Ped certified manufacturer of PTFE COATED fasteners like bolts, nuts, washers, threaded rod. Materials included inconel, monel, hastelloy, duplex and super duplex steel fasteners. Xylan Coating, PTFE coating dacromet coating is our speciallity.
Since the past few years we have expertise in all exotic grades of fasteners meeting custom requirements if our esteemed clients varying from aeronautics to general purpose applications.
Fasteners are a crucial part of our manufacturing line.
Our manufacturing range in metric sizes ranges from m1-m150
and imperial size ranges from 1/4″-6″ and #1-#20 in numeric inch series.
some of the most known fasteners are mentioned below
Stainless steel fastener range are manufactured in the following grades
- 410 stainless steel fasteners used for martensitic applications
- 304 stainless steel fasteners used for general purpose applications
- 304l stainless steel fasteners used for cryogenic applications
- 309 stainless steel fasteners used for high temperature applications
- 310 stainless steel fasteners used for high temperature applications
- 316 stainless steel fasteners used for corrosive environments
- 316l stainless steel fasteners used for sea water applications
- 317l stainless steel fasteners used for corrosive environments with high temperature applications
- 321 stainless steel fasteners used for high temperature applications
- 347 stainless steel fasteners used for high temperature applications
- 348 stainless steel fasteners used for high temperature applications
- a286 fasteners used for high temperature applications like aerospace.
Apart from stainless steel we also produce alloyed stainless steel fasteners which are expensive as compared to austenitic and martensitic stainless steel known at nitronic stainless steel below are the grades mentioned.
for high temperature applications, a cheaper alternative as compared to nickel alloys are nemonic alloys mentioned below.
For corrosive environments we produce monel fasteners namely
Corrosion and high temperature resistance both can be achieved in the below inconel fasteners.
- inconel 600 fasteners
- inconel 603 fasteners
- inconel 602 fasteners
- inconel 601 fasteners
- inconel 625 fasteners
- inconel 617 fasteners
- inconel 718 fasteners
- inconel x 750 fasteners
- inconel 686 fasteners
high temperature fasteners generally used for aeronautics are mentioned below.
high temperature plus high corrosion resistant hastelloy fasteners are manufactured in the following four grades at torqbolt
99% pure nickel based fastners used for special applications.
titanium and aeronautics have a very old relation and particularly in the following 2 grades.
if better corrosion resistant fasteners are required as compared to stainless steel, silicon bronze and copper nickel is used.
high temperature alloy steel available at cheaper rates as compared to nickel alloys.
Super high austenitic and precipitation hardening stainless steel grades
- 330 stainless steel fasteners
- 904l stainless steel fasteners
- 254 smo fasteners
- alloy 20 fasteners
- 17 4 ph fasteners
- 15 5 ph fasteners
- al 6xn fasteners
Dual Phase stainless steel fasteners with high prep ration used for extremely corrosive environments with high toughness,
- duplex 2205 fasteners
- duplex s31803 fasteners
- duplex 2507 fasteners
- ferralium 255 fasteners
- super duplex s32760 fasteners
- s32520 fasteners
Eastern Steel is a leading manufacturer and distributor
Custom-made
We use the advanced tools and technology to meet the varied requirements of pipes and tubes for the food processing industry, chemical industry, brewing industry, the pharmaceutical industry, cement industry, oil & gas industry, refineries, and water desalination.
Quality advantages
This was achieved by introduction of the unique equipment as well as the latest methods of quality control and testing of the manufactured pipe products. Modern pipe-rolling facilities, powerful technology base and highly qualified personnel make Eastern Steels competitive on equal terms with the worlds recognized leading brands.
IBC GROUP is dedicated to transforming various metal materials all over the world, through the process of coils, steel sheet, steel pipe, wire, profile,Alloy steel, all variety of metal products to the construction and wide manufacture industry. Meanwhile, because maintain long term friendly business relationship with clients. Enjoy solid trust from our regular clients, already working one-stopstation service in other construction related products Such as metal process equipment .All Enjoy highly comments from our customers.Look forward the chance to develop together.
Ashtavinayaka Overseas are manufacturers, suppliers and exporters of high quality stainless steel sheets, stainless steel hot rolled sheet, stainless steel 316 coil, stainless steel polished sheet, stainless steel plate, stainless steel shim sheet, stainless steel coil, stainless steel round bar, stainless steel pipe, stainless steel 304 coil, stainless steel seamless pipe, stainless steel 304 sheet, stainless steel welded pipe, stainless steel 316 sheet, stainless steel erw pipes and tubes, stainless steel 304 plate, in Mumbai, stainless steel 316 plate India.
Our Stainless Steel Products
Stainless Steel Plate
Stainless Steel Sheet
Stainless Steel Coil
Stainless Steel Pipe
Stainless Steel Seamless Pipe
Stainless Steel Welded Pipe
Stainless Steel ERW Pipe
Stainless Steel Round Bar
Stainless Steel Rod
Our High Nickel Alloy Products
High Nickel Alloy Plate
High Nickel Alloy Sheet
High Nickel Alloy Coil
High Nickel Alloy Pipe
High Nickel Alloy Tube
High Nickel Alloy Round Bar
High Nickel Alloy Rod
Know More http://www.ashtavinayakaoverseas.in
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
Who We Are
Ares Engineering is the expert in the manufacturing metal decorative wire mesh for architectural application. With the most advanced facility, we have the most modern and productive mill in China. Our products―whether they’re expanded metal mesh, laser cut sheet, perforated sheet or stainless steel decorative wire mesh―seamlessly blend form and function, challenging the status-quo. Through consistent growth and innovation we strive for the highest quality products at an unbeatable value.
As a major manufacturer and supplier of metal mesh products, we are committed to quality. Our investment in personnel and equipment provides you–customers with innovative and value-based products that meet or exceed your design expectations. From concept to completion, our team of experts and 35 years of experience in metal products can help you choose the mesh that suits your needs.
Our People
At Ares engineering, we are extremely proud of our employees and our commitment to them. Everyone is full of enthusiasm, diligence, dedication, and always strive to pursue the highest quality craftsmanship. They are the heart of our company and the reason why we are able to provide you with high-quality metal mesh products.
We have professional sales staff, engineers, designer, mesh worker, painting technical worker, quality inspector, customer service representatives, and all of the creative, inventive individuals here at Ares that continue to push the boundaries of what metal mesh can be.
With a professional team of product advisors, we are able to guide you in product selection. If your product requires design and technical support, we can provide suitable suggestions, alternatively we can provide price information, availability and lead times.
Company Profile
Ares engineering has been the leading manufacturer of metal mesh products. We are well respected in the industry for being trustworthy in quality and service.
Ares was built as DBL Expanded Metal Mesh Factory in 1986, which only produce the expanded metal mesh at first. With time goes by, our founder introduced many advanced equipment and enlarge our production range, including not only stretched mesh machines, but also punching machines, laser cutting machines, cutting machines, and decorative wire mesh machines. Then we renamed the company name as Anping County Huijin Wire Mesh Co., Ltd on 2008. Next year, we started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology.
With the continuous increase of decorative mesh projects, we invested the international-standard PVDF and Powder Coating Painting line, which can control quality well.
On 2019, we set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. The main purpose of the branch establishment is separating projects from traditional businesses, assembling a dedicated project team which can provide solutions and professional service for metal decorative mesh projects.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
History
1986: Built DBL Expanded Metal Mesh Factory
2008: Renamed as Anping County Huijin Wire Mesh Co., Ltd
2009: Started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology
2012: Invested the international-standard PVDF and Powder Coating Painting line
2019 by now: Set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. Focus on providing solutions and supplying products for metal decorative mesh projects.
Our website:http://www.aresmaterial.com
1958-1990 Hebei XINYU Welding Co., Ltd.
1991-2004 DONGGANG Welding Materials Co.,Ltd, which was founded by Hebei University of Technology and Hongkong Community Service Center,mainly produces High antirust CO2 gas-shield welding wire, Submerged arc welding wire, Stainless steel welding wire & Flux-cored welding wire.
- Now Hebei XINYU Welding Co., Ltd, which mainly produces high strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire . Our products are widely applied to the welding of low-alloy high tensile large & key steel structures in coal machinery, construction machinery, petrochemical machinery, pressure vessels or tanks, oil & gas pipelines, military industry, shipbuilding, bridge and high-rise buildings etc. At the same time,we are the only interprise in the domestic which produces welding wire as well as welding wire equipment.
All our products have passed ISO 9001-2015 quality system certification and CE certification because of our advanced production lines, top professional testing equipment, intelligent R&D team and scientific management system. Meanwhile, we get 7 invention patents including a national one. We are a member of China Mechanical Engineering Association and China Welding Association. Other honors are ” Consumer Trusting Products in Hebei province” ” Famous Brand products in Hebei province” ” Good Credit Enterprise in Hebei Province” and “China Key &Leading Enterprise in high tensile steel welding wire”.
Our Welding wires and welding wire equipment are exported to USA, Italy, Brazil, Russia and India etc.
Welcome you to our factory any time.
An ISO 9001:2008 Certified Company, Steel Pipes & Tubes Industries is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by Metline Pipes & Tubes are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes, Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
1. Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
2. Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
3. Square Stainless Steel Pipes, Round Stainless Steel Tubes, Rectangular Stainless Steel Pipes & Tubes
4. Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
5. Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
6. Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
7. LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
8. Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
9. ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
10. Galvanised Pipes as per IS:1239/I
11. Square and Rectangular Steel Pipes as per IS: 4923
12. ERW Boiler Tubes: BS 3059, ASTM A 214
13. Air Pre Heater Tubes to BS: 6323 PART V
14. Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
15. Seamless Heat Exchanger Tubes ASTM A 179
16. CDW TUBES IS: 3074 or BS 980
17. CRCA ERW Tubes to IS 3601 OR IS 3074
18. Stainless Steel Electro polished Pipes Manufacturer/Supplier
19. Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
Radisson Impex are one of the leading manufacturers, suppliers, exporters of high quality stainless steel flanges, high nickel alloy flanges, inconel flanges suppliers, monel, hastelloy, alloy 20, monel 400 flanges suppliers, titanium alloy, copper nickel flanges, nickel 200 flanges manufacturer, duplex and super duplex steel, hastelloy c276 flanges manufacturers, alloy steel, inconel 600 flanges manufacturer, carbon steel flanges in Mumbai, India. Flanges Manufacturers in India, Flanges Supplier in India
Our Products
Nickel 200 Flanges
Inconel 600 Flanges
Inconel 625 Flanges
Incoloy 800 Flanges
Incoloy 825 Flanges
Hastelloy C276 Flanges
Hastelloy C222 Flanges
Monel 400 Flanges
Titanium Gr2 Flanges
Titanium Gr5 Flanges
Alloy 20 Flanges
SMO 254 Flanges
Stainless Steel 304 Flanges
Stainless Steel 304L Flanges
Stainless Steel 316 Flanges
Stainless Steel 316L Flanges
Stainless Steel 310 Flanges
Stainless Steel 321 Flanges
Stainless Steel 904L Flanges
Alloy Steel Flanges
Alloy Steel F1 Flanges
Alloy Steel F5 Flanges
Alloy Steel F11 Flanges
Alloy Steel F91 Flanges
Duplex 2205 Flanges
Super Duplex 2507 Flanges
Carbon Steel Flanges
Copper Nickel Flanges
more info please visit us http://www.radissonimpex.com
Offering a reliable way to connect pipe systems with the various equipment, valves, and other components of virtually any processing system, flanges are the second most used joining method after welding. Using flanges adds flexibility when maintaining piping systems by allowing for easier disassembly and improved access to system components.
A typical flanged connection is comprised of three parts: Pipe Flanges, Gasket and Bolting
In most cases, there are specific gasket and bolting materials made from the same, or approved materials as the piping components you wish to connect. Stainless Steel flanges are some of the most common. However, flanges are available in a wide range of materials so matching them with your needs is essential. Other common flange materials include Monel, Inconel, Chrome Moly, and many others depending on the application. The best option for your needs will depend on both the system in which you intend to use the flange and your specific requirements.
Flanges are not a one-type-fits-all sort of solution. Sizing aside, matching the ideal flange design to your piping system and intended usage will help to ensure reliable operation, a long service life, and optimal pricing. Here’s a look at the most common flange types available.
THREADED FLANGES
Also known as a screwed flange, this style has a thread inside the flange bore which fits with the matching male thread on the pipe or fitting. The threaded connection means you can avoid welding in many use cases. Simply match the threading to the pipes you wish to connect.
SOCKET-WELD FLANGES
Ideal for smaller pipe diameters in low-temperature and low-pressure scenarios, socket-weld flanges feature a connection in which you place the pipe into the flange and then secure the connection with a single multi-pass fillet weld. This makes this style simpler to install than other welded flange types while avoiding the limitations associated with threaded ends.
Slip-on flanges are very common and are available in a large range of sizes to accommodate systems with higher flow rates and throughput. Simply match the flange to the outer diameter of the pipe you intend to connect. Installation is slightly more technical as you’ll need fillet weld both sides to secure the flange to the pipe.
LAP JOINT FLANGES
Featuring a two-piece design, lap joint flanges require butt welding of the stub end to the pipe or fitting with the use of a backing flange to create the flanged connection. This design makes this style popular for use in systems with limited physical space or systems which require frequent dismantling and maintenance.
Like lap joint flanges, weld neck flanges require butt welding for installation. However, their integrity, performance in systems with multiple repeat bends, and the ability to use them in high-pressure and high-temperature systems make them a leading choice for process piping.
Used for terminating or isolating piping systems, blind flanges are essentially boltable blank discs. When installed properly and combined with the correct gaskets, they can achieve an outstanding seal which is easy to remove when needed.
SPECIALTY FLANGES
The flange types listed above are the most common. However, there is a range of additional specialized flange types available to suit a range of uses and environments. Other options include nipoflanges, weldoflanges, expanding flanges, orifice, long weld neck, forged flange, big size flange, high pressure flange and reducing flanges.
Versatile Overseas Is An ISO 9001:2015 Certified Company And Has A Track Record Of Offering A Wide Range Of Piping Solution At Very Competitive Prices. In A Very Short Period Of Time, We Have Gained An Excellent National And International Reputation.
Established in 1996, Vintex Steel & Engg. Co. has gained immense expertise in supplying & trading of Stainless steel, carbon steel, ferrous metal etc. The supplier company is located in Mumbai, Maharashtra and is one of the leading sellers of listed products. Buy Stainless steel, carbon steel, ferrous metal in bulk from us for the best quality products and service.
Cefa Metal was established in 2011. Our company has a factory that has been operating in the domestic market for years mainly engaged in steel grating, iron wire, wirefence and other products. In 2018, we decided to build our export department in Shijiazhuang City, Hebei, China. We are committed to offering stable supply for customers with competitive price, reliable quality and complete solution for your business.
Anping County Anlida Metal Wire Mesh Co., Ltd. was founded in 2001 in July and was formally established company in 2006. Which is located in Anping County, Hengshui City, Hebei Province, next to the da guang express way. It is “the quality standard of qualified enterprises” Hebei ProvinceChina construction metal doors and Windows, curtain wall industry “innovative enterprise”, the national federation of industry and commerce hardware mechanical and electronic chamber of commerce building metal doors and Windows, curtain wall) committee “vice President of units, commodity wholesale market in the development of China market society committee” merchants nationwide credit management model “, “member of” China hardware products association.
Our products:Expanded Metal Mesh,Aluminum Metal Mesh,Perforated Metal Sheet,Grating,Wire Mesh, etc.
The development direction of the company has a perfect IS09001 international quality management system, and has a group of senior team full of enthusiasm, including experienced, technical comprehensive, excellently engineer, technician team. They constitute the company’s a strong backing.
The company has also quality control in production process and a full range of testing test equipment, which makes that the quality of products can be guaranteed for a long time .We sincerely thank the customers who have given us support and love over the years. We hope to get your continued support, as always, we will provide you with the best quality products and services.
Our factory is an enterprise manufacturing pipe fittings for more than 30 years. It is supplying Malleable iron fittings, Ductile iron fittings , Gray iron fittings and other steel products, with long history and unchanging faith of producing high quality products.
Main products:Malleable iron pipe fittings, Tube clamps, Air hose couplings, Camlock couplings, Carbon steel pipe nipples, Electric power fittings, Steam couplings, Gas meter connectors etc.
- Founded in 1986, Covering 12,000 square meters, having more than 200 workers. We have a registered capital of 8.88 million, and the annual export volume of 10 million USD.
- As a high-tech enterprise, we have our own R&D team, which can open molds through samples or drawings provided by customers, and even assist customers in developing new products through functional descriptions.
- From purchasing material, casting, annealing, trimming, galvanizing, machining, packing, to exporting, have formed stop production system.
- Various casting techniques: Currently 90% of the products have been changed to coated sand production. And equipped with coated sand production line, which can control the quality requirements of coated sand, and coated sand buried box casting line, further improve the quality of products. Most suitable casting way can be defined according to any products.
- casting surface: our own researched prescription of sand and mold design is used, there’s no joint line, no shift, no sand inclusion, no crack on products, we will satisfy every client.
- Material assurance: on –the –spot sample analysis+ chemical composition analysis after casting, double tests to guarantee stability of material. Electric heating automatic temperature control equipment can precisely control the furnace heats uniformly to ensure product are with the same tenacity.
- Surface treatment: self-color + rust preventing oil, electroplating, hot dip galvanizing, first electroplating and then hot dip galvanizing, first electroplating and then backed galvanizing, first electroplating and then plastic spraying. Different products need different surface treatment, best surface treatment can be defined according to different products.
- Machining technique: we have professional threading machines and CNC lathes to make threads, threads are 100% within specified scope of gauge and plug gauge, included angle of threads is within 90°+-0.5°. High efficiency and high quality producing way make our products have more market value.
- Our certificates: Our factory passed TSE for Turkey, INMETRO for Brazil, and CE, ISO9001:2008, IQNET etc.
- Our clients: Our factory is cooperating with many well-known enterprises, main market for malleable iron pipe fittings is Europe, main market for pipe clamp fittings is U.K., and main market for air hose couplings is USA. There’re also many different kinds of products for specialized application, and are very advantageous in their fields.
Our website:http://www.donghuancast.com
湖南格瑞特钢管有限公司,拥有24年的钢管制造经验,是盛世达集团第一家子公司,是世界一流的埋弧直缝焊管生产和服务商。
Sambhav Metal are Manufacturers, Suppliers, Exporters, Traders, Stockists and Dealers of Stainless Steel Pipes and Tubes, Carbon Steel, Alloy Steel, Duplex Steel, High Nickel Alloy, Inconel, Monel, Hastelloy, Alloy 20, Copper Nickel, Stainless Steel 304 Seamless Pipe, SMO 254 Pipes, Tubes, Stainless Steel Pipe Fittings, High Nickel Alloy Flanges, Stainless Steel 316 Seamless Pipe, Pipe Flanges, Round Bars, Stainless Steel 304 Butt weld Fittings, Rods, Sheets, Coils, Plates, Stainless Steel 316 Buttweld Fittings in India.
Our Products
Pipes & Tubes – Stainless Steel, Carbon Steel, Duplex Steel, Alloy Steel and High Nickel Alloy.
Pipe Fittings – Stainless Steel, Carbon Steel, Duplex Steel, Alloy Steel and High Nickel Alloy.
Flanges – Stainless Steel, Carbon Steel, Duplex Steel, Alloy Steel and High Nickel Alloy.
Fasteners – Stainless Steel, Carbon Steel, Duplex Steel, Alloy Steel and High Nickel Alloy.
Round Bars & Rods – Stainless Steel, Carbon Steel, Duplex Steel, Alloy Steel and High Nickel Alloy.
Sheet, Plate & Coils – Stainless Steel, Carbon Steel, Duplex Steel, Alloy Steel and High Nickel Alloy.
More info visit us http://www.sambhavmetal.com
We, Centerway Steel Co.,Ltd, one stop supplier for steel pipes, steel plate, fittings and flanges, valves, round steel, structural steel in China since 1996.
Welcome to contact us for competitive price.
Established in 2007, Zhejiang Flexible Technology Co., Ltd. has developed into a leading manufacturer in the flexible conduit market. From day one, we have always been deeply committed to manufacturing, designing and marketing multiple types of metallic and non-metallic conduits, conduit fittings, fiber optic cables, and fiber optic patch cords. With nearly eight years of experience behind us, we have become one of the most prominent suppliers on the market. We are one of China’s most respected conduit solution providers, offering the broadest range of products in our field for even the most demanding market.
We specialize in producing flexible conduits, which can be divided into multiple categories, according to structure, material, performance and application. Our conduits can be made from galvanized steel, be square locked and interlocked flexible metal conduits, cable conduits and shower hoses, just to name a few. With a wide assortment of fittings and accessories, they are widely used in building cable systems, machinery, petrochemical and metallurgical facilities, and other industries that require wire and cable protection. Our flexible tubing can also serve as a liquid or gas transmission medium.
Our company has also placed a strong significance to the introduction and application of world class technology and production equipment, as well as the reinforcement of the production process control, in order to provide high quality conduits, conduit fittings and armored fiber optic cables to meet a demanding market. We have also proudly provided a number of new production and test equipment for fiber optic cables and patch cords. We have also obtained certificates such as the ISO9001:2008, UL,CE, TUV and more. Our company strives to offer the highest quality products, superior services and new technologies for our flexible conduit products.
More information please click:http://www.conduit-flexible.com
PT Gerai Baja Ringan Kepuh is a pioneer company in the light steel industry network in Indonesia. Where is an affiliated company of PT Sunrise Steel & PT Kepuh Kencana Arum which has more than 30 years of experience. As a light steel industrial network company, PT Gerai Baja Ringan Kepuh not only introduces and sells light steel products. This means that PT Gerai Baja Ringan Kepuh is ready to assist prospective entrepreneurs in preparing systems, SOP, and training employees and operators.
PT Kepuh Kencana Arum (KKA) was established in 1991 in Mojokerto, East Java. KENCANA is a brand introduced to the market by PT Kepuh Kencana Arum. At first PT. Kepuh Kencana Arum manufactures seamless corrugated metal roofing and as time goes by, PT Kepuh Kencana Arum adds a variety of products in the form of metal roof tiles, roof frames, ceiling frames, ceiling coverings, partition frames, and others. With the expertise, perseverance, experience and dedication of the entire company team.
PT Kepuh Kencana Arum has succeeded in improving product quality in accordance with the Indonesian National Standard (SNI) and production capacity by establishing factories in Bogor in 1997, Makassar in 2002, Semarang in 2010, and Bandung in 2020, as well as establishing cooperation with suppliers of raw materials that have international standards and meet Indonesian national standards (SNI). Currently, PT. KKA also has the VIVO brand. PT Kepuh Kencana Arum won the trust of PT. Krakatau Steel through production cooperation for light steel products that use the Krakatau Steel brand.