Ped certified manufacturer of PTFE COATED fasteners like bolts, nuts, washers, threaded rod. Materials included inconel, monel, hastelloy, duplex and super duplex steel fasteners. Xylan Coating, PTFE coating dacromet coating is our speciallity.
Since the past few years we have expertise in all exotic grades of fasteners meeting custom requirements if our esteemed clients varying from aeronautics to general purpose applications.
Fasteners are a crucial part of our manufacturing line.
Our manufacturing range in metric sizes ranges from m1-m150
and imperial size ranges from 1/4″-6″ and #1-#20 in numeric inch series.
some of the most known fasteners are mentioned below
Stainless steel fastener range are manufactured in the following grades
- 410 stainless steel fasteners used for martensitic applications
- 304 stainless steel fasteners used for general purpose applications
- 304l stainless steel fasteners used for cryogenic applications
- 309 stainless steel fasteners used for high temperature applications
- 310 stainless steel fasteners used for high temperature applications
- 316 stainless steel fasteners used for corrosive environments
- 316l stainless steel fasteners used for sea water applications
- 317l stainless steel fasteners used for corrosive environments with high temperature applications
- 321 stainless steel fasteners used for high temperature applications
- 347 stainless steel fasteners used for high temperature applications
- 348 stainless steel fasteners used for high temperature applications
- a286 fasteners used for high temperature applications like aerospace.
Apart from stainless steel we also produce alloyed stainless steel fasteners which are expensive as compared to austenitic and martensitic stainless steel known at nitronic stainless steel below are the grades mentioned.
for high temperature applications, a cheaper alternative as compared to nickel alloys are nemonic alloys mentioned below.
For corrosive environments we produce monel fasteners namely
Corrosion and high temperature resistance both can be achieved in the below inconel fasteners.
- inconel 600 fasteners
- inconel 603 fasteners
- inconel 602 fasteners
- inconel 601 fasteners
- inconel 625 fasteners
- inconel 617 fasteners
- inconel 718 fasteners
- inconel x 750 fasteners
- inconel 686 fasteners
high temperature fasteners generally used for aeronautics are mentioned below.
high temperature plus high corrosion resistant hastelloy fasteners are manufactured in the following four grades at torqbolt
99% pure nickel based fastners used for special applications.
titanium and aeronautics have a very old relation and particularly in the following 2 grades.
if better corrosion resistant fasteners are required as compared to stainless steel, silicon bronze and copper nickel is used.
high temperature alloy steel available at cheaper rates as compared to nickel alloys.
Super high austenitic and precipitation hardening stainless steel grades
- 330 stainless steel fasteners
- 904l stainless steel fasteners
- 254 smo fasteners
- alloy 20 fasteners
- 17 4 ph fasteners
- 15 5 ph fasteners
- al 6xn fasteners
Dual Phase stainless steel fasteners with high prep ration used for extremely corrosive environments with high toughness,
- duplex 2205 fasteners
- duplex s31803 fasteners
- duplex 2507 fasteners
- ferralium 255 fasteners
- super duplex s32760 fasteners
- s32520 fasteners
PT. Kencana Maju Bersama is a company engaged in the distribution of galvalume or lightweight steel manufacturing which is well known under the brand “KENCANA” and branches throughout Indonesia. Behind a beautiful building, there are quality and strong materials. Entrust your loyal construction partner to Kencana Indonesia, the lightweight steel expert of the highest quality. Want a sturdy building for a long time? Use a building frame made of lightweight steel. Contact a trusted lightweight steel supplier for sturdy and durable building results.
Steel grating is generally made of carbon steel, and the surface is hot-dip galvanized, which can prevent oxidation. It can also be made of stainless steel, and the steel grating has the properties of ventilation, lighting, heat dissipation, anti-skid, explosion-proof and so on.
Steel grating is a kind of steel product with square lattice in the middle, which is cross-arranged with flat steel according to a certain spacing and horizontal bars, and welded by pressure welding machine or manually. Steel grating is mainly used as gutter cover. , steel structure platform plate, steel ladder step plate, etc., the cross bar is generally made of twisted square steel.
Advantages of steel grating fence
Material saving: the most material saving method under the same load conditions, correspondingly, the material of the supporting structure can be reduced;
Reduce investment: save material, save labor, save construction period, free of cleaning and maintenance;
Simple construction: on the pre-installed support, it is fixed with bolts or welding, and it can be completed by one person;
Save construction period: the product does not need to be reprocessed on site, and the installation is very fast;
Durable: It has been hot-dip galvanized anti-corrosion treatment before leaving the factory, and has strong impact and heavy pressure resistance;
Modern style: beautiful appearance, standardized design, ventilation and light transmission, giving people an overall smooth modern feeling;
Lightweight structure: less material, light structure, and easy to hoist;
Reduce wind resistance: due to good ventilation, the wind resistance is small in case of strong wind, reducing wind damage;
Anti-contamination: no rain, snow and dust;
Other advantages: ventilation, lighting, heat dissipation, explosion-proof, good anti-skid performance;
Simple design: no need for small support beams, simple structure and simplified design
Acid and alkali corrosion ability: in the range of PH 6 to PH 12.5, a stable protective film is formed on the surface of the zinc layer, and the corrosion resistance is good.
Steel grating use
Steel grating is suitable for alloys, building materials, power stations, boilers, shipbuilding, petrochemical, chemical and general industrial plants, municipal construction and other industries. It has the advantages of ventilation and light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy to clean and easy to install.
Steel grating has been widely used in all walks of life at home and abroad, mainly used as industrial platforms, ladder treads, handrails, passage floors, railway bridge sideways, high-altitude tower platforms, drain covers, well covers, road grilles, three-dimensional It can also be used as a fence for parking lots, institutions, schools, factories, enterprises, sports fields, and garden villas.
A well screen is a filter device used as the suction portion of a well constructed in a loose or semi-consolidated aquifer. The screen allows water to enter the well from the saturated aquifer, prevents sediment from entering the well, and acts structurally as a support for the aquifer material. When considering well efficiency and the logarithmic cost to the well owner, the importance of having the right screen cannot be overemphasized.
The sieve is resistant to corrosion because it comes into contact with water. In addition, it has high strength and can keep the surrounding structure intact. The openings of the sieve can be small enough to block the large amount of formation around them. The flow of water through the screen will be uniform.
Well screens are recommended for all environmental drilling operations. It helps extend the life of the well and keeps the flow of water unrestricted. Sand and fine powder sand, these fine particles can be filtered out before there is water. Well screens help remove most of this fine material from well water.
Well screens are made from a variety of materials, ranging from rough-hewed hand designs to machine built high-efficiency and long-life models. The value of the screen depends on how much it contributes to the success of the well.
Standard:
- Large open Spaces
- Do not block the slot
- 3.corrosion resistance
- Sufficient column and collapse strength
Functions:
- Easy to develop
- Minimal scaling tendency
- Low head loss through the screen
- Control sand pumping of all types of aquifers
Slot size selection is a critical step to ensure maximum well performance. The screen is usually designed to block 50% of the stratum, and the entry speed for the screen should not exceed 1/10 or 0.1 ft per second. The velocity is calculated by dividing the well production in GPM by the screen open area in square inches.
The gap size of the screen is based on dimensional analysis of the formation sample. After analyzing the composition size of grain in the sample, grain size distribution curve
I can draw it. Several methods can be used to obtain the allocation of information about grain size. The most widely used method is to pass the material through a stacked set of brass or stainless steel sieves. During the screening process, each sieve removes a certain percentage of the whole sample; The best materials are collected in the chassis. Screening analysis not only provides the basis for determining slot sizes, but also other factors that influence screening well design.
SHINESTAR STEEL GROUP CO., LTD mainly produce various carbon and alloy steel pipes including oil & gas pipe, pressure pipe, mechanical tubing, and stainless steel tube, etc.
Hebei Yeyuan Construction Engineering Co., Ltd. is a professional import and export company，
Our company mainly sells wire mesh and fence products. Wire mesh products include stainless steel wire mesh, copper wire mesh, welded wire mesh, gabion basket, hexagonal wire mesh,layer chicken cages, expanded metal mesh, window screen, black woven wire mesh, steel grating ,concertina wire, Barbed wire, etc. The fence products including anti clamp fence,chain link fence,defensive barrier,palisade fence,airport fence,spike fence,roll top fence,double wire fence,temporary fence,crowd barrier,wire mesh panel etc.
The company has independent import and export management rights and a complete customs clearance system such as China’s electronic port to ensure the smooth flow of domestic and foreign distribution! Ensure that customers who urgently need to transfer goods from abroad get the goods in the shortest time.
Facing foreign countries, our company’s products are mainly sold to South Korea, Japan, Chile, Argentina, Brazil, the United States, Turkey, the Philippines, Australia, India and many other countries and regions. Over the years, our company has won the trust and favor of our customers with high-quality products, first-class service,so that our wire mesh and fence products are spread all over the country and overseas! Thanks to the support of new and old customers, Yeyuan Company will work harder and enterprising, and give back to customers with better and more efficient services!
We have an experienced technical consulting agency,in order for you to make the right choice of wire mesh and fence, we have established a marketing team with first-class efficiency and first-class service!
Strong technical force, high quality and first-class marketing and after-sales service are your best choice!
——————Welcome to choose Hebei Yeyuan Construction Engineering Co., Ltd
Expanded metal, also known as metal mesh, refers to any type of metal raw material that can expand in response to different climate changes. This expansion capability makes it ideal for many functions, and it also helps reduce wear on components made with this metal structure. Expanded metal can be used to make many different types of objects, including metal grinders, wall art, furniture and other objects, where the ability to cope with climate change helps protect the integrity of the finished product.
One of the most common examples of such metal products is expanded metal sheets. These sheets can be scored and peeled to create perforation designs, which can then be used to create many different metal products. This method can be used to create mesh designs and is often found in outdoor furniture made entirely or partially of metal parts. The same technique can also be used to create large panels for use as wall art, room dividers, and metal products with similar functionality and decoration. Although expanded metal can expand and contract when exposed to different weather conditions, it is very durable and very suitable for use in many different products.
Expanded metals can also be used to increase the strength of many construction projects. By including metal sheets or even metal strips in the masonry work, it can help maintain the integrity of the masonry over a long period of time. The same method can be used to provide additional strength to plaster and other types of concrete structures. When used to create perforated or diamond-shaped grids, expanded metal can be effectively used to create cages or other enclosures, ideal for everything from animal kennel spaces to storage areas for holding various supplies. One of the advantages of constructing these types of enclosures with expanded metal is that it allows air to circulate freely and improves visibility.
Today, many other applications for metal expansion are also adopted. This includes creating expanded metal fencing that are both decorative and durable. The metal can be used to make grills suitable for outdoor use and various forms of indoor cooking equipment. Many companies use expanded metal to create a variety of products that can be used by individual consumers and business operations, making this metal one of the most widely used material categories today.
Steel grating fence, also known as welded steel grating fence, is the most durable metal grating product. They are made of mild steel. We provide complete solutions for steel grille, pressure lock grille, heavy-duty grille, steel stair treads, wooden board grille, safety grille, trench cover, etc. All gratings are very rugged and suitable for all bearing applications. And all lenticular products are completely recyclable.
Steel grating fence is made by welding with flat steel and bars with certain distances. It goes through cutting, opening, edging and other processes. The products enjoy the feature of high strength, light structure, high bearing, convenience for loading and other properties. The hot dipped zinc coating gives the product excellent anti-corrosion.
The Grating Fence can be customized according to the unique design of a specific building project, and can contain characteristic columns. The integrity of the fused grating material allows it to be cut to Grating Fence of individual shapes, such as bows or wavy tops.
Material specifications
Material: high quality low carbon steel, stainless steel 304 or 316.
Types: plain bar as standard.
Finishes: electric galvanized, hot dipped galvanized, powder coated, according to the difference surface treatment.
PRODUCT DETAILS
Barbed wire can be widely used as accessories for woven wire fences to form a fencing system or security system. It is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing.
Barbed wire is a protective net formed by mechanically winding barbed wire around the main wire through various weaving techniques.
Anti-corrosion, anti-aging, high durable. Barbed wire can be used with chain link or other fencing barriers for added security. It can discourage unauthorized entry and is suited to a variety of containment needs.
Mainly serves in isolation and protection of grassland, boundary, railway, highway,prisons, private residence, bank, bill printing factory, and also widely used in military base, industry, agriculture, animal husbandry, plantation for fencing.
Somos fabricantes, exportadores y proveedores de acero dúplex y súper dúplex, acero inoxidable, acero aleado, acero al carbono, aleaciones con alto contenido de níquel como Monel, Inconel, Hastelloy y aleaciones de cuproníquel en diversas formas, como accesorios de tubería, bridas, sujetadores y accesorios forjados.
Galvalume steel is an important alloy material often used in daily life. The galvanized steel sheet is composed of aluminum-zinc alloy structure, which is composed of 55% aluminum, 43.5% zinc and 1.5% silicon solidified at a high temperature of 600℃. Its entire structure is composed of aluminum-iron-silicon-zinc, forming a dense quaternary crystal. Of an alloy.
Characteristics of Galvalume
Hot-dipped Galvalume Steel Coil has many excellent characteristics: strong corrosion resistance, 3 times that of pure galvanized sheet; beautiful spangles on the surface, which can be used as building exterior panels.
Corrosion resistance:
The corrosion resistance of “aluminized zinc steel coil” is mainly due to the protective function of aluminum and aluminum. When zinc is worn, aluminum forms a dense layer of aluminum oxide, which prevents corrosion-resistant substances from further corroding the interior.
Heat resistance:
Hot-dipped Galvalume Steel Coil has good heat resistance and can withstand high temperatures of more than 300 degrees Celsius. It is very similar to the high temperature resistance of aluminized steel plate. It is often used in chimney pipes, ovens, luminaires and fluorescent lampshades.
Heat reflectivity:
The heat reflectivity of Hot-dipped Galvalume Steel Coil is very high, twice that of galvanized steel sheet, and people often use it as a material for heat insulation.
Economical:
Because the density of 55% AL-Zn is lower than that of Zn, the area of the galvanized steel sheet is more than 3% larger than that of the coated steel sheet when the weight is the same and the thickness of the gold plating layer is the same.
Application of Hot-dipped Galvalume Steel Coil
use
The main uses of galvanized products are in two aspects. One is the shell and box of other electrical equipment used in electrical switch cabinets; the other is galvanized steel roofing for steel structure buildings, because of its good anti-corrosion and anti-corrosion properties. In many areas with heavy industrial pollution, aluminum-zinc color panels or aluminum-zinc fingerprint-resistant light panels are directly used on walls or roofs.
Construction: roofs, walls, garages, soundproof walls, pipes and modular houses, etc.
Automobile: muffler, exhaust pipe, wiper attachment, fuel tank, truck box, etc.
Home appliances: refrigerator back panels, gas stoves, air conditioners, electronic microwave ovens, LCD frames, CRT explosion-proof belts, LED backlights, electrical cabinets, etc.
Agricultural: pig houses, chicken houses, granaries, greenhouse pipes, etc.
Others: thermal insulation cover, heat exchanger, dryer, water heater, etc.
Hebei Ekro Import And Export Trading Co. Ltd. is located in Shijiazhuang city, Hebei Province,has its own factory named DingZhou Yikang Metal Products Co.ltd which is founded in 1995. It’s located in LiuSu Industrial Zone, DingZhou City, HeBei Province and covers 6000 square metres.
We mainly specialize in the production and exporting of all kinds of wire mesh including hexagonal mesh, welded mesh, chain link fence, PVC coated mesh and all kinds of wires like galvanized wire, PVC coated wire, black wire, razor wire, barbed wire etc.
We have the whole facility of mesh production line, PVC coating line, zinc coating line, wire drawing line and packing line.
Annual production capacity is 1000 containers and turnover is upto 100,000,000 RMB last year. Our company also have the direct import & export rights.
Hebei Ekro(YiKang metal) has always adhered to “quality first” over the years. Credibility and good service are our business philosophy. We always commit to providing you with high-quality products and quality services. Having a professional, dedicated design management team, production team and quality control team, we control every aspect and process rigorously .
Over the past few years of production, management and development, Hebei Ekro(YiKang metal) set up its own quality management system. Passed the ISO9001: 2000 quality system certification & SGS management system and get the pollutant discharging license. Hebei Ekro(YiKang metal) always implement the concept of customer value comes first, tailor-made products to meet the needs of different customers, and continuously provide customers with solutions and technical problems.
Over 20 years development, we have a batch of long -term business partners over 30 countries all over the world, such as in Europe, North America, South America, Middle East, Africa, Southeast Asia etc.
Warmly welcome to visit us, your forever friend and best partner!
PC Wire Indented
PC Wire (also referred to as Prestressed Concrete Steel Wire) is high tensile, low relaxation steel wire made from high-carbon steel and widely used for prestressed and post-tensioning technology in various shapes of PC structures. It has the following characteristics and advantages:
High tensile strength and low relaxation
The bond stress between steel wire and concrete increases
Stable modulus of elasticity
We are high carbon steel PC Wire supplier, Indented PC Wire and high carbon steel PC Wire all can we supply. Warmly welcome new and old customers to visit and patronize!
https://www.hyxpcwire.com/product-pc-wire-indented.html
PRODUCT PROPERTIES
| Product Name | PC Wire Huayongxin |
| Type of Surface | Spiral Ribbed, Indented, Plain |
| Materials | SWRH82B |
| Diameter | 4.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm |
| Tensile Strength | 1470Mpa-1770Mpa |
| Relaxation (%) | ≤2.5 |
| Elongation (%) | ≥3.5 |
| Standard | ASTM A 421, GB/T5223, BS5896, JISG3536, and required standard. |
| Packing | Packed in coils (around 700-1300kg/coil). Each coil is strapped by steel bands at 8 places, fully wrapped with anti-rust plastic & PP woven sheet. |
| Application | PC Wire is characterized with high tensile strength and low relaxation. It’s widely used in production of prestressed spun concrete poles, PHC Piles, in construction of large scale railroad, high-way bridges, building trusses, overhead crane beams, industrial and civil prefabricated concrete slabs, wall board, power station, etc. |
| Our Advantages | Extensive experience in exporting.
Professional team to manage production and control product quality. Equipped with advanced testing facilities and abide by the principle of testing each coil produced. |
Prestressed Concrete Steel Wire Spiral Ribbed Huayongxin
PC Wire (also referred to as Prestressed Concrete Steel Wire) is high tensile, low relaxation steel wire made from high-carbon steel and widely used for prestressed and post-tensioning technology in various shapes of PC structures.
Has the following characteristics and advantages:
High tensile strength and low relaxation
More bonding stress between wire and concrete
Stable modulus of elasticity
| Product Name | PC Wire(Huayongxin Prestressed Concrete Steel Wire) |
| Type of Surface | Spiral Ribbed, Indented, Plain |
| Materials | SWRH82B |
| Diameter | 4.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm |
| Surface treatment | Uncoated prestressed steel wire, prestressed epoxy coated steel wire and galvanized prestressed steel wire. |
| Tensile Strength | 1470Mpa-1770Mpa |
| Relaxation (%) | ≤2.5 |
| Elongation (%) | ≥3.5 |
| Standard | ASTM A 421, GB/T5223, BS5896, JISG3536, and required standard. |
| Packing | Volume (about 700-1300kg/ volume). Each roll is bound with steel tape at 8 places and fully wrapped with rust-proof plastic and PP braided sheet. |
| PC Wire Application
|
PC Wire is characterized with high tensile strength and low relaxation. It’s widely used in production of prestressed spun concrete poles, PHC Piles, in construction of large scale railroad, high-way bridges, building trusses, overhead crane beams, industrial and civil prefabricated concrete slabs, wall board, power station, etc. |
| HUAYONGXIN Advantages
|
Professional team to manage production and control product quality.
Equipped with advanced test equipment, and comply with the principle of testing each coil produced.
Rich export experience. |
Black annealed wire is also known as oil painted black iron wire or black mild steel wire, which is offered in the form of coil wire, tie wire or cut into straight wire.
| Name | Black annealed wire | Black annealed cut iron wire | Black annealed binding tie wire |
| Wire Guage | BWG8 ~ 26# | AWG8 ~ 26# | SWG8 ~ 26# |
| Wire Diameter | 4mm ~ 0.46mm | 4mm ~ 0.46mm | 4mm ~ 0.46mm |
| Material | Q195 or as needed | ||
| Coil weight | 10-100KGS | ||
| Tensile Strength | 30KGS/mm²— 55KGS/mm² | ||
Oiled Black Iron Wire Best® Packing Details:
(1) Wrapped with Pvc film inside, outside Hessian cloth or woven cloth.
(2) Other packing according customer’s requirement.
Black Annealed Iron Wire Advantages:
(1) Softness and pliability.
(2) Strong breaking strength.
(3) Coated with anticorrosive oil, hard to rust.
Black Annealed Iron Wire Application:
Black annealed iron wire is widely used as tie wire or baling wire in building, parks and daily binding.
Roofing Nails
Roofing nails also called umbrella roofing nail. The material is used by high quality Q195 and Q235 steel wire. The Finish can be galvanized, black, yellow, white, and the shank of the roofing nails can be spiral shank, plain shank, groove shank.
| Products Name | Roofing Nails/ Umbrella Roofing Nails |
| Material | Q195, Q235, iron wire rod or according to request |
| Finish | Polished, electro galvanized, hot dipped galvanized |
| Head | Umbrella head |
| Shank | Twist shank, plain shank, screw shank, twist and plain shank with washer |
| Point | Diamond point |
| Main Market | Ethiopia, Kenya, Nigeria, Ghana, Cameron, Brazil, South Africa, etc |
Roofing Nail Advantages:
(1) Umbrella head is attractive and high strength.
(2) Rubber/plastic washer for additional stability & adhesion.
(3) Twist ring shanks offer excellent withdrawal resistance.
(4) Various corrosion coatings for durability.
roofing nail factory:BEST
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
The palisade fence is popular in British, Ireland. It could take you a safe life, also beautify your living spaces.
The use of post accessories and fittings can better help the mesh and post connection. And it is easy and safe.
Anti climb fence is the ultimate security fencing system. The close mesh is used in prisons and other secure facilities as it is virtually impossible to climb. The close mesh also means that the fence is very difficult to cut with anything but power tools.
Pipingmart.com is a B2B Directory to buy and sell piping products easily. We can help you grow your business in exports and make buyers find suppliers globally.As a seller, you can post you products and find buyers globally. As buyer, you can get direct contact of suppliers which help in buying material with international suppliers.
Steel Pipes and Tubes India are manufacturer, supplier and exporter of stainless steel, carbon steel, alloy steel, duplex steel and high nickel alloy pipes, tubes, fittings, flanges, forged fittings, etc. We supply and export of high quality steel pipes and tubes like seamless pipes, seamless tubes, welded pipe, welded tube, erw pipe, erw tube, efw pipe, efw tube, fabricated pipes and fabricated tubes in India.
STEEL TUBES INDIA is one of the leader manufacturers and exporters of high quality Inconel Pipe Suppliers in india.
Steel Tubes India continues to expand its product line in Inconel Pipe Suppliers to meet the emerging customer needs, and whereas Steel Tubes India is a A Govt. Of India Recognized Star Export House, ISO 9001, 14001, Ohsas 18001 & PED Certified Company and Awarded by Indian Government for Export Excellence for 6 consecutive Years (2006-2007 & 2007-2008, 2008-2009, 2009-2010, 2010-2011, 2011-2012).
INCONEL PIPE SPECIFICATION :
Product Name: Inconel Pipe
Finish: Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Straight lengths: Maximum 65 ft (20 m)
Forms: Straight or ‘U’ bent Tubes
Surface Finish:
16 micro inch Ra (ID 0.4 micron Ra) (as drawn)
4 micro inch Ra (ID 0.1 micron Ra) (electropolished)
We can also cut, thread, and groove Inconel Pipe to meet your specifications.
Inconel Pipe suppliers | ASME SB444 UNS N06625 | B444 UNS N06625 | Alloy 625 Pipe supplier | DIN 2.4856 Inconel 625 | DIN 2.4816 Inconel 600
Inconel Pipe manufacturers in India, inconel pipe tubes supplier, Inconel 625 UNS N06625, ASTM SB444 Inconel 625 Pipe manufacturer, UNS N06625 Pipe, B444 UNS N06625 Seamless Pipe suppliers, B444 UNS N06625 Welded Pipe in Oman, Alloy 625 Seamless Pipe, B444 UNS N06625 Round Pipe suppliers in Malaysia & UAE
CONTACT STEEL TUBES INDIA :
Address: Ashtavinayak Building, Office No.303, 3rd Floor, Sadanand Wadi, V.P. Road, Girgaum, Mumbai-400004, Maharashtra, India
Phone number:+91 22-61432000 (30 Lines), 23895908, 23822821, 66393996
Email ID: stindia@stindia.com, stindia@stindia.co.in
Fasteners Manufacturers India are one of the leading manufacturers, suppliers, exporters, traders, stockist and importers of stainless steel fasteners, carbon steel fasteners, alloy steel fasteners, duplex steel fasteners, high nickel alloy fasteners, inconel alloy fasteners, hastelloy fasteners, monel fasteners, alloy 20 fasteners in Mumbai, India.
asme b16.9 elbow manufacturers
We have specialization to manufacturer customized asme b16.9 elbow per customers’ specifications.Micron Steel and Tubes Supply large amount of High Quality asme b16.9 elbow manufacturer Stock World Wide at Best price. we welcome small quantity order. We are manufacturing ASME B16.9 Pipe Elbow in seamless or welded form, it proudly caters the needs of our customers in Oil & Gas, Power Generation, Petrochemical, and Industrial Construction, inclusive of Upstream, Midstream, and Downstream sectors.
asme b16.9 elbow manufacturer, ansi b16.9 elbow Manufacturer, asme b16.9 pipe elbows dimensions
ISO Certified Suppliers, Exporters, and Stockist of ASME B16.9 Elbow Manufacturer in India. Buy top quality ANSI/ASME B16.9 Elbows Available in All Dimensions at most Reasonable Prices.
Contact Us :
Phone: 022 67439119
Tele fax:022 2380 4268
Email: info@micronsteel.com
10D Pipe Bend Manufacturers
Micron Steel & Tubes is an ISO 9001:2015 / ISO 14001:2015 / OHSAS 18000:2007 / PED Certified Manufacturers and Stockist of 10D Pipe Bends.
We are Global Suppliers, Stockist, and Exporters of High Quality 10D Pipe Bend Manufacturer in India, ASME B16.9 10D Pipe Bends, ANSI B16.9 Buttweld 10D Pipe Bends,10D Bends, Pipe available in all dimensions. 10D Pipe Bends at most Reasonable Prices in India.
What is a Buttweld 10D Pipe Bend?
A 10D pipe bending is a pipe bend that the bend radius is 10 times the pipe outside diameter. 10D means three times the nominal pipe diameter is the bend radii of the piping segment. The 10d bend is used to change the direction of run of pipe. its advantage is can match long distance transition requirements, so it is common that bends dimension according to customer design.
10D pipe bend manufacturer, SS 10D pipe bend Manufacturer, buttweld 10D pipe bends, 10D pipe bend Suppliers, 10D pipe bend Exporters
Contact Us :
Phone: 022 67439119
Tele fax:022 2380 4268
Email: info@micronsteel.com
Micronsteel is one of the leader manufacturers & exporters of high quality Stainless Steel 304 Buttweld Fittings, Stainless steel 304 Pipe Fittings, ss 304 Pipe Fittings, SS 304 Stub End, SS 304 Long & Short Radius Elbow, Stainless Steel 304 Equal Tee, ASTM A403 WP 304 Stainless Steel Buttweld Pipe Fittings, ASME B16.28 SS 304 Buttweld Fittings, Stainless Steel 304 Buttweld Pipe Fittings Supplier in India.
We Micron Steel are creators, merchants and exporters of a wide extent of things Alloy 20 Fasteners that are purposely enhanced to meet market expectations and demands. Alloy 20 is a mix of Nickel, Chromium and Molybdenum and finds use in applications that incorporate Sulphuric Acid. Alloy 20 is resistive to Pitting, Chloride Ion Corrosion and Sulphuric Acid environments. We have imagined a far reaching extent of Alloy 20 Fasteners which consolidate Alloy 20 Nuts, Alloy 20 Bolts, Alloy 20 Studs, Alloy 20 Washers, Alloy 20 Screws, and more.
We are one of the leader manufacturers exporters of high-quality Stainless Steel 304 Fasteners, ss 304 Fasteners, SS 304 Round Bend Hook Bolts, SS 304 Auto Lock Nuts, Stainless Steel 304 Wing Screws, ASTM 193/194 304 Stainless Steel Plain Big Od Washer, ANSI/DIN/BS 304 SS fasteners Supplier in India.
Micron Steel is a manufacturer, trader, supplier and exporter of one of the most widely used Stainless Steel 304 Fasteners. We have built our reputation for many customers in India and Abroad with our broad range of high-quality Stainless Steel, as well as other Alloy products. Stainless Steel 304 is one of the most commonly used grades from the stainless steel family.
Roopam Steel has been a professionally managed stockiest and supplier of Stainless Steel Pipes & Tubes, Welded Pipes, Seamless Pipes, Stainless Steel Sheet, Round Bar, Coils since last two decades. We are capable of providing a vast range of materials, from stock, to suit your needs. From highly specialized non-standard material to off the shelf items, from production to prototype, from low minimums to mill runs, Roopam Steel has the experience to solve your most difficult requirements. With our focus on Superior Customer Service, Premium Quality and Quick Turnaround we are sure you will agree that Roopam Steel is your best source for Steel.
Having established ourselves and set up in the heart of India’s commercial center Mumbai, we have built up adequate stock levels of all essential items within our scope of supply and are in position to offer immediate deliveries.
Our vision is to be the premier supplier of steel solutions around the world, revolutionizing the supply chains of the industries we serve.We do understand that you will be having your respective vendors who will be there for all your needs. What’s in name, Rose will smell as well as now with another name…Its all about characteristics.
OUR VALUES:
Some of the unique values of Roopam Steel’ complete combination for Stainless Steel products: The customer is at the center of everything we do. Complete customer satisfaction – in terms of products, services and punctuality – is our base-line.
A flange is a mechanical device used to connect two pipes or sections of a pipe together. It provides a leak-proof seal and allows for easy assembly and disassembly of piping systems.
As the leading manufacturer of flanges in India, Adfit India is one of the prominent companies in the industry. Adfit India specializes in manufacturing a wide range of flanges, including weld neck flanges, slip-on flanges, blind flanges, socket weld flanges, and more. They are known for their high-quality products, precision engineering, and excellent customer service
We are Manufacturer & Exporter of Pipe Fittings and Flanges in Stainless Steel, Carbon Steel, Alloy Steel Materials from India manufacturer. To Provide quick delivery to our Clients with there customized requirement.
“Allied Metal & Tubes” were established in the year 1993 for manufacturing, stocking & suppling quality products viz. Forged Pipe Fittings & Flanges of various sizes and types in Carbon Steel, Low temperature Carbon Steel, Stainless Steel, Alloy Steel material and supplied under the brand name “Allied Metal & Tubes” to various Chemical, Fertilizer, Petrochemical, Power Generation and Pharmaceutical industries, and used widely in the Piping system for their project jobs and maintenance.
Anand Metals (India), an ISO 9001:2008 certified company, having experience of more then 30 years in Nickel Alloys, Duplex, Super Duplex, & Titanium Industry is now one of the major global distributers of High Perfomance alloys & Corrosion Resistance materials all over india. We are one of the largest Importer, Stockholder & Suppliers of High Perfomance alloys like Inconel, Monel, Hastelloy, Duplex 2205, Super Duplex 32760 & 32750, Alloy 20, 904L, 17-4PH, etc in India.
Anand Metals (India) boasts of a state-of-the-art Supplying a wide range of World Class products, at competitive prices to cater to the diverse and continuously changing needs of its customers. AMI has sales of High Perfomance alloys all over India and aims at continuously expanding its bandwidth by adding new regions and customers.
In Particular, the company continues to develop its excellent reputation in providing quality alloys to safety critical areas such as oil & gas, Petrochemical, Sugar Mills & Distilleries, Fertilizers, Cement Industries, Valve & Automation Industries, Instrumentation Industries, Aerospace, Naval Engineering, Foundries, Power Generations, Offshore, etc.
These Materials are used in various industries like Oil & Gas, Petrochemical, Automobiles, Aerospace & Offshore etc We focus to provide unique solutions and source even the smallest order to meet customer specification. Ours is an ISO 9001:2008 Quality Management System certified company by Ukas.
The following items in wide range of sizes and grades to suit diverse needs are readily available with us in bulk quantities.
A. STAINLESS STEEL: SHEETS, PLATES, COILS, STRIPS IN THE GRADE OF
202 , 304, 304L , 316, 316L , 316TI , 309 , 310 & 410.
B. STAINLESS STEEL: TUBES, PIPES – SEAMLESS & WELDED, PIPE FITTINGS, FLATS, RODS,WIRES, STRIPS IN THE GRADE OF 304, 304L, 316, 316L, 316TI, 309, 310 & 410.
C. PIPE FITTINGS: LIKE ELBOW, REDUCER, BEND, STUBEND, TEE, FLANGE, NUT, BOLT ETC.
* SPECIALIST IN : STAINLESS STEEL SHEETS, PLATES, COILS, STRIPS, FLAT BARS, PIPES ETC. IN ANY GRADE.
Bhawal Steel Agency is a Leading Importers & Exporters of Stainless Steel, Carbon Steel & Alloy Steel Pipes & Tubes, Sheets & Plates, Bar & Wire, Pipe Fitting, Flanges, Nickel Alloy and Non – Ferrous Metals. Bhawal Steel Agency was incorporated by Mr. Mehta and from then onwards a never-ending journey started to reach, satisfy and keep long lasting relationship with our old as well as new clients.
Bhawal Steel Agency is a proactive organisation engaged in supplying of quality products that meet and exceed customers’ specific requirements and thus ensure complete satisfaction. We are primarily engaged in Suppliers, Importers & Exporters of Ferrous & Non-Ferrous Metals
Bhawal Steel Agency has been a professionally managed Importer, stockist and supplier of ferrous and non-ferrous metals. We are capable of providing a vast range of materials, from stock, to suit your needs. We have the experience to solve your most difficult requirements.
Technical Metal Corporation is one of the leading Hex Bolt Manufacturers,Hex Bolts Suppliers,din931 Hex Bolts, hexagon bolts,Stainless Steel Hex Bolt Suppliers, cap screws, hex cap screws, hex head cap screws. Our offered products are manufactured under the supervision of our expert professionals. Products offered by us are highly reliable and appreciated for the amazing performance.Ask for Free sample, these products are available in reasonable price range.
Technical Metal Corporation
Address: 12, Kahan Baug Building.2nd Carpenter Street,Near Nanu Bhai Desai Road Mumbai – 400004.
Phone No: +91-22-67496030
Mobile No: +91-9821071212
Email Id: sales@technicalmetalcorp.com
We are a company with we can do attitude. We are a renowned stockists and suppliers to many leading Indian industries. We have been in the market for more than last three decades catering very stringent quality products. The hallmark of our existence even in the adverse market is our quality supplies and prompts response to the customer’s needs.
Dev Darshan Metal is a dynamic group, which was established over a decade ago to cater to growing demands of stainless steel raw materials. We have a team of young visionaries who end eavour for excellence in every aspect related to our products. As importers, dealers & stockists with huge stocks Dev Darshan Metal become within one of the most reliable source for quality within a short span. We are registered with the best of semi-govt., govt., private & multinational companies. Our aim is to provide our buyers with everything in stainless steel under one roof viz. Dev Darshan Metal.
904l tubes manufacturers in india
SP Metal stocks a wide range of thicknesses and alloys, including marine and aerospace grades, backed by extensive processing facilities, including 904l tubes manufacturers in india & SS 904L Tubes. 904L
stainless steel tubes are readily available in all standard pipe sizes and schedules including Sch 5, Sch 10, Sch 40s and Sch 80s. Stainless steel 904L tubes are available in compliance with ASTM A213, ASTM
A269, ASTM B677, ASTM B673, ASTM B674 in Grade 904L in standard tube sizes and wall thicknesses.
SP METAL
Address : Shop no. 14,Ground Floor, Near by Alankar Theater,KhetwadiI Back Road,Mumbai-4
Hours: Monday – Saturday, 10:00 – 19:00
Telephone: +91-22-66363099 / 6638 1306
Fax: +91 2386 1616
Visit Our site : http://www.spmetals.net