Aleacion Tubos is manufacturer, supplier & exporter of alloy steel pipes, carbon steel pipes, flanges & pipe fittings. we also supply all types of flanges like slip on flanges, blind flanges, weld neck flanges etc
Somos fabricantes, exportadores y proveedores de acero dúplex y súper dúplex, acero inoxidable, acero aleado, acero al carbono, aleaciones con alto contenido de níquel como Monel, Inconel, Hastelloy y aleaciones de cuproníquel en diversas formas, como accesorios de tubería, bridas, sujetadores y accesorios forjados.
Are you looking for scaffolding products or manufacturers?EK scaffolding is the scaffolding manufacturer and supplier in China. We can provide you all types of scaffolding products, such as scaffolding couplers, scaffolding system, cuplock scaffolding, ringlock scaffolding, base jack, etc.
Eastern Steel Manufacturing Co.,Ltd is a leading manufacturer and distributor of seamless steel pipe, welded steel pipe, OCTG products and fittings. We supply first-step processing, semi-finished parts and finished parts to help our clients meet fabrication requirements beyond their capacity or to improve operations by moving forward the pre-production processing.
LANDYOUNG GRP cable tray is a composite material profile made of E-glassfiber, polyester resin or vinyl resin or epoxy resin or phenolic resin, flame retardant by pultrusion process or SMC process.
DESCRIPTIONS
LANDYOUNG GRP cable tray is a composite material profile made of E-glassfiber, polyester resin or vinyl resin or epoxy resin or phenolic resin, flame retardant by pultrusion process or SMC process.
Application
Due to the low thermal conductivity of the selected materials and the addition of flame retardants, the product not only has fire resistance, heat insulation, self-extinguishing properties, but also high corrosion resistance, but also has light structure, aging resistance, safety and reliability. And other advantages, it can be conveniently used in conjunction with metal bridge frames and used in strong corrosive environments such as chemical industry, metallurgy, and petroleum.
Advantages and features
- GRP cable tray is suitable for the laying of power cables with voltages below 10 kV, as well as control cables, lighting wiring, pneumatic and hydraulic pipe cables, and other indoor and outdoor overhead cable trenches and tunnels.
- FRP cable tray has the characteristics of wide application, high strength, light weight, reasonable structure, low cost, long life, strong corrosion resistance, simple construction, flexible wiring, standard installation, and beautiful appearance. Expansion cables, maintenance and repair are all convenient. The installation FRP cable tray can be adapted to local conditions.
- FRP cable tray can be installed overhead with process pipelines; slabs and beams are hoisted; indoor and outdoor walls, column walls, tunnels, and cable trench walls are side-mounted, and can also be installed on open-air columns or piers. When hoisting large multi-layer bridges, I-steel columns should be laid symmetrically on both sides as far as possible. FRP cable tray can be laid horizontally and vertically, and can be cornered, T-shaped, and cross-shaped branches; adjustable width, height, and diameter.
Specifications and types
FRP Ladder cable tray
Ladder Cable Tray systems consists of two longitudinal side members connected by individual transverse members, and is designed for use as a power cable or control cable support system
FRP cable trunking
It is a full-closed cable trays, which is applied to the laying of cables, telecommunications cables, thermocouple cables and other highly sensitive system of control cables.
FRP tray type cable tray
It is a structure consisting of bottom (ventilated or solid) with the longitudinal siderails.
If you are interested in our products, please visit our website
LANDYOUNG GRP pipe is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines.
DESCRIPTIONS
LANDYOUNG GRP pipe is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines.
Helical FILAMENT winding process(Bell and spiogot joints)
GRP Pipe is manufactured using the helical (reciprocal) filament winding process by which impregnated glass fiber reinforcement with resin are applied onto a precision steel mandrel in a prescribed pattern. Repeated application of wetted fibers results in a multi-layered structural wall construction of the required thickness.
Continuous FILAMENT winding process(Coupling joints)
GRP Pipe is manufactured on a continuous filament winding machine. This machine consists of a mandrel composed of a helical wound continuous steel band, supported by beams forming a cylindrical shape. As the formed mandrel turns creating a multi-layered structural wall of the required thickness.
Applications
- Infrastructure &Municipal
- Industrial
- Water Diversion
- Desalination
- PowerPlant
- Petrochemicals
- Oil & Gas and Marine
- Agriculture Irrigation
- Storm Water
- Cooling Water
- Hydropower penstock
Advantages
Minimum 50 years service life
LANDYOUNG GRP pıpes are manufactured with corrosion resistant non-metallic raw materials. Since corrosion is not a problem, cathodic protection and extra insulation against corrosion are not needed; thus operational expenses and difficulties do not exist.
Light weight
Weight of GRP pipe:1/4 of steel pipes; 1/10 of concrete pipes
Can be transported as nested, providing great savings
Quick and easy installation, no need for heavy and expensive equipment
Excellent hydraulic properties
Hazen Williams flow coefficient is 150(c=150). Due to the low friction losses, less pumping energy is required.compared to steel and concrete pipes, same flow rates can be ensured using smaller diameters.
No lime or deposit formation inside
Unlimited service area-application in every environment
Can be installed underground, aboveground, and also underwater.
Bell and spigot joints and coupling joints ensure total leak-tightness.
Flexible:successful experience in earthquake regions
Can be installed inside old lines for relining.
LANDYOUNG GRP pipes are environmentally friend
If you are interested in our products, please visit our website
Product Range and properties
LANDYOUNG offers a wide product range of GRP pipes and fittings to meet Specific requirements of any project. | ||||||||||
|
||||||||||
I
Wir, Fittings und Flansche ist einer der führenden Hersteller Lieferanten und Exporteure von Edelstahl, Kohlenstoffstahl, legiertem Stahl, Duplex-Stahl, Hoch-Nickel-Legierung Stumpfschweißverschraubungen, Flansche, geschmiedete Armaturen, Bleche, Platten, Spulen, Rundstangen, Stangen , Rohre, Rohre, Auslaufarmaturen in Deutschland.
At Aarti Steels Limited, we represent a fully integrated steel manufacturing company with state of art plants located in Punjab and Orissa with an total installed capacity of 3 lakh tonne per annum and 90 MW of Power.
We manufacture total range of Carbon, Alloy and Special Steels conforming to National / International Specifications including customer specific requirements through a dedicated route of steel making i.e. Electric Arc Furnace – Secondary Refining – Vacuum Degassing Route – Con-cast with Electro Magnetic Stirring / Snorkle Casting practices.
Our products hold a formidable status in “Alloy Steel” Industry which is a result of consistency in quality and excellent metallurgical services rendered including after sales service. Our product basket comprises of LONG PRODUCTS with configuration – Rounds, Round Corner Squares (RCS), Wire Rods, Wires whilst we do roll sections in Flats for two wheeler industry and for laminated springs in conventional sizes.
By the dint of adequate representation in “Automotive” Sector of Indian economy, our products are consumed for manufacturing of critical components like Stub Axles, Crank Shafts, Connecting Rods, Crown Wheels, Pinions etc. (to name a few).
To be precise, the steel manufacturing exercise which is quality driven is a perfect blend of Man, Process and Technology.
Amanat Steels Pvt. Ltd. was incorporated in year 2009 and is known as a reputed manufacturer and exporter of quality Fittings, Bends, Outlets and Flanges in Stainless Steel, Duplex Steel, Cu-NI, Nickel Alloy, Alloy Steel and Carbon Steel. Our product range includes Copper Nickel Outlets, Monel Outlets, Nickel Outlets, Inconel Outlets, Hastelloy Outlets, Titanium Outlets, Copper Nickel Flanges, Monel Flanges, Inconel Flanges, Hastelloy Flanges, Titanium Flanges and New Items.
Ambhe Ferro Metal Processors Private Limited is a trusted name in the steel industry in the manufacturing and trading field for the past 27 years. We are engaged in the manufacture, import, export and trading of steel. We cater to major companies in the Engineering, Construction, Capital Goods and other sectors. We have a rich experience in manufacturing, marketing, trading, providing technical services, etc. in the long steel products category where we have developed lots of expertise. Our clients value our Integrity, Customer Focus, Quality of Products and Excellence of Service. We believe in long term relationship with our clients.
We manufacture products such as Steel Rounds, Squares, Hexagons, RCS and Cold Drawn Bright Bars of various grades such as Mild Steel, Carbon Steel, Alloy Steel, Stainless Steels and other grades.
The ANGELO ZANI & C. was founded in 1939 by brothers Angelo and Argante Zani, it appears to be the trading company of Emilia Romagna that the most time working in the engineering sector in the range of special steels and irons drawn. Founded in 1939 in Viale Pietramellara in Bologna in 1953 moves offices and warehouse in Via Malvasia and in 1972 moved to its present location in Via dell’Arcoveggio 72 (Exit 6 bypass Bo), which proved later commercially strategic point in the map of Bologna. The company currently wholly family, with presidential Angelo Zani (son and grandson of the founders) are run by the third generation Dr. Andrea Zani (managing director in charge of the commercial sector) and Dr. Michele Zani (managing director administrative director). In 1992 the surface covered warehouse is set to expand (now about 2,000 square meters) so that the ANGELO ZANI & C. was able, in addition to the products it normally treated in bars and in different profiles ( Fe 37 Drawn, C40 Laminate-Drawn-Adjusted, 9SMnPb36 and 35SMnPb10 for high machinability, 18NCD5 hardening steels and tempera normal and related to Pb, quenched and tempered steels 39NCD3 normal and related to Pb), expand its range (Stainless Steels for the marine industry and food Indeformable Steel, Tubes Tubes and Iron and Aisi, sheets Fe 37 C-40, etc .. ) and gear up for the service of cutting materials (both in series and for light truck), going from meeting the needs of customers. The basic principles to where the JOHNNIE ANGELO & C. srl is inspired are the quality of products, a wide selection and quick delivery; features increasingly recognized by customers and that allow this to count among the most important companies in the industry automatic packaging machines and more than a thousand companies operating in the engineering sector.
AnShan Hong Ming Metallurgical Machinery Co., Ltd and Anshan Ying Yat Trade Co., Ltd is an integrative group corporation.
We can process cast steel, cast copper, cast aluminum and any parts that cannot be processed by machine.
We can produce heavy cast welding products. We also can produce mechanical processing products; rivet welding and heavy rivet heavy cast steel and all kinds of processing products whose weight is 10 ton – 100 ton.
We export wire, reinforced bar, plate, tube (seamless pipe, straight welded tubing, galvanized pipe, high frequency welding tube, helical tube etc), I-beam, angle bar, channel steel and any other steel.
We can design, produce, manufacture, install and test various steel rolling.
Types of service:
1. Providing model, design, manufacture, installation and commissioning as to the requirements of the customers.
2. Providing the plane design, general layout of the equipment; process design and products design of steel rolling etc. various technical design.
3. Providing long-term technical service to the customers as to their requirements.
Welcome to contact with me at asyingyi15 at 126 dot com.
Tel/Fax: 086-0412-8562501
Contact person: Cathy Xu
We are looking forward to hearing from you soon.
Ashapura Stee offer the first class reliable products & services with the highest degree of technical skill and commercial service during production and after sales. In-between this, we lay strong emphasis on quality assurance, environmental protection, economic growth and human respect as they are the fundamental keys to success. All these have helped us to manufacture and supply high-end products such as Sheets & Plates, Coils, Strips and Butt-weld Fittings. Thanks to superior quality of its products and its core values, our company has won the approval of many of the worlds major end users and has obtained the major quality accreditation and certification of ISO 9001:2000.
With over five decades of experience in the metal industry, Ashok Steel Industries is a reputed and quality conscious manufacturer and supplier of construction and industrial products. Our huge experience and expertise is the prime driving force in our efforts to gain a leadership position by offering quality. We Manufacture Alloy and Non Alloy Iron and steel products.
For last four years BCB METAL INC has developed close connections with the biggest Construction company manufacturers, as well as spare parts suppler. Due to this and several other objects we can supply parts, customer service and shipping for the lowest price on the market.
Company offers a wide range of original and only quality aftermarket parts, such as: Caterpillar, Cummins, Komatsu, Hitachi, Atlas Copco, Detroit Diesel, Volvo Construction, Case, New Holland, Buhler, Bobcat, Freightliner, International. We also supply spare parts for Terex, Liebherr, Grove, TigerCat, Waukesha, Ingersoll Rand, Sandvik, Challenger, JCB, Perkins, Isuzu, Kubota and many other brands. Please contact our experienced sales professionals and they we will be able to answer any question in a timely manner.
For more than 25 years BINDER EDELSTAHL has been manufacturing high-quality stainless steel products. Quality, reliability and speed, in combination with intensive consultancy services have been and remain the cornerstones of our success.
Established for over 125 years, we have grown progressively to become one of the few global distributors, processors, and traders of high quality carbon, alloy, stainless steel, duplex steel, and super duplex steel plate.
Established on April, 1978, Camellia Metal Co., Ltd is dedicated in “Cable-tie Tensioning Tools, Cable/Wire/Wire Rope Cutters, Metal Parts for Hand Tools, Free-cutting, Alloy Steel, Carbon, Steel Bright, Carbon Steel Bright” with operations in Taiwan.
Central Steel & Wire Company has over a 100 year history of leadership in the distribution and processing of quality ferrous and nonferrous metal products to meet the needs of customers with demanding quality and delivery requirements. Our quality and service are the benchmarks in the industries we serve.
Central Steel & Wire Company is a solution driven company. While we sell metal products, our core business is service. Our customers receive on-time delivery from our dedicated fleet of trucks. On staff, Metallurgical Engineers are available to support our customers with metal specifications and interpretation expertise. We offer administrative support for our customers through eCOIN, a CUSTOMIZED Order Inquiry Network.
CENTRAVIS is a leading global supplier of high-quality solutions in seamless stainless steel tubes & pipes, ranked # 1 in CIS, # 4 in EU and # 6 in the world on sales volumes with global market share of 3.8%.
Size range of hot-extruded tubes: OD – 57-245 mm; WT – 3,05-35 mm;
Length – up to 15 000 mm.
Size range of cold-rolled tubes: OD – 4-114 mm; WT – 0,2-12 mm;
Length – up to 27 000 mm.
Production facility of « CENTRAVIS PRODUCTION UKRAINE PJSC » (Nikopol, Dnepropetrovsk region, Ukraine) is one of the largest European specialized companies producing seamless stainless steel tubes and pipes and incorporating hot-extrusion and cold-drawing shops, former part of Nikopol Yuzhnotrubny Plant (NYP), until 2000, the largest industrial complex producing seamless stainless steel tubes in the former USSR.
Product portfolio
CENTRAVIS product portfolio includes over 1000 sizes among more than 100 corrosion and heat resistant steel grades in 7 product segments:
General tubes & pipes;
Instrumentation tubes;
Boiler tubes;
Furnace tubes;
Hollow bars;
Heat exchanger tubes;
Nickel-based alloys
centravis-today-01_1.jpg
Product range comprises more than 100 international standards including GOST and TU accepted in CIS and western standards such as ASTM, DIN, NF, UNI, etc.
Sales structure
centravis-today-02.jpg
CENTRAVIS supplies products to all key markets worldwide through branched network of sales offices in Russia, Ukraine, Germany, Switzerland, Italy, the USA and sales agents in other areas like Brazil, Middle East, Korea, Australia and others. Sales geography comprises 70 countries. Advantageous geographical location coupled with a developed product range and Western business standards enabled CENTRAVIS to occupy a unique position in the world market of seamless stainless steel tubes. Almost 60% of products are sold to the EU while the remaining 40% – the CIS market, North America and the rest of the world.
For many years CENTRAVIS has been a leading supplier of seamless stainless steel tubes for nuclear power plants and thermal power plants in Russia and the CIS. Since the beginning of this year, the Company has signed several major contracts with Russian companies for steam generator tubes supply for nuclear power plant projects worldwide with a total value more than $ 30 million. Manufacturer co-operates with the European partners in this direction no less actively. CENTRAVIS supplied the products for such well-known nuclear projects as construction of nuclear power plant of 1,650 MW in Flamanville (France) and “Jules Horowitz” reactor project in another French city -Cadarache. The Company has also made a significant progress in supply of instrumentation tubes for well-known European automotive brands.
In addition to power generation and automotive industries, CENTRAVIS products are widely used in airspace and shipbuilding, chemical and petrochemical industry, mechanical engineering, automotive, oil and gas industries, non-ferrous metallurgy, food processing and other industries.
Established in 1978 By Mr. C.J.Jain (Managing Partner),It is One of the Successful Companies in India with Such Rapid Growth and Expansion.
Our Employees are much dedicated and loyal to their work, they have not only increased Our reputation as a company but also have developed trust and understanding through years of service.