Aleacion Tubos is manufacturer, supplier & exporter of alloy steel pipes, carbon steel pipes, flanges & pipe fittings. we also supply all types of flanges like slip on flanges, blind flanges, weld neck flanges etc
AQE Gate valves are used to limit the flow of fluid flowing straight through the pipeline. This is an effective and reliable way to stop fluid flow. The Slab Gate Valve can be fully opened or fully closed. The slow opening and closing of the valve helps avoid hydraulic hammers, which can damage the pipes connected to the valve. Gate valves are not used for throttling, so do not let them half open. The gate valve has 3 important parts. They are doors, stems and hoods.
The gate can be used in several variations in a gate valve. You may occasionally use knife doors, or if you use crude oil, you may see flat doors. However, in the marine industry, the most common gate is the wedge. This type of gate valve wholesale uses a wedge-shaped metal sheet that can be moved into the valve body to prevent fluid flow. This uses metal-to-metal contact to create a positive pressure seal. However, under extremely low pressure (5 psi or lower), the gate valve may leak a little.
Learn more about AQE valve via https://www.aqemachinery.com/
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc. We Would Appreciate To Get Your Esteemed Enquires And Look Forward To The Pleasure Receiving Your Valuable Response.
ISO9001:2015, PED 2014/68/EU certified. Zhejiang Guanyu Steel Tube Co., Ltd is specialized manufacturer of High Quality Stainless Steel Tubes & Pipe, Nickel Alloy Tubing & Pipe in China. Production area covers an area of 35,000 square meters. Annual output capcity more than 10,000 metric tons.
We have built a complete quality management system and organization according to ISO 9001:2015 and PED 2014/68/EU. Quality control begin with an audit trail and continues from the point of steel melting. for the raw materials, we select the best quality raw material for our customers. right through to the finished product. This level of attention to detail extends throughout the design and manufacturing chain, all kinds inspection will be all though the producing process ensure the Stainless Steel Tubes/Tubing/Pipe and Nickel Alloy Tubes/Tubing/Pipe finished in qualified. With destructive and non-destructive tests according to standard specification and customer’s special requirement, and including verification of performance by independent third-party test houses.
What is Gate valves
Gate valves are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoid high replacement costs.
Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, a partially open gate can vibrate from the fluid flow
Gate valves are mostly used with larger pipe diameters (from 2″ to the largest pipelines) since they are less complex to construct than other types of valves in large sizes.
Main gate valve parts of a gate valve are: body, seat, gate, stem, bonnet and actuator. The main operation mechanism is very simple. When the handwheel is turned, it rotates the stem, which is translated into the vertical movement of a gate via threads.
There are three ways to classify the gate valve.
Types of Disk
Solid taper wedge
Flexible wedge
Split wedge or Parallel disks Valve
Types of Body Bonnet Joint
Screwed Bonnet
Bolted-Bonnet
Welded-Bonnet
Pressure-Seal Bonnet
Types of Stem movement
Rising Stem or OS & Y Type (Outside Stem and Screw Type)
Non-rising Stem type
Gate valvesare used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services.
Some special gate valve is used in slurry and powder product also such as knife gate valve
Rajveer stainless and alloys is Govt recognised manufacturer of High Pressure Pipe Fittings & Flanges in India. We are 3rd largest supplier of buttweld fitting, forged steel fitting and threaded fitting in stainless steel & low alloy carbon steel. best for high temperature & pressure pipe lines.Exporters and manufacturers of Malleable Cast Iron Fittings In India. Bulk stock suppliers of ss MS elbow and reducer. View Price List of Malleable Iron Fittings.
Steel tubes India is manufacturer and exporter of cold drawn seamless, welded and ERW steel tubes and pipes.Steel Tubes India is industrial steel pipes suppliers to Oil & Gas piping, petrochemical refineries & Chemical processing industry.We are Stockist & Supplier of Stainless Steel, Alloy Steel, Carbon Steel, Mild Steel, Nickel Alloys in form of Seamless Tubes, Welded & ERW Pipes & Tubes.
Welcome to Exotic Metal Alloys. We are stockist & suppliers of Nickel & Nickel Alloys in Round Bars, Sheets, Plates,Pipes,Tubes & Wires. In grade of Monel, Inconel, Incolloy ,Hastelloy & other Nickel Alloys according to ASME/ASTM, DIN and other known determinations.
Kamdhenu Group has in its list of manufacturing, marketing, branding and distribution of a diverse range of products including Reinforcement steel Bars, Structural steels, Binding Wire, Colour Coated Sheets, Plywood, and many more. Kamdhenu Group is the largest reinforcement bars manufacturing group in India. The group is manufacturing international quality TMT of Grade bars with best features for construction industry.
Changzhou Tengyue Special Material Technology Co., Ltd ( called in short of Tengyue SMT )
Tengyue SMT is one of leading manufacture and supplier of seamless stainless steel tubes and pipes, duplex steel tubes and pipes and nickel-based alloy steel tubes and pipes for 30+ years. With the trust and support of 500+ partners, our products are applied in more than 50 global markets.
Striving for the high-quality products and constant technological innovation, Tengyue SMT established long-term industry-university-research relations with Changzhou University and Metal Institute, Meanwhile, we actively participate in national science and technology projects and acquired the key technologies of heat transfer tube manufacturing. By carrying out continuous systematic research, the company obtained 25 national authorized patents, including the authorized invention patent closely related to the production technology of the project product “Manufacturing Process of Special Stainless Steel Tubes for Double Tube Sheet Heat-exchangers “.
Certification & Credit Obtained: ISO, Special Equipment (pressure piping components) Manufacturing Licenses and Pressure Vessel PED, etc; in 2019, it obtained E-Park legal person credit certification level A and product quality rating level B.
Manufacturing Annual Capacity: 10000tons
Dimension: OD.6.0 ~ 219.0mm, W.T. 1.0 ~ 22.0mm, Length up to 25 meters.
Materials: 304 & 316 series, duplex steel, and nickel Base alloy 6 and 8 series
Standards: GB, ASTM / ASME, JIS, EN and DIN
Products Applied in key field of petroleum, petrochemical, chemical machinery, nuclear power, boilers, heat exchangers, ships, papermaking, textiles, chemical fiber machinery, medical equipment, environmental protection and other industries.
By constantly updating the production line, improving the production process and the management system and perfecting the detection system, Tengyue Special Material wholeheartedly provides customers with high-quality and highly reliable stainless steel products.
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main-line. It is a short piece of pipe with a lateral outlet. Pipeline Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings, widely used in pipe networks for conveying liquids and gases.
How many types of steel pipe tee?
According to material types there are:
Carbon Steel Pipe Tee
Alloy Steel Tee
Stainless Steel Tee
According to branch diameters and functions there are:
Equal Tee
According to connection types are:
Butt Weld Tee
Socket Weld Tee
Threaded Tee
Carbon Steel Tee VS Alloy Steel Tee VS Stainless Steel Tee
Carbon Steel Tee
Carbon steel tee material: ASTM A234 WPB, WPC; MSS SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, 60, 65 and 70.
ASME/ANSI B16.9 for butt weld tee fittings,
ASME/ANSI B16.11 for socket weld and threaded tee fittings.
Alloy Steel Tee
Alloy steel material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
Stainless Steel Tee
Stainless steel standards: ASTM A403 (common standard for stainless steel pipe fittings.
YARONG is leading supplier, exporter & manufacturer of pipe fitting tee in China. Our products are mainly exported to Korea, Japan, the United Arab Emirates, Saudi Arabia, Egypt, the United States, Australia, Singapore, Indonesia, Middle East countries.If any problems occur during the production process, we will be very honest and communicate with you to find a solution together.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc.
美国联合钢铁工业有限公司(USI Group)是中国最大的钢管集团之一,成立于1989年,海外总部位于新加坡,国内总部位于中国江苏省苏州市苏州工业园区。
USI集团拥有20个分支公司,总资产:10亿美元,员工10000多人,以及6个工厂(分别位于天津,苏州和沧州市),用于生产电焊管(ERW,SSAW和LSAW),无缝碳钢管,镀锌焊接管,方形/矩形钢管,不锈钢管/盘管/板/片,管件,法兰等。
我们先进的设施以及在生产的各个阶段均具有出色的质量控制,可确保产品质量,因为由于我们优质的产品和出色的客户服务,我们赢得了客户的满意并在油气管道行业中享有良好的声誉,我们的客户包括PDVSA,NIOC,中石化,中石油等。
Nansteel Manufacturing Co.,Ltd manufacture and supply differenet steel products, like seamless steel pipe, carbon steel pipe, stainless steel pipe, casing etc.For more,visit:https://www.nan-steel.com/
Nansteel Manufacturing Co.,Ltd manufacture and supply differenet steel products, like
seamless steel pipe, carbon steel pipe, stainless steel pipe, casing etc.For
more,visit:https://www.nan-steel.com/
Xuzhou Powerson Metal Technology Co., Ltd located in Xuzhou, Jiangsu Province, China.It is well-located and easy of access with a ascendant geographical location and convenient transportation.
Powerson main products include: Steel flat(Color coated steel, galvanised steel, galvalume steel, corrugated roofing, tinplate, cold rolled steel, hot rolled steel); Light steel house; Interior and exterior wall panel; Container house.
With superb quality and service are not only sold well in domestic market but also sold to Russia, Southeast Asia, South America, Pakistan ect. and thus gain a good reputation in the international market. Warmly welcome friends from all over the world to visit our company and establish mutual beneficial business relationship!
Email:coco@xzpowerson.com Whatsapp:+86-18115459757
Rafit Metal & Alloys produces and Exports impeccable and super compound darting which incorporates: Hex screw, Hex Nuts, Stud fasteners, Threaded Bars, Washers, Hex attachments and so forth according to guidelines ASTM, ASME, DIN and UNI. The application enterprises are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/Offshore).
Tube Lok is a renowned manufacturer, exporter and supplier of a wide range of carbon steel, alloy steel, mild steel products such as pipes, tubes, tubing, boiler tubes, seamless pipes, seamless tubes, welded pipes, welded tubes, Heat Exchanger Tube, ERW Pipes.
Unifit Metalloys is one of the leading Pipes Manufacturer, Dealer, Supplier and Exporter of Buttwelded Pipe Fittings, Socket Weld Fittings, Threaded Fittings, Forged Fittings, In India. Quality Forge and Fittings is the name of a brand trusted worldwide and used in all leading industries. Trust is the synonym for Quality Forge and Fittings.
Micro Metals is passionate about manufacturing all types of ASTM A194 Grade 2H Nuts and heavy hex nut, with national and international quality standards. We Stock Full range of astm a194 grade 2h washer. Check with ASTM A194 Grade 2H Nut Price In India.
We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,
Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In The Industries Related To The
Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps & Petrochemicals,
Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.
Materials:
PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.
REGARDS
ARVIND JAIN – SALES HEAD
R-PIPE OVERSEAS
T: +91 22 6659 5201
M: +91 9930551137
Whatsapp: +91 9082065807
Skype: asj.rpipe
E: info@rpipeoverseas.com & rpipeoverseas@gmail.com
W: http://www.rpipeoverseas.com
A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,
PB Marg, Mumbai – 400008. (INDIA)
GST TIN NO.: 27ALTPJ6984G1ZB