BEXIM is Istanbul-based Turkish company with a 10 years of international business experience.
http://bexim.jimdo.com
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
The palisade fence is popular in British, Ireland. It could take you a safe life, also beautify your living spaces.
The use of post accessories and fittings can better help the mesh and post connection. And it is easy and safe.
Anti climb fence is the ultimate security fencing system. The close mesh is used in prisons and other secure facilities as it is virtually impossible to climb. The close mesh also means that the fence is very difficult to cut with anything but power tools.
HUAGUANG FENCE is professionally engaged in manufacturing and sales of good quality wire mesh fence, chain link fence, temporary fence, anti climb fence, palisade fence and different wire mesh products. All are cheap price.
Are you looking for scaffolding products or manufacturers?EK scaffolding is the scaffolding manufacturer and supplier in China. We can provide you all types of scaffolding products, such as scaffolding couplers, scaffolding system, cuplock scaffolding, ringlock scaffolding, base jack, etc.
Dutch woven wire cloth can be woven into plain Dutch weave and twill Dutch weave. They each have their own characteristics and can be used for different applications.
Madhav KRG Group is one of the best TMT bars manufacturers. Madhav KRG Group is the largest reinforcement bars manufacturing group in India.
Inner Mongolia Pusheng Iron & Steel Co,.Ltd is a comprehensive company for steel production and trading. Its business includes production, processing, distribution, logistics and import& export of steel. We have been processing and selling high quality , value add steel products to customers throughout all over the world .
Our company lies in Hohhot , inner Mongolia , it is near by BAO STEEL , The superior location provides us with quality products and reasonable prices , By creating long term relationships and building trust with clients and suppliers, Pusheng is able to offer our clients comprehensive and competitive sales packages with quality goods along with excellent customer service, establishing a firm reputation in inner mongolia ’s steel industry.
Our main products : hot rolled steel coils/sheet , cold rolled steel coils/sheet , galvanized steel coils/sheet /pipe , prepainted steel coil, corrugated sheets and tinplate coils,Ms pipe /plate, stainless steel sheet /pipe etc.
High security fence, also called 358 fence, which is well-known as anti-climb and anti-cut fence. Perfectly suited to high security applications, like military, airport, prison, warehouse, factory etc.
358 Security mesh fence , also called 358 welded mesh fence , it can be used to prisons, military base, power plants, oil refineries, airport terminal, and etc.
PRODUCTS DESCRIPTION
Components:
The HIGH TENSILE ROCKFALL MESH system consists of four main components that are carefully coordinated with each other:
- HIGH TENSILE ROCKFALL NET
It is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
Detailed Product Description:
1. Wire diameter: 3mm 2. High tensile strength 1770Mpa 3. Mesh size:80mm x 140mm 4. Mesh shape:diamond 5. Material:high tensile steel wire 6. Corrosion protection:super coating 7. Coating:150g/m2 8. Breaking load of single wire:12.5KN 9. Tensile strength:110KN/m TECCO mesh standard roll: Mesh edges knotted Roll width: 2.3m-3.5m Roll length: 110m-30m Weight: 1.75kg/m2 |
https://www.xhgabions.com/side-slope-protection-net/
2.SOIL OR ROCK NAILS
Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. |
3.SPIKE PLATES
Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the HIGH TENSILE ROCKFALL MESH. These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope. The plates are galvanized and have dimensions of 13.0”*7.5″*0.4″(330mm*190mm*10mm). |
4.CONNECTION CLIPS
The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These claw are hot dip galvanized and consist of 0.25″(6mm) thick steel spiral. |
5. SOIL OR ROCK NAILS
Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. |
ADVANTAGE
Wherever roads, railway lines or other infrastructures need to be protected against rockfall our drapes made from high-tensile steel wire nets are a perfect economical solution. They allow rockfalls to be controlled and guided into the deposition zones.
Rockfall net benefits
full system tested
the performance and behavior of the rockfall drape can be fully calculated with all its
components, as it has been extensively tested as a complete system.
matching mesh to the rockfall intensity
optimum cost/performance ratio, as the required protection can be achieved with different nettings.
easy installation
our meshes and nets have an excellent strength to weight ratio and are easy to transport. They allow easy unrolling for a quick and simple installation. Even high slopes/faces are protected with minimal impact to the natural environment and minimal carbon footprint.
high-tensile steel wire
durable thanks to high resistance: our nets and meshes have a wire tensile-strength of over 1770 n/mm2 and can withstand high dynamic loads without big deformation.
PRODUCTS DESCRIPTION
Gabions are rectangular cages made of hexagonal double-twist wire mesh filled with appropriately sized rock or quarry stone. Gabions are used in many situations including the stabilization of earth movement and erosion, river control, reservoirs, canal refurbishment, landscaping and retaining walls.Gabions are compartmentalized rectangular containers of galvanized steel hexagonal wire mesh that are filled with stone. While maintaining sufficient strength to contain the stone used as a fill, gabions must be able to settle, twist, and conform to channel and foundation shifts.
In order to meet the various needs, gabions must have the following features:
· Hexagonal mesh pattern critical points
· Double twist to avoid unraveling
· Reinforcing wires woven into corners to reinforce critical points
· A diaphragm securely attached at the base that will prevent the shifting of some and reinforce the gabion.
https://www.xhgabions.com/products/
Certification:
- All gabion basket are manufactured in accordance with the requirements of BS EN 10223-3:2013.
- All wire is in accordance with BS EN 10218-2:2012 and BS EN 10223-3:2013
with an ultimate tensile strength of between 350 to 500N/mm².
- All wire used in the gabion production or accessories shall be Zinc or Zinc 90% Aluminium 10% coated in accordance with BS EN 10244-2:2009 (Class A) with an additional extruded organic polymer powder coating (grey,green) of 0.5mm nominal radial thickness. This organic polymer powder coating is in accordance with BS EN 10245-2:2011.
Reno Mattress, also called as gabion Mattress, is designed following the principle of a mass earth retaining wall. The permanence and flexibility of the triple twisted mesh helps to endure and absorb the forces, which may come from stones or flowing water.
PRODUCTS DESCRIPTION
Certification:
- All Reno mattress are manufactured in accordance with the requirements of BS EN 10223-3:2013.
- All wire is in accordance with BS EN 10218-2:2012 and BS EN 10223-3:2013
with an ultimate tensile strength of between 350 to 500N/mm².
- All wire used in the gabion production or accessories shall be Zinc or Zinc 95% Aluminium 10% coated in accordance with BS EN 10244-2:2009 (Class A) with an additional extruded organic polymer powder coating (grey,green) of 0.5mm nominal radial thickness. This organic polymer powder coating is in accordance with BS EN 10245-2:2011.
https://www.xhgabions.com/gabion/
Specification:
Mesh Wire(mm) | Selvedge Wire(mm) | Lacing Wire(mm) | Hole Size(mm) | Length (mm) | Width (mm) | Height(mm) |
2.2 | 2.7 | 2.2 | 60×80 | 3 | 2 | 0.17-0.23-0.30 |
2.2 | 2.7 | 2.2 | 60×80 | 4 | 2 | 0.17-0.23-0.30 |
2.7 | 3.4 | 2.2 | 80×100 | 5 | 2 | 0.17-0.23-0.30 |
2.7 | 3.4 | 2.2 | 80×100 | 6 | 2 | 0.17-0.23-0.30 |
A reno mattress is a double twisted hexagonal woven galvanized steel wire mesh compartmented basket with a rectangular mattress shape. The compartment or cells of the reno mattress are of equal size and dimension and are formed by internal diaphragms being placed within the basket providing even distribution of the stone fill throughout the mattress even after structural movement. Even distribution of the stone fill ensures that the reno mattress maintains intimate contact with the foundation soil.
construction & installation
for easy handling and shipping, mattresses are supplied folded flat in bundles of 25. Lids are packaged in separate bundles or in rolls for larger units of mattresses.
Shree Ji Steel Corporation has been successfully serving its clients since four generations. We operate from our base in Kolkata, West Bengal but are serving clients all over the world. Shree Ji Steel Corporation has earned the trust, faith and has managed to build a very healthy relationship with every client served. We are an ISO 9001:2015 certified company.
We deal in Steel and Structural Steel products. Our products are used in the Construction and Industrial sector companies. Our product range is in extreme demand in the industry due to its unmatched quality, durability and price.
To meet the various demands of our esteemed customers, we are engaged in export with a number of international nations too. With our flexible payment gateways, prompt deliveries, unmatchable marketing practices, and customer driven approach, we have acquired a position of prominent market leader. We are committed towards our clients and make them pleased with our qualitative product range.
We are regularly embarking on new heights as we are immensely supported by a team of talented workers that not just aim to make money but to work to create a sense of quality and trust and to make the brand world-famous. Our team works in unity which is importantly required for driving the organization to eminent verticals.
358 Welded Mesh High Security Fencing
Product Description
Qijie Company Supplies provides excellent quality security fencing from our main factories in China. Our 358 welded mesh is an aesthetically pleasing welded mesh fencing system used for high security applications. Qijie Company manufactures and supplies the full range of 358 welded mesh systems, in both hot dipped galvanised and powdercoated finishes. We manufacture from 1200mm high right through to 6000mm in height. 358 welded mesh is typically manufactured from a 4.00mm diameter wire, with the aperture 71 x 9.00mm.
Our 358 mesh fencing system has been developed to enhance the industry accepted 358 mesh market with new innovative perimeter posts, mesh, toppings and gates. 358 welded mesh fencing has close spaced steel mesh provides maximum security by being extremely difficult to climb or penetrate using normal hand tools and yet has a minimal visual impact on the surrounds and an important clear line of horizontal sight. All 358 welded mesh security fence systems can be specified using either post and rail systems or successfully utilized as rail-less structures depending on the end use security level requirements.
https://www.qijiemesh-fencing.com/product-list-metal-fence.html
Product Specifications
Example Only of Fencing Specification (We can supply any fencing specification) | |||||
Panels | Clamp Bar | Post Section | |||
Fence Height (m) | Panel Size H x W | Wire Diameter (mm) | Section Flat | Post Centres (mm) | RHS (mm) |
1.8 | 1800 x 2515 | 4 | 40*5 | 2480 | 80*40 |
2.0 | 2000 x 2515 | 4 | 40*5 | 2480 | 80*40 |
2.4 | 2400 x 2515 | 4 | 40*5 | 2480 | 80*40 |
2.7 | 2700 x 2515 | 4 | 40*5 | 2480 | 80*40 |
3.0 | 3000 x 2515 | 4 | 40*5 | 2480 | 80*40 |
4.0 | 4000 x 2515 | 4 | 40*5 | 2480 | 100*60 |
5.2 | 5200 x 2515 | 4 | 40*5 | 2480 | 120*80 |
Qijie Metal Fence:Qijie’s parent company Anping Shenghe Metal Wire Mesh MFG Co., Ltd was set up in 1999. It is located in Anping, which has a reputation of “home of wire mesh” in China. Qijie is particularly established for export by Shenghe. The company implements “one team, two brands” management system and development strategy! The main products are stainless steel insect mesh, fence panels, chain link fence, gabion baskets, woven screening mesh, welded wire mesh, expanded metal mesh, perforated metal and various wire products.
Do you also need 358 security mesh,Feel free to contact us
2S Metal Public Company Limited is a Thailand-based company engaged in the manufacture and distribution of steel products. The Company produces steel sheets, steel pipes, c-channel steels, steel wire mesh, flat bars, c-line steels and other related products. The Company is also involved in the trading of industrial steels, such as galvanized steel tubes, H-Beam, I-Beam, steel round bars, channels, square bars and angle bars. The Company operates two production sites located in Songkhla province and Nakhorn Ratchasima province. It serves customers mainly in the southern part of Thailand and in Malaysia. The Company’s subsidiaries include Neastern Steel Company Limited, which manufactures and trades steel for the northeastern part of Thailand and Lao People’s Democratic Republic, and Mega Trans and Logis Company Limited, which provides transportation services.
Welcome to A LARGE INTERNATIONAL INDUSTRIAL CO.,TIMITED
Our corporation, founded in 2006, is specialized in production and export of various kinds of steel materials. We have five million RMB registered capital and RMB fifty million working capital. Among our clients from America, EC, Southeast Asia and the middle East, we enjoy a excellent reputation through these years’ hard work and experience. The businesses we handle include HOT ROLLED STEELCOLD ROLLED STEEL, WELD PIPE, ELECTRO GALVANIZED WIRES, DEFORMED STEEL BAR and so on with all NIZED WIRES,
With our years of experience and expertise, we are able to offer a high quality range of industrial HOT ROLLED STEEL, COLD ROLLED STEEL, WELD PIPE, ELECTRO GALVANIZED WIRES, DEFORMED STEEL BAR etc. These products are manufactured with latest technology and efficient workforce that leads to provide maximum satisfaction to our clients.
Further, we also offer customized solutions for these products so as to meet the diverse needs of our clients. In addition, our highly skilled team of professionals and experts help us in producing quality products for clients to cater their requirement.If you have any questions,please contact us. We are willing to help you. Hoping to establish a long-term business relationship with you.
With the two decades experience and Keeping track with market development we are engrossed in trading and supplying a qualitative array of a wide range of TMT Bars. These bars are efficiently manufactured utilizing superior grade mild steel and other material with the aid of latest technique in compliance with set industry norms. Our product range is used in many construction sites like shopping malls, residential and multi-storey buildings, highway road projects, factories, hotels and RCC work, industrial heavy foundation etc. For the fabrication.