Welded mesh fence likewise called “3D FENCE” “medium-security fencing”. It is an affordable version of steel fence. The panel is bonded with low carbon steel wire. Material Grade: Q195, Surface therapy by Electrostatic polyester powder roaming finishing(Powder-coated) over galvanized products. And after that connect the fencing panels with article by suitable clamps(Clips). Because of its Simple framework, Easy installation and also Beautiful look.More customers regard welded wire mesh security fence as the preferred common protective fence.
Loni ChieFence 3d security fence FEATURES
Lower budget
See-through panel
Anti-rust, Long Service Life
Fast Installation
Customer specs available
Rigidity
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
Bhawal Steel Agency is a Leading Importers & Exporters of Stainless Steel, Carbon Steel & Alloy Steel Pipes & Tubes, Sheets & Plates, Bar & Wire, Pipe Fitting, Flanges, Nickel Alloy and Non – Ferrous Metals. Bhawal Steel Agency was incorporated by Mr. Mehta and from then onwards a never-ending journey started to reach, satisfy and keep long lasting relationship with our old as well as new clients.
Bhawal Steel Agency is a proactive organisation engaged in supplying of quality products that meet and exceed customers’ specific requirements and thus ensure complete satisfaction. We are primarily engaged in Suppliers, Importers & Exporters of Ferrous & Non-Ferrous Metals
Bhawal Steel Agency has been a professionally managed Importer, stockist and supplier of ferrous and non-ferrous metals. We are capable of providing a vast range of materials, from stock, to suit your needs. We have the experience to solve your most difficult requirements.
Cangzhou Spiral Steel Pipe Group (CSSPG) Co., Ltd. is a large-sized, key metallurgic enterprise of Hebei Province in North China. It was formed in 2000 on the basis of Cangzhou Spiral Steel Pipe Co. Ltd, whose history dates back to 1994. CSSPG currently embraces six member companies with products varying from SSAW, LSAW, ERW, seamless steel pipes to 3PE pipes, galvanized pipes, casing pipes, etc. A Joint-stock corporation, CSSPG occupies an area of 600,000 square meters with a total asset of $530 million. It has an annual output of 600,000 tons of spiral steel pipes, 300,000 tons of LSAW, and 200,000 tons of seamless steel pipes. CSSPG has thirteen sets of SSAW pipe production lines, primarily producing double-faced submerged-arc welded pipes of diameters 159-3500mm, wall thickness 5-28mm, and material grades Q235AB Q345 L245 L360 X80 complying with standards of API Spec 5L and most other kinds. The six seamless pipe production lines that it has are capable of making products of diameters 18-920MM and wall thickness 2-80MM meeting such standards as ASTM��API 5L��API 5CT. The LSAW pipes manufactured by its 4 sets of production lines have diameters of 18-1600MM and wall thickness of 2-60mm, which satisfy API Spec 5L standard. In 2000, CSSPG was granted ISO9001 quality management system certificate. The products are widely used in long-distance pipe transmitting of natural gas, petroleum, chemicals, electric power, heat power, water, etc.
Moskovskiy metallurgicheskiy zavod Serp i molot OAO (SiM ST OAO or Serp & Molot Moscow Metallurgical Plant OJSC) is a Russia-based company, which is involved in the steel industry. The Companys main activity is the production of stainless steel products, circles, wires, cables, calibrated steel and others. The Company sells its products on the domestic market, as well as exports them to Belarus and Ukraine.
Danyang City Kaixin Alloy Material Co., Ltd manufactures and sells precision expansion alloy, pure nickel alloy, soft magnetic alloy and high-temperature alloy. Our main products include: Invar36, Super Invar, Kovar, Alloy27, Alloy42, Alloy52, Purmendur 2V, Permalloy, Pure Nickel Alloy (N6), Inconel, Monel, etc. All products are made in accordance with relevant standards and inspected strictly before leaving factory. In accordance to RoHS and ISO9001:2008 standard…..
Shandong Witsteel International Trading Co., Ltd
Located in beautiful seaside city Qingdao, mainly import and export iron ore, carbon steel, stainless steel, alloy steel products such as sheet, coil, plate, round bar, angle steel, channel steel, seamless and welded pipe, fitting and so on.
Witsteel was the subsidiary corporation of Shandong Tianbao Group. Which was established in year 1997. Now become the No. 1 steel trading company in Shandong Province. The top 500 enterprise of China. And we already build very good relationship with many customers from 70 countrys around the word.
Witsteel has excellent international saling team. Have 10 years experience in steel industry. Our siscientific program for customers to save 5%.
We will continue to use our professional and high efficient service to offer our customer more economical soluotion on business.
Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
About 70 years ago there was a smithy in the city of Torhout, West-Flanders, that became the foundation of Koddaert nv. After two generations, Jean-Pierre Heynderick (the current director) joined the company in 1983. Since then Koddaert nv has grown and profiled itself as an international company specializing in non-prime steel products: flat rolled steel, waved steel sheets, profile sheets, merchant bars, steel beams and tubes…
Koddaert operates from an ultra modern facility with top notch machines and advanced means of communication, guaranteeing their products a ‘first class treatment’.
Director Jean-Pierre acknowledges the importance of a thriving team spirit. A healthy team spirit guarantees the growth of Koddaert on the international market. The latest software applications and technical performances ensure an adequate stock management, a perfectly smooth workflow and 100 % customer service. Customers feel that focused dedication…
Vishwa Stainless Pvt Ltd. is fast emerging as a professionally managed manufacturer of stainless steel. Equipped with integrated manufacturing facilities and a credible reputation of delivering premium quality SS products, Vishwa Stainless Pvt. Ltd. has emerged to be one of the leading manufacturers of stainless steel products in India, which include:
• Bright Round Bars
• Hexagonal Bars
• Wires
• Black Bars
• Forged Bars
• Forged Round Bars
All these products come in various grades & specifications.
We have established ourselves in Ahmadabad, the capital of Gujarat and have substantial stock levels of all essential items within our scope of supply and are in a position to offer immediate deliveries. We are currently supplying SS goods to various countries including Australia, Europe, Germany, Italy, Poland, Spain, Netherlands, UAE (United Arab Emirates), Turkey, UK, USA, Canada, Saudi Arabia, etc and it is our endeavour to be the premier supplier of steels around the world. We are a service oriented group. With our focus on Superior Customer Service, Premium Quality and Quick Turnaround we are sure you will agree that Vishwa Stainless Pvt Ltd.is your best source for steel .The foundations of our business continues to be based on quality, reputation, customer service and performance. The highest emphasis is placed on human resources and deployment of the latest in information technology.
Our sound business principles and ethical practices have held us in good stead in our foray into the stainless steel industry. We request you to give us an opportunity to serve your esteemed organization by including us in your approved vendors list.
Anti climb fence is the ultimate security fencing system. The close mesh is used in prisons and other secure facilities as it is virtually impossible to climb. The close mesh also means that the fence is very difficult to cut with anything but power tools.
Friends Steel is a leading steel manufacturing group in India having a wide range of products (TMT Bars, ERW Pipes – Black and Pre-galvanised, MS Angles, MS Flats, MS Rounds, MS Sections, MS Squares, Binding wire). – See more at: http://www.friendsispat.com/#sthash.uK0kGomo.dpuf
As a leading manufacturer of steel products in China, we specialize in galvanized steel strip and coated steel strip, Resin Coated Aluzinc / Zincalume Coils and Prepainted Aluzinc / Galume Coils. Our products are widely utilized in such lines as light industry, roofing, appliance, automobile, architecture, transportation facility, etc.
Huadong Preciosion Machinery Ltd
Tel: 86-150-5848-3249
Fax: 86-574-8834-4288
Email: http://www.hdsheetsteel.com
Website: http://www.hdsheetsteel.com
Shandong Witsteel International Trading Co., Ltd
Located in beautiful seaside city Qingdao, mainly import and export iron ore, carbon steel, stainless steel, alloy steel products such as sheet, coil, plate, round bar, angle steel, channel steel, seamless and welded pipe, fitting and so on.
Witsteel was the subsidiary corporation of Shandong Tianbao Group. Which was established in year 1997. Now become the No. 1 steel trading company in Shandong Province. The top 500 enterprise of China. And we already build very good relationship with many customers from 70 countrys around the word.
Witsteel has excellent international saling team. Have 10 years experience in steel industry. Our siscientific program for customers to save 5%.
We will continue to use our professional and high efficient service to offer our customer more economical soluotion on business.
Steel grating fence, also known as welded steel grating fence, is the most durable metal grating product. They are made of mild steel. We provide complete solutions for steel grille, pressure lock grille, heavy-duty grille, steel stair treads, wooden board grille, safety grille, trench cover, etc. All gratings are very rugged and suitable for all bearing applications. And all lenticular products are completely recyclable.
Steel grating fence is made by welding with flat steel and bars with certain distances. It goes through cutting, opening, edging and other processes. The products enjoy the feature of high strength, light structure, high bearing, convenience for loading and other properties. The hot dipped zinc coating gives the product excellent anti-corrosion.
The Grating Fence can be customized according to the unique design of a specific building project, and can contain characteristic columns. The integrity of the fused grating material allows it to be cut to Grating Fence of individual shapes, such as bows or wavy tops.
Material specifications
Material: high quality low carbon steel, stainless steel 304 or 316.
Types: plain bar as standard.
Finishes: electric galvanized, hot dipped galvanized, powder coated, according to the difference surface treatment.
Woven Wire Mesh BZ-S001
Material: stainless steel & brass/copper/stainless steel/aluminum
Flexibility: Not flexible
Maximum width: 2.5m
Weight: 7.3kg/m2
Open space: 43%
Surface treatment: PVDF spray paint/PVC coating/electroplating
Stainless Steel Woven Wire Mesh China Detailed instructions
Shade Series BZ woven mesh panels are made of wire or flat steel and the appearance of the mesh is usually rectangular. SHADE series products can adjust the temperature of a building by changing the opening rate and transmission of the mesh. The product can help reduce the energy consumption of buildings and is purchased using different sizes of wire and opening sizes, with a wide range of mesh specifications and appearance. Shade series mesh can be installed as a large area of the facade or used on small areas such as window, partition or handrail filling.
Decorative woven wire mesh wholesale A rainbow of colors
In order to provide customers with more color options, Bzwiremesh can use different processes to make the mesh more colorful.
Bzwiremesh uses paint, fluorocarbon coating, PVC coating or an electroplating process to color the mesh. The usual colors used are gold, champagne, silver, bronze, etc. Color selection can also be made according to the color table provided by the customer.
Bzwiremesh can also produce nets made of brass, copper and other materials with natural colors. By adding brass wire to the BZ stainless steel mesh, the mesh will become a new material.