Eastern Steel is a leading manufacturer and distributor
Custom-made
We use the advanced tools and technology to meet the varied requirements of pipes and tubes for the food processing industry, chemical industry, brewing industry, the pharmaceutical industry, cement industry, oil & gas industry, refineries, and water desalination.
Quality advantages
This was achieved by introduction of the unique equipment as well as the latest methods of quality control and testing of the manufactured pipe products. Modern pipe-rolling facilities, powerful technology base and highly qualified personnel make Eastern Steels competitive on equal terms with the worlds recognized leading brands.
IBC GROUP is dedicated to transforming various metal materials all over the world, through the process of coils, steel sheet, steel pipe, wire, profile,Alloy steel, all variety of metal products to the construction and wide manufacture industry. Meanwhile, because maintain long term friendly business relationship with clients. Enjoy solid trust from our regular clients, already working one-stopstation service in other construction related products Such as metal process equipment .All Enjoy highly comments from our customers.Look forward the chance to develop together.
- 起源地;原产地：
-
中国天津
- 品牌：
-
国际商业中心
- 应用：
-
制作管道、切割片材、制作小工具、制作波纹板、制作容器、制作栅栏
- 类型：
-
钢卷
- 厚度：
-
0.21-0.50mm
- 标准：
-
爱思
- 宽度：
-
1501-2000MM
- 长度：
-
按要求
- 证书：
-
API、 SNI、 BIS、 SASO 、SABS 、sirm、 tisi
- 年级：
-
镀铝锌硅，SGCC，DX51D
- 涂层：
-
AZ121-Z150
- 宽容：
-
±10%
- 加工服务：
-
焊接、冲孔、切割、弯曲、开卷
- 铝含量：
-
55%
- 亮片类型：
-
零亮片
- 涂油或不涂油：
-
轻微上油
- 硬度：
-
全硬
- 交货时间：
-
15-21 天
- 产品名称：
-
镀铝硅
- 最小起订量：
-
1吨
- 表面：
-
低碳钢素面，热浸镀锌，彩色涂层
IBC GROUP- Focus on Value transfer,Outstanding Products and Technologies.
The head office of IBC Group is located in Tianjin, China. Since 2009 we focus on ONE-STOP Metal service, professionally engaged in Carbon steel,Stainless steel,Special Alloy steel,non ferrous metal, construction material and Metal processing Equipment. we keep long-term strategic cooperation with TOP Resources.
Our products widely cover as below
Cold-rolled High Strength Automotive steel,Galvanized & Galvalume steel coil and sheet,Aluminized steel,ZAM Zn-Al-Mg coated steel,PPGI PPGL. Pickled oiled steel.
Roofing sheet,Embossed door skin sheet.Perforated Metal Sheet.Wear resistant plate.
Steel pipe,insulated steel pipe,pipe fittings, Pipe spool and pipe fabrication.
Steel wire,tempered and quenched alloy bar.Steel structure profiles such as Bar and Beam,Purlin.Copper,Titanium.
Our products are widely used in construction, automobile, household appliances, petroleum and natural gas chemical industry, aerospace, coal mining, power plant transportation, agricultural breeding and other fields.we always keep the marketing philosophy “Be honest, trustworthy and mutually beneficial”. enjoyed high comments from clients.
Ashtavinayaka Overseas are manufacturers, suppliers and exporters of high quality stainless steel sheets, stainless steel hot rolled sheet, stainless steel 316 coil, stainless steel polished sheet, stainless steel plate, stainless steel shim sheet, stainless steel coil, stainless steel round bar, stainless steel pipe, stainless steel 304 coil, stainless steel seamless pipe, stainless steel 304 sheet, stainless steel welded pipe, stainless steel 316 sheet, stainless steel erw pipes and tubes, stainless steel 304 plate, in Mumbai, stainless steel 316 plate India.
Our Stainless Steel Products
Stainless Steel Plate
Stainless Steel Sheet
Stainless Steel Coil
Stainless Steel Pipe
Stainless Steel Seamless Pipe
Stainless Steel Welded Pipe
Stainless Steel ERW Pipe
Stainless Steel Round Bar
Stainless Steel Rod
Our High Nickel Alloy Products
High Nickel Alloy Plate
High Nickel Alloy Sheet
High Nickel Alloy Coil
High Nickel Alloy Pipe
High Nickel Alloy Tube
High Nickel Alloy Round Bar
High Nickel Alloy Rod
Know More http://www.ashtavinayakaoverseas.in
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
Who We Are
Ares Engineering is the expert in the manufacturing metal decorative wire mesh for architectural application. With the most advanced facility, we have the most modern and productive mill in China. Our products―whether they’re expanded metal mesh, laser cut sheet, perforated sheet or stainless steel decorative wire mesh―seamlessly blend form and function, challenging the status-quo. Through consistent growth and innovation we strive for the highest quality products at an unbeatable value.
As a major manufacturer and supplier of metal mesh products, we are committed to quality. Our investment in personnel and equipment provides you–customers with innovative and value-based products that meet or exceed your design expectations. From concept to completion, our team of experts and 35 years of experience in metal products can help you choose the mesh that suits your needs.
Our People
At Ares engineering, we are extremely proud of our employees and our commitment to them. Everyone is full of enthusiasm, diligence, dedication, and always strive to pursue the highest quality craftsmanship. They are the heart of our company and the reason why we are able to provide you with high-quality metal mesh products.
We have professional sales staff, engineers, designer, mesh worker, painting technical worker, quality inspector, customer service representatives, and all of the creative, inventive individuals here at Ares that continue to push the boundaries of what metal mesh can be.
With a professional team of product advisors, we are able to guide you in product selection. If your product requires design and technical support, we can provide suitable suggestions, alternatively we can provide price information, availability and lead times.
Company Profile
Ares engineering has been the leading manufacturer of metal mesh products. We are well respected in the industry for being trustworthy in quality and service.
Ares was built as DBL Expanded Metal Mesh Factory in 1986, which only produce the expanded metal mesh at first. With time goes by, our founder introduced many advanced equipment and enlarge our production range, including not only stretched mesh machines, but also punching machines, laser cutting machines, cutting machines, and decorative wire mesh machines. Then we renamed the company name as Anping County Huijin Wire Mesh Co., Ltd on 2008. Next year, we started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology.
With the continuous increase of decorative mesh projects, we invested the international-standard PVDF and Powder Coating Painting line, which can control quality well.
On 2019, we set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. The main purpose of the branch establishment is separating projects from traditional businesses, assembling a dedicated project team which can provide solutions and professional service for metal decorative mesh projects.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
History
1986: Built DBL Expanded Metal Mesh Factory
2008: Renamed as Anping County Huijin Wire Mesh Co., Ltd
2009: Started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology
2012: Invested the international-standard PVDF and Powder Coating Painting line
2019 by now: Set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. Focus on providing solutions and supplying products for metal decorative mesh projects.
Our website:http://www.aresmaterial.com
1958-1990 Hebei XINYU Welding Co., Ltd.
1991-2004 DONGGANG Welding Materials Co.,Ltd, which was founded by Hebei University of Technology and Hongkong Community Service Center,mainly produces High antirust CO2 gas-shield welding wire, Submerged arc welding wire, Stainless steel welding wire & Flux-cored welding wire.
- Now Hebei XINYU Welding Co., Ltd, which mainly produces high strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire . Our products are widely applied to the welding of low-alloy high tensile large & key steel structures in coal machinery, construction machinery, petrochemical machinery, pressure vessels or tanks, oil & gas pipelines, military industry, shipbuilding, bridge and high-rise buildings etc. At the same time,we are the only interprise in the domestic which produces welding wire as well as welding wire equipment.
All our products have passed ISO 9001-2015 quality system certification and CE certification because of our advanced production lines, top professional testing equipment, intelligent R&D team and scientific management system. Meanwhile, we get 7 invention patents including a national one. We are a member of China Mechanical Engineering Association and China Welding Association. Other honors are ” Consumer Trusting Products in Hebei province” ” Famous Brand products in Hebei province” ” Good Credit Enterprise in Hebei Province” and “China Key &Leading Enterprise in high tensile steel welding wire”.
Our Welding wires and welding wire equipment are exported to USA, Italy, Brazil, Russia and India etc.
Welcome you to our factory any time.
An ISO 9001:2008 Certified Company, Steel Pipes & Tubes Industries is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by Metline Pipes & Tubes are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes, Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
1. Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
2. Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
3. Square Stainless Steel Pipes, Round Stainless Steel Tubes, Rectangular Stainless Steel Pipes & Tubes
4. Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
5. Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
6. Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
7. LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
8. Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
9. ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
10. Galvanised Pipes as per IS:1239/I
11. Square and Rectangular Steel Pipes as per IS: 4923
12. ERW Boiler Tubes: BS 3059, ASTM A 214
13. Air Pre Heater Tubes to BS: 6323 PART V
14. Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
15. Seamless Heat Exchanger Tubes ASTM A 179
16. CDW TUBES IS: 3074 or BS 980
17. CRCA ERW Tubes to IS 3601 OR IS 3074
18. Stainless Steel Electro polished Pipes Manufacturer/Supplier
19. Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
Radisson Impex are one of the leading manufacturers, suppliers, exporters of high quality stainless steel flanges, high nickel alloy flanges, inconel flanges suppliers, monel, hastelloy, alloy 20, monel 400 flanges suppliers, titanium alloy, copper nickel flanges, nickel 200 flanges manufacturer, duplex and super duplex steel, hastelloy c276 flanges manufacturers, alloy steel, inconel 600 flanges manufacturer, carbon steel flanges in Mumbai, India. Flanges Manufacturers in India, Flanges Supplier in India
Our Products
Nickel 200 Flanges
Inconel 600 Flanges
Inconel 625 Flanges
Incoloy 800 Flanges
Incoloy 825 Flanges
Hastelloy C276 Flanges
Hastelloy C222 Flanges
Monel 400 Flanges
Titanium Gr2 Flanges
Titanium Gr5 Flanges
Alloy 20 Flanges
SMO 254 Flanges
Stainless Steel 304 Flanges
Stainless Steel 304L Flanges
Stainless Steel 316 Flanges
Stainless Steel 316L Flanges
Stainless Steel 310 Flanges
Stainless Steel 321 Flanges
Stainless Steel 904L Flanges
Alloy Steel Flanges
Alloy Steel F1 Flanges
Alloy Steel F5 Flanges
Alloy Steel F11 Flanges
Alloy Steel F91 Flanges
Duplex 2205 Flanges
Super Duplex 2507 Flanges
Carbon Steel Flanges
Copper Nickel Flanges
more info please visit us http://www.radissonimpex.com
Offering a reliable way to connect pipe systems with the various equipment, valves, and other components of virtually any processing system, flanges are the second most used joining method after welding. Using flanges adds flexibility when maintaining piping systems by allowing for easier disassembly and improved access to system components.
A typical flanged connection is comprised of three parts: Pipe Flanges, Gasket and Bolting
In most cases, there are specific gasket and bolting materials made from the same, or approved materials as the piping components you wish to connect. Stainless Steel flanges are some of the most common. However, flanges are available in a wide range of materials so matching them with your needs is essential. Other common flange materials include Monel, Inconel, Chrome Moly, and many others depending on the application. The best option for your needs will depend on both the system in which you intend to use the flange and your specific requirements.
Flanges are not a one-type-fits-all sort of solution. Sizing aside, matching the ideal flange design to your piping system and intended usage will help to ensure reliable operation, a long service life, and optimal pricing. Here’s a look at the most common flange types available.
THREADED FLANGES
Also known as a screwed flange, this style has a thread inside the flange bore which fits with the matching male thread on the pipe or fitting. The threaded connection means you can avoid welding in many use cases. Simply match the threading to the pipes you wish to connect.
SOCKET-WELD FLANGES
Ideal for smaller pipe diameters in low-temperature and low-pressure scenarios, socket-weld flanges feature a connection in which you place the pipe into the flange and then secure the connection with a single multi-pass fillet weld. This makes this style simpler to install than other welded flange types while avoiding the limitations associated with threaded ends.
Slip-on flanges are very common and are available in a large range of sizes to accommodate systems with higher flow rates and throughput. Simply match the flange to the outer diameter of the pipe you intend to connect. Installation is slightly more technical as you’ll need fillet weld both sides to secure the flange to the pipe.
LAP JOINT FLANGES
Featuring a two-piece design, lap joint flanges require butt welding of the stub end to the pipe or fitting with the use of a backing flange to create the flanged connection. This design makes this style popular for use in systems with limited physical space or systems which require frequent dismantling and maintenance.
Like lap joint flanges, weld neck flanges require butt welding for installation. However, their integrity, performance in systems with multiple repeat bends, and the ability to use them in high-pressure and high-temperature systems make them a leading choice for process piping.
Used for terminating or isolating piping systems, blind flanges are essentially boltable blank discs. When installed properly and combined with the correct gaskets, they can achieve an outstanding seal which is easy to remove when needed.
SPECIALTY FLANGES
The flange types listed above are the most common. However, there is a range of additional specialized flange types available to suit a range of uses and environments. Other options include nipoflanges, weldoflanges, expanding flanges, orifice, long weld neck, forged flange, big size flange, high pressure flange and reducing flanges.
Versatile Overseas Is An ISO 9001:2015 Certified Company And Has A Track Record Of Offering A Wide Range Of Piping Solution At Very Competitive Prices. In A Very Short Period Of Time, We Have Gained An Excellent National And International Reputation.
About AH Magnet
AH Magnet is an ISO9001 accredited Chinese manufacturer/Chinese supplier of all kinds of high performance permanent magnets products with over 30 years of experience in the field. Our headquarter is located in Anhui Province and we have two active sintered neodymium iron boron magnets factories in Anhui and Zhejiang China covering a combined area of 80,000 square meters.
We offer a wide variety of neodymium magnets to choose from such as N, M, H, SH, UH, AH and EH grades, and have a wide variety of applications, from servo motors, stepper motors, brushless motors to permanent magnet synchronous motors. We also customized magnets assemblies according to the customers’ design requirements, such as magnetic coupling, laminated magnet, Halbach array, magnetic motor parts and so on. Our rich cooperative experience and professional R&D ensures that we always keep the same pace with customers and industrial innovation.
As an experienced NdFeB magnets manufacturer, we are committed to serving our customers in the following ways:
Ensuring high performance products
Ensuring timely product delivery
Ensuring flexibility by tailoring products according to our customers’ needs
Ensuring that our prices are competitive
Our Company is committed in our duty to the environment and in our social responsibilities. In the past decade, we have offered environmentally friendly permanent magnets and assemblies to our customers. We also recycle all our inhouse wastes. We are also committed to providing a better environment to our factory workers and making substantial donations regularly to impoverished mountainous area.
It is the vision of our all staves that our Company will stand strong for many more decades to come.
Established in 1996, Vintex Steel & Engg. Co. has gained immense expertise in supplying & trading of Stainless steel, carbon steel, ferrous metal etc. The supplier company is located in Mumbai, Maharashtra and is one of the leading sellers of listed products. Buy Stainless steel, carbon steel, ferrous metal in bulk from us for the best quality products and service.
Shijiazhuang Jintai Purification Equipment Co., Ltd was founded in 1994 (reformed from a state-owned enterprise to a private limited liability company in 2004), located at No.69, Tiangui Street, High-Tech Zone, Shijiazhuang , Hebei Province.
The company has been committed to the development of metal porous materials and related technologies and applications. As early as more than 20 years ago, Jintai began to focus on the development and production of metal porous powder sintered filter elements. It has 15 invention patents and utility model patents. It has been a high-tech enterprise and has passed ISO9001 quality management system certification. After more than 20 years of technical accumulation, Jintai can now provide customers with a variety of product materials and specifications to meet customer needs.
The company’s business covers all provinces in China, and some products are exported to Germany, Italy, Spain, India, Taiwan and other places. Some large domestic companies have designated the company’s products. The company’s products mainly include titanium filter, stainless steel filter, sparger, filter, filter device and system, sheet and disc, saucer-shaped filter disc, aeration ring and so on. Products are widely used in medicine, metallurgy, petroleum and petrochemical, fine chemicals, food and beverage, air purification, electronics industry, textile industry, water treatment and other fields.
Buy low price, high quality butterfly control valve, choose our products, Liwei Valve is the leading factory. Warmly welcome new and old customers to visit!
Cefa Metal was established in 2011. Our company has a factory that has been operating in the domestic market for years mainly engaged in steel grating, iron wire, wirefence and other products. In 2018, we decided to build our export department in Shijiazhuang City, Hebei, China. We are committed to offering stable supply for customers with competitive price, reliable quality and complete solution for your business.
Anping County Anlida Metal Wire Mesh Co., Ltd. was founded in 2001 in July and was formally established company in 2006. Which is located in Anping County, Hengshui City, Hebei Province, next to the da guang express way. It is “the quality standard of qualified enterprises” Hebei ProvinceChina construction metal doors and Windows, curtain wall industry “innovative enterprise”, the national federation of industry and commerce hardware mechanical and electronic chamber of commerce building metal doors and Windows, curtain wall) committee “vice President of units, commodity wholesale market in the development of China market society committee” merchants nationwide credit management model “, “member of” China hardware products association.
Our products:Expanded Metal Mesh,Aluminum Metal Mesh,Perforated Metal Sheet,Grating,Wire Mesh, etc.
The development direction of the company has a perfect IS09001 international quality management system, and has a group of senior team full of enthusiasm, including experienced, technical comprehensive, excellently engineer, technician team. They constitute the company’s a strong backing.
The company has also quality control in production process and a full range of testing test equipment, which makes that the quality of products can be guaranteed for a long time .We sincerely thank the customers who have given us support and love over the years. We hope to get your continued support, as always, we will provide you with the best quality products and services.
CRS is a leading manufacturer of thermit welding materials in China, we have more than 30 years experience of designing thermit welding to the rails. Focusing on rail welding used for railroad, metro, tram, crane rails, turnel construction and maintenance.
We have production area of 2500 square meter, with fully automated batching system, sand mould automatic production & drying machines, equipped with full range of raw materials and welding joint testing equipments. Rail aluminum thermit welding material has been promoted and well applied in the railway lines such as the Beijing-Shanghai high-speed railway line, Jinqin passenger line, Daqin line, Tong-Rang line and Tong-huo line. Materials have been exporting to Australia, Indonesia and other countries many years, the products have won praise.
CRS possesses a qualified team of technicians and engineers who have been improving the quality and performance of products, Certified to the ISO9001:2000 standard, CRS’ welding products have been supplied to a wide range of customers worldwide. Thermit products have been passed Chinese rail welding standard TB/T1632-2005 test, Railway Ministry of China, as well as Australia standard AS1085.15-1995 test, Indonesia welding joint inspection test, Taiwan SGS quality inspection test. We are ready to provide technical & operation training, qualification and certificate for customers to ensure a standardized quality and performance of the welding products.
Our factory is an enterprise manufacturing pipe fittings for more than 30 years. It is supplying Malleable iron fittings, Ductile iron fittings , Gray iron fittings and other steel products, with long history and unchanging faith of producing high quality products.
Main products：Malleable iron pipe fittings, Tube clamps, Air hose couplings, Camlock couplings, Carbon steel pipe nipples, Electric power fittings, Steam couplings, Gas meter connectors etc.
- Founded in 1986, Covering 12,000 square meters, having more than 200 workers. We have a registered capital of 8.88 million, and the annual export volume of 10 million USD.
- As a high-tech enterprise, we have our own R&D team, which can open molds through samples or drawings provided by customers, and even assist customers in developing new products through functional descriptions.
- From purchasing material, casting, annealing, trimming, galvanizing, machining, packing, to exporting, have formed stop production system.
- Various casting techniques: Currently 90% of the products have been changed to coated sand production. And equipped with coated sand production line, which can control the quality requirements of coated sand, and coated sand buried box casting line, further improve the quality of products. Most suitable casting way can be defined according to any products.
- casting surface: our own researched prescription of sand and mold design is used, there’s no joint line, no shift, no sand inclusion, no crack on products, we will satisfy every client.
- Material assurance: on –the –spot sample analysis+ chemical composition analysis after casting, double tests to guarantee stability of material. Electric heating automatic temperature control equipment can precisely control the furnace heats uniformly to ensure product are with the same tenacity.
- Surface treatment: self-color + rust preventing oil, electroplating, hot dip galvanizing, first electroplating and then hot dip galvanizing, first electroplating and then backed galvanizing, first electroplating and then plastic spraying. Different products need different surface treatment, best surface treatment can be defined according to different products.
- Machining technique: we have professional threading machines and CNC lathes to make threads, threads are 100% within specified scope of gauge and plug gauge, included angle of threads is within 90°+-0.5°. High efficiency and high quality producing way make our products have more market value.
- Our certificates: Our factory passed TSE for Turkey, INMETRO for Brazil, and CE, ISO9001:2008, IQNET etc.
- Our clients: Our factory is cooperating with many well-known enterprises, main market for malleable iron pipe fittings is Europe, main market for pipe clamp fittings is U.K., and main market for air hose couplings is USA. There’re also many different kinds of products for specialized application, and are very advantageous in their fields.
Our website:http://www.donghuancast.com