A well screen is a filter device used as the suction portion of a well constructed in a loose or semi-consolidated aquifer. The screen allows water to enter the well from the saturated aquifer, prevents sediment from entering the well, and acts structurally as a support for the aquifer material. When considering well efficiency and the logarithmic cost to the well owner, the importance of having the right screen cannot be overemphasized.
The sieve is resistant to corrosion because it comes into contact with water. In addition, it has high strength and can keep the surrounding structure intact. The openings of the sieve can be small enough to block the large amount of formation around them. The flow of water through the screen will be uniform.
Well screens are recommended for all environmental drilling operations. It helps extend the life of the well and keeps the flow of water unrestricted. Sand and fine powder sand, these fine particles can be filtered out before there is water. Well screens help remove most of this fine material from well water.
Well screens are made from a variety of materials, ranging from rough-hewed hand designs to machine built high-efficiency and long-life models. The value of the screen depends on how much it contributes to the success of the well.
Standard:
- Large open Spaces
- Do not block the slot
- 3.corrosion resistance
- Sufficient column and collapse strength
Functions:
- Easy to develop
- Minimal scaling tendency
- Low head loss through the screen
- Control sand pumping of all types of aquifers
Slot size selection is a critical step to ensure maximum well performance. The screen is usually designed to block 50% of the stratum, and the entry speed for the screen should not exceed 1/10 or 0.1 ft per second. The velocity is calculated by dividing the well production in GPM by the screen open area in square inches.
The gap size of the screen is based on dimensional analysis of the formation sample. After analyzing the composition size of grain in the sample, grain size distribution curve
I can draw it. Several methods can be used to obtain the allocation of information about grain size. The most widely used method is to pass the material through a stacked set of brass or stainless steel sieves. During the screening process, each sieve removes a certain percentage of the whole sample; The best materials are collected in the chassis. Screening analysis not only provides the basis for determining slot sizes, but also other factors that influence screening well design.
Hebei Yeyuan Construction Engineering Co., Ltd. is a professional import and export company,
Our company mainly sells wire mesh and fence products. Wire mesh products include stainless steel wire mesh, copper wire mesh, welded wire mesh, gabion basket, hexagonal wire mesh,layer chicken cages, expanded metal mesh, window screen, black woven wire mesh, steel grating ,concertina wire, Barbed wire, etc. The fence products including anti clamp fence,chain link fence,defensive barrier,palisade fence,airport fence,spike fence,roll top fence,double wire fence,temporary fence,crowd barrier,wire mesh panel etc.
The company has independent import and export management rights and a complete customs clearance system such as China’s electronic port to ensure the smooth flow of domestic and foreign distribution! Ensure that customers who urgently need to transfer goods from abroad get the goods in the shortest time.
Facing foreign countries, our company’s products are mainly sold to South Korea, Japan, Chile, Argentina, Brazil, the United States, Turkey, the Philippines, Australia, India and many other countries and regions. Over the years, our company has won the trust and favor of our customers with high-quality products, first-class service,so that our wire mesh and fence products are spread all over the country and overseas! Thanks to the support of new and old customers, Yeyuan Company will work harder and enterprising, and give back to customers with better and more efficient services!
We have an experienced technical consulting agency,in order for you to make the right choice of wire mesh and fence, we have established a marketing team with first-class efficiency and first-class service!
Strong technical force, high quality and first-class marketing and after-sales service are your best choice!
——————Welcome to choose Hebei Yeyuan Construction Engineering Co., Ltd
PRODUCTS DESCRIPTION
Gabions are rectangular cages made of hexagonal double-twist wire mesh filled with appropriately sized rock or quarry stone. Gabions are used in many situations including the stabilization of earth movement and erosion, river control, reservoirs, canal refurbishment, landscaping and retaining walls.Gabions are compartmentalized rectangular containers of galvanized steel hexagonal wire mesh that are filled with stone. While maintaining sufficient strength to contain the stone used as a fill, gabions must be able to settle, twist, and conform to channel and foundation shifts.
In order to meet the various needs, gabions must have the following features:
· Hexagonal mesh pattern critical points
· Double twist to avoid unraveling
· Reinforcing wires woven into corners to reinforce critical points
· A diaphragm securely attached at the base that will prevent the shifting of some and reinforce the gabion.
https://www.xhgabions.com/products/
Certification:
- All gabion basket are manufactured in accordance with the requirements of BS EN 10223-3:2013.
- All wire is in accordance with BS EN 10218-2:2012 and BS EN 10223-3:2013
with an ultimate tensile strength of between 350 to 500N/mm².
- All wire used in the gabion production or accessories shall be Zinc or Zinc 90% Aluminium 10% coated in accordance with BS EN 10244-2:2009 (Class A) with an additional extruded organic polymer powder coating (grey,green) of 0.5mm nominal radial thickness. This organic polymer powder coating is in accordance with BS EN 10245-2:2011.
Expanded metal, also known as metal mesh, refers to any type of metal raw material that can expand in response to different climate changes. This expansion capability makes it ideal for many functions, and it also helps reduce wear on components made with this metal structure. Expanded metal can be used to make many different types of objects, including metal grinders, wall art, furniture and other objects, where the ability to cope with climate change helps protect the integrity of the finished product.
One of the most common examples of such metal products is expanded metal sheets. These sheets can be scored and peeled to create perforation designs, which can then be used to create many different metal products. This method can be used to create mesh designs and is often found in outdoor furniture made entirely or partially of metal parts. The same technique can also be used to create large panels for use as wall art, room dividers, and metal products with similar functionality and decoration. Although expanded metal can expand and contract when exposed to different weather conditions, it is very durable and very suitable for use in many different products.
Expanded metals can also be used to increase the strength of many construction projects. By including metal sheets or even metal strips in the masonry work, it can help maintain the integrity of the masonry over a long period of time. The same method can be used to provide additional strength to plaster and other types of concrete structures. When used to create perforated or diamond-shaped grids, expanded metal can be effectively used to create cages or other enclosures, ideal for everything from animal kennel spaces to storage areas for holding various supplies. One of the advantages of constructing these types of enclosures with expanded metal is that it allows air to circulate freely and improves visibility.
Today, many other applications for metal expansion are also adopted. This includes creating expanded metal fencing that are both decorative and durable. The metal can be used to make grills suitable for outdoor use and various forms of indoor cooking equipment. Many companies use expanded metal to create a variety of products that can be used by individual consumers and business operations, making this metal one of the most widely used material categories today.
Shri Dashmesh Castings is dedicated to manufacturing Rolls for Flour milling, Solid chill rolls, Adamite & other types of rolls.Shri Dashmesh Castings is located in the green, unpolluted environs in the heart of the industrial area of Malerkotla .
Shri Dashmesh Castingshas established itself as a trustworthy name in the manufacturing of chilled cast iron rolls (mill rolls) by the centrifugal spin casting process using the double pour technique. The process has been innovated by professionals having immense experience in developing rolls of highest quality standards, at its own manufacturing facilities & by satisfying customers from all over the world.
Exporter, supplier and manufacturer of stainless steel fasteners, industrial stainless steel fasteners, steel bolts, steel nuts, steel washers,
Steel grating is generally made of carbon steel, and the surface is hot-dip galvanized, which can prevent oxidation. It can also be made of stainless steel, and the steel grating has the properties of ventilation, lighting, heat dissipation, anti-skid, explosion-proof and so on.
Steel grating is a kind of steel product with square lattice in the middle, which is cross-arranged with flat steel according to a certain spacing and horizontal bars, and welded by pressure welding machine or manually. Steel grating is mainly used as gutter cover. , steel structure platform plate, steel ladder step plate, etc., the cross bar is generally made of twisted square steel.
Advantages of steel grating fence
Material saving: the most material saving method under the same load conditions, correspondingly, the material of the supporting structure can be reduced;
Reduce investment: save material, save labor, save construction period, free of cleaning and maintenance;
Simple construction: on the pre-installed support, it is fixed with bolts or welding, and it can be completed by one person;
Save construction period: the product does not need to be reprocessed on site, and the installation is very fast;
Durable: It has been hot-dip galvanized anti-corrosion treatment before leaving the factory, and has strong impact and heavy pressure resistance;
Modern style: beautiful appearance, standardized design, ventilation and light transmission, giving people an overall smooth modern feeling;
Lightweight structure: less material, light structure, and easy to hoist;
Reduce wind resistance: due to good ventilation, the wind resistance is small in case of strong wind, reducing wind damage;
Anti-contamination: no rain, snow and dust;
Other advantages: ventilation, lighting, heat dissipation, explosion-proof, good anti-skid performance;
Simple design: no need for small support beams, simple structure and simplified design
Acid and alkali corrosion ability: in the range of PH 6 to PH 12.5, a stable protective film is formed on the surface of the zinc layer, and the corrosion resistance is good.
Steel grating use
Steel grating is suitable for alloys, building materials, power stations, boilers, shipbuilding, petrochemical, chemical and general industrial plants, municipal construction and other industries. It has the advantages of ventilation and light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy to clean and easy to install.
Steel grating has been widely used in all walks of life at home and abroad, mainly used as industrial platforms, ladder treads, handrails, passage floors, railway bridge sideways, high-altitude tower platforms, drain covers, well covers, road grilles, three-dimensional It can also be used as a fence for parking lots, institutions, schools, factories, enterprises, sports fields, and garden villas.
There is a well known company in the wealthyJiangsuProvince- DongTai QB Stainless Steel Co..Ltd. TheProduces of QB is famous in standard Stainless Steel manufacturing industry.
The company locates in Qindong Town Dongtai city which is famous for zhe product of zhe Stainless SteelStand Unit and Component.QindongTownis a most potential developed place in zhe Chang Jiang EconomicRegion, which is richly endowed by nature condition and convenient transportation. The company is a sparklingPearl in the town and is built on the foundation of QB Fasteners Factory, Dongtai. It is a private EnterpriseCombined with product Researching, Developing, Producing and Distributing. The Product includes StainlessSteel Null, Screw, Thread Rod, Valve, Flange, Pipeline, Corrugated Pipe and Standard Unit. The CompanyOccupies an area of 780, 0*0 m2, in which the construction area is 316, 0*0 m2. The number of employeesIs more than 500, and the machine is over 200 sets. The company is successively awarded a lot, such as theWell known Trade Mark of Yancheng City, High Quality Product of Jiangsu. AAAA Unit BrandEnterprise, andNational High Quality Enterprise etc. January 2014 my company`s trademark TNE was identified as A Well-Known Trademark byChinatrab.
The factory processing line including the raw material purchasing, melting, hot-rolling, pressing and finishMachining. All of these processes are monitored and managed strictly according to the international StandardSystem. Along with modem production machining. The advanced physical & chemical inspection. And powerfulScientific research force, this gives a guarantee tu the products. The High-quality products & great after-saleService have won the clients favor.The products sale well in the mainland and 75% of the markets are in many foreign countries such asJapan,Europe, USA, South Korea, Singapore, Malaysia, Australia, UAE(The United Arab Emirates) and other 20Different countries. In order to meet the needs of the customers with the high quality production. We haveScientific test and reasonable management & inspection according to the advanced international level. Our& component which according to the drawing. The main material are made by ourselves. Purchased formDomestic big steel company or imported from foreign company. Material grade are 1CR18NI9TI OCR18NI19OCR18NI10 0CR18NI12MO 02TI 00CR17NI14MO2 OCR25NI20 1CR13 2CR13 3CR13 imported ultra hightemperature steel, ultra cryogenic steel and ordinary stainless steel, grades are: 302 304304L321 316316L374 BB BBM BBC660A660B 2205 2507347 F53 32750 32760 32550 925 S31803 C27617-4925 C-276 625 316S31 316LN 316TI 17-4PH 410 420 42CRMO 35CRMOA 40CR ETC.
From designing, manufacturing and shipping process, each product is in strictly control under the belief“Quality is the life of the company”.With the advanced physical and chemical inspection, we can control thehigh quality and 100% pass rate. The enterprise passed international Quality Certificate such as ISO9001-2000, ISO18000, ISO 14000, OHSAS18001; and special equipment manufacture citification etc. July 21 st2012,QB has passed Military Certification from The General Armament Department of People’s LiberationArmy. November 2013, QB has approved by Material and Equipment Company of Sinopec Group. In April2011, QB also obtained the network qualifications of china Sea Oil Procurement Business System. And we certified ABS and CCS and API&LR Certs, also we acquired an approval of K.S. All of theseHave provided the foundation for the high quality of the Stainless Steel products.
We have all molds of Thailand S expanded metal,the metalmeshcorp gothic mesh hole pattern looks nice and is a good choice for decoration and architecture.The surface finish including powder coated and galvanized,standard sizes 4ftx8ft.
How to Order S Expanded Metal ?.
When ordering or specifying Expanded Metal wholesale , please confirm:
The Style
Flattened or Raised
Material
Sheet Size
Example: Expanded Metal S-18 Flattened,carbon steel, standard 4′ x 8′ sheet.
Features of Standard S expanded metal
Smooth surface. It supplies a safe and smooth surface, which will not hurt people.
Corrosion and rust resistance. Various surface treatment and aluminum, stainless steel materials have outstanding chemical stability.
Lightweight. The Sexpanded metal sheet is lightweight and it can save materials and freight costs.
Easy to install and uninstall. The installation of S expanded metal sheet is easy and no need any special tools.
Application of Hot Dipped Galvanized Expanded Metal Mesh:
Architectural applications include ceiling panels, fencing, partitions, speaker grilles and store displays.
Some decorative applications include interior and exterior design facades, screening, sunshades, building cladding and ceiling and wall lighting.
MeshFiltration Co., Ltd is a subsidiary of Share Group Limited, which was established in 1981. MeshFiltration Products are organized into three categories:
Printing Mesh Series
(Polyester Printing Mesh, Nylon Printing Mesh, Stainless Steel Printing Mesh etc.)
Filter Mesh Series
(Polyester Filter Mesh, Nylon Filter Mesh, Stainless Steel Filter Mesh, Polyethylene Filter Mesh, Polypropylene Filter Mesh etc.)
Stainless Steel Mesh Series
(302, 304, 304L, 316, 316L Stainless Steel Wire Mesh etc.)
We devote to providing all high-quality meshes you request with good price in one place.
Our location:
We are located in Pingqiao Industrial park, Tiantai county, Taizhou city, Zhejiang China. Two and a half hours drive from Hangzhou or Ningbo airport(150km), Four hours drive from Shanghai Pudong airport(360km). Welcome to visit our factory.
Our market:
90% of our products are exported to America, Germany, Japan, Britain, Italy, Russia, Brazil, Turkey, Argentina, Pakistan, Thailand, Singapore, Korea, Mexico, etc.
Our equipment:
Now MeshFiltration owns 90 sets of P7100 and P7150 Sulzer weaving looms from Switzerland, as well as 4 Benninger high speed warping machines, 2 automatic heat setting and water washing machine, advanced examing and testing instrument , and five advanced needle punching production lines. The width of weaving machines: 280cm, 330cm, 360cm, 390cm.
Our QC:
As an ISO9001:2000 certified manufacturer, MeshFIltration supply full range products with complete quality control. See details here.
Our employees:
Workers No. has reached over 300 from previous 20, and 18 technical engineers. And 80 of employees in the office have bachelor degrees.
Our annual output:
With state-of-art technology and advanced production machines, relying on the strategy of talents, MeshFiltration annual output has reached 3 millions of qualified woven fabrics and meshes; 2 millions of needle punched filter felts and 100,000 square meters of woven wire mesh.
MeshFiltration is persistent in pursuing quality of products and satisfaction of customers, and is expecting to establish business relations with customers from home and abroad.
Gerdau S.A. (Gerdau) is a producer of long rolled steel. The Company operates in five segments: Brazil (Brazil Business Operation), which includes the steel operations in Brazil (except special steel) and the metallurgical and coking coal operation in Colombia; North America (North America Business Operation), which includes all North American operations, except Mexico and special steel; Latin America (Latin America Business Operation), which includes all Latin American operations, except the operations in Brazil and the metallurgical and coking coal operations in Colombia; Special Steel (Special Steel Business Operation), which includes the special steel operations in Brazil, Spain, the United States and India, and Iron Ore (Iron Ore Business Operation), which includes the iron ore operations in Brazil. The Company’s mills are located in Argentina, Brazil, Canada, Chile, Colombia, Spain, the United States, Guatemala, India, Mexico, Peru, the Dominican Republic, Uruguay and Venezuela.
Shree Ji Steel Corporation is the leading manufacturer, supplier, trader, importer and exporter. We came into existence way back in the year 1978 as a Sole Proprietorship firm. We have our operational unit at Kolkata, West Bengal, (India). Our arrays of products that are most famous in the market are Iron & Steel and Hardware Goods. Our product range is in extreme demand in the industry due to its unmatched quality and durability. With our competent team, we are able to lay forth an international range of products. To meet the variegated demands of our esteemed customers, we are engaged in export with a number of international nations too. With our flexible payment gateways, prompt deliveries, sheer marketing practices, and customer driven approach, we have acquired a position of prominent market leader. We are committed towards our clients and make them pleased with our qualitative product range.
Our Products include- TMT BAR, MS ANGLE, MS CHANNEL, MS BEAM, MS ROUND BAR, MS SQUARE BAR, MS FLAT, MS PLATE, CHEQUERED PLATE, MS NUT, MS BOLT, BINDING WIRE, WIRE ROD.
Bhawal Steel Agency is a Leading Importers & Exporters of Stainless Steel, Carbon Steel & Alloy Steel Pipes & Tubes, Sheets & Plates, Bar & Wire, Pipe Fitting, Flanges, Nickel Alloy and Non – Ferrous Metals. Bhawal Steel Agency was incorporated by Mr. Mehta and from then onwards a never-ending journey started to reach, satisfy and keep long lasting relationship with our old as well as new clients.
Bhawal Steel Agency is a proactive organisation engaged in supplying of quality products that meet and exceed customers’ specific requirements and thus ensure complete satisfaction. We are primarily engaged in Suppliers, Importers & Exporters of Ferrous & Non-Ferrous Metals
Bhawal Steel Agency has been a professionally managed Importer, stockist and supplier of ferrous and non-ferrous metals. We are capable of providing a vast range of materials, from stock, to suit your needs. We have the experience to solve your most difficult requirements.
Concertina razor wire manufacturer Description:
Model: BTO-22, BTO-28, BTO-30, BTO-60, BTO-65
Brand: YUJUN
Code: 73130000
razor wire grinder supplier Specification:
Color: green, white, red
Size: 200mm, 300mm, 450mm, 500mm, 600mm, 730mm, 960mm, do as requred
Material: galvanized, galvalume, stainless steel
razor barb wire for sale Application
The razor sharp barbed hooks of the razor wire and the small distances between the blades provide an effective protection.
The razor barded wire is both a formidable physical barrier and an excellent psychological deterrent. So it protects from the vandals to vulnerable sites, which like jail, military, airdrome, high security border barrier.
YUJUN barbed wire razor wire Material:
Stainless steel razor wire, galvanized razor wire
Concertina Razor Wire Assortment:
Stainless steel razor barbed wire,
PVC coated razor barbed wire,
Electric galvanized razor barbed wire,
Hot dipped galvanized razor barbed wire.
Stainless steel razor wire Advantages:
- High security
Barbed razor wire with the sharp razor guarantees a high security whilst retaining high quality.
- Long life
Razor wire material of stainless steel or hot-galvanized makes sure for long life and low maintenance.
- Easy installation
Short sections needed for urgent security can be installed extremely fast and with little equipment, allowing repairs to be carried out without compromising perimeter security.
More information about Yujun via https://www.sinorazorwire.com/
Founded in 1993, focused on the steel domain, Concast is a cross-sector leader with customer-focus, global quality standards as its key mandate. From being a pioneer in branding TMT Bars and occupying a pre-eminent position in the secondary steel sector in India – Concast is emerging as a diversified leader with robust investments of resources in state-of-the-art design & engineering, production, R&D, product testing & validation and top of the line HR practices.
The conception of Concast Group began with global excellence in steel& minerals and was later extended to the sectors of infrastructure and food.
Its manufacturing unitsare ISO 9001:2000 certified; every business is complemented with sound financial depth and apt human resources.
Concast, today, in its annual business of over 2 Billion Dollars and 10,000 employees is a legacy to explore not just growth but sustainable growth via pioneering efforts, customer orientation and integrity.
Sri M.D. Khetan; born on 16th Nov’, 1933 in a small village, Banura, District, Sikar (Rajasthan) and came to Jorhat (Assam) in the year 1948 in search of work. He began his career with service at Jorhat (Assam) as an Accountant and began professional career as a businessman in the year 1959 and started a firm under the name and style of M/s Hightension Electricals, dealing with various Electrical Goods, being encouraged and patronized by buyer’s of wide repute and to implement long cherished desire, (Determination is Stronger than Destiny) decided to start a Manufacturing Unit is SSI level for manufacturing L.T. Distribution conductors and hence laid the foundation of M/s North Eastern Cables & Conductors Pvt. Ltd. as far back in 1986. Gradually started to manufacture overhead transmission AAAC conductors, AAC conductors, ACSR conductors upto 400 KV lines.
Since conductors demanded high approbation from all concerned and encouraged by the buyers from different parts of the country preferably in western India, M.D. Khetan started the second unit at Sikar (Rajasthan) under identical name and style in 1990 and got deemed Export / Export Orders of worth more than 25000.00 lacs upon their strength and performance through out India and abroad. In the same year Khetan group of Industries entered into the field of manufacturing LT PVC Cables of voltage grade 1.1 KV / 3.3 KV and started the unit in the name and style M/s North Eastern Cables (P) Ltd., at Jorhat (Assam). All the products carrying ‘ISI’ Marking and ISO-9001:2000 Quality Certification Mark.
Recently, Khetan group of Industries started few more manufacturing units such as Cigarette manufacturing unit of Jorhat (Assam) under the name and style of M/s Kreesna Industries (I) Pvt. Ltd., franchisee with multinational company M/s. ITC Ltd. (Closed due to withdrawal of notification) in the year 2000 and started Managing for M/s Kothari Products Ltd., “Pan Parag” Group at Jorhat and on contract manufacturer for M/s Khushi Aromatics (“Pan Parag” Group Unit) at Jorhat in the year 2001 after seeing the trend and policies of the market and area, the group tied up with ITC Ltd. again and Manufacturing “ITC Brand” Safety Matches at Jorhat as M/s Shyam Associate in the year 2003. The “Khetan Group” of Companies gives a local employment of around 1000 (approx.) workers directly and atleast 2000 persons indirectly and in the same manner gave a rise to local infrastructure along with subsidiary units. Thus, the Group has developed themselves in all areas which has engraced their abilities. Recently the group has set up a Hotel cum Restaurant at Guwahati “Surya Mahal” having all necessary facilities under one Roof and this only one in North Eastern Region.
Awards
Khetan group of Industries has built up a very good record of accomplishment of performance since its inception and has been continuously on more to improve its performance and to achieve excellence in all the spheres of activities. Both the conductor units were received the “Best Productivity Performance Award” in 1997, conferred by the National Productivity Council of India and the award was handed over to Sri M.D. Khetan by the Hon’ble President of India, Sri K.R. Narayanan on 17.11.97 at the Vigyan Bhawan, New Delhi. Also cable unit M/s. North Eastern Cables (P) Ltd., received the ‘National Award for Outstanding Enterpreneurship’, conferred by the the Ministry of Industry, Govt. of India and the award was handed over to Sri M.D. Khetan by the Hon’ble Vice President of India, Sri Krishankant on 17.04.99 at the Vigyan Bhawan, New Delhi and he was also honoured at “International Rajasthani Conclave” by Chief Minister of Rajasthan Sri Ashok Gehlot & Governor of Rajasthan Sri Anshuman Singh.
Sri M.D. Khetan personally connected with many social organizations of Assam as well as of Rajasthan.
Henan Gang Iron and Steel Co., Ltd is a top agent duly authorized by Wuyang Steel of HBIS (Hebei Iron & Steel Co., Ltd) in China, with rich experience in supplying high-quality medium-thick plates, and super thick & heavy steel plates in stock and in futures.
Besides, gangsteel agent products from other leading mills and provide service for steel processing,
including TISCO (TG), TPCO, ZPSS, WISCO, JISCO, Shougang, Xinyu steel, NISCO, Jinan steel, Xingcheng Mill, etc.
The main steel products consist of 13 series such as: low alloy structure plate, carbon structure plate, alloy structure plate, bridge plate, building structure plate, shipbuilding and oil Platform plate, boiler and pressure vessel plate, mould plate, pipeline plate, armored tank plate, Profile Steel, etc, mainly service for pressure vessel, boilers, destined for Refineries, Petrochemical plants, Oil platforms onshore & offshore, shipbuilding yard, power stations, air cooler, heat exchanger, etc.
Supply specifications of Hot-rolled Plates: THK 5-750 × Width 1500-4500 × Lgth 3000-27000mm
Supply specifications of Cold-rolled Sheets: THK 0.5—4mm × Width 1000-2000 × Lgth / Coil
The Maximum weight per piece can be upto 65MT.
The adopted standard of steel plate: ASTM ASME EN JIS ISO DIN AISI API, and so on.
For shipbuilding plate, we have been approved by ABS LR DNV CCS BV KR NK GL RINA.
We also provide custom-made machining service, involved with cutting, welding, pretreatment, Painting, ball blast, etc.
We have enjoyed a good reputation via our fast ordering procedure, timely delivery, good quality and efficient service.
Sincerely hope new and regular customers to ask us for competitive offers to create smarter procurements solutions for you.
Indalco provide exceptional quality aluminum MIG and TIG products that are engineered to meet the most demanding applications and are backed by industry leading technical support, customer service and delivery. In addition, we have the largest number of third party agency approvals to the best of our knowledge.
Our specialized expertise, integrated technology and spirit of innovation put Indalco® at the forefront of aluminum welding. Indalco®’s unique in-house capability to cast redraw rod enables us to provide the full range of alloys, along with full process control right from the start. The result is a premium quality aluminum consumable that produces a high integrity finished weld.
Take advantage of our technical experts who can provide immediate assistance with optimizing your aluminum welding application, welding procedure certification, research and development and training in aluminum welding. Indalco® is ready to provide the full solution to weld aluminum.
Just like the traditional tiles and mosaics but now in stainless steel. Easy to apply and to combine with other materials. A new option for your most fashionable projects and singular designs.
Our ready-made stainless steel tiles and mosaics allow the same application system as any other traditional material because of their ceramic base. Available in different sizes and in a large range of colors and finishes. The Inox in Color® offers metal tiles and metal mosaics with special finishings. Materials that will let you personalise and distingish your projects providing them with the special touch and personality of stainless steel. Our wide range allows you to choose the most suitable finishing for each application that you project with metal tiles and metal mosaics by The Inox in Color®. Our paving materials can be installed both floors and in vertical claddings, walls… both indoor and outdoor. Stainless Steel tiles and mosaics also fulfill the hardest sanitary requirements in environments like Health Centers, Food Industry, Chemical Industry.