Shijiazhuang Hongchang Pump Co., Ltd. was founded in 2003 and located in Shijiazhuang and covering an area of 4 hectares and a building area of 25,000 square meters.
Hongchang Pump is a professional manufacturer of slurry pumps and high chromium wear-resistant castings, along with the whole process production capacity from models to finished products. The company has more than 120 employees, with models, casting, heat treatment, machining, assembly and other workshops. With an annual output of 5000 tons of high chromium alloy and 2000 sets of pumps. The products are mainly exported to South Africa, Australia, the USA, Russia, Chile and other countries and regions.
Our company has a complete management system and has passed the certification of ISO9001:2015 quality management system, ISO14001:2015 environmental management system ISO45001:2018 and Occupational Health and safety management system. We have actively fulfilled our social responsibility in environmental protection, becoming the only casting enterprise in Shijiazhuang pump industry whose performance evaluation is Grade A.
Shijiazhuang Ruite Pump Co., Ltd. is one of the high-enterprises integrating research, design, production and sales systems, produces slurry pumps, dredge pumps, gravel pumps, desulphurization pumps and pump parts. Our standard TAH(R) slurry pump, THH slurry pump, TSP(R) Vertical slurry pump, TG(H) gravel pump and all spare parts are interchangeable with Warman (weir) slurry pumps and spares. Meanwhile, Custom slurry pumps and spare parts are welcome. We will open mold and manufacure as your design drawing or samples. With more than 20years of accumulation and development, our factory was founded in 2003, the covering area is more than 3000 square meters, the registered capital is 50 millions. Our slurry pumps are mainly used in coal, mining, FGD in power station, metallurgy, dredging, petro-leum, chemical industry, building material, paper and other industries.
First-rate goods ! Reliable quality! Our Ruite pump have won well-deserved reputation at home and abroad. Our slurry pumps have been exported to Russia, South Africa, Zambia, Australia, Indonesia, Canada, Peru, Chile, Italy, France, Thailand, Singapore, Vietnam, Philippines, Mexico, Saudi Arabia, UAE…more than 37 countries. The professional pre-service, in-service and after-service provide customer perfect slurry solution.
Changsong industrial equipment (Shandong) Co., Ltd. is an innovative and technological & international industrial solution company, established by the management team of Shandong University MBA graduates. Based on experience and international cooperation with SIEMENS-VAI (Primetals), Xstrata, Glencore, SMS, DME, Koniambo, Metso, Vale, SDEPCI, SDM, WESCO, Hiab and other world-renowned companies, through integration of well-known industrial products and spare parts supply channels of headquarters, our business ranges from supplying Complete sets of metallurgical equipment and spare parts,Bisalloy Shangang, fireproofing of shangang, transportation equipment and facilities. Include steel, casting, forging and other metal materials to supplying high-end mechanical and electrical equipment, and instruments.
We have thousands of sub-vendors for the business of joint manufacturing, we also work as agent of many world-renowned brands, we have broad overseas channels accumulated over the years, working together with our strategic partners to provide lean supply chain services, focusing on high-quality customers, to solve the customer’s urgent, special, small orders. JGPI also help all types of enterprises to develop overseas markets, provide commercial and technological consulting services for domestic and foreign enterprises supporting by various industry associations, research institutions, and teams of expert.
Serving your needs of industry
Meeting your demands of advanced instruments
Providing quality and economic hydraulic parts
Service
- Project routine procurement
- Project supplementary procurement
- Production material procurement
- Spare parts procurement
- Collected manufacturing of equipment
- Repair of equipment
- International marketing
- International consultancy of technology and commerce
- Integrated cooperation of project
We focus on the introduction of advanced products and technology to China, the introduction of creative products and enterprises to overseas markets. We integrate industry and expert resources to provide services in fields of energy, environmental protection, metallurgy, chemical, medical, research and other industries. Our corporate culture:
Customer Value Oriented
Customer Trust as the Goal
Quality and Safety as the Gene
We insist on continuous improvement, prevention, access to the trust of suppliers and customers to jointly ensure the smooth progress of the project, to make the world better through our joint efforts.
Shijiazhuang Jintai Purification Equipment Co., Ltd was founded in 1994 (reformed from a state-owned enterprise to a private limited liability company in 2004), located at No.69, Tiangui Street, High-Tech Zone, Shijiazhuang , Hebei Province.
The company has been committed to the development of metal porous materials and related technologies and applications. As early as more than 20 years ago, Jintai began to focus on the development and production of metal porous powder sintered filter elements. It has 15 invention patents and utility model patents. It has been a high-tech enterprise and has passed ISO9001 quality management system certification. After more than 20 years of technical accumulation, Jintai can now provide customers with a variety of product materials and specifications to meet customer needs.
The company’s business covers all provinces in China, and some products are exported to Germany, Italy, Spain, India, Taiwan and other places. Some large domestic companies have designated the company’s products. The company’s products mainly include titanium filter, stainless steel filter, sparger, filter, filter device and system, sheet and disc, saucer-shaped filter disc, aeration ring and so on. Products are widely used in medicine, metallurgy, petroleum and petrochemical, fine chemicals, food and beverage, air purification, electronics industry, textile industry, water treatment and other fields.
CRS is a leading manufacturer of thermit welding materials in China, we have more than 30 years experience of designing thermit welding to the rails. Focusing on rail welding used for railroad, metro, tram, crane rails, turnel construction and maintenance.
We have production area of 2500 square meter, with fully automated batching system, sand mould automatic production & drying machines, equipped with full range of raw materials and welding joint testing equipments. Rail aluminum thermit welding material has been promoted and well applied in the railway lines such as the Beijing-Shanghai high-speed railway line, Jinqin passenger line, Daqin line, Tong-Rang line and Tong-huo line. Materials have been exporting to Australia, Indonesia and other countries many years, the products have won praise.
CRS possesses a qualified team of technicians and engineers who have been improving the quality and performance of products, Certified to the ISO9001:2000 standard, CRS’ welding products have been supplied to a wide range of customers worldwide. Thermit products have been passed Chinese rail welding standard TB/T1632-2005 test, Railway Ministry of China, as well as Australia standard AS1085.15-1995 test, Indonesia welding joint inspection test, Taiwan SGS quality inspection test. We are ready to provide technical & operation training, qualification and certificate for customers to ensure a standardized quality and performance of the welding products.
Our factory is an enterprise manufacturing pipe fittings for more than 30 years. It is supplying Malleable iron fittings, Ductile iron fittings , Gray iron fittings and other steel products, with long history and unchanging faith of producing high quality products.
Main products：Malleable iron pipe fittings, Tube clamps, Air hose couplings, Camlock couplings, Carbon steel pipe nipples, Electric power fittings, Steam couplings, Gas meter connectors etc.
- Founded in 1986, Covering 12,000 square meters, having more than 200 workers. We have a registered capital of 8.88 million, and the annual export volume of 10 million USD.
- As a high-tech enterprise, we have our own R&D team, which can open molds through samples or drawings provided by customers, and even assist customers in developing new products through functional descriptions.
- From purchasing material, casting, annealing, trimming, galvanizing, machining, packing, to exporting, have formed stop production system.
- Various casting techniques: Currently 90% of the products have been changed to coated sand production. And equipped with coated sand production line, which can control the quality requirements of coated sand, and coated sand buried box casting line, further improve the quality of products. Most suitable casting way can be defined according to any products.
- casting surface: our own researched prescription of sand and mold design is used, there’s no joint line, no shift, no sand inclusion, no crack on products, we will satisfy every client.
- Material assurance: on –the –spot sample analysis+ chemical composition analysis after casting, double tests to guarantee stability of material. Electric heating automatic temperature control equipment can precisely control the furnace heats uniformly to ensure product are with the same tenacity.
- Surface treatment: self-color + rust preventing oil, electroplating, hot dip galvanizing, first electroplating and then hot dip galvanizing, first electroplating and then backed galvanizing, first electroplating and then plastic spraying. Different products need different surface treatment, best surface treatment can be defined according to different products.
- Machining technique: we have professional threading machines and CNC lathes to make threads, threads are 100% within specified scope of gauge and plug gauge, included angle of threads is within 90°+-0.5°. High efficiency and high quality producing way make our products have more market value.
- Our certificates: Our factory passed TSE for Turkey, INMETRO for Brazil, and CE, ISO9001:2008, IQNET etc.
- Our clients: Our factory is cooperating with many well-known enterprises, main market for malleable iron pipe fittings is Europe, main market for pipe clamp fittings is U.K., and main market for air hose couplings is USA. There’re also many different kinds of products for specialized application, and are very advantageous in their fields.
Our website:http://www.donghuancast.com
Tianjin KXC group founded in 2004, is an ISO 9001 certified company,committed to manufacturing valves, valve parts & related products for water works and water treatment projects.
KXC consists of HY Valves Co. Ltd and KXC Metal Co. Ltd within our own factory and foundry. We have machining center, CNC machines, pressure test machining, electric furnace, mould machine, sand blasting machine, given all of this, our products quality always under good control.
KXC mainly produce gate valve(Resilient seat, Metal seat), butterfly valve(Concentric and Eccentric), check valve, ball valve, globe valve and etc. Supported by our many years’ experience and expertise in this field,
KXC can also offer OEM &ODM valves and parts.KXC philosophy is to offer high cost performance products with optimal service. Welcome to visit our factories and KXC will satisfy you in all respects.
Our products:Rising Stem Globe Valves, Double Eccentric Butterfly Valve
BEISAI is large-scale joint-stock group foundry enterprise, divided into Hebei BeiSai Metal Products Co., Ltd and ShiJiaZhuang BeiSai Trade Co., Ltd. which was builded in 2003, located in ShiJiazhuang province City. company net assets is up to CNY 45 Milion, The annual production capacity of 60000 Tons casting iron parts. More than 300 employees here. There are 5 senior casting engineers and 21 technical engineers etc. We have 26 sets of centrifugal casting machines and 5 sets of autoumatic machine painting lines and 3 sets of automatic hydraulic pressure testing machines, we have very perfect testing and checking equipment and testing lab, 100% make sure all products are top-quality.
At present our major products and service is Casting Iron Pipes, Fittings, SS Couplings, Carton Steel Clamps which was used for sewer drainage system of buildings. And Casting iron manhole covers and frame, Casting tree gate and Casting valves , fire protection fittings and connectors, Casting cooking hardware, etc.
We also can produce all kinds of large or small machine casting parts and auto casting parts and pump housing and pump console/ impeller and casting pulley according to the drawing or samples.
All our products are fully meet USA and European and National standard ASTM A888/CISPI301/CSA B70, ASTM-A536, DIN 19522, EN877, BS EN877, ISO6594, BS437, BS416, KSD 4307, EN124:1994, BS 497-1:1976, ISO2531, BS EN545/EN598, AWWAC 151, KSD 4311, AS 2280, GB/T13295, GB/T12772 etc.
AQE Gate valves are used to limit the flow of fluid flowing straight through the pipeline. This is an effective and reliable way to stop fluid flow. The Slab Gate Valve can be fully opened or fully closed. The slow opening and closing of the valve helps avoid hydraulic hammers, which can damage the pipes connected to the valve. Gate valves are not used for throttling, so do not let them half open. The gate valve has 3 important parts. They are doors, stems and hoods.
The gate can be used in several variations in a gate valve. You may occasionally use knife doors, or if you use crude oil, you may see flat doors. However, in the marine industry, the most common gate is the wedge. This type of gate valve wholesale uses a wedge-shaped metal sheet that can be moved into the valve body to prevent fluid flow. This uses metal-to-metal contact to create a positive pressure seal. However, under extremely low pressure (5 psi or lower), the gate valve may leak a little.
Learn more about AQE valve via https://www.aqemachinery.com/
What is Gate valves
Gate valves are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoid high replacement costs.
Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, a partially open gate can vibrate from the fluid flow
Gate valves are mostly used with larger pipe diameters (from 2″ to the largest pipelines) since they are less complex to construct than other types of valves in large sizes.
Main gate valve parts of a gate valve are: body, seat, gate, stem, bonnet and actuator. The main operation mechanism is very simple. When the handwheel is turned, it rotates the stem, which is translated into the vertical movement of a gate via threads.
There are three ways to classify the gate valve.
Types of Disk
Solid taper wedge
Flexible wedge
Split wedge or Parallel disks Valve
Types of Body Bonnet Joint
Screwed Bonnet
Bolted-Bonnet
Welded-Bonnet
Pressure-Seal Bonnet
Types of Stem movement
Rising Stem or OS & Y Type (Outside Stem and Screw Type)
Non-rising Stem type
Gate valvesare used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services.
Some special gate valve is used in slurry and powder product also such as knife gate valve
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main-line. It is a short piece of pipe with a lateral outlet. Pipeline Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings, widely used in pipe networks for conveying liquids and gases.
How many types of steel pipe tee?
According to material types there are:
Carbon Steel Pipe Tee
Alloy Steel Tee
Stainless Steel Tee
According to branch diameters and functions there are:
Equal Tee
According to connection types are:
Butt Weld Tee
Socket Weld Tee
Threaded Tee
Carbon Steel Tee VS Alloy Steel Tee VS Stainless Steel Tee
Carbon Steel Tee
Carbon steel tee material: ASTM A234 WPB, WPC; MSS SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, 60, 65 and 70.
ASME/ANSI B16.9 for butt weld tee fittings,
ASME/ANSI B16.11 for socket weld and threaded tee fittings.
Alloy Steel Tee
Alloy steel material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
Stainless Steel Tee
Stainless steel standards: ASTM A403 (common standard for stainless steel pipe fittings.
YARONG is leading supplier, exporter & manufacturer of pipe fitting tee in China. Our products are mainly exported to Korea, Japan, the United Arab Emirates, Saudi Arabia, Egypt, the United States, Australia, Singapore, Indonesia, Middle East countries.If any problems occur during the production process, we will be very honest and communicate with you to find a solution together.
Somos un fabricante profesional de bridas, accesorios de tubería, accesorios forjados en la India, nos especializamos en la fabricación de todos los tamaños, estándar, tipo, etc. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades. Desde material no estándar altamente especializado hasta artículos listos para usar, desde la producción hasta el prototipo, desde mínimos bajos hasta corridas de fábrica, el fabricante de bridas tiene la experiencia para resolver sus requisitos más difíciles.
accesorios de bridas ha sido un fabricante y exportador profesionalmente administrado de bridas, tuberías, tuberías. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades.
Dear Sir,
We would like to introduce our self as one of the leading Exporter , Importer , Stockist & Supplier in India For Nickel based Alloys, Titanium, Monel, Nickel, Inconel, Incolloy , Hastalloy. In form of Sheets, Plates, Coils, Foils , Pipes & Pipe Fittings, Rods, Wires, Circles, Rings, Flats, Angles, Channels Weldolets , Threadolets , Bushing , Female Connector, Spares & Foundation Fasteners in any Grade , in any Size & as per your Drawing
Razor wire is a new type of protective barbed rope. Concertina razor wire is made up with galvanized center wire and outer covered razor in stainless steel or galvanized steel. Razor wire fence has the advantages of beautiful appearance, economy and practicality, has good resistance prevention effect, easy for installation, etc. At present, razor fence has been widely used in many countries’ industrial and mining enterprises, garden apartments, border posts, military fields, prisons, detention centers, government buildings and other national security facilities.
Concertina razor wire fence is a kind of wire fence product made by welding razor wire together. Same as concertina razor wire, this kind of fence also cover densely with razors, this make the fence an not be climbed. Also the steel wire in the razor wire makes the fence very hard to be cut, it is very suitable for prisons, outposts, factory warehouses and other areas requiring high security.
Characteristics of Razor Wire and Razor Wire Fence:
Sharp appearance, good deterrence
Rotatable blades, strong intrusion prevention capability
Corrosion-resistant, long lifespan
Area separation, flexible mobility
Low cost, suitable for large-scale use
Easy installation, easy maintenance
An ISO 9001:2008 Certified Company, Steel Pipes & Tubes Industries is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by Metline Pipes & Tubes are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes, Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
1. Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
2. Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
3. Square Stainless Steel Pipes, Round Stainless Steel Tubes, Rectangular Stainless Steel Pipes & Tubes
4. Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
5. Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
6. Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
7. LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
8. Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
9. ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
10. Galvanised Pipes as per IS:1239/I
11. Square and Rectangular Steel Pipes as per IS: 4923
12. ERW Boiler Tubes: BS 3059, ASTM A 214
13. Air Pre Heater Tubes to BS: 6323 PART V
14. Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
15. Seamless Heat Exchanger Tubes ASTM A 179
16. CDW TUBES IS: 3074 or BS 980
17. CRCA ERW Tubes to IS 3601 OR IS 3074
18. Stainless Steel Electro polished Pipes Manufacturer/Supplier
19. Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
Flexible stainless steel cable mesh
Flexible stainless steel cable mesh, also called stainless steel cable mesh or stainless steel rope mesh, it is made of high quality stainless steel wire cable. According to the production process can be divided into ring type and interweave type. It is mainly used in the construction of wildlife parks, large animal pens or birdhouses, garden greening walls and handrail fillers or safety nets.
The Bzwiremesh plant has been producing this product since 1990. The independently developed equipment and skilled technology of the plant ensure the delivery of high quality products and perfect service on a global scale.
Flexible stainless steel rope net by S.S. SUS304, SUS316, SUS316L and other various material types of wire rope, two main strand structure: 7 * 7 and 7 * 19. Our mesh products are divided into two main lines according to the type of weave: interweave and ferring. Ring type series according to the ring material is divided into aluminum alloy mesh and stainless steel mesh.
Advantages of BZ stainless steel rope mesh:
High tensile strength, light weight;
Good weather resistance and corrosion resistance;
With good transparency, you can watch the animals and appreciate;
Large mesh span allows for large surface mounting.
Anping County Anlida Metal Wire Mesh Co., Ltd. was founded in 2001 in July and was formally established company in 2006. Which is located in Anping County, Hengshui City, Hebei Province, next to the da guang express way. It is “the quality standard of qualified enterprises” Hebei ProvinceChina construction metal doors and Windows, curtain wall industry “innovative enterprise”, the national federation of industry and commerce hardware mechanical and electronic chamber of commerce building metal doors and Windows, curtain wall) committee “vice President of units, commodity wholesale market in the development of China market society committee” merchants nationwide credit management model “, “member of” China hardware products association.
Our products:Expanded Metal Mesh,Aluminum Metal Mesh,Perforated Metal Sheet,Grating,Wire Mesh, etc.
The development direction of the company has a perfect IS09001 international quality management system, and has a group of senior team full of enthusiasm, including experienced, technical comprehensive, excellently engineer, technician team. They constitute the company’s a strong backing.
The company has also quality control in production process and a full range of testing test equipment, which makes that the quality of products can be guaranteed for a long time .We sincerely thank the customers who have given us support and love over the years. We hope to get your continued support, as always, we will provide you with the best quality products and services.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc. We Would Appreciate To Get Your Esteemed Enquires And Look Forward To The Pleasure Receiving Your Valuable Response.
Material: Uncoated Thick Cast Iron.
The Enameled Cast Iron Covered CasseroleIs Thick And Durable For 60 Years. It Has No Chemical Coating And Is Evenly Heated And Not Sticky.
The Vent Hole Of The Cover Is Effectively Pressed, And The Stainless Steel Bead Screw Is Fixed For A Long Time And Is Not Easy To Loose.
Excellent Thermal Conductivity, Good Heat Preservation, Uniform Heat Conduction, Long Residual Temperature, And Added Flavor To The Stew Ingredients.If you have any question on Weining Enameled Cast Iron Covered. We will give the professional answers to your questions
Products name: Stainless steel ferrule mesh, Stainless steel ferrule rope mesh, Stainless steel ferrule cable mesh, X-TEND mesh
Material: High-quality SS 304, 304L, 316, 316L wire ropes and stainless steel ferrules.
Features: light weight, good flexibility, high strength, good transparency, good invisibility. The service life is more than 30 years.
Applications: zoo mesh, animal enclosure, bird aviary, handrail infills, anti-falling safety net, garden fence.
Design and installation: various graphics and structures can be designed, and installation schemes can be provided.
Stainless steel ferrule mesh is also called stainless steel ferrule wire rope mesh. The mainly material is stainless steel cable and stainless steel ferrule. It is produced by putting the ferrules tough the cable first, and then press the ferrule using special molds. This kind of mesh has very beautiful appreance, it also has very good strength and flexibility. We can product various types of ferrule mesh in different cable diameter and mesh opening to meet our clients’ requirement.
Applications
The stainless steel cable mesh, especially the ferrule type mesh, are more used in fields like balustrades on bridges and staircases, large barrier fences, and building facade trellis systems. As an emerging product on architectural decoration and protection, stainless steel rope mesh has provided the mordern architectural decoration and horticulture engineering with a new and stylish element, which are getting more and more appreciated by designeers and clients all over the world.
Somos un fabricante profesional de bridas, accesorios de tubería, accesorios forjados en la India, nos especializamos en la fabricación de todos los tamaños, estándar, tipo, etc. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades. Desde material no estándar altamente especializado hasta artículos listos para usar, desde la producción hasta el prototipo, desde mínimos bajos hasta corridas de fábrica, el fabricante de bridas tiene la experiencia para resolver sus requisitos más difíciles.
At Wonderful, we use advanced equipment to provide you with various exactness cnc machining service, including milling, turning, EDM, wire cutting, EDM and so on. Using our 3-axis, 4-axis and 5-axis CNC machining centers, our skilled machinists can use a variety of plastic and metal materials to manufacture turning and milling parts. Our CNC machining center can not only produce perfect samples for you, but also customize more small batch products for you, making us a one-stop service provider for your advanced design and small batch product needs.https://www.wdfprecision.com/
Door Handle YD-DHA01
Item no.: YD-DHA01
Description: door handle
- Suitable for uPVC doors, composite doors and wooden doors
- Reversible for right and left handed doors
- Sprung handles
- Youding Door HardwareSuitable for the most popular door locks with 92mm lock centres and 122mm fixing centres
Material: Zinc alloy, Stainless steel frame
Process: die casting, machining, surface treatment
Surface: PVD finished, satin finished, black painting, satin nickel, mirror finished, customized.
Door and window handles from YOUDING is with guarantee based on competitive price. Welcome inquiry.
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes – ASTM A179/A179M grade pipe temperature withstanding capabilities, it is applied to steel pipe of tubular heat exchanger, condensers and similar heat transfer equipment. ASTM A179 seamless tubes are used in For tubular heat exchangers,condensers,and similar heat transfer apparatuses. , cement and construction industries,water pump,oil pump,mud pump,petrochemicals and steel plants.
- Application:
- apply to the heat exchangers, condensers and heat transfer equipment and similar pipe.
- Production Standard, Grade, Steel No:
- ASTM A179/ASME SA179
- GB6479 10, 20, 16Mn, 15MnV, 12CrMo, 15 CrMo, 12Cr2Mo, 12SiMoVNb
- Delivery conditions:
- Annealed, Normalized, Normalized and Tempered
- Mill test certificates will be issued according to EN10204 3
- Packing: packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
- Size (mm):
- Outer Dimensions.: 6.0mm – 114.0mm
- Wall Thickness:1mm – 15 mm
- Length: max 12000mm
- Inspection and Test:
- Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
- Surface treatment:
- Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
- Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles.
Product Name: Hot Dipped Galvanized Iron Wire
Item Code: Smart Craftsmen-HDG Wire
Surface Treatment: Electro Galvanized.
Raw Material: SAE1006 SAE1008 Q195 Q235 or Others.
Tensile Strength: 330- 550MPA
Package: Customize.
Place of Origin: Hebei, China.
Loading Port: Tianjin Port
Smart Craftsmen Galvanized iron wire is designed to prevent rust and shiny silver. It is strong, durable and versatile. It has been widely used in landscaping, construction, woven hardware cloth and mesh. Wholesale Galvanized wire is divided into hot-dip galvanized wire and electro-galvanized wire (cold galvanized wire). Galvanized steel wire has good flexibility
Sex and toughness. It has the characteristics of large thickness of galvanized layer and corrosion resistance. Hot-dip galvanized iron wire China is made of low-carbon steel wire, which is drawn, pickled, derusted, annealed and coiled.
Electro-galvanized iron wire is made of selected low-carbon steel through drawing, galvanizing and other processes. Electro-galvanized iron wire has the characteristics of thick galvanized layer, good corrosion resistance and strong galvanized layer.
No.8 Mirror stainless steel mirror sheets is kind of mirror stainless steel sheets, like a mirror, through polishing stainless steel surface treatment, mirror effect can be divided into general grinding, fine grinding, super fine grinding, etc. No.8 Mirror stainless steel sheet process, specifications, colors, patterns and so on can largely meet the different needs of each customer. No 8 mirror finish stainless steel sheet is widely used in a variety of decorative design, as building Interior exterior decoration, screen, door, elevator, lift , wall decoration, cover panel, table or decorative surface, as well as stainless steel anchor line, stainless steel TV wall, column edge, etc; It is an essential foundation for high-end architectural decoration projects.
No. 8 mirror stainless steel sheet offers several advantages over other types of stainless steel sheets. Its highly reflective surface creates an aesthetically pleasing finish that is ideal for decorative applications such as architecture, interior design, and signage. The mirror finish also makes the surface easier to clean and maintain, as it resists fingerprints and smudges. In addition, No. 8 mirror stainless steel sheet is durable, corrosion-resistant, and has a long lifespan, making it a cost-effective choice for many applications.
Why choose us as your No.8 Mirror Stainless Steel Sheet Manufacturer?
As a mirror polished stainless steel sheet manufacturer, We are expertise in polishing stainless steel allows us to produce high-quality mirror finishes with consistent reflectivity and smoothness. Our ability to customize the size, thickness, and grade of stainless steel plates ensures that your customers can find the perfect product for their specific needs. Additionally, our experience in the industry allows you to provide competitive pricing and fast turnaround times, making us a reliable and trusted supplier. Overall, our expertise in mirror polished stainless steel plates offers our customers a durable and aesthetically pleasing solution for their decorative and functional needs.
Hebei Deko Commercial Co., Ltd. (hereinafter referred to as the “DEKO”), the company is located in China’s “Land of Casting” Hebei province, DEKO mainly supplies products involved in municipal engineering and road construction and related products, such as Ductile iron Pipe, Pipe Fitting, Valve, Manhole covers, Gratings, Public Illumination, Urban Furnishing, Flange and Pipe Repair Clamp etc…. we can also produce according to the drawings and samples provided by customers, our products have been exported to Europe, Africa, Asia, Middle East and Southeast Asia etc… providing import and export business for domestic and foreign customers.
DEKO has its own fully automatic vertical production line and now we have reached a strategic cooperation with several manufacturers and become the only designated agent service by manufacturers and can be better provide customers with the best prices, excellent product quality, DEKO’s aim is: to supply the required products and high quality service for every customers and maintain long-term and stable cooperation.
Ky Metal is professional etched stainless steel sheets manufacturer and supplier, offering elevator Etched Stainless Steel Sheet, Wall cladding Etched Stainless Steel Sheet, Stainless Steel Etching Sheets,Decorative SS Etched Sheets, SS Colored Etched Sheets
Etched stainless steel sheets are thin plates of stainless steel that have been chemically treated to produce a pattern or design on the surface. With 8K mirror plate, drawing sheet and sandblasting sheet as the base plate, the surface of the object is further processed after etching. Etching version can be processed by a variety of complex processes such as local blending, wire drawing, gold inlaying and local titanium, to achieve the effect of light and dark patterns and brilliant colors.
Stainless Steel Sheet with Etched Finish is widely used in architectural decoration. Especially in the choice of elevator board, the general use of mirror panel as the elevator bottom sheet, and then according to the needs of the pattern processing, so that the overall effect has a three-dimensional sense, reflect its beautification value.
The installation and use of the elevator should consider its value and safety performance. A variety of different patterns etched out of stainless steel, as well as the use of different colors, so that the elevator space is no longer dull, dull, more lively.
High security fencing also called ‘358 FENCE’ ‘3510 fencing’ ‘antifinger fencing’ ‘clearvu fencing’. It is a high cost version of Loni ChieFence 358 anti climb mesh. The panel is welded with reduced carbon steel cable ， Material Grade: Q195, Surface treatment by Electrostatic polyester powder roaming finish(Powder-coated) over galvanized materials. And after that attach the fencing panels with message by suitable clamps(Clips). As a result of the 12.7 * 76.2 mm small mesh dimension, it is anti cut & anti finger climb.
358 high security fence China FEATURES
Anti climb
See-through panel
Anti-rust,Long Service Life
Fast Installation
Customer specs available
Rigidity
Learn more about our wire mesh via https://www.chiefence.com/
We, Reliable Overseas, are one of the leading wholesalers, exporters, and traders of Stainless Steel Pipes, Nickel Pipes, Inconel Pipes, and much more, established in 2010. Backed by an efficient team of qualified professionals, we are offering all these products in different stipulations.
Product Item：HY005
Manufacturing: Cold Rolled/Cold Drawn
Type: Seamless/Welded
Surface: Annealed and Passivated
Application Fields: heat exchanger, boiler, evaporator
Alloy 825/ UNS N08825/ W.Nr.2.4858/ Incoloy® 825
Alloy 825 tube, also known as Incoloy 825 pipe, W.Nr. 2.4858 or UNS N08825, this nickel alloy steel is a combination of nickel, chromium, and iron, with small amounts of molybdenum, copper, and titanium to enhance its resistance to corrosive environments, especially in chloride-containing media. 825 tubing is a durable and reliable material that is widely used in applications that involve harsh environments and high temperatures.
UNS N08825 Chemical Composition:
| % | Ni | Cr | Fe | Mn | C | Cu | Si | S | Al | Ti | Mo |
| Min | 38.0 | 19.5 | 22.0 | 1.5 | 0.6 | 2.5 | |||||
| Max | 46.0 | 23.5 | 1.0 | 0.05 | 3.0 | 0.5 | 0.03 | 0.2 | 1.2 | 3.5 |
Features of Alloy 825 Tube:
- Excellent Corrosion Resistance: Alloy 825 tube is highly resistant to corrosion, pitting, and stress corrosion cracking in various corrosive environments like nitric acid, sulfuric acid, phosphoric acid, and others.
- High-Temperature Strength: The inconel 825 tube can withstand high temperatures up to 550°C (1020°F) and still maintain its excellent mechanical properties.
- Good Weldability: Incoloy 825 pipe can be easily welded with various welding processes, including gas tungsten arc welding, gas metal arc welding, and shielded metal arc welding.
Incoloy® 825 Physical Constants:
| Density | 8.19 Mg/m³ |
| Melting Range | 1370-1400 ℃ |
Alloy 825 Tube Application:
- Chemical Processing Equipment: Alloy 825 tube is used in the chemical processing industry for making process vessels, reactors, tanks, and other equipment that need to be resistant to corrosion.
- Heat Exchanger Tube UNS N08825: Incoloy 825 tubing is commonly used as heat exchanger tubing in various industries like chemical processing, oil and gas, and power generation.
- Pollution Control: Alloy 825 tube is widely used in pollution control systems due to its excellent corrosion resistance, widely used in scrubber systems for removing harmful gas emissions from power plants and other industrial facilities.
- Petroleum Refining: Inconel 825 pipeis used in petroleum refining applications due to its ability to withstand highly corrosive environments, commonly used in heat exchangers, piping systems, and other equipment that comes into contact with sulfuric acid, hydrochloric acid, and other corrosive substances.
- Offshore Oil and Gas Production: The incolony tubeis widely used in offshore and onshore oil and gas production, where corrosion-resistant materials are needed to withstand harsh corrosive environments.
* Marine: W.Nr.2.4858 is used in marine applications, including seawater cooling systems, desalination plants, and offshore platforms.
* Acid Production: 825 pipe is commonly used in the production of acids such as sulfuric acid, phosphoric acid, and nitric acid due to its excellent resistance to corrosion. It is used in heat exchangers, piping systems, and other equipment that come into contact with these corrosive substances.
* Nuclear Fuel Reprocessing: Incoloy 825 seamless pipe is commonly used in nuclear fuel reprocessing applications due to its ability to withstand highly corrosive environments. It is used in equipment such as storage tanks, piping systems, and heat exchangers that come into contact with radioactive materials and corrosive substances.
Alloy 825 is available in wide variety of shapes and forms including pipe, tube, fitting, flange, sheet, plate, round bar, forging stock, flat bar, wire, hexagon. The various forms of UNS N08825 from Hengyang Piping meet different critical standards like ASTM, ASME, DIN, EN, ISO and clients’ specification. For detailed information about customized pipe and fittings, please contact us!
UNS S31254 / Alloy 6Mo / WNR 1.4547 / F44 / 254SMO Super Austenitic Stainless Steel
UNS S31254 is a high corrosion resistant Super Austenitic Stainless Steel and provide excellent corrosion resistance in severe corrosion environments such as high temperature seawater.
We offer a comprehensive selection of seamless/welded stainless steel pipes, including the UNS S31254 super austenitic stainless steel pipe, also known as 254SMo or WNR 1.4547. Made with high-quality materials and under strict manufacturing standards, these pipes are perfect for a variety of applications in seawater handling systems, desalination plant equipment, chemical processing, and flue gas desulphurization units.
UNS S31254 Stainless Steel Pipe Features:
– High corrosion resistance: Made with alloy UNS S31254, these pipes are highly resistant to corrosion in harsh environments, including high chloride and acidic conditions.
– High strength: The WNR 1.4547 pipes are made with a super austenitic stainless steel with high strength, making them durable and reliable for a range of applications.
– Excellent weldability: The 6mo stainless steel pipes are easy to weld and fabricate, making them a versatile solution for complex piping systems.
– Compliant with industry standards: The 254SMO Super Austenitic Stainless Steel pipes meet the manufacturing standards of ASTM A269, ASTM A312, and ASTM A213, ensuring quality and reliability.
UNS S31254 Chemical Composition (%)
| % | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu |
| Min | 17.5 | 19.5 | 6.0 | 0.18 | 0.50 | |||||
| Max | 0.02 | 1.00 | 0.030 | 0.010 | 0.80 | 18.5 | 20.5 | 6.5 | 0.25 | 1.00 |
254SMO Physical Properties：
| Density | 8.02 Mg/m³ |
| Melting Range | 1360-1405 ℃ |
UNS S31254 Stainless Steel Pipe Applications:
– Seawater handling systems: The UNS 31254 Stainless Steel pipes are ideal for use in seawater handling systems due to their high corrosion resistance and strength.
– Desalination plant equipment: The WNR 1.4547 Stainless Steel tubes are widely used in desalination plant equipment due to their ability to withstand high chloride and saltwater environments.
– Chemical processing: The UNS S31254 pipes are suitable for chemical processing due to their corrosion resistance and thermal stability.
– Flue gas desulphurization unit: The Alloy 6Mo Stainless Steel pipes are ideal for use in flue gas desulphurization units due to their resistance to acids and ability to handle high temperatures.
Manufacturing Standards:
ASTM A213
ASTM A312
ASTM A269
Also individual customer specifications, as a professional UNS 31254 Stainless Steel pipes and tubing supplier, Hengyang is committed to providing high-quality stainless steel pipes to meet the needs of our customers. Contact us today for more information on the UNS S31254 pipe and other products in our collection.
Jade Special Metals is India’s 10th largest supplier, trader & Exporter of Stainless Steel, Carbon steel pipes and round bar. We are specialised in Stocking & Distributing various Stainless Steel, carbon steel pipes, round bar & sheet plates to worldwide for specific & urgent requirements.