Glued Steel Fiber, an alternate concrete reinforcing material are high tensile steel wires with hooked ends, glued together by the water-soluble adhesive for compactness and uniform dispersion in concrete, to increase the concrete properties by 3-4 times.
steel fiber reinforced concrete supplier improve the mechanical properties concrete and materials such as ductility,
energy absorption, fatigue, and toughness. This fiber helps to controls plastic shrinkage cracking in concrete; helps reduce or eliminate need for conventional reinforcement.
Application of Glued steel fiber reinforced concrete
- For concrete flooring
Industrial floors
Joint-less floors
Floors-on-piles
Lightly loaded floors
Liquid tight floors & composite metal decking
- stainless steel fiber supplierFor Hard Standing & Heavy Duty
Parking lots
Playgrounds
Airport runways
Taxiways
Maintenance hangers
Access roads & workshops
Ports& Containers for port pavements
Container terminals
Bulk storage areas access roads
For army tank movement
- steel fibers for concrete reinforcementOther Applications
Foundations
Traditional cellar and basement walls
Compression layers
Tunnel engineering
Compared with the GuangYa loose steel fiber the operation and advantages of the glued steel fiber:
- Add the steel fiber directly into the belt, the whole row of steel fiber as a whole, evenly dispersed in the concrete corner
- The water-soluble glue begins to dissolve in a row of steel fibers in the premise of the dispersion, it is again dispersed in every corner of the mono filament fiber, showing the perspective in the concrete of the fiber mesh, which plays an integral strengthening.
- Compared with mono-filament fibers, China bonded steel fiberswill not be bundled to ensure that the fibers in concrete do not coalesce and distribute evenly.
Glued steel fibers are loose hook-end fibers that are bonded together in a row. The great difference between loose fiber and glued fiber is that the former is easy to clog and the latter is easy to disperse evenly.
Saarstahl AG, with its locations in Völklingen, Burbach and Neunkirchen along with Roheisengesellschaft Saar in Dillingen (Saarstahl and Dillinger Hütte each with 50 %) is one of the most important manufacturers of long products in the world. The company is recognized as having a high level of competence in the field of steel production and further processing.
Saarstahl AG specializes in the production of wire rod, steel bars and semi-finished products of various grades. The product range also includes open die forgings. These products are important preliminary products, both today and for the future, for the automotive industry and its suppliers, the construction industry, power industry engineering, the aerospace industry, general mechanical engineering and other steel processing branches.
Our subsidiaries Saarschmiede GmbH Freiformschmiede, Saar-Bandstahl GmbH and Drahtwerk Luisenthal GmbH, Völklingen, along with Saar-Blankstahl GmbH, Homburg, Drahtwerk St. Ingbert GmbH, St. Ingbert, DWK Drahtwerk Köln GmbH, Köln, and Secosar Etirage S.A.S., Lyon, and Conflandey Industries S.A.S., Conflandey, are leading companies in their product fields. Our sales organizations which operate world-wide can be found in Germany (Völklingen and Düsseldorf) as well as in France, Great Britain, Belgium, Italy, Switzerland, USA, China, Malaysia, Turkey, Czech Republic, Slovakia, Poland, Rumania and Hungary.
The numerous certificates and awards obtained document the fulfilment of customers’ high quality standards.
Our high standards are confirmed by the company’s certification according to DIN EN ISO 9001 and ISO/TS
16949 and according to the environmental audit ISO 14001.
Uralskiy zavod pretsizionnykh splavov ZAO (UZPS ZAO) is a Russia-based plant, the main activity of which is the manufacture of precision alloy, steel, mill products, semi-finished products and other consumer goods from precision alloy. UZPS ZAO is also involved in the manufacture and realization of black and non-ferrous metallurgy products and the processing and realization of iron-and-steel and non-ferrous scraps. The Company sells its products on the domestic market, as well as exports them to Kazakhstan, Azerbaijan, Uzbekistan, Tajikistan, Turkmenistan, Belarus, Poland, Germany, Serbia, Slovakia and Italy. In addition, it has one representative office located in Moscow and one subsidiary, TD UEMZ Metiz OOO. UZPS ZAO is headquartered in Berezovskiy, Russian Federation.
Valbruna Stainless Steel is a privately owned company which produces over 170,000 tons of high quality special steel, maintaining the original business strategy of serving niche markets with high quality products and providing customers with top notch services and dedication. The Valbruna Stainless Steel production is focused mostly on stainless steel and special alloys today, with a dedication towards satisfying even the most sophisticated demands of the market and constantly keeping their production techniques and “know How” up to date.
Valbruna has over 50 years of experience with laminated and forged bars and the production line is constantly growing and evolving. Production is currently conducted in two factories, one in Vicenza and the other in Bolzano.
Wire To Wire Manufacturing was established and commenced production operations in the year 2000. Our list of satisfied customers has quickly grown and ranges from many small businesses, to large grocery chains and major department stores.
We primarily manufacture from steel wire, rod, sheet metal, and tubing. We add wood and plastics as they are required and offer an epoxy, lacquer, porcelain, chrome or plated finish. Production capabilities are very diverse supplying customers ranging from retail display, to original equipment manufacturers, to the after-market, and our decorative wrought iron home product line.
Management and key employees in the business have in excess of 50 years experience in the design and production of wire and metal fabrication products. This extensive experience assists our company in high productivity levels and low material waste. Combined with our moderate overhead rates, we are in a position of having a price competitive advantage over our competition.
Customer satisfaction comes first at Wire To Wire. We look forward to answering any questions you may have.
SMT Machines (India) Limited is an ISO 9001-2008 certified company and a Government of India Recognized EXPORT HOUSE, a well – organized & well – equipped Engineering Company situated on the G.T. Road (Near Industrial Focal Point), Mandi Gobindgarh, Punjab (India), one of the place consisting maximum number of Steel Producing Mills in Asia.
We are basically catering to the needs of the Steel Mill Industry with our services ranging from Engineering, Consultancy, Design and Development, Manufacturing & Exporting Highly Economical and cost effective Steel Rolling Mill Plants on Turnkey Basis. The Machining & Material Handling Capacity available up to 50 M.T. enables SMT to provide Engineering Assistance to Total Steel Making Industry for Hot Rolling, Cold Rolling, Pipe Plants (ERW, G.I., A. P. I. Grade) and Spares for Sugar & Cement and other Industries by way of manufacturing the Mechanical Equipments to customer’s design and specifications.
Acindar Industria Argentina de Aceros SA (Acindar) is a Argentina-based manufacturer of the steel products. The Company operates through three business divisions. The steel business division provides billets, concrete-reinforcing bars, wire, laminated bars, ground and drawn steel for construction, standard stirrups, standard and special mesh, structural elements, welded wire beams, nails, pre-stressed strands, steel fibers for concrete and hot-rolled and cold-rolled steel shapes. The tubes business division manufactures a wide range of black welded tubes, galvanized pipes and coated tubes, as well as tubes for transporting gas and petroleum, for transporting water and other fluids and for structural and general use. The wires business division produces and markets ungalvanized wires, black wires, galvanized and annealed wires, spring wires and wire mesh. In April 2007, it announced a merger with Elmec S.A. and Performa S.A. Acindar is a member of ArcelorMittal Group.
Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
Sterling Wire Mesh And Belt Factory is a professional manufacturer and exporter of series wire mesh products. This company is located in South Industrial Park of Anping which is well known as Wire Mesh Land of China, enjoys convenient transport condition being close to Beijing, Capital City of China and Tianjian, one of the most important seaport in North China.
Our company has advanced production equipment, first-class technology and complete quality management system. We mainly produce and supply the following products: Fencing Wire Mesh, Welded Wire Mesh, Welded Mesh Panels, Hexagonal Wire Netting, Window Screening, Stainless Steel Wire Mesh, Galvanized Wire, Cut Wire, Barbed Wire, Razor Barbed Wire, Wire-drawing Machine, Hexagonal Wire Netting Machine, Electric Welded Net Machine, Barbed Wire Machine, Razor Wire Machine, Metal Wire Screen Weaving Machineother wire mesh products. Dozens of various kinds in about one thousand specifications. Besides supplying the domestic market, we have also established good business relationship with many countries such as European countries, the USA, Middle-east, Southeast Asia and some other countries and regions.
We follow the policy of Reliable Service, Good Quality and Customer Satisfaction in business. We would like to cooperate with friends home and abroad and to provide quality products and services for worldwide customers. For more information about our company or services, please feel free to contact us.
VSL is one of India’s leading manufacturers of MS ERW Black and Galvanised Pipes, having a capacity of 7500 TPA, in a size range of 1/2″ to 4″ (15 mm to 100 mm), in light and Medium class, as per IS: 1239 (Part-I) 2004, BS 1387/85, BS 1139 and DIN specifications, suitable for various industrial and household applications.
VSL also produces Precision Tubes made of CRCA, to meet the needs of the Automobile Industry and the General Engineering Industry. Vallabh Steels is renowned across the globe as a leading exporter of Galvanised Pipes from India, having attained Export House status from Government of India.
Apart from tubes, VSL produces CR Coils and Stips in varying widths of up to 1020 mm, and with a thickness ranging from 0.14 mm to 3.00 mm, catering to the precise requirements of the Automobile Sector, White Goods Sector and the General Engineering Industry.
Vishal Pipes Limited an ISO 9001 & 14001 Certified Company takes immense pleasure in introducing itself as one of the leading names in the Engineering Industry having Integrated Steel Complex with modern integration to produce ERW Pipes in Round, Square, Rectangular shapes, Scaffolding Pipes, Conduit Pipes (Black and Galvanised) & PVC Rigid & Conduit Pipes in the most modern State of the Art plant located at Sikandrabad U.P. (32 Km. from Delhi).
The organisation has pioneered its operations in 1989 to produce ERW Black Steel Pipes, Galvanised Steel Pipes & PVC Pipe / Tube Scaffolding Tubes PVC Pipe Fittings, Malleable Iron Pipe Fittings and Hollow Sections. Since then the company has held a commanding position in the construction industry and has not only tapped the premium segment of domestic market but has also earned name in the international markets where the company’s products are exported.
VPL brand is not only into Pipes, but we have also diversified into other fields as well, like Structural Steel, Scaffoldings, Malleable Iron fittings, Hinges, Hand Pumps, Nuts & bolts, Footwear etc. There are different individual companies under a common umbrella, each dedicated to a specific line of product manufacturing, procuring or other particular business activities.
Shanghai Bao Zhuo Trade Development Co., Ltd. in steel spot trading, export and distribution of steel as the main business, mainly engaged in domestic major steel rebar, wire rod, hot rolled steel plate (volume), marine steel plate (coil), galvanized sheet (Vol. ), cold rolled coils and steel materials used in construction and urban drainage ductile pipe and other products. At the same time customers can provide packing, commodity
Established in 2009(the predecessor is zero-one company) , Baozhuo Trade Development., Ltd ,with paid-up capital of RMB30 million, is a professional export trading company combining processing, distribution and logistics together, and mainly engaged in steels,. We are mainly engaged in Deformed steel bar, hot rolled steel coils, plates and bars, galvanized coils and sheets, ship building plates as well as other related steel materials. So far we have built good co-operation relationship with many well-known iron and steel enterprises and mills, which are Bao steel, Wuhan Iron and Steel, Laiwu Steel, Tangshan Iron and Steel, Anshan Iron and Steel, Maanshan Iron and Steel, Handan Iron and Steel, Sha steel, Tiantie steel etc.
The company is the only major steel enterprise in Xinjiang, is one of the only two iron and steel production bases in Northwest China. The company is mainly engaged in iron and steel smelting, rolling, processing and sales, production of steel are carbon steel, steel, welding steel, cold-rolled sheet, painted and galvanized sheet and other varieties, the products accounted for more than 70% market share in Xinjiang. In recent years, the company products in the Lanzhou-Xinjiang Railway and the Qinghai-Tibet…
Exporter, supplier and manufacturer of stainless steel fasteners, industrial stainless steel fasteners, steel bolts, steel nuts, steel washers,
The Company was incorporated as a Private Limited Company in 18th December, 1990 having its registered office in the state of Andhra Pradesh under name & style of ‘’Aditya lspat Private Limited” by registrar of the Companies , Andhra Pradesh. The Company was subsequently converted into a Public Limited Company with a fresh certificate of incorporation issued on 15th May 1992.
Ped certified manufacturer of PTFE COATED fasteners like bolts, nuts, washers, threaded rod. Materials included inconel, monel, hastelloy, duplex and super duplex steel fasteners. Xylan Coating, PTFE coating dacromet coating is our speciallity.
Since the past few years we have expertise in all exotic grades of fasteners meeting custom requirements if our esteemed clients varying from aeronautics to general purpose applications.
Fasteners are a crucial part of our manufacturing line.
Our manufacturing range in metric sizes ranges from m1-m150
and imperial size ranges from 1/4″-6″ and #1-#20 in numeric inch series.
some of the most known fasteners are mentioned below
Stainless steel fastener range are manufactured in the following grades
- 410 stainless steel fasteners used for martensitic applications
- 304 stainless steel fasteners used for general purpose applications
- 304l stainless steel fasteners used for cryogenic applications
- 309 stainless steel fasteners used for high temperature applications
- 310 stainless steel fasteners used for high temperature applications
- 316 stainless steel fasteners used for corrosive environments
- 316l stainless steel fasteners used for sea water applications
- 317l stainless steel fasteners used for corrosive environments with high temperature applications
- 321 stainless steel fasteners used for high temperature applications
- 347 stainless steel fasteners used for high temperature applications
- 348 stainless steel fasteners used for high temperature applications
- a286 fasteners used for high temperature applications like aerospace.
Apart from stainless steel we also produce alloyed stainless steel fasteners which are expensive as compared to austenitic and martensitic stainless steel known at nitronic stainless steel below are the grades mentioned.
for high temperature applications, a cheaper alternative as compared to nickel alloys are nemonic alloys mentioned below.
For corrosive environments we produce monel fasteners namely
Corrosion and high temperature resistance both can be achieved in the below inconel fasteners.
- inconel 600 fasteners
- inconel 603 fasteners
- inconel 602 fasteners
- inconel 601 fasteners
- inconel 625 fasteners
- inconel 617 fasteners
- inconel 718 fasteners
- inconel x 750 fasteners
- inconel 686 fasteners
high temperature fasteners generally used for aeronautics are mentioned below.
high temperature plus high corrosion resistant hastelloy fasteners are manufactured in the following four grades at torqbolt
99% pure nickel based fastners used for special applications.
titanium and aeronautics have a very old relation and particularly in the following 2 grades.
if better corrosion resistant fasteners are required as compared to stainless steel, silicon bronze and copper nickel is used.
high temperature alloy steel available at cheaper rates as compared to nickel alloys.
Super high austenitic and precipitation hardening stainless steel grades
- 330 stainless steel fasteners
- 904l stainless steel fasteners
- 254 smo fasteners
- alloy 20 fasteners
- 17 4 ph fasteners
- 15 5 ph fasteners
- al 6xn fasteners
Dual Phase stainless steel fasteners with high prep ration used for extremely corrosive environments with high toughness,
- duplex 2205 fasteners
- duplex s31803 fasteners
- duplex 2507 fasteners
- ferralium 255 fasteners
- super duplex s32760 fasteners
- s32520 fasteners
Nevatia Steel & Alloys Pvt. Limited, the first Indian stainless wire company to have triple certification of ISO 9001 : 2008, ISO 14001 : 2004 and OHSAS 18001 : 2007, was incorporated in the year 1988 to manufacture Stainless Steel Wires for the International market. Our plants, equipped with comprehensive and modern manufacturing technologies, are situated at Tarapur, an industrial township, amongst the biggest in India and strategically located close to the port of Mumbai. – See more at: http://www.nevatiasteel.com/about/#sthash.hcF42Uc1.dpuf
European Residential Anit Climb 3D Panel Fence
The 3D panel is reinforced with “V” folding to increase the rigidity and strength. All the panels have a 30mm barbed top edge for anti-climbing.
PRODUCT DETAILS
3D Panel Fence in other name of welded panel fence with wave
It is a modern and attractive appearance jointed with the post , and easy and convenient Which is ideally suited for most boundary and general security applications
Road and Transit: Highway, Railway, Road, City Transit
Industry Zone: Factory, Industry Zone, Sightseeing Zone, New Pattern Farm
Private Grounds: Courtyard, Villa
https://www.hbhou.com/panel-fence/
Public Grounds: Park, Zoo, Train or Bus Station, Lawn
Commercial Grounds:Corporation, Hotel, Supermarket
Choose the high quality of wire as raw materials,
through wire drawing, straightening, welding, bending,
phosphatizing,Powder coating or PVC coated, Packing
Assortments:
Hot dipped galvanized before
Hot dipped galvanized after
Electro galvanized wire + powder coated
Hot dipped galvanized wire + powder coated
More information click here.
Specification list
Mesh size | Wire dia | Height | V | Width | V Distance |
mm | mm | mm | no. | mm | mm |
4.0-5.0 | 630 | 2 | |||
4.0-5.0 | 830 | 2 | |||
50×100 | 4.0-5.0 | 1030 | 2 | 2000 | 100 |
50×200 | 4.0-5.0 | 1230 | 2 | 2500 | 200 |
55×200 | 4.0-5.0 | 1530 | 3 | ||
4.0-5.0 | 1830 | 4 | |||
4.0-5.0 | 2030 | 4 | |||
4.0-5.0 | 2230 | 4 |
Fittings
Post: Square post
Clamp: Metal clamp/Plastic clamp
Post Cap: Metal cap/Plastic cap
Hebei Houtuo Co., LTD. is a group company, main business including exporting the wire & mesh, fence products, post, anchor which coming from owned 4 mesh, fence, anchor mils, with turnover of 2000 tons monthly.We were founded in 1999 year, having more than 15 year experience of producing and exporting etc.The products are exported to Europe, North and South America, Middle East and East-south Asia and other area.
Sino Golden Sunshine (Group) Stock Company Limited,whose old name is Golden Sunshine (Hongkong) Stock Company Limited, is one of the sales companys established in Hong Kong by our steel mill named Tianjin Tiantie Zhaer Steel Production Co.,Ltd. and is an international group enterprise which integrates trade, manufacture and minerals. We own two specialized international trading companies, two professional departments, one specialized production base of PC Strand and Anchorage,production base of Deformed Steel Bars and Square Steel and one mining company. We export 570,000 tons of steel products yearly (including 250,000tons of Deformed Steel Bars,totally 170,000 tons of I-BEAM, H-BEAM, EQUILATERAL STEEL ANGLE and Non-equilateral Angle Steel, 50,000tons of Hot Rolled Steel Coil/Sheet and Flat Sheet, 70,000tons of Cold Rolled Sheet and Galvanized Board, 20,000tons of Seamless Steel Tubes and Welded Tubes, 10,000tons of Iron Wire and other metal products), 30,000tons of various types of Stainless Steel and products, and various types of construction material (Plasterboard, Cement Sheets, Steel Keels and Wood-panels ). The total trade value amounts to 10 million dollars yearly. We are the most professional manufacturer of Anchorage and Wedges in China which have the production capacity of PC Strand 40,000tons yearly, of multi types of Anchorage, Wedges and products 1,500,000 sets. We also have the production capability of Iron Ore concentrating in 300,000tons yearly containing FE 60%-66%
Sino Golden Sunshine (Group) Stock Company Limited also purchases and imports steel scraps worldwide for Tianjin Bohai Iron & Steel Group and Shougang Group.
Sino Golden Sunshine (Group) Stock Company Limited gets into the field of petroleum and coal business as well via the corporation with Petroleum Company of Singapore and Malaysia, and has the annual supply capability of petroleum products amounted to 500,000 tons, and of coal amounted to 300,000 tons.