Iron Slag Pot for Steel Mill is an essential container for collecting slag generated during steel making. Iron Slag Pot for Steel Mill is made of refractory steel.
Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
HuaYi Casting Foundry and LianJiang Metals Company are two collaborative enterprises owned and operated by same management team.
-LianJiang Metals Company designs and markets products.
-HuaYi Casting Foundry focuses on manufacturing the products.
Located in Liaoning province in northeastern China, HuaYi Casting Foundry and LianJiang Metals Company have specialized in aluminum and iron casting production since 1997. We are an OEM partnership that manufactures cast aluminum and iron parts for clients all over the world and in different industries such as street lighting, patio furniture & garden decoration company.
With over 20 years of casting work experience and expertise, we offer a full range of casting processes including:
-sand casting
-gravity casting
-die-casting
-vacuum casting
1>The payment term is flexible according to the order quantity, price, and other factors.
2>We have no Minimum Order Quantity (MOQ) limitation on orders. Therefore, you can place your order at whatever size quantity fits your specific needs.
3>Our typical production lead time is about 6 weeks but could be flexible and adjust depending on a customer’s request. Short lead time periods are possible in order to meet a customer’s urgent order delivery need.
4>We will sign a confidential agreement with the customer and will never disclose a customer’s name, designs, or drawings to another other third party.
All related information is protected and secure in our factory.
5>The payment term is flexible according to the order quantity, price, and other factors.
6>We provide customers with prompt after sales services for any quality issue.
7>We have ample capacity to provide the customer with consistent high quality casting work: smooth surfacing, accurate dimensions, and strong mechanical properties.
Our website:http://www.ljmetals.com
Stainless Steel Sprocket Product Description
1. Description: This range of sprockets are made from 304 stainless steel material.
2. Standard: British
3. Feauture:
Corrosion resitance
Good quality
Competitive price
Customized possible
Bath Handle Pull YD-BHP12
Item no.: YD-BHP12
Description: Door Handle Pull
Sanitary Hardware Material: Aluminium/zinc alloy
Size: available, customized
Usage: bath hardware, furniture hardware
Process: die casting, machining, surface treatment
Surface: PVD finished, satin nickel, black, mirror finished, bronze, customized
Model No.: LJJS-CNC-500×600
PRODUCT DESCRIPTION
CNC Corner Connector Automatic Cutting Saw Equipment Features
■ This machine is mainly for alum windows corner stake cutting, also used for cutting Alum & PVC profiles.
■ PLC auto program controlling, man-machine interface is colored touch screen, input the cutting size and quantity, then it can cut automatically.
■ Automatic feeding system take the linear guiderail and high precision ball screw, driven by stepping motor. High feeding precision and efficiency.
■ Saw blade spindle take special high accuracy spindle, end face and radial runout are less 0.01mm, cutting surface is highly polished.
■ Saw blade feeding system adopts linear guiderail, with high accuracy and high speed (can be stepless speed regulation)
■ Carbide saw blade give accurate processing and high efficiency.
■ Special workpiece clamping system, besides processing common corner stake, it can also process middle frame corner stake.
■ All closed machine body and cover, with good appearance, safe working and low noisy.
CNC Corner Connector Automatic Cutting Saw Technical Parameter
■ Power: 380V 50Hz
■ Motor Rate: 2.2Kw
■ Saw Blade Diameter: Φ500mm
■ R.P.M: 2800r /min
■ Cutting Width: 135mm
■ Automatic Profile Feeding Length: 4-600mm
■ Working air pressure: 0.5－0.8Mpa
■ Weight: 600kg
If you want to know more, you can click here.
Model No.: LJZ2 -450×3700
PRODUCT DESCRIPTION
Double Head Cutting Saw Equipment Feature
■ Used for aluminum profile cutting.
■ Carbide saw blade give accurate processing and high endurance.
■ The two heads can work independently and simultaneously.
■ Cutting off the required length and two end angles is available by one time processing
Double Head Cutting Saw Technical Parameter
1) Power supply: three phase, four line 380V, 50Hz
2) Saw motor: 1.5Kw x 2, 2,800r/min
3) Pulling motor: 0.55Kw, 1,400r/min
4) Working pressure: 0.4 – 0.6MPa
5) Air consumption: 200L/min
6) Cutting length: max 3,700mm; min. 400mm
7) Cutting width: max 120mm
8) Cutting height: max. 200mm
9) Cutting angle: 0° – 45°
10) Cutter feeding speed: 0 – 3m/min
11) Saw diameter specification: 450mm x 4mm x 30mm-120
12) Overall dimensions: 4,500mm x 1,100mm x 1,400mm
Processing Accuracy
■ Repeat locating length: ≤0.2mm
■ Cutting angle allowance: ±5′
■ Cutting profile surface planeness: ≤0.10mm
■ Cutting profile surface roughness: Ra12.5μm
If you want to know more, you can click here.
Anping TianHui Wire Mesh Products Co., Ltd. is located in anping county, Hebei province, which also be called “Hometown of wire mesh”in china. Started the factory from the year 1986, We are one of the top manufacturers and exporters of Woven wire Mesh, Screens and welded Wire Mesh in China.
We has over 160 sets of wire mesh machines, have around 20000 rolls in stock for stainless steel wire mesh & welded mesh. We have gained a global sales network reaching to the Local market, USA, Middle-East, Europe and Africa etc.
Our company has been based on “good quality, timely delivery, reasonable price, considerate service” the purpose to serve the masses of customers; And is in line with “quality seek survival, prestige seek development” production principles, in our emphasis on product quality at the same time, also actively communicate with the customer, understand customer needs, to realize our shortcomings, and for clients to provide professional and timely after-sales service, won the praise of the vast old and new customers. Our products are widely used in petroleum, textile, metallurgy, construction, farming, machinery, landscape protection, production and manufacturing, and other fields.
Our Main Products: Stainless Steel Wire Mesh, Shale Shaker Screen, Crimped Wire Mesh, Dutch Wire Mesh, Copper Wire Mesh, Brass Wire Mesh, Stainless Steel Welded Wire Mesh, Galvanized Welded Wire Mesh, Filter Discs And Wire Mesh Processed Products.
TIANHUI Sincerely hope to establish long term business relationship with worldwide customers on the basis of sincerity and mutual benefits.
We use a variety of advanced equipment including shears, CNC punching machines, laser cutting machines, composite machines, bending machines, hydraulic presses, and various auxiliary equipment such as uncoilers, leveling machines, deburring machines, spot welding machines, etc., Using cutting, stamping, drawing, bending, welding, riveting and other processes, we can manufacture various Wonderful custom sheet metal products of different shapes for you, and can also do surface treatment for the products, including painting, electroplating, wire drawing, etc.
If you need sheet metal fabrication service we are one of the most capable and affordable sources and we can get the job done right.
At Wonderful, we use advanced equipment to provide you with various exactness cnc machining service, including milling, turning, EDM, wire cutting, EDM and so on. Using our 3-axis, 4-axis and 5-axis CNC machining centers, our skilled machinists can use a variety of plastic and metal materials to manufacture turning and milling parts. Our CNC machining center can not only produce perfect samples for you, but also customize more small batch products for you, making us a one-stop service provider for your advanced design and small batch product needs.https://www.wdfprecision.com/
Introduction
pre disposal waste aluminum is a common name for recycled aluminum.
After pretreatment, part of the recovered aluminum will be cold-processed to turn it into powder aluminum, while the other part will be recycled by means of heavy medium dressing and parabolic dressing.
recycled aluminum Processing method
The purpose of the pre-disposal of waste aluminum is to get rid of other metals and impurities mixed in the waste aluminum; to classify the waste aluminum according to its composition, so that the alloy components in the waste aluminum can be used to the maximum extent; and to dispose of the oil, oxide and paint on the surface of the waste aluminum.At the end of the pre-treatment, the waste aluminum is disposed into the burden suitable for the furnace conditions, and the fourth is to make the aluminum (including alumina) that is guessed correctly by the waste aluminum get the most economical and reasonable use.
The pre-disposal skills of ALUMINUM SCRAP supplier are very brief and backward. Even in large recycled aluminum plants, the pre-disposal skills of waste aluminum are not relatively advanced.In terms of the disposal method for recovery and recycling of waste aluminum of a single type, waste aluminum of a single type or no other impurities is usually not pre-disposed in a disorderly manner, but only classified according to the type and composition of the waste and accumulated independently.A single type of aluminium scrap when use only check assay gives a composition, can know the composition of batch, is high-quality recycled aluminium material, usually need not to make any advance disposal charging melting, in a certain aluminum alloy melting, can choose the corresponding components and types of aluminium scrap directly participate in reverberatory furnace smelting, and can be easily melting into the corresponding trademark of aluminum alloy.Some waste aluminum containing high copper and zinc can also be used as the central alloy for adjusting the composition of aluminum alloy in the smelting process.In the enterprise that chooses small reverberatory furnace or crucible furnace, want to want according to need to break large volume waste aluminium (shear or other method) the material that accords with furnace standard is quick.It is worth mentioning that a small number of non-aluminum metals will be mechanically contained in some single type of China scrap aluminum, such as scrap steel parts such as screws on the Windows and doors of scrap aluminum, although the content is very small, but will seriously affect the quality of the alloy, so it must be separated before smelting.
Heavy medium dressing
That is, the method of heavy media heavy selection is used to separate the heavy non-ferrous metals, such as copper, whose density is higher than that of aluminum, which USES the principle that the density of aluminum is smaller than that of other heavy non-ferrous metals, so that the waste aluminum floats on the medium, while the heavy non-ferrous metal sinks on the bottom, achieving the purpose of separation.But the key is to screen a medium that is denser than aluminum and less than copper, and that medium is not water or any other liquid, definitely a fluid.When the fluid is doing reciprocating motion, the waste aluminum is floating on the top of the medium is separated.
metallurgical accessories Parabolic dressing
By using the principle that objects of basically the same volume fall at different points when they are thrown out by the same force, various waste non-ferrous metals with different densities in the scrap aluminum can be separated.When the same force is used to shoot an object with different density but basically the same volume along a straight line, various objects move along the direction of the parabola and have different landing points.The simplest experiment can be carried out on a horizontal conveyor belt. When the mixed wastes run at high speed along the conveyor belt, the waste aluminum is thrown out along a straight line at the end of the operation. Due to the different gravity of various wastes, the waste aluminum falls to the ground at different points, so as to achieve the purpose of waste aluminum separation.In this way, recycled aluminum, copper, lead and other wastes can be separated evenly.The equipment manufactured according to this principle has been adopted in foreign countries and is in the research stage at home.
Welcome to Exotic Metal Alloys. We are stockist & suppliers of Nickel & Nickel Alloys in Round Bars, Sheets, Plates,Pipes,Tubes & Wires. In grade of Monel, Inconel, Incolloy ,Hastelloy & other Nickel Alloys according to ASME/ASTM, DIN and other known determinations.
Versatile Overseas Is An ISO 9001:2015 Certified Company And Has A Track Record Of Offering A Wide Range Of Piping Solution At Very Competitive Prices. In A Very Short Period Of Time, We Have Gained An Excellent National And International Reputation.
Shahe Golden Deer Trading Co.,Ltd is founded on 15th July 2019, locates at Shahe City Hebei Province where is known as The China Glass City.
Around us, there are 107 national road, highway connecting Beijing and Zhuhai, railway joint with Beijing and Guangzhou. It is very convenient to reach the airports of Handan, Shijiazhuang, Zhengzhou and Beijing.Our goods can be shipped to direct to the ports of Tianjin, Qinhuangdao, Qingdao.
Among the cities of Shijiazhuang, Xingtai and Handan, we have a strong and solid industrial base where have so many mature and full- fledged industries.Our exporting business scope covers all of these local special products such like glass and glassware, mechanical parts, auto spare parts, bicycle, tiles, building materials, pet food and fast noodles.Besides, we have millions of population here,circulation goes fast.This gives us huge potential market of importing commodities from abroad.
More information about Golden Deer, please via:https://www.cerfdor.cn/
Kingsun New Material Technology Co., Ltd. is located in Lianhua Industrial Park, Pingxiang City, Jiangxi Province, covering a total area of about 200,000 square meters. with a registered capital of 50 million RMB and a designed production capacity of 50,000 tons, the factory was established in 1999. For more than 20 years, it has focused on the research and development, production and sales of non-ferrous metal “casting auxiliary materials“, and is a professional manufacturer of aluminum casting auxiliary materials. Customers for aluminum plate, tape, foil, rod, cable and aluminum ingots, aluminum castings and other aluminum processing enterprises.
At present, we total have 208 workers, four production chain industries, mainly aluminum casting auxiliary materials, specifically divided into: high purity chromium metal series, aluminum flux series, Aluminium alloying tablets series ,aluminum base intermediate alloy series, grain refiner series, foam ceramic filter plate series, total five series and several varieties. All products are dedicated to aluminum processing and casting industry to provide services. The company has sales and service offices in Shanghai, Jiangsu, Zhejiang and Guangdong, and exports to more than 30 countries and regions such as the United States, the United Kingdom, Germany, Italy, Japan, Turkey and Southeast Asia.
More details please contact: http://www.kingsunmaterials.com
PTH, headquartered in Keqiao District of Shaoxing City, has more than 200 emplyees and a long history. In 1998, PTH began to produces steel structureal parts. In those 10 years, PTH production emphasis has gone through the transformation from the production of door and window fittings to the protecting system of houses, then turns to the building structure , and finally upgraded to integrated housing production. After ten years efforts, the first container house was finished and exported to New Caledonia in 2008. Meanwhile,PTH gradually becomes a leader in the Steel Structure industry. Now, its main products can be divided into four categories, which are steel structure building, light steel villas, container house and Double-C Structure. The annual production capacity for different types of buildings can reach 500,000 square meters.
With more than 40 years of experience and 4 manufacturing units, Multinox Inc is the most trusted and well-known manufacturer & exporter of Bars & Rods, Pipes & Tubes, Fasteners Precision Turned Components, CNC Turned Components, VMC Turned Components, CNC Machined Components for various industries like automotive, aerospace, defence, hydraulic, lighting etc.
We have all molds of Thailand S expanded metal,the metalmeshcorp gothic mesh hole pattern looks nice and is a good choice for decoration and architecture.The surface finish including powder coated and galvanized,standard sizes 4ftx8ft.
How to Order S Expanded Metal ?.
When ordering or specifying Expanded Metal wholesale , please confirm:
The Style
Flattened or Raised
Material
Sheet Size
Example: Expanded Metal S-18 Flattened,carbon steel, standard 4′ x 8′ sheet.
Features of Standard S expanded metal
Smooth surface. It supplies a safe and smooth surface, which will not hurt people.
Corrosion and rust resistance. Various surface treatment and aluminum, stainless steel materials have outstanding chemical stability.
Lightweight. The Sexpanded metal sheet is lightweight and it can save materials and freight costs.
Easy to install and uninstall. The installation of S expanded metal sheet is easy and no need any special tools.
Application of Hot Dipped Galvanized Expanded Metal Mesh:
Architectural applications include ceiling panels, fencing, partitions, speaker grilles and store displays.
Some decorative applications include interior and exterior design facades, screening, sunshades, building cladding and ceiling and wall lighting.
As the most valuable subsidiary under SHINESTAR STEEL GROUP, PRIME STEEL PIPE is the solution provider for steel pipes and fittings. We are dedicated in providing high performance-price ratio steel pipes and fittings for the oil, gas, construction, energy and petrochemical industries. In prime steel pipe, we believe honest communication, expertise in steel industry, and prompt execution lead to strong long term relationships. Our professional team provides “one-stop procurement” service to coordinate with clients projects regulation, site and terrain. We ensure the best quality of products by assigning skillful experts at every stage of activities. To keep the honesty in mind, to win reputation by trust is our principle.
1958-1990 Hebei XINYU Welding Co., Ltd.
1991-2004 DONGGANG Welding Materials Co.,Ltd, which was founded by Hebei University of Technology and Hongkong Community Service Center,mainly produces High antirust CO2 gas-shield welding wire, Submerged arc welding wire, Stainless steel welding wire & Flux-cored welding wire.
- Now Hebei XINYU Welding Co., Ltd, which mainly produces high strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire . Our products are widely applied to the welding of low-alloy high tensile large & key steel structures in coal machinery, construction machinery, petrochemical machinery, pressure vessels or tanks, oil & gas pipelines, military industry, shipbuilding, bridge and high-rise buildings etc. At the same time,we are the only interprise in the domestic which produces welding wire as well as welding wire equipment.
All our products have passed ISO 9001-2015 quality system certification and CE certification because of our advanced production lines, top professional testing equipment, intelligent R&D team and scientific management system. Meanwhile, we get 7 invention patents including a national one. We are a member of China Mechanical Engineering Association and China Welding Association. Other honors are ” Consumer Trusting Products in Hebei province” ” Famous Brand products in Hebei province” ” Good Credit Enterprise in Hebei Province” and “China Key &Leading Enterprise in high tensile steel welding wire”.
Our Welding wires and welding wire equipment are exported to USA, Italy, Brazil, Russia and India etc.
Welcome you to our factory any time.
Tube Lok is a renowned manufacturer, exporter and supplier of a wide range of carbon steel, alloy steel, mild steel products such as pipes, tubes, tubing, boiler tubes, seamless pipes, seamless tubes, welded pipes, welded tubes, Heat Exchanger Tube, ERW Pipes.
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main-line. It is a short piece of pipe with a lateral outlet. Pipeline Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings, widely used in pipe networks for conveying liquids and gases.
How many types of steel pipe tee?
According to material types there are:
Carbon Steel Pipe Tee
Alloy Steel Tee
Stainless Steel Tee
According to branch diameters and functions there are:
Equal Tee
According to connection types are:
Butt Weld Tee
Socket Weld Tee
Threaded Tee
Carbon Steel Tee VS Alloy Steel Tee VS Stainless Steel Tee
Carbon Steel Tee
Carbon steel tee material: ASTM A234 WPB, WPC; MSS SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, 60, 65 and 70.
ASME/ANSI B16.9 for butt weld tee fittings,
ASME/ANSI B16.11 for socket weld and threaded tee fittings.
Alloy Steel Tee
Alloy steel material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
Stainless Steel Tee
Stainless steel standards: ASTM A403 (common standard for stainless steel pipe fittings.
YARONG is leading supplier, exporter & manufacturer of pipe fitting tee in China. Our products are mainly exported to Korea, Japan, the United Arab Emirates, Saudi Arabia, Egypt, the United States, Australia, Singapore, Indonesia, Middle East countries.If any problems occur during the production process, we will be very honest and communicate with you to find a solution together.
HuaYi Casting Foundry and LianJiang Metals Company are two collaborative enterprises owned and operated by same management team.
-LianJiang Metals Company designs and markets products.
-HuaYi Casting Foundry focuses on manufacturing the products.
Located in Liaoning province in northeastern China, HuaYi Casting Foundry and LianJiang Metals Company have specialized in aluminum and iron casting production since 1997. We are an OEM partnership that manufactures cast aluminum and iron parts for clients all over the world and in different industries such as street lighting, patio furniture & garden decoration company.
With over 20 years of casting work experience and expertise, we offer a full range of casting processes including:
-sand casting
-gravity casting
-die-casting
-vacuum casting
1>The payment term is flexible according to the order quantity, price, and other factors.
2>We have no Minimum Order Quantity (MOQ) limitation on orders. Therefore, you can place your order at whatever size quantity fits your specific needs.
3>Our typical production lead time is about 6 weeks but could be flexible and adjust depending on a customer’s request. Short lead time periods are possible in order to meet a customer’s urgent order delivery need.
4>We will sign a confidential agreement with the customer and will never disclose a customer’s name, designs, or drawings to another other third party.
All related information is protected and secure in our factory.
5>The payment term is flexible according to the order quantity, price, and other factors.
6>We provide customers with prompt after sales services for any quality issue.
7>We have ample capacity to provide the customer with consistent high quality casting work: smooth surfacing, accurate dimensions, and strong mechanical properties.
Our website:http://www.ljmetals.com
PEILING TECH. based in Hebei province of China and established in 2007.
We have set up our competitive advantage in the world market like garden hardware products/ fence system products / pet products and so on. Professional team, scientific management system, all of which have guaranteed us the leading position in garden field, our main market are America, Europe and Australia.
Our enterprise spirit are” focus, professional, innovation, customer first, sustainable development.”, exactly as” Specialty, Creative, Service “. We insist that” High quality is company’s greatest repayment; satisfaction of customer is the ultimate aim of us”. We devote to help our customers to be the best in their own market with our most competitive products and best service.
Our company specialized in Kennel, Wire Mesh, French Gate, Bar Gate, Entrance Door, We offer customized services, please via:https://www.peilingtech.com/
Hook Strip Flat Screen is one of the most commonly used screen,can be widely used in drilling operations under different conditions.
Hook Strip Flat Screen is constructed with two or three layers of stainless steel wire cloths bonded to a steel support plank.This kind of sieving screen has many characteristics as follows:
- Every wire cloth in the sieving screen has different meshes,and accurate collocation can make the screen have better effect. In the sieving screen with different meshes,the hole size of support plank is different,so as to get the most effective area on the condition of bearing enough force.
- The Stainless steel wire clothcombines steel support plank into a single closely,so as to enhance the strength of the whole screen and prolong its life.
- The wire cloth is divided into independent small surface by the gird of steel support plank,which can prevent excessive expansion of local damage.At the same time,equipped with a special rubber plug to repair damage,it can save tine and reduce the cost.
Hengying has rich production experience and mature technology, we can produce a variety of specifications hook strip flat screen according to the different needs of customers.
Yoobond Service Team Provides the one-stop Solution for Primary Services needs of its sale and after-sales subdivisions.Updated suggestions and information will be provided to customers in time.
Yoobond Management team strictly follows the ISO9001:2008 Standard system,We have a series of executive sequences a more effective service supply chain to our customers consistently.
Yoobond R&D team is staffed with trained professionals that could help customers find solutions for new composite panels and General feedback . New developing products such as Special surface for Aluminum composite Products,Aluminum PVC foamed Composite panels. Aluminum MDF Composite Panels,metal composite panel and FRP PP Honeycomb composite panels which from sourcing qualified raw materials and improving the Composting production processing.
Material: 304, 304L, 316, 316L, etc.
Weaving Pattern: Plain weave and twill wave.
Performance: Excellent resistance against acid,alkali heat,pull and wear.
Stainless Steel Wire Mesh General Use: Mud net for the oil industrial,filter screen for electroplating industrial,they all have excellent performance.
Our factory can design and manufacture various products to meet the need of user and accept customers materials for processing.
美国联合钢铁工业有限公司（USI Group）是中国最大的钢管集团之一，成立于1989年，海外总部位于新加坡，国内总部位于中国江苏省苏州市苏州工业园区。
USI集团拥有20个分支公司，总资产：10亿美元，员工10000多人，以及6个工厂（分别位于天津，苏州和沧州市），用于生产电焊管（ERW，SSAW和LSAW），无缝碳钢管，镀锌焊接管，方形/矩形钢管，不锈钢管/盘管/板/片，管件，法兰等。
我们先进的设施以及在生产的各个阶段均具有出色的质量控制，可确保产品质量，因为由于我们优质的产品和出色的客户服务，我们赢得了客户的满意并在油气管道行业中享有良好的声誉，我们的客户包括PDVSA，NIOC，中石化，中石油等。
Hebei Fuhua Wanshixing Hardware and Wire Mesh Products Co., Ltd. was established in 2006, has 15 years of history. Our Company covers an area of 33000㎡. There are more than 10 sets razor barbed wire making machines.
Hebei Zhuocui Trading Co., Ltd For Hebei Fuhua Wanshixing Hardware and Wire Mesh Products Co., Ltd. Shijiazhuang office,Our company owns a group of technician and workers specialized trained.The main products: Razor barbed wire, Wall spikes, Chain link fence, Steel grating, Mobile security barriers, temporary fence, etc. Our quality management system has been successfully approved by the ISOQAR to the standard ISO9001:2000.
All the products are exported to Europe, America, Middle East, Southeast Asian and so on. These products enjoy a good reputation from our customers at home and abroad.
Hebei Fuhua Wanshixing always adhere to the principle of “Sincerity First, Customer First”, and strictly complete each order according to customer requirements, ensuring the quality and quantity.
Standard Reference: AS1085.10-20002, DIN, ISO-9001
China Rail Anchor Surface Treatment: Plain / Oxide Black / Zinc Plated / Normal Painting / Sandblasting, etc
Raw Material: 60Si2MnA / 45# / QT500-7
Production Engineering: Forging ,Casting
Our company supply track fasteners, which include rail clamp, rail anchor, rail clip. Our products have high quality and competitive prices, please feel free to contact us.