Jade Special Metals is India’s 10th largest supplier, trader & Exporter of Stainless Steel, Carbon steel pipes and round bar. We are specialised in Stocking & Distributing various Stainless Steel, carbon steel pipes, round bar & sheet plates to worldwide for specific & urgent requirements.
We are one of the leading Suppliers and Exporters of Tube Fittings, Pipe Fittings Threaded, and Ferrule Fittings, Needle Valves, Ball valves, Manifold Valves, hex nipple in Mumbai India.
Vandan Steel & Engg. co. is one of the essential merchants and stockists of Hardox and Hardox Round Bars in Mumbai, India. Hardox Wearplates are composite plates having very alloyed wear safe surfacing on a low carbon steel base. These plates are fabricated by customizing programmed hard-facing process bringing about a hard, intense, and very wear safe surface.
Contact: Mukesh Mehta
022-23893665/+91-98215 13630 / +91-93211 13630
visit :https://wearplates.co.in
We at Vandan Steel & Engg. co. Pvt. Ltd are resolved to build our piece of the pie by fulfilling our client prerequisites through offering products at focused costs, on time conveyance, better backing & giving in transit data wherever needed by customer. We should persistently enhance in knowing our customer needs and proactively following up on things needed to carry out the same.
Resolved to attain 100% client fulfilment, we determine that each customer gets the esteem for cash from our products and administrations. We trust in moral transaction strategies in distinctive parts of our business.
Over these years we have earned notoriety as an opportunity and dependable supplier of items. We have received creative arrangement of stock administration, through which we can spare time &meet prompt and mass necessities of clients.
The KLS titanium-clad steel plate is a typical metallic laminar composites. It is also referred to as titanium cladding or titanium-steel bimetallics. Normally, they are created by contortion bonding: either hot/cold-roll bonding or explosive bonding. The titanium dressed steel plate gets the inexpensive and high toughness of steel with the superior corrosion resistance of titanium.
The wholesale titanium clad steel plates are widely used in numerous applications as well as services. These include petrochemical & chemical industry especially chloral alkali process, food industry, plant food sector, damp metallurgy, electroplating, vacuum salt production, aquatic engineering, smokeshaft industry, pressure vessels, heat exchangers, desalination industry, and power plant, etc.
Ceramic lined pipe is made through the self-propagating high-temperature synthesis (SHS) technique.
Self-propagating High-temperature Synthetic process
Self-propagating high-temperature synthesis (SHS) is used to describe a process in which the initial reagents (usual powders), when ignited, spontaneously transforms into products due to the exothermic heat of reaction.
The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features like abrasion resistant, heat resistant, and corrosion-resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry, etc. It has many advantages over steel pipes, cast stone pipes, and steel-plastic compound pipes.
Usage of Ceramic Lined pipe
The ceramic-lined pipe transportation has been widely used in the industries of electric power, metallurgy, coal, petroleum, chemical engineering, building materials, mechanism, and so on.
The ceramic lined elbow throughout the power, metallurgy, coal, petroleum, chemical, building materials, machinery, and other industries, and high-speed development. When lining the wear-resistant ceramic elbow to deliver high grinding material (such as ash, coal, ore powder, etc.), there is a lining of wear-resistant ceramic elbow wear fast, especially the elbow Wear faster. When lining a ceramic-lined elbow to deliver a highly corrosive gas, liquid or solid, there is a problem that the lined wear-resistant ceramic elbow is corroded and is quickly damaged.
There is a problem that it is expensive to use a heat-resistant steel pipe when the material having a higher temperature is conveyed in the lining of the wear-resistant ceramic elbow. After lining the wear-resistant ceramic elbow, these problems are solved.
The ceramic lined elbow is widely used in wear and tear of mine filling material, ore powder and tailings transportation, coal-fired power plant powder, smelting, ash and other things lined with wear-resistant ceramic elbow are also very appropriate.
The ceramic lined pipe, Elbows, Reducer, Tees, and others manufactured in our factory have been used in over 200 thermal power plants, more than 50 mines, and the industries of coal, building materials, mechanism, petroleum, and so on.
Abrasion
Ceramic layer Ceramic Lined Reducer Pipe with flange reducer Al2O3 content greater than 89%, micro-hardness HV1000-1500, which has high abrasion resistance, wear resistance more than ten times higher than carbon steel after quenching, superior tungsten carbide drill.
Application range
- coal pulverizing system of power plant pipeline, including, powder transmission pipeline, thick powder separator pipeline, coal drop pipe, combustion system of a windpipe, a secondary air pipe, three pipeline and burner pipelines, in addition to ash slagging system the discharge pipe, powder pipe, dry ash conveying pipe;
- Iron and steel plant raw material conveying pipeline, collecting pipe, dust pipe, ash pipe, ash pipe, mixing pipe, grinding export pipeline, coal pipeline, coal pipeline, separator pipe, burner radius pipe, etc.;
- Cement plant selection machine outlet pipe, choose machine inlet pipe, pipe dust pipe, vertical mill outlet pipe, circulating air duct, high-temperature air blower, lower material pipe, etc.;
- Petroleum, chemical, mining, coal, coal washing plant, smelting, paper, aluminum, building materials, powder engineering, food machinery, and other processing and conveying material pipes.
Corrosion
Ceramic materials are neutral, chemically stable, have excellent corrosion resistance and acid resistance, resistant to various inorganic acids, organic acids, organic solvents, and their degree of corrosion of stainless steel is more than ten times.
Temperature
Temperature above 2000celsius degree, long-term work in the range of -50 -900 celsius degree.
Easy welding.
The ceramic adjustable tube can be welded, flanged, flexible connectors, and other fast way links, very easy to install.
Clean and easy maintenance
Smooth walls, can prevent scaling, fouling, and self-cleaning functions. Tightness.
Remarks:
- Under the direction of the arrow diagram for the export direction.
- Bend radius is usually 1.5-5 times the diameter of steel pipe (1.5-5D).
- Othe specifications of the composite pipe can be manufactured according to the user requirements.
- The weight is calculated by theoretics, maybe have some tolerance, and real weight will be weigh-in after they finish.
Hoop strength is the resistance against radial pressure. The strength of the ceramic-lined steel composite pipe is 300 to 500MPa.
Features and Advantages of ceramic lined pipe
Ceramic Liner pipe is a high technology production technology-self-fuel high-temperature clutch synthesis method.
1). High Abrasion Resistant:
Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. The composite ceramic-lined steel elbow was used in a mining plant for about fifty thousand hours. The general service life of a common steel elbow is about 700 hours.
2). Corrosion Resistant:
Corundum is a neutral material and is acid-proof and fouling-free.
3). Heat Resistant:
Ceramic lined composite steel pipes can work under circumstances of -50 to 800 Celsius degree.
4). Lower Weight and Convenient Installation:
The ceramic-lined steel pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes and can be welded or connected through flanges, which reduces the expense of transportation and makes the pipes easier to install.
For the pipes with the same sizes, types, and lengths, the weight of the ceramic pipe is about 1/2 of the wearable cast alloy steel pipe’s, while the cost has reduced 10%~20% per meter.
The weight of ceramic-lined steel pipe is about 1/3 of the cast stone bent pipes, 1/2 of the cast stone straight pipes.
Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion-resistant ceramic by SHS ——-Self-propagating High-temperature Synthetic process.
- The ceramic-lined steel composite pipe can be joined by welding the steel pipe layer.
- Ceramic-lined pipes can take place of expensive stainless steel, titanium, nickel, cast stone, or alloy pipes.
- Extended service life can also reduce maintenance costs.
Self-Propagating Ceramic Pipe
Self-propagating ceramic steel pipes create a new generation of abrasion and corrosion-resistant engineering pipelines.
The self-propagating ceramic steel pipe has very good wear resistance, Excellent corrosion resistance, and Excellent thermal resistance performance.
SHS-self-propagating ceramic steel pipe and elbow create a new generation of abrasion and corrosion-resistant engineering pipeline. The composite pipe is composed of three layers: ceramic, intermediate, and steel layers.
The ceramic layer is formed by molten alumina at a temperature above 2500 degrees. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the steel pipe.
Applicable Industries:
- The pipe needs excellent wear resistance property: Power plant, Mining, Sea Port, Coal Plant, And pipe for transporting the powder, slurry, sand, etc.
- Coal washing plant, pipe for transporting coal and other material.
- Pipe for transporting the melted aluminum.
- Any pipe which needs to wear protection, corrosion protection, etc.
Benefits:
- Excellent wear resistance, Alumina content of the ceramic liner is higher than 95%, Hardness HV1000-1500. The wear protection performance is more than 10 times better than carbon steel after quenching,
- Excellent corrosion resistance, stable chemical properties.
- Excellent thermal resistance performance up to 2000℃ Can be used in the area from-50℃ to 900℃ for a long time.
- Can be connected with another pipe by welding, flange and soft fast connecting, and easy installation.
BESTAR is a China-leading product service provider and exporter of steel pipe, also the most valuable subsidiary of Shinestar Holdings Group. BESTAR passed the SGS Certification of China Supplier System, ISO9001 Quality Management System Certification, ISO 14001 Environment Management System Certification, ISO45001 Occupational Health & Safety Management System Certification and CE certification, got comprehensively high score in the HuaXia D&B assessment and has been rated AAAAA credit enterprise by China Credit Evaluation Association. BESTAR, committed to provide professional service to global clients including the lowest price support, professional technical support, flexible payment methods, strong financial support, the integrated procurement program as well as comprehensive bidding program to help customers create value, has become the most reliable partner in the steel pipe industry.
We Are Counted Among The Best Manufacturer, Exporter Stockist & Supplier. We Export 60% Of Our Range Of Flanges, Outlets, Pipe Fittings And Forged Fittings To Many Countries Like Usa, Uk, Italy, Malaysia, Gulf Etc. We Would Appreciate To Get Your Esteemed Enquires And Look Forward To The Pleasure Receiving Your Valuable Response.
We are one of the leading manufacturers, suppliers and exporters of stainless steel sheets, ss sheets, ss plates, ss coils, ss foils, ss polished plates, steel perforated sheets, stainless steel plates, stainless steel coils, stainless steel strips, ss foils, ss shim sheets, steel foils, ss shim sheets, steel polished plates in India.
ISO9001:2015, PED 2014/68/EU certified. Zhejiang Guanyu Steel Tube Co., Ltd is specialized manufacturer of High Quality Stainless Steel Tubes & Pipe, Nickel Alloy Tubing & Pipe in China. Production area covers an area of 35,000 square meters. Annual output capcity more than 10,000 metric tons.
We have built a complete quality management system and organization according to ISO 9001:2015 and PED 2014/68/EU. Quality control begin with an audit trail and continues from the point of steel melting. for the raw materials, we select the best quality raw material for our customers. right through to the finished product. This level of attention to detail extends throughout the design and manufacturing chain, all kinds inspection will be all though the producing process ensure the Stainless Steel Tubes/Tubing/Pipe and Nickel Alloy Tubes/Tubing/Pipe finished in qualified. With destructive and non-destructive tests according to standard specification and customer’s special requirement, and including verification of performance by independent third-party test houses.
Steel tubes India is manufacturer and exporter of cold drawn seamless, welded and ERW steel tubes and pipes.Steel Tubes India is industrial steel pipes suppliers to Oil & Gas piping, petrochemical refineries & Chemical processing industry.We are Stockist & Supplier of Stainless Steel, Alloy Steel, Carbon Steel, Mild Steel, Nickel Alloys in form of Seamless Tubes, Welded & ERW Pipes & Tubes.
Changzhou Tengyue Special Material Technology Co., Ltd ( called in short of Tengyue SMT )
Tengyue SMT is one of leading manufacture and supplier of seamless stainless steel tubes and pipes, duplex steel tubes and pipes and nickel-based alloy steel tubes and pipes for 30+ years. With the trust and support of 500+ partners, our products are applied in more than 50 global markets.
Striving for the high-quality products and constant technological innovation, Tengyue SMT established long-term industry-university-research relations with Changzhou University and Metal Institute, Meanwhile, we actively participate in national science and technology projects and acquired the key technologies of heat transfer tube manufacturing. By carrying out continuous systematic research, the company obtained 25 national authorized patents, including the authorized invention patent closely related to the production technology of the project product “Manufacturing Process of Special Stainless Steel Tubes for Double Tube Sheet Heat-exchangers “.
Certification & Credit Obtained: ISO, Special Equipment (pressure piping components) Manufacturing Licenses and Pressure Vessel PED, etc; in 2019, it obtained E-Park legal person credit certification level A and product quality rating level B.
Manufacturing Annual Capacity: 10000tons
Dimension: OD.6.0 ~ 219.0mm, W.T. 1.0 ~ 22.0mm, Length up to 25 meters.
Materials: 304 & 316 series, duplex steel, and nickel Base alloy 6 and 8 series
Standards: GB, ASTM / ASME, JIS, EN and DIN
Products Applied in key field of petroleum, petrochemical, chemical machinery, nuclear power, boilers, heat exchangers, ships, papermaking, textiles, chemical fiber machinery, medical equipment, environmental protection and other industries.
By constantly updating the production line, improving the production process and the management system and perfecting the detection system, Tengyue Special Material wholeheartedly provides customers with high-quality and highly reliable stainless steel products.
美国联合钢铁工业有限公司（USI Group）是中国最大的钢管集团之一，成立于1989年，海外总部位于新加坡，国内总部位于中国江苏省苏州市苏州工业园区。
USI集团拥有20个分支公司，总资产：10亿美元，员工10000多人，以及6个工厂（分别位于天津，苏州和沧州市），用于生产电焊管（ERW，SSAW和LSAW），无缝碳钢管，镀锌焊接管，方形/矩形钢管，不锈钢管/盘管/板/片，管件，法兰等。
我们先进的设施以及在生产的各个阶段均具有出色的质量控制，可确保产品质量，因为由于我们优质的产品和出色的客户服务，我们赢得了客户的满意并在油气管道行业中享有良好的声誉，我们的客户包括PDVSA，NIOC，中石化，中石油等。
Nansteel Manufacturing Co.,Ltd manufacture and supply differenet steel products, like
seamless steel pipe, carbon steel pipe, stainless steel pipe, casing etc.For
more,visit:https://www.nan-steel.com/
Xuzhou Powerson Metal Technology Co., Ltd located in Xuzhou, Jiangsu Province, China.It is well-located and easy of access with a ascendant geographical location and convenient transportation.
Powerson main products include: Steel flat(Color coated steel, galvanised steel, galvalume steel, corrugated roofing, tinplate, cold rolled steel, hot rolled steel); Light steel house; Interior and exterior wall panel; Container house.
With superb quality and service are not only sold well in domestic market but also sold to Russia, Southeast Asia, South America, Pakistan ect. and thus gain a good reputation in the international market. Warmly welcome friends from all over the world to visit our company and establish mutual beneficial business relationship!
Email:coco@xzpowerson.com Whatsapp:+86-18115459757
Rafit Metal & Alloys produces and Exports impeccable and super compound darting which incorporates: Hex screw, Hex Nuts, Stud fasteners, Threaded Bars, Washers, Hex attachments and so forth according to guidelines ASTM, ASME, DIN and UNI. The application enterprises are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/Offshore).
Special Metals Equipments FZE is a professional Super Duplex 2507 Plate Manufacturers and A240 Type 2507 Super Duplex Plate suppliers.We export Avesta 2507 Shim Sheet, Super Duplex 2507 Plate Suppliers, Duplex 2507 Plate used in extreme applications. Check Duplex 2507 Sheet price and 2507 Coil in UAE .
Unifit Metalloys is one of the leading Pipes Manufacturer, Dealer, Supplier and Exporter of Buttwelded Pipe Fittings, Socket Weld Fittings, Threaded Fittings, Forged Fittings, In India. Quality Forge and Fittings is the name of a brand trusted worldwide and used in all leading industries. Trust is the synonym for Quality Forge and Fittings.
Special Metals Equipments FZE is one of the largest ASTM A240 Super Duplex Coil Manufacturers and Super Duplex Steel Plate Suppliers. We export Super Duplex Stainless Steel Plate, A240 Super Duplex Sheet Suppliers, ASTM A240 Super Duplex Steel Sheet used in extreme applications. Check Super Duplex Plate price and Super Duplex Steel Sheet in UAE .
- Wind turbine foundation anchor bolts manufactured by Longteng has superior strength for even the largest wind turbine projects, Longteng has 15 years of experience in providing various anchor bolts suited in all application types – whether your wind turbines are anchored in soil, on rock or across mixed ground.
Longteng has a proven track record supplying anchor cage system for onshore wind turbine foundations under Gold Wind, Envision, ReeWind, GE and other manufacturers turbines.
- High-strength structural tie rods uses carbon structural steel and alloy steel as raw material, processed by machining, heat treatment and surface anti-corrosion treatment, supplemented by adjusting sleeves, locks and joints to complete a whole set, which featured by both high tensile strength and high toughness.
- Rock bolt or rock anchor is the most basic component of the roadway support in coal mines. It plays a very important role to strengthens the surrounding rock of the roadway of mines and tunnels, it makes the surrounding rock support itself, prevent displacements of rock.
We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,
Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In The Industries Related To The
Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps & Petrochemicals,
Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.
Materials:
PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.
REGARDS
ARVIND JAIN – SALES HEAD
R-PIPE OVERSEAS
T: +91 22 6659 5201
M: +91 9930551137
Whatsapp: +91 9082065807
Skype: asj.rpipe
E: info@rpipeoverseas.com & rpipeoverseas@gmail.com
W: http://www.rpipeoverseas.com
A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,
PB Marg, Mumbai – 400008. (INDIA)
GST TIN NO.: 27ALTPJ6984G1ZB
Product Introduction
Fully threaded steel bars (or PT bars) are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension, and anchorage and the like, and is a novel material for developing the prestressed concrete components.
Company Introduction
Fully threaded steel bars are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight.
Tianjin Cathay Pacific Steel Co., Ltd., which occupies a superior geographical position and convenient transportation. We are the largest agent of Tianjin Tiantie Zhaer Steel Production Co., Ltd., and have won the honor of Sale Champion for many years!
Since the establishment of the company in 2008, our company has focused on Screw Threaded Steel products and related construction products. The products on the market are: FT Bar, its accessories: nuts, plates, couplers, spiral bars, PC strand wires and anchors, metal and plastic ducts, etc.
Our company always regards product quality as the lifeline of the company, adheres to the rigorous, efficient and innovative concept to serve customers, and we are willing to cooperate with new and old customers at home and abroad to provide customers with better quality service and quality products.
Contact Information
Tianjin Cathay Pacific Steel Co.,Ltd
Wendy Lee
Email: tjgtqc@tjgtqc.com
Phone/Wechat/WhatsApp:+86-17612275091
Welded mesh fence likewise called “3D FENCE” “medium-security fencing”. It is an affordable version of steel fence. The panel is bonded with low carbon steel wire. Material Grade: Q195, Surface therapy by Electrostatic polyester powder roaming finishing(Powder-coated) over galvanized products. And after that connect the fencing panels with article by suitable clamps(Clips). Because of its Simple framework, Easy installation and also Beautiful look.More customers regard welded wire mesh security fence as the preferred common protective fence.
Loni ChieFence 3d security fence FEATURES
Lower budget
See-through panel
Anti-rust, Long Service Life
Fast Installation
Customer specs available
Rigidity
Door Handle YD-DHA01
Item no.: YD-DHA01
Description: door handle
- Suitable for uPVC doors, composite doors and wooden doors
- Reversible for right and left handed doors
- Sprung handles
- Youding Door HardwareSuitable for the most popular door locks with 92mm lock centres and 122mm fixing centres
Material: Zinc alloy, Stainless steel frame
Process: die casting, machining, surface treatment
Surface: PVD finished, satin finished, black painting, satin nickel, mirror finished, customized.
Door and window handles from YOUDING is with guarantee based on competitive price. Welcome inquiry.
Wir, Fittings und Flansche ist einer der führenden Hersteller Lieferanten und Exporteure von Edelstahl, Kohlenstoffstahl, legiertem Stahl, Duplex-Stahl, Hoch-Nickel-Legierung Stumpfschweißverschraubungen, Flansche, geschmiedete Armaturen, Bleche, Platten, Spulen, Rundstangen, Stangen , Rohre, Rohre, Auslaufarmaturen in Deutschland.
Glued Steel Fiber, an alternate concrete reinforcing material are high tensile steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
steel fiber reinforced concrete supplier improve the mechanical properties concrete and materials such as ductility,
energy absorption, fatigue, and toughness. This fiber helps to controls plastic shrinkage cracking in concrete; helps reduce or eliminate need for conventional reinforcement.
Application of Glued steel fiber reinforced concrete
- For concrete flooring
Industrial floors
Joint-less floors
Floors-on-piles
Lightly loaded floors
Liquid tight floors & composite metal decking
- stainless steel fiber supplierFor Hard Standing & Heavy Duty
Parking lots
Playgrounds
Airport runways
Taxiways
Maintenance hangers
Access roads & workshops
Ports& Containers for port pavements
Container terminals
Bulk storage areas access roads
For army tank movement
- steel fibers for concrete reinforcementOther Applications
Foundations
Traditional cellar and basement walls
Compression layers
Tunnel engineering
Compared with the GuangYa loose steel fiber the operation and advantages of the glued steel fiber:
- Add the steel fiber directly into the belt, the whole row of steel fiber as a whole, evenly dispersed in the concrete corner
- The water-soluble glue begins to dissolve in a row of steel fibers in the premise of the dispersion, it is again dispersed in every corner of the mono filament fiber, showing the perspective in the concrete of the fiber mesh, which plays an integral strengthening.
- Compared with mono-filament fibers, China bonded steel fiberswill not be bundled to ensure that the fibers in concrete do not coalesce and distribute evenly.
Glued steel fibers are loose hook-end fibers that are bonded together in a row. The great difference between loose fiber and glued fiber is that the former is easy to clog and the latter is easy to disperse evenly.
We, Reliable Overseas, are one of the leading wholesalers, exporters, and traders of Stainless Steel Pipes, Nickel Pipes, Inconel Pipes, and much more, established in 2010. Backed by an efficient team of qualified professionals, we are offering all these products in different stipulations.
Bath Handle Pull YD-BHP12
Item no.: YD-BHP12
Description: Door Handle Pull
Sanitary Hardware Material: Aluminium/zinc alloy
Size: available, customized
Usage: bath hardware, furniture hardware
Process: die casting, machining, surface treatment
Surface: PVD finished, satin nickel, black, mirror finished, bronze, customized
HOT-DIPPED GALVANIZED STEEL COIL
- INTRODUCTION:
Hot-dipped galvanized steel coil is made from steel plate, which is dipped into the dissolved zinc bath, with a zinc layer on the surface. It mainly adopts the continuous galvanizing production process. That means the cold rolled coils are put into the dissolved zinc bath for continuous galvanizing process.
- EVER-SHINE Steel Coil APPLICATION:
Hot-dip galvanized steel coils are available with a pure zinc coating through the hot-dip galvanizing process. It offers the economy, strength and formability of steel combined with the corrosion resistance of zinc. The hot-dip process is the process by which steel gets coated in layers of zinc to protect against rust. It’s especally useful for countless outdoor and industrial applications.
They are mainly used in building roof, door, window, roller shutter doorand automobile’s vehicle shell, chassis, door, trunk lid, Oil tank, and fender, and also electric equipments, such as refrigerator base and shell and so on.
- SPECIFICATION
| THICKNESS | 0.11mm-5.0mm |
| WIDTH | 600-1250mm Max |
| COATING MASS | 20g-400g/m2 |
| Surface Structure | Zero Spangle,Regular Spangle,Minimized Spangle |
| SURFACE TREATMENT | Chromated/non-Chromated,Oiled/non-Oiled,skinpassed/non-skinpassed |
| COIL INNNER DIAMETER | 508mm or 610mm |
Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
ductile iron pipeline wholesale have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe price list is very reasonable.
Cast iron pipe drain pipe、the cast iron sewage pipe and the cast iron gas pipe are widely used.
The wall thickness of the 150mm cast iron pipe is 6mm.
Tee- Banded Hot-dipped Galvanized Malleable Iron Pipe Fittings with BS Thread
| Product Item | malleable iron pipe fitting: elbows, Reputation malleable iron tees, sockets, bends, nipples, unions, crosses, flanges, plugs, backnuts, crosses over, round caps, etc. |
| Material | Malleable cast iron |
| Technics | Casting |
| Size | 1/8″-6″ |
| pipe fittings supplier Edges | Banded, beaded or plain; with or without Ribs. |
| Thread Standard | BS ANSI & DIN |
| Finish | Black, Eclectic Galvanized, Hot Dipped Galvanized, all be antirust treatment |
| Shape | Equal, Reducing |
| China pipes fittings Tee Grades | Heavy series, Standard series, Medium series, Light series |
| Packaging | Cartons, woven bags, wooden boxes |
| Quality Control | Excellent material, precise angles, good antirust property |
| Product Usage | Suitable for joining pipe lines of team, gas, oil, air |
| Certificate | ISO9001:2000; SGS Certificate |
| Others | 1.Special design available according to requirement. |
| 2.MOQ: 1000pcs. Negotialble as per type. | |
| 3.Packaging:In cartons or bags with/without pallet |
Learn more about our product please click here.
accesorios de bridas ha sido un fabricante y exportador profesionalmente administrado de bridas, tuberías, tuberías. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades.
Kitchen sink copper faucet LED draw-in kitchen dishes cold and hot water faucet
Great Flexibility: Pull down sprayer with black rubber hose covers a wide range of areas for easy cleaning and washing. Copper water purification kitchen faucet Easy Operation: Single lever handle for effortless and precise water temperature and volume control. Built In LED: Water powered LED light in changing hues creates a moody ambiance and offers extra relaxation.
– The LED light is powered by water flow, and will be activated once the water is turned on.
– Constructed from solid brass for durability and reliability.
– replacement hose for kitchen faucet factory Finished in a high quality, corrosion resistant polished chrome.
– Features a 360-degree swivel pre-rinse spout design and black flexible rubber spray hose.
– Not suitable for low pressure. Minimum required water pressure is 0.1 MPa (1 bar).
– All mounting hardware and hot/cold waterlines are included.
Model No.: LJZ2 -450×3700
PRODUCT DESCRIPTION
Double Head Cutting Saw Equipment Feature
■ Used for aluminum profile cutting.
■ Carbide saw blade give accurate processing and high endurance.
■ The two heads can work independently and simultaneously.
■ Cutting off the required length and two end angles is available by one time processing
Double Head Cutting Saw Technical Parameter
1) Power supply: three phase, four line 380V, 50Hz
2) Saw motor: 1.5Kw x 2, 2,800r/min
3) Pulling motor: 0.55Kw, 1,400r/min
4) Working pressure: 0.4 – 0.6MPa
5) Air consumption: 200L/min
6) Cutting length: max 3,700mm; min. 400mm
7) Cutting width: max 120mm
8) Cutting height: max. 200mm
9) Cutting angle: 0° – 45°
10) Cutter feeding speed: 0 – 3m/min
11) Saw diameter specification: 450mm x 4mm x 30mm-120
12) Overall dimensions: 4,500mm x 1,100mm x 1,400mm
Processing Accuracy
■ Repeat locating length: ≤0.2mm
■ Cutting angle allowance: ±5′
■ Cutting profile surface planeness: ≤0.10mm
■ Cutting profile surface roughness: Ra12.5μm
If you want to know more, you can click here.
Model No.: LJJS-CNC-500×600
PRODUCT DESCRIPTION
CNC Corner Connector Automatic Cutting Saw Equipment Features
■ This machine is mainly for alum windows corner stake cutting, also used for cutting Alum & PVC profiles.
■ PLC auto program controlling, man-machine interface is colored touch screen, input the cutting size and quantity, then it can cut automatically.
■ Automatic feeding system take the linear guiderail and high precision ball screw, driven by stepping motor. High feeding precision and efficiency.
■ Saw blade spindle take special high accuracy spindle, end face and radial runout are less 0.01mm, cutting surface is highly polished.
■ Saw blade feeding system adopts linear guiderail, with high accuracy and high speed (can be stepless speed regulation)
■ Carbide saw blade give accurate processing and high efficiency.
■ Special workpiece clamping system, besides processing common corner stake, it can also process middle frame corner stake.
■ All closed machine body and cover, with good appearance, safe working and low noisy.
CNC Corner Connector Automatic Cutting Saw Technical Parameter
■ Power: 380V 50Hz
■ Motor Rate: 2.2Kw
■ Saw Blade Diameter: Φ500mm
■ R.P.M: 2800r /min
■ Cutting Width: 135mm
■ Automatic Profile Feeding Length: 4-600mm
■ Working air pressure: 0.5－0.8Mpa
■ Weight: 600kg
If you want to know more, you can click here.
The KLS titanium-clad steel plate is a typical metallic laminar composites. It is also referred to as titanium cladding or titanium-steel bimetallics. Normally, they are created by contortion bonding: either hot/cold-roll bonding or explosive bonding. The titanium dressed steel plate gets the inexpensive and high toughness of steel with the superior corrosion resistance of titanium.
The wholesale titanium clad steel plates are widely used in numerous applications as well as services. These include petrochemical & chemical industry especially chloral alkali process, food industry, plant food sector, damp metallurgy, electroplating, vacuum salt production, aquatic engineering, smokeshaft industry, pressure vessels, heat exchangers, desalination industry, and power plant, etc.
Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
- Copper mould tube( square, rectangle and round )
- Crystallizing equipment of continuous casters
- Mould cooling jacket.
- repair of copper tube moulds
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion ,and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
INNER SURFACE COATINGS
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
SPECIFICATIONS OF COPPER MOULD
Square 60 x 60 – 350 x 350 (mm)
Rectangle 120 x 160 – 180 x 300 (mm)
Diameter 100-400 (mm)
Size(mm): 90×90, 100×100, 110×110, 115×115, 120×120
130×130, 135×135, 140×140, 143×143, 150×150
155×155, 160×160, 165×165, 175×175, 180×180
200×200, 220×220, 100×170, 100×173, 130×240
150×200, 150×210, 150×220, 160×200, 160×220
150×225, 160×235, 165×225, 175×225, 180×220
200×240, 240×240, 235×235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
Established in 1996, Vintex Steel & Engg. Co. has gained immense expertise in supplying & trading of Stainless steel, carbon steel, ferrous metal etc. The supplier company is located in Mumbai, Maharashtra and is one of the leading sellers of listed products. Buy Stainless steel, carbon steel, ferrous metal in bulk from us for the best quality products and service.
Welded razor mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport.
Model: BTO-22, BTO-28, BTO-30, BTO-60, BTO-65
Brand: YUJUN
Code: 73144900
Welded Razor Mesh Specification:
Color: GREEN, WHITE
razor wire security fencing Size: 75mm X 150mm, 150mm X 300mm, 177mm X 400mm, do as required
Material: galvanized, stainless steel
Welded stainless steel razor wire Description
Welded razor mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport. Razor wire mesh is used in operations to pave the field after the installation of a blade barrier. This product can protect you and your property, and ensures the safety of the protective barriers.
This YUJUN razor wire security fence product is almost impossible to climb or cut off with the standard tools, also it has a neat appearance.
Razor mesh is installed in various parts of the world’s airports, military bases, water substation, the border fence, oil depots, factories and so on.
Razor mesh security fence China the benefits
1 it is almost impossible to climb
2 high-strength steel core very difficult to cut off
3 powerful security fence barriers neat appearance
4 no secondary use, so he will not be stolen
5 extremely simple to install, needs three to four to install molding.
More information please click here.
In 1984, Yingkaimo Metal Net Co., Ltd. was founded in Anping County Hebei Province, which is the hometown of wire mesh in China. It has Anping Factory, Dezhou Factory and Dubai Office with more than 500 employees. YKM’s annual value of production is about 50 million US dollars, of which 90% of products delivered to more than 70 countries and regions. It is a high-tech enterprise, also a leading company of industrial cluster enterprises in Hebei Province. YKM brand as a famous brand in Hebei Province has been registered in 17 countries around the world for trademark protection. Nowadays, YKM is one of the most competitive metal wire mesh manufacturers in Asia.
Total area of the two factories is about 156000 square meters with more than 400 sets of manufacturing machines, main machines including international advanced technology Japanese-made RGK, German-made Jager and some Chinese-made machines. Annual production capacity for stainless steel mesh is more than 10 million square meters, with range from 1 mesh to 635 mesh of square mesh and highest dutch weave 2800 mesh. The self-designed two epoxy coating production lines are the most advanced epoxy mesh coating equipment in Asia, its annual output is more than 13 million square meters and it makes YKM to be the R&D and supply center for epoxy mesh.
YKM’s main products are stainless steel wire mesh,epoxy coated wire mesh,nickel wire mesh, copper wire mesh, low-carbon steel wire mesh and all kinds of mesh further-processing products.
More information please view:https://www.china-wiremesh.com/
Roopam Steel is top manufacturer & supplier of seamless steel pipe welded tubes in ferrous and non ferrous material, Stockist of high quality tubular piping products and accessories in India. Call us for more Info at +91-22-6639 4333.
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire