We have all molds of Thailand S expanded metal,the metalmeshcorp gothic mesh hole pattern looks nice and is a good choice for decoration and architecture.The surface finish including powder coated and galvanized,standard sizes 4ftx8ft.
How to Order S Expanded Metal ?.
When ordering or specifying Expanded Metal wholesale , please confirm:
The Style
Flattened or Raised
Material
Sheet Size
Example: Expanded Metal S-18 Flattened,carbon steel, standard 4′ x 8′ sheet.
Features of Standard S expanded metal
Smooth surface. It supplies a safe and smooth surface, which will not hurt people.
Corrosion and rust resistance. Various surface treatment and aluminum, stainless steel materials have outstanding chemical stability.
Lightweight. The Sexpanded metal sheet is lightweight and it can save materials and freight costs.
Easy to install and uninstall. The installation of S expanded metal sheet is easy and no need any special tools.
Application of Hot Dipped Galvanized Expanded Metal Mesh:
Architectural applications include ceiling panels, fencing, partitions, speaker grilles and store displays.
Some decorative applications include interior and exterior design facades, screening, sunshades, building cladding and ceiling and wall lighting.
High security fencing also called ‘358 FENCE’ ‘3510 fencing’ ‘antifinger fencing’ ‘clearvu fencing’. It is a high cost version of Loni ChieFence 358 anti climb mesh. The panel is welded with reduced carbon steel cable , Material Grade: Q195, Surface treatment by Electrostatic polyester powder roaming finish(Powder-coated) over galvanized materials. And after that attach the fencing panels with message by suitable clamps(Clips). As a result of the 12.7 * 76.2 mm small mesh dimension, it is anti cut & anti finger climb.
358 high security fence China FEATURES
Anti climb
See-through panel
Anti-rust,Long Service Life
Fast Installation
Customer specs available
Rigidity
Learn more about our wire mesh via https://www.chiefence.com/
Shanghai Mountaingao Corporation Limited, located in Shanghai, is a reliable and professional supplier of wear, heat and corrosion-resistant castings and the relevant grinding equipments and alloy products since 2006. Our casting products and alloy steel products have been well exported to Europe, America, South America and some other countries and areas.
Our products involve various kinds of materials, such as low Chrome alloy steel, middle Chrome alloy steel, high Chrome alloy steel, high chromium white iron, low chromium cast iron, Ni-hard cast iron, high Manganese steel and other heat and corrosion-resistant castings. Our foundry has necessary production and heat treatment equipments, such as mid-frequency induction electrical furnaces, quenching and tempering furnaces, blast shot. Test facilities include Spectrometer for chemical analysis, HRC table hardness tester, HBN table hardness tester, two portable hardness testers, impactor and universal material testing machine for inspection of mechanical properties, matrix microscope for metallographic examination, ultrasonic tester for ultrasonic inspection and magnetic particle tester for magnetic testing. These facilities are used to ensure the consistent quality of products. We achieved the certificate of quality management system ISO 9001:2000. Our current capacity of finished castings is 4500 tons / year. We have a good credit of delivery of products in accordance with the contracts.
With the principles of preciseness, honest and high efficiency, we are keeping on seeking the maximum both of customer’s and ours’ benefits. With the philosophy of “quality, innovation ,and service”, we are taking great efforts to providing our customers with the very finest products and professional service, and continuously advance our core ability of competition and get the momentum for sustainable development.
Warmly welcome any serious inquiries from all our customers of the world, and sincerely hope to cooperate with you to achieve mutual benefit.
Shanghai Bao Zhuo Trade Development Co., Ltd. in steel spot trading, export and distribution of steel as the main business, mainly engaged in domestic major steel rebar, wire rod, hot rolled steel plate (volume), marine steel plate (coil), galvanized sheet (Vol. ), cold rolled coils and steel materials used in construction and urban drainage ductile pipe and other products. At the same time customers can provide packing, commodity
Established in 2009(the predecessor is zero-one company) , Baozhuo Trade Development., Ltd ,with paid-up capital of RMB30 million, is a professional export trading company combining processing, distribution and logistics together, and mainly engaged in steels,. We are mainly engaged in Deformed steel bar, hot rolled steel coils, plates and bars, galvanized coils and sheets, ship building plates as well as other related steel materials. So far we have built good co-operation relationship with many well-known iron and steel enterprises and mills, which are Bao steel, Wuhan Iron and Steel, Laiwu Steel, Tangshan Iron and Steel, Anshan Iron and Steel, Maanshan Iron and Steel, Handan Iron and Steel, Sha steel, Tiantie steel etc.
Turkey and one of the leading investment in the field of Boydak Holding, laid the foundation of the world’s largest industrial enterprise … raw material supplier of Europe’s largest bed and furniture manufacturers … supporters of the industry with Sun that product and service quality … 62 thousand m2, including open 50 thousand m2, the sum Boyçelik operating in 112b m2, “a tube profiles and steel wire-arc” to 2 operates 450 staff in the company. Pipe-profile realized production in the Business pipes profile and sheet metal products with the furniture, automotive, white goods and construction sectors; Wire-arc produced in the Business steel wire, Bonel spring, S spring, LFK (Cossiflex) spring, SL (Super Lastic) bows, bags arc, off-set serves the furniture and textile industries with spring and spring carcasses. mainly in European countries USA, Turkic Republics, Middle East and North African countries before a total of 42 countries exporting Boyçelik, 2012 in pipes and profiles production capacity of 150,000 tons, steel-has brought fiber production capacity to 66,000 tons. Boyçelik, came to the fore with the quality are realized production of European quality norms and it becomes therefore preferred. TSE-ISO-EN 9000 Quality Management System, TSE-ISG-OHSAS-TS 18000 Occupational Health and Safety Management System and the required product range TSA said in the field of quality standard has all the quality standards. to be followed by the final product process from the production of raw material and all operations involving the company’s ERP system is one of the most important investments. In 2008, the ERP system selected SAP system is implemented successfully on the use of the same year. The survey was prepared by ISO, in 2008 359, which ranks 306 in 2009, in 2010, 288 in order to increase the managed Boyçelik its power to offer the products and services of the industry taking the customers’ satisfaction It will continue tomorrow as it is today to be producing power.
Welded mesh fence likewise called “3D FENCE” “medium-security fencing”. It is an affordable version of steel fence. The panel is bonded with low carbon steel wire. Material Grade: Q195, Surface therapy by Electrostatic polyester powder roaming finishing(Powder-coated) over galvanized products. And after that connect the fencing panels with article by suitable clamps(Clips). Because of its Simple framework, Easy installation and also Beautiful look.More customers regard welded wire mesh security fence as the preferred common protective fence.
Loni ChieFence 3d security fence FEATURES
Lower budget
See-through panel
Anti-rust, Long Service Life
Fast Installation
Customer specs available
Rigidity
A well screen is a filter device used as the suction portion of a well constructed in a loose or semi-consolidated aquifer. The screen allows water to enter the well from the saturated aquifer, prevents sediment from entering the well, and acts structurally as a support for the aquifer material. When considering well efficiency and the logarithmic cost to the well owner, the importance of having the right screen cannot be overemphasized.
The sieve is resistant to corrosion because it comes into contact with water. In addition, it has high strength and can keep the surrounding structure intact. The openings of the sieve can be small enough to block the large amount of formation around them. The flow of water through the screen will be uniform.
Well screens are recommended for all environmental drilling operations. It helps extend the life of the well and keeps the flow of water unrestricted. Sand and fine powder sand, these fine particles can be filtered out before there is water. Well screens help remove most of this fine material from well water.
Well screens are made from a variety of materials, ranging from rough-hewed hand designs to machine built high-efficiency and long-life models. The value of the screen depends on how much it contributes to the success of the well.
Standard:
- Large open Spaces
- Do not block the slot
- 3.corrosion resistance
- Sufficient column and collapse strength
Functions:
- Easy to develop
- Minimal scaling tendency
- Low head loss through the screen
- Control sand pumping of all types of aquifers
Slot size selection is a critical step to ensure maximum well performance. The screen is usually designed to block 50% of the stratum, and the entry speed for the screen should not exceed 1/10 or 0.1 ft per second. The velocity is calculated by dividing the well production in GPM by the screen open area in square inches.
The gap size of the screen is based on dimensional analysis of the formation sample. After analyzing the composition size of grain in the sample, grain size distribution curve
I can draw it. Several methods can be used to obtain the allocation of information about grain size. The most widely used method is to pass the material through a stacked set of brass or stainless steel sieves. During the screening process, each sieve removes a certain percentage of the whole sample; The best materials are collected in the chassis. Screening analysis not only provides the basis for determining slot sizes, but also other factors that influence screening well design.
woven screen mesh
Materials:
1) stainless steel wire(302 ,304, 304L ,310, 316 ,316L)
2) black iron wire, carbon steel wire(45#,70#), spring steel ,Mn steel wire(65,60,30Mn).
3) galvanized iron wire, brass or copper wire.
- weaving:
Plain Weave ,double crimped, Lock crimped, Flat top crimped, Intermediate crimped.
- Applications:
crimped wire mesh products are mostly used as screen in mining, coal factory, vibrating screens, crusher screens machines widely use in mining, aggregate processing ,construction and other industries.
- Features:
good resistance against heat, acid, alkaline, ,strong structure, good tensile strength, anti-rust ,anti-wear. long work time high impact resistive.
- we also can make hook/bended metal screen mesh as request.
The performance of 321 stainless steel is very similar to 304, but due to the addition of metallic titanium, it has better resistance to grain boundary corrosion and high temperature strength.
Anping TianHui Wire Mesh Products Co., Ltd. is located in anping county, Hebei province, which also be called “Hometown of wire mesh”in china. Started the factory from the year 1986, We are one of the top manufacturers and exporters of Woven wire Mesh, Screens and welded Wire Mesh in China.
We has over 160 sets of wire mesh machines, have around 20000 rolls in stock for stainless steel wire mesh & welded mesh. We have gained a global sales network reaching to the Local market, USA, Middle-East, Europe and Africa etc.
Our company has been based on “good quality, timely delivery, reasonable price, considerate service” the purpose to serve the masses of customers; And is in line with “quality seek survival, prestige seek development” production principles, in our emphasis on product quality at the same time, also actively communicate with the customer, understand customer needs, to realize our shortcomings, and for clients to provide professional and timely after-sales service, won the praise of the vast old and new customers. Our products are widely used in petroleum, textile, metallurgy, construction, farming, machinery, landscape protection, production and manufacturing, and other fields.
Our Main Products: Stainless Steel Wire Mesh, Shale Shaker Screen, Crimped Wire Mesh, Dutch Wire Mesh, Copper Wire Mesh, Brass Wire Mesh, Stainless Steel Welded Wire Mesh, Galvanized Welded Wire Mesh, Filter Discs And Wire Mesh Processed Products.
TIANHUI Sincerely hope to establish long term business relationship with worldwide customers on the basis of sincerity and mutual benefits.
Established in 1991 as a company specializing in the marketing and distribution of steel products and building materials, Marola is today one of the most effective and innovative companies in the retail sector of metallurgical products and building materials market in Bucharest and Ilfov County .
Experience , timeliness and reliability characterize us in business for 21 years, during which Marola managed to continuously improve its position in the domestic market.
Mission
Our mission is to provide our partners with a wide range of products, taking into account their preferences and necessity, providing steel products and building materials in the shortest time possible, both in industrial sites and in civil construction sites.
Objective
Since 2000, the company’s goal Marola became partners to ensure the best quality and price for the products sold.
Company Values
In 20 years we have learned that communication and understanding are two values worthy partners appreciated. Also in these 20 years we have learned to offer the flexibility and confidence of our partners need.
The function of wire mesh filter is to filter out unwanted contaminants from different types of fluids.
Hebei Zhaoxuan Trading Co., LTD. is a group company, main business including exporting the wire mesh, fence products, and post, which coming from owned mesh, fence and post mills, with turnover of 1000 tons monthly.
We also have 358 security mesh, if you want more information, please contact us!
Hebei Jinzhou City Gold Garden Metal Co., LTD. Was established in 1988, supply full specifications of galvanized wire,annealed black wire, Covers an area of 33.5 thousand square meters, construction area of 20,000 square meters, the total number of enterprise employees 185 people, including professional and technical management personnel 28 people, senior engineer 6 people, annual production capacity of 16,000 tons.
and the products are exported to USA, Germany, Japan, South Korea, Indonesia and other countries and regions, won the domestic and foreign general customers.
The use of post accessories and fittings can better help the mesh and post connection. And it is easy and safe.
ADI ISPAT PRIVATE LIMITED (CIN NO: U27104JH2004PTC010861) was incorporated on 26th July 2004 under the supervision of it’s Directors Mr. Ashok Kr. Sarawgi, Mr. Amit Kr. Sarawgi & Mr. Sumit Kr. sarawgi. Adi Ispat Private Limited Started its manufacturing unit with a 7MT Induction Melting Furnace at its Regd.Works Manjhiladih, Gadi Srirampur Giridih, Jharkhand which started its commercial Production on August 2007 with an annual capacity of 18000MT. It is one of the leading Industries which are producing High Quality MS Ingots in this region. Adi Ispat Private Limited then expanded by adding its Second Steel Melting Shop of same capacity and its annual production capacity of MS Ingot rounded off to 36000MT from September 2009. Adi Ispat Private Limited is now in its Expansion Mode in Phased manner and in Phase II it has commissioned its Hi-Speed, Automated, and Continuous State of Art Rolling Mill Project with annual capacity of 0.3 Million Tons and started its commercial production from February 2010.
Suryoday Allo-Metals Powders Limited, incorporated in1993 with the name of Tirupati Allo-Metals Powders Ltd. The company trades in Iron & Steel Products including M.S. Beam, M.S. Wire, H.R. Plate, H.R. Coil, T.M.T. Bar etc. The company has its registered office located in Pune.
Vishal Pipes Limited an ISO 9001 & 14001 Certified Company takes immense pleasure in introducing itself as one of the leading names in the Engineering Industry having Integrated Steel Complex with modern integration to produce ERW Pipes in Round, Square, Rectangular shapes, Scaffolding Pipes, Conduit Pipes (Black and Galvanised) & PVC Rigid & Conduit Pipes in the most modern State of the Art plant located at Sikandrabad U.P. (32 Km. from Delhi).
The organisation has pioneered its operations in 1989 to produce ERW Black Steel Pipes, Galvanised Steel Pipes & PVC Pipe / Tube Scaffolding Tubes PVC Pipe Fittings, Malleable Iron Pipe Fittings and Hollow Sections. Since then the company has held a commanding position in the construction industry and has not only tapped the premium segment of domestic market but has also earned name in the international markets where the company’s products are exported.
VPL brand is not only into Pipes, but we have also diversified into other fields as well, like Structural Steel, Scaffoldings, Malleable Iron fittings, Hinges, Hand Pumps, Nuts & bolts, Footwear etc. There are different individual companies under a common umbrella, each dedicated to a specific line of product manufacturing, procuring or other particular business activities.