fully opened or fully closed. The slow opening and closing of the valve helps avoid hydraulic hammers, which can damage the pipes connected to the valve. Gate valves are not used for throttling, so do not let them half open. The gate valve has 3 important parts. They are doors, stems and hoods.
The gate can be used in several variations in a gate valve. You may occasionally use knife doors, or if you use crude oil, you may see flat doors. However, in the marine industry, the most common gate is the wedge. This type of gate valve wholesale uses a wedge-shaped metal sheet that can be moved into the valve body to prevent fluid flow. This uses metal-to-metal contact to create a positive pressure seal. However, under extremely low pressure (5 psi or lower), the gate valve may leak a little.
Learn more about AQE valve via https://www.aqemachinery.com/
Woven Wire Mesh BZ-S001
Material: stainless steel & brass/copper/stainless steel/aluminum
Flexibility: Not flexible
Maximum width: 2.5m
Weight: 7.3kg/m2
Open space: 43%
Surface treatment: PVDF spray paint/PVC coating/electroplating
Stainless Steel Woven Wire Mesh China Detailed instructions
Shade Series BZ woven mesh panels are made of wire or flat steel and the appearance of the mesh is usually rectangular. SHADE series products can adjust the temperature of a building by changing the opening rate and transmission of the mesh. The product can help reduce the energy consumption of buildings and is purchased using different sizes of wire and opening sizes, with a wide range of mesh specifications and appearance. Shade series mesh can be installed as a large area of the facade or used on small areas such as window, partition or handrail filling.
Decorative woven wire mesh wholesale A rainbow of colors
In order to provide customers with more color options, Bzwiremesh can use different processes to make the mesh more colorful.
Bzwiremesh uses paint, fluorocarbon coating, PVC coating or an electroplating process to color the mesh. The usual colors used are gold, champagne, silver, bronze, etc. Color selection can also be made according to the color table provided by the customer.
Bzwiremesh can also produce nets made of brass, copper and other materials with natural colors. By adding brass wire to the BZ stainless steel mesh, the mesh will become a new material.
Anping TianHui Wire Mesh Products Co., Ltd. is located in anping county, Hebei province, which also be called “Hometown of wire mesh”in china. Started the factory from the year 1986, We are one of the top manufacturers and exporters of Woven wire Mesh, Screens and welded Wire Mesh in China.
We has over 160 sets of wire mesh machines, have around 20000 rolls in stock for stainless steel wire mesh & welded mesh. We have gained a global sales network reaching to the Local market, USA, Middle-East, Europe and Africa etc.
Our company has been based on “good quality, timely delivery, reasonable price, considerate service” the purpose to serve the masses of customers; And is in line with “quality seek survival, prestige seek development” production principles, in our emphasis on product quality at the same time, also actively communicate with the customer, understand customer needs, to realize our shortcomings, and for clients to provide professional and timely after-sales service, won the praise of the vast old and new customers. Our products are widely used in petroleum, textile, metallurgy, construction, farming, machinery, landscape protection, production and manufacturing, and other fields.
Our Main Products: Stainless Steel Wire Mesh, Shale Shaker Screen, Crimped Wire Mesh, Dutch Wire Mesh, Copper Wire Mesh, Brass Wire Mesh, Stainless Steel Welded Wire Mesh, Galvanized Welded Wire Mesh, Filter Discs And Wire Mesh Processed Products.
TIANHUI Sincerely hope to establish long term business relationship with worldwide customers on the basis of sincerity and mutual benefits.
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
Stainless Steel Sprocket Product Description
1. Description: This range of sprockets are made from 304 stainless steel material.
2. Standard: British
3. Feauture:
Corrosion resitance
Good quality
Competitive price
Customized possible