Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
- Copper mould tube( square, rectangle and round )
- Crystallizing equipment of continuous casters
- Mould cooling jacket.
- repair of copper tube moulds
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion ,and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
INNER SURFACE COATINGS
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
SPECIFICATIONS OF COPPER MOULD
Square 60 x 60 – 350 x 350 (mm)
Rectangle 120 x 160 – 180 x 300 (mm)
Diameter 100-400 (mm)
Size(mm): 90×90, 100×100, 110×110, 115×115, 120×120
130×130, 135×135, 140×140, 143×143, 150×150
155×155, 160×160, 165×165, 175×175, 180×180
200×200, 220×220, 100×170, 100×173, 130×240
150×200, 150×210, 150×220, 160×200, 160×220
150×225, 160×235, 165×225, 175×225, 180×220
200×240, 240×240, 235×235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,
Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In The Industries Related To The
Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps & Petrochemicals,
Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.
Materials:
PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.
REGARDS
ARVIND JAIN – SALES HEAD
R-PIPE OVERSEAS
T: +91 22 6659 5201
M: +91 9930551137
Whatsapp: +91 9082065807
Skype: asj.rpipe
E: info@rpipeoverseas.com & rpipeoverseas@gmail.com
W: http://www.rpipeoverseas.com
A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,
PB Marg, Mumbai – 400008. (INDIA)
GST TIN NO.: 27ALTPJ6984G1ZB
Kaysuns is devoted to provide the package service of industrial solutions from China mainland. We are a manufacturer of stainless steel pipe fittings in China, but also an one-stop-shop provider for stainless steel pipes, pipe fittings, flanges, valves, fasteners, gaskets etc, customized fabrications and specific requirements are available. Stainless steel 304L, 316L, 317L, 347H, 904L, duplex 2205 and super duplex 2507 are our strength product, nickel-based alloy inconel 625, Hastelloy C276, Monel 400, Incoloy 800H, titanium alloy and copper nickel 90/10, 70/30 etc. are also available for us. Comply with ASME/ANSI,ASTM,EN/DIN, JIS,ISO,BS etc, our materials always fabricated and delivered from the global standards.
accesorios de bridas ha sido un fabricante y exportador profesionalmente administrado de bridas, tuberías, tuberías. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades.
| Tubos is the world’s leading carbon steel, alloy steel, and stainless steel tube manufacturers in Mumbai, India. Provide a diverse range of products and meets the highest quality standards. Our goal is to comply with the requirements established by our Quality Management System, in which customers, suppliers and key actors are included. Tubos complies with all international standards regarding the products we manufacture and the final uses of those products and also carry out bespoke mechanical operations upon request. We have the experience staffs in the steel industry that they can provide the access to best-in-class processing for steel pipe and tubes, including laser cutting, saw cutting, bending, and more than the customers need them exactly. |
| Tycoon Piping is well known for his trusted exporters of best precision tubes in the world. We supply both seamless and welded pipes, in a wide range of stainless steel, titanium, nickel and zirconium alloys. Tycoon Piping is the market leader in supplying of Hot Finished structural hollow sections in the UK and almost 25 years of experience in logistics, stockholding, in-house processing, and sector-specific requirements. We provide the best product guarantee to our clients with full satisfaction. |
Metallica Metals is known worldwide as the most competitive group in the world of Stainless Steel having its headquarters in Mumbai – India. It was incorporated in the year 1975 by 3 dynamic leaders named as Mr. Babulal Mehta, Mr. Jugal Mehta & Mr. Vallabhchand Mehta & they are the reason behind the exponential growth of Metallica Metals.
Largest (19 Yrs Old Iso Certified Company) Specialist in Stainless Steel SS Aisi 310 Seamless Pipes in India. Lanco Pipes and Fittings inventory now includes 310/ 310S Seamless / Welded Pipes, Tubes (Alloy 310 UNS S31000 / Alloy 310S UNS S31008).
310 Stainless Steel Seamless Pipe
Ø 6×1 mm AISI 310 Stainless Steel Seamless Pipe ASTM A 312
Ø 10×1 mm AISI 310 Stainless Steel Seamless Pipe ASTM A 312
Ø 1/2 “(21.3×2 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 1/2 “SCH10 (21.34×2.77 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 3/4 “(26.9×2 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 3/4 “SCH10 (26.67×2.87) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 1 “(33.7×2 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 1 “SCH10 (33.4×2.77 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 11/4 “(42.4×2 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 11/4 “SCH10 (42.16×2.77 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 11/2 “SCH10 (48.26×2.77 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 2 “Sch 10 (60.3×2.77 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 2 “(60.3×2.9 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 21/2 “(76.1×2.9 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 3 “SCH10 (88.9×3.05 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 4 “SCH10 (114.3×3.05 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Ø 4 “SCH40 (114.3×6.03 mm) ASTM A 312 AISI 310 Stainless Steel Seamless Pipe
Kogyo Steel Co., Ltd., a major Japanese manufacturer of Stainless Steel, Duplex Steel, Nickel Alloy & Titanium pipes & tubes. Headquartered in Tokyo & Founded in year 1984, the company by the late 1990s was one of largest japansese steel producers.
Kogyo Steel Co., Ltd., provides total piping & tubing solutions by manufacturing of Stainless Steel, Duplex & Super Duplex, Nickel Alloy, Titanium Pipes & Tubes. The strength of the Kogyo Steel Co., Ltd., is in manufacturing products for critical applications by meeting the stringent requirements which are then tested in the in-house Laboratory accredited to ISO 17025. The products are supplied in niche market such as Oil & Gas, Refinery & Petrochemical, Dairy, Chemical & Fertilizer, Thermal, Solar & Nuclear Power, LNG, Desalination, Defence, Aerospace, Chillers & Cooling system, Pulp & Paper Industry, Automobile etc. This makes the company an ideal choice for major EPC Contractors, project owners & process licensors across the globe.
“Koygo Steel stands by its commitment of delivering nothing but the best by bringing their technical expertise at work.”
Ashwin Impex are one of the leading manufacturers, suppliers and exporters of stainless steel, carbon steel, alloy steel, duplex steel, high nickel alloy pipes, tubes, butt weld pipe fittings, flanges, sheets, plates, coils, round bars, rods, forged fittings, fasteners in Mumbai India.
Our Products
Stainless Steel 304 Pipe Fittings
Stainless Steel 304 Flanges
Stainless Steel 304 Fasteners
Stainless Steel 304 Sheets & Plate
Stainless Steel 304L Pipe Fittings
Stainless Steel 304L Flanges
Stainless Steel 304L Fasteners
Stainless Steel 304L Sheets & Plate
Stainless Steel 316 Pipe Fittings
Stainless Steel 316 Flanges
Stainless Steel 316 Fasteners
Stainless Steel 316 Sheets & Plate
Stainless Steel 316L Pipe Fittings
Stainless Steel 316L Flanges
Stainless Steel 316L Fasteners
Stainless Steel 316L Sheets & Plate
more info please visit us http://www.ashwinimpex.com
Aries Alloys is supplier of 6al-6v-2sn titanium alloy in Mumbai, India, Uk, USA,
South Africa, California, Houston, Australia, Malaysia & Chennai, we stock Titanium
5Al-2.5Sn, Titanium 5Al-2.5Sn,Titanium 3Al-2.5V, Ti-0.3-Mo-0.8Ni,6Al-2Sn-4Zr-2Mo,
6Al-2Sn-4Zr-6Mo & 8Al-1Mo-1V material in various sizes.Call us for Nickel Alloys
Price List & our Live Stock list of High Temp Alloys, also compare our price of
6Al-6V-2Sn, 6Al-2Sn-4Zr-2Mo & 6Al-2Sn-4Zr-6Mo alloy with any Chinese or American
supplier of Titanium , we also offer best price of 8Al-1Mo-1V, 10V-2Fe-3Al,
15V-3Cr-3Sn-3Al, Alpha Alloys, Beta Alloys, Alpha-Beta Alloys & Titanium Dioxide
TiO2.Mail us to kalpesh@ariesalloys.com for any urgent requirement of Titanium
Products or Latest & Updated Price list of Titanium Plates
Please call us for free sample or visit :https://www.ariesalloys.com/
Dhairya Alloys is a Leading Manufacturer, extensive Stockholder of Bars, Plate & piping products for the Oil, Gas, Petrochemical and Nuclear Industries. Dhairya Alloys is the Manufacturer of Butt-weld Fittings, Forged Fittings, Compression Fittings, Outlets, Flanges & Long Radius Bends in Materials like Stainless Steel, Monel, Inconel, Hastelloy, Titanium, Copper, Brass, Aluminium & Nickel Based Alloys. Alloy Steel, Duplex & Super Duplex Steel, Nickel Alloys etc. We also manufacture and supply non-standard items in any material to customer’s specifications
asme b16.9 elbow manufacturers
We have specialization to manufacturer customized asme b16.9 elbow per customers’ specifications.Micron Steel and Tubes Supply large amount of High Quality asme b16.9 elbow manufacturer Stock World Wide at Best price. we welcome small quantity order. We are manufacturing ASME B16.9 Pipe Elbow in seamless or welded form, it proudly caters the needs of our customers in Oil & Gas, Power Generation, Petrochemical, and Industrial Construction, inclusive of Upstream, Midstream, and Downstream sectors.
asme b16.9 elbow manufacturer, ansi b16.9 elbow Manufacturer, asme b16.9 pipe elbows dimensions
ISO Certified Suppliers, Exporters, and Stockist of ASME B16.9 Elbow Manufacturer in India. Buy top quality ANSI/ASME B16.9 Elbows Available in All Dimensions at most Reasonable Prices.
Contact Us :
Phone: 022 67439119
Tele fax:022 2380 4268
Email: info@micronsteel.com
It gives us pleasure to introduce ourselves as a leading manufacturers of Pipe & Fittings. Mangalam Metal Corporation is a dynamic group, which was established over a decade ago to cater to growing demands of stainless steel raw materials.
We are Manufacturer & Exporter of stainless steel pipes, alloy steel pipes, carbon steel pipes, flanges, pipe fittings like elbow, reducer etc.
Svamitva Steel Industries are one of the largest exporter, manufacturer and global suppliers of pipes, Bars, Plates, Sheets, Flats, Fasteners & Valves in various grades that are available in Aluminium, Stainless Steel, Carbon Steel, Monel, Inconel, Titanium, Copper, Hastealloy, Hot Die Steel, Aluminium Bronze alloys etc. These can be made available in different construction & specification choices as per the specific demands of the customers.
We consistently meet our customers’ needs with a sharp focus on product excellence, cost optimization and timely delivery. Our mission is to provide our clients with personal dedication and professional client service every step of the way.
For more information contact vikas@svamitvasteel.com
We take immense pleasure in introducing ourselves as one of the leading Importer, Stockiest & Suppliers:
STAINLESS STEEL :: Seamless / ERW Pipes, Pipe-Fittings, Sheets, Perforated, Sheets, Plates, Circles & Ring, Rods, Wire, Wire-Mesh, Flats, Angles, Channels, SMP Rodes Eelectro etc. of Grades TP-304,304L,316,316L,321, 309, 310, 409, 410, 410S, 420, 430, 904, 904L etc..
S.S. & M.S. Fittings :: Seamless / ERW Stainless Steel Grade 202, 304, 304L, 309, 310 310S, 316, 316L, 321,
(B/W & S/W) 409 410 430 904 904L Elbow, Tee, Reducer, Long, Short, Stub end, Flanges, Nipples, Unions, Caps, Hex, Nipple, House Nipple, Coupling, Nut Bolts, Pipe Clamps, Dairy Fittings, Tricover, Clamp & Vales, and Industrial raw material etc.
ALLOY STEEL :: Seamless / ERW Pipes, Sheets, Plates, etc. of Grades EN-8, EN-9, EN24, EN-36,
EN-353, HCHCR – WPS, D2-D3, OHNS, High Speed, Steed, Steel, Hot Die Steel, 16MNCR-5, 20MNCR-5, SAE-8620 of ASTM A-335 GR, P1,P9, P11,P12,O22,etc.ASTM A-387 GR.,515/516GR.,60,70 & IS 2062 etc.
NON-FERROUS METAL:: Copper, Brass, Aluminum, Phosper-Bronze, Monel. Nickel, Inconel, Lead, Zinc, Hastelloy B & C, Titanium, Cupro-Nickel, Gun-Metal etc.. in the form of Rounds, Plates, Sheets, Wires, Circles, flats & Tubes.
MANUFATURING :: Manufacturing of all types of Pipe Fittings and Nut Bolt, Round Machinery,
All Types of Industrial Estate Raw materials etc.
Steel Pipes and Tubes India are manufacturer, supplier and exporter of stainless steel, carbon steel, alloy steel, duplex steel and high nickel alloy pipes, tubes, fittings, flanges, forged fittings, etc. We supply and export of high quality steel pipes and tubes like seamless pipes, seamless tubes, welded pipe, welded tube, erw pipe, erw tube, efw pipe, efw tube, fabricated pipes and fabricated tubes in India.
As one of the top manufacturers of quality Tool Steels, Die Steel, high-speed steels, mold steels, carbon steels, alloy steel and other metal materials in China.
We have been supplying tool steels like rounds, bars, drill rod, block, and plate or sheet in a variety of sizes to customers around the globe.
Our Tool Steels business is supported by a highly trained technical and sales team.
We regularly stock the standard grades and sizes of Tool Steels and high-speed steels as well as specialty steel grades….more
The Special Tool Steels we supplied comply with EU standard (DIN), UK Standard (BS4659 BS EN ISO 4957), USA standard (ASTM/ANSI), Japan standard (JIS), those steel standard available in the followings:
- Cold Work Steels,
- Hot Work Steels,
- Plastic Mould steels,
- High Speed Tool Steel,
- Alloy Steel,
Steel tubes India is India’s award winning Manufacturer, Supplier of nickel 200 tube stockist, nickel 200 tubing, alloy 200 tubes, nickel 200 seamless tube, ni200 tube, Nickel 200 Tube Stockist, Govt. recognised exporter & supplier of Nickel 200 Tube, Nickel 200 Tubing, Nickel 200 Gas Tube, Nickel 200 Exhaust Tubing, Nickel 200 Seamless Tube, High Temp Nickel 200 Square Tube in India and overseas. please take a look our just released Nickel 200 tubes price list earlier buy from others.
Valour Alloys Inc. is the leading Manufacturer, Exporter and Supplier of API Pipes.The American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries.
Somos un fabricante profesional de bridas, accesorios de tubería, accesorios forjados en la India, nos especializamos en la fabricación de todos los tamaños, estándar, tipo, etc. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades. Desde material no estándar altamente especializado hasta artículos listos para usar, desde la producción hasta el prototipo, desde mínimos bajos hasta corridas de fábrica, el fabricante de bridas tiene la experiencia para resolver sus requisitos más difíciles.
Ky Metal is professional etched stainless steel sheets manufacturer and supplier, offering elevator Etched Stainless Steel Sheet, Wall cladding Etched Stainless Steel Sheet, Stainless Steel Etching Sheets,Decorative SS Etched Sheets, SS Colored Etched Sheets
Etched stainless steel sheets are thin plates of stainless steel that have been chemically treated to produce a pattern or design on the surface. With 8K mirror plate, drawing sheet and sandblasting sheet as the base plate, the surface of the object is further processed after etching. Etching version can be processed by a variety of complex processes such as local blending, wire drawing, gold inlaying and local titanium, to achieve the effect of light and dark patterns and brilliant colors.
Stainless Steel Sheet with Etched Finish is widely used in architectural decoration. Especially in the choice of elevator board, the general use of mirror panel as the elevator bottom sheet, and then according to the needs of the pattern processing, so that the overall effect has a three-dimensional sense, reflect its beautification value.
The installation and use of the elevator should consider its value and safety performance. A variety of different patterns etched out of stainless steel, as well as the use of different colors, so that the elevator space is no longer dull, dull, more lively.
At Wonderful, we use advanced equipment to provide you with various exactness cnc machining service, including milling, turning, EDM, wire cutting, EDM and so on. Using our 3-axis, 4-axis and 5-axis CNC machining centers, our skilled machinists can use a variety of plastic and metal materials to manufacture turning and milling parts. Our CNC machining center can not only produce perfect samples for you, but also customize more small batch products for you, making us a one-stop service provider for your advanced design and small batch product needs.https://www.wdfprecision.com/
Flexible stainless steel cable mesh
Flexible stainless steel cable mesh, also called stainless steel cable mesh or stainless steel rope mesh, it is made of high quality stainless steel wire cable. According to the production process can be divided into ring type and interweave type. It is mainly used in the construction of wildlife parks, large animal pens or birdhouses, garden greening walls and handrail fillers or safety nets.
The Bzwiremesh plant has been producing this product since 1990. The independently developed equipment and skilled technology of the plant ensure the delivery of high quality products and perfect service on a global scale.
Flexible stainless steel rope net by S.S. SUS304, SUS316, SUS316L and other various material types of wire rope, two main strand structure: 7 * 7 and 7 * 19. Our mesh products are divided into two main lines according to the type of weave: interweave and ferring. Ring type series according to the ring material is divided into aluminum alloy mesh and stainless steel mesh.
Advantages of BZ stainless steel rope mesh:
High tensile strength, light weight;
Good weather resistance and corrosion resistance;
With good transparency, you can watch the animals and appreciate;
Large mesh span allows for large surface mounting.
The KLS titanium-clad steel plate is a typical metallic laminar composites. It is also referred to as titanium cladding or titanium-steel bimetallics. Normally, they are created by contortion bonding: either hot/cold-roll bonding or explosive bonding. The titanium dressed steel plate gets the inexpensive and high toughness of steel with the superior corrosion resistance of titanium.
The wholesale titanium clad steel plates are widely used in numerous applications as well as services. These include petrochemical & chemical industry especially chloral alkali process, food industry, plant food sector, damp metallurgy, electroplating, vacuum salt production, aquatic engineering, smokeshaft industry, pressure vessels, heat exchangers, desalination industry, and power plant, etc.
Products name: Stainless steel ferrule mesh, Stainless steel ferrule rope mesh, Stainless steel ferrule cable mesh, X-TEND mesh
Material: High-quality SS 304, 304L, 316, 316L wire ropes and stainless steel ferrules.
Features: light weight, good flexibility, high strength, good transparency, good invisibility. The service life is more than 30 years.
Applications: zoo mesh, animal enclosure, bird aviary, handrail infills, anti-falling safety net, garden fence.
Design and installation: various graphics and structures can be designed, and installation schemes can be provided.
Stainless steel ferrule mesh is also called stainless steel ferrule wire rope mesh. The mainly material is stainless steel cable and stainless steel ferrule. It is produced by putting the ferrules tough the cable first, and then press the ferrule using special molds. This kind of mesh has very beautiful appreance, it also has very good strength and flexibility. We can product various types of ferrule mesh in different cable diameter and mesh opening to meet our clients’ requirement.
Applications
The stainless steel cable mesh, especially the ferrule type mesh, are more used in fields like balustrades on bridges and staircases, large barrier fences, and building facade trellis systems. As an emerging product on architectural decoration and protection, stainless steel rope mesh has provided the mordern architectural decoration and horticulture engineering with a new and stylish element, which are getting more and more appreciated by designeers and clients all over the world.
Product Item：HY005
Manufacturing: Cold Rolled/Cold Drawn
Type: Seamless/Welded
Surface: Annealed and Passivated
Application Fields: heat exchanger, boiler, evaporator
Alloy 825/ UNS N08825/ W.Nr.2.4858/ Incoloy® 825
Alloy 825 tube, also known as Incoloy 825 pipe, W.Nr. 2.4858 or UNS N08825, this nickel alloy steel is a combination of nickel, chromium, and iron, with small amounts of molybdenum, copper, and titanium to enhance its resistance to corrosive environments, especially in chloride-containing media. 825 tubing is a durable and reliable material that is widely used in applications that involve harsh environments and high temperatures.
UNS N08825 Chemical Composition:
| % | Ni | Cr | Fe | Mn | C | Cu | Si | S | Al | Ti | Mo |
| Min | 38.0 | 19.5 | 22.0 | 1.5 | 0.6 | 2.5 | |||||
| Max | 46.0 | 23.5 | 1.0 | 0.05 | 3.0 | 0.5 | 0.03 | 0.2 | 1.2 | 3.5 |
Features of Alloy 825 Tube:
- Excellent Corrosion Resistance: Alloy 825 tube is highly resistant to corrosion, pitting, and stress corrosion cracking in various corrosive environments like nitric acid, sulfuric acid, phosphoric acid, and others.
- High-Temperature Strength: The inconel 825 tube can withstand high temperatures up to 550°C (1020°F) and still maintain its excellent mechanical properties.
- Good Weldability: Incoloy 825 pipe can be easily welded with various welding processes, including gas tungsten arc welding, gas metal arc welding, and shielded metal arc welding.
Incoloy® 825 Physical Constants:
| Density | 8.19 Mg/m³ |
| Melting Range | 1370-1400 ℃ |
Alloy 825 Tube Application:
- Chemical Processing Equipment: Alloy 825 tube is used in the chemical processing industry for making process vessels, reactors, tanks, and other equipment that need to be resistant to corrosion.
- Heat Exchanger Tube UNS N08825: Incoloy 825 tubing is commonly used as heat exchanger tubing in various industries like chemical processing, oil and gas, and power generation.
- Pollution Control: Alloy 825 tube is widely used in pollution control systems due to its excellent corrosion resistance, widely used in scrubber systems for removing harmful gas emissions from power plants and other industrial facilities.
- Petroleum Refining: Inconel 825 pipeis used in petroleum refining applications due to its ability to withstand highly corrosive environments, commonly used in heat exchangers, piping systems, and other equipment that comes into contact with sulfuric acid, hydrochloric acid, and other corrosive substances.
- Offshore Oil and Gas Production: The incolony tubeis widely used in offshore and onshore oil and gas production, where corrosion-resistant materials are needed to withstand harsh corrosive environments.
* Marine: W.Nr.2.4858 is used in marine applications, including seawater cooling systems, desalination plants, and offshore platforms.
* Acid Production: 825 pipe is commonly used in the production of acids such as sulfuric acid, phosphoric acid, and nitric acid due to its excellent resistance to corrosion. It is used in heat exchangers, piping systems, and other equipment that come into contact with these corrosive substances.
* Nuclear Fuel Reprocessing: Incoloy 825 seamless pipe is commonly used in nuclear fuel reprocessing applications due to its ability to withstand highly corrosive environments. It is used in equipment such as storage tanks, piping systems, and heat exchangers that come into contact with radioactive materials and corrosive substances.
Alloy 825 is available in wide variety of shapes and forms including pipe, tube, fitting, flange, sheet, plate, round bar, forging stock, flat bar, wire, hexagon. The various forms of UNS N08825 from Hengyang Piping meet different critical standards like ASTM, ASME, DIN, EN, ISO and clients’ specification. For detailed information about customized pipe and fittings, please contact us!
Tee- Banded Hot-dipped Galvanized Malleable Iron Pipe Fittings with BS Thread
| Product Item | malleable iron pipe fitting: elbows, Reputation malleable iron tees, sockets, bends, nipples, unions, crosses, flanges, plugs, backnuts, crosses over, round caps, etc. |
| Material | Malleable cast iron |
| Technics | Casting |
| Size | 1/8″-6″ |
| pipe fittings supplier Edges | Banded, beaded or plain; with or without Ribs. |
| Thread Standard | BS ANSI & DIN |
| Finish | Black, Eclectic Galvanized, Hot Dipped Galvanized, all be antirust treatment |
| Shape | Equal, Reducing |
| China pipes fittings Tee Grades | Heavy series, Standard series, Medium series, Light series |
| Packaging | Cartons, woven bags, wooden boxes |
| Quality Control | Excellent material, precise angles, good antirust property |
| Product Usage | Suitable for joining pipe lines of team, gas, oil, air |
| Certificate | ISO9001:2000; SGS Certificate |
| Others | 1.Special design available according to requirement. |
| 2.MOQ: 1000pcs. Negotialble as per type. | |
| 3.Packaging:In cartons or bags with/without pallet |
Learn more about our product please click here.
Razor wire is a new type of protective barbed rope. Concertina razor wire is made up with galvanized center wire and outer covered razor in stainless steel or galvanized steel. Razor wire fence has the advantages of beautiful appearance, economy and practicality, has good resistance prevention effect, easy for installation, etc. At present, razor fence has been widely used in many countries’ industrial and mining enterprises, garden apartments, border posts, military fields, prisons, detention centers, government buildings and other national security facilities.
Concertina razor wire fence is a kind of wire fence product made by welding razor wire together. Same as concertina razor wire, this kind of fence also cover densely with razors, this make the fence an not be climbed. Also the steel wire in the razor wire makes the fence very hard to be cut, it is very suitable for prisons, outposts, factory warehouses and other areas requiring high security.
Characteristics of Razor Wire and Razor Wire Fence:
Sharp appearance, good deterrence
Rotatable blades, strong intrusion prevention capability
Corrosion-resistant, long lifespan
Area separation, flexible mobility
Low cost, suitable for large-scale use
Easy installation, easy maintenance
High security fencing also called ‘358 FENCE’ ‘3510 fencing’ ‘antifinger fencing’ ‘clearvu fencing’. It is a high cost version of Loni ChieFence 358 anti climb mesh. The panel is welded with reduced carbon steel cable ， Material Grade: Q195, Surface treatment by Electrostatic polyester powder roaming finish(Powder-coated) over galvanized materials. And after that attach the fencing panels with message by suitable clamps(Clips). As a result of the 12.7 * 76.2 mm small mesh dimension, it is anti cut & anti finger climb.
358 high security fence China FEATURES
Anti climb
See-through panel
Anti-rust,Long Service Life
Fast Installation
Customer specs available
Rigidity
Learn more about our wire mesh via https://www.chiefence.com/
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
Hebei Deko Commercial Co., Ltd. (hereinafter referred to as the “DEKO”), the company is located in China’s “Land of Casting” Hebei province, DEKO mainly supplies products involved in municipal engineering and road construction and related products, such as Ductile iron Pipe, Pipe Fitting, Valve, Manhole covers, Gratings, Public Illumination, Urban Furnishing, Flange and Pipe Repair Clamp etc…. we can also produce according to the drawings and samples provided by customers, our products have been exported to Europe, Africa, Asia, Middle East and Southeast Asia etc… providing import and export business for domestic and foreign customers.
DEKO has its own fully automatic vertical production line and now we have reached a strategic cooperation with several manufacturers and become the only designated agent service by manufacturers and can be better provide customers with the best prices, excellent product quality, DEKO’s aim is: to supply the required products and high quality service for every customers and maintain long-term and stable cooperation.
Kitchen sink copper faucet LED draw-in kitchen dishes cold and hot water faucet
Great Flexibility: Pull down sprayer with black rubber hose covers a wide range of areas for easy cleaning and washing. Copper water purification kitchen faucet Easy Operation: Single lever handle for effortless and precise water temperature and volume control. Built In LED: Water powered LED light in changing hues creates a moody ambiance and offers extra relaxation.
– The LED light is powered by water flow, and will be activated once the water is turned on.
– Constructed from solid brass for durability and reliability.
– replacement hose for kitchen faucet factory Finished in a high quality, corrosion resistant polished chrome.
– Features a 360-degree swivel pre-rinse spout design and black flexible rubber spray hose.
– Not suitable for low pressure. Minimum required water pressure is 0.1 MPa (1 bar).
– All mounting hardware and hot/cold waterlines are included.
An ISO 9001:2008 Certified Company, The Metal Factory is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by The Metal Factory are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes, Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
1. Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
2. Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
3. Square Stainless Steel Pipes, Round Stainless Steel Tubes, Rectangular Stainless Steel Pipes & Tubes
4. Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
5. Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
6. Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
7. LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
8. Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
9. ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
10. Galvanised Pipes as per IS:1239/I
11. Square and Rectangular Steel Pipes as per IS: 4923
12. ERW Boiler Tubes: BS 3059, ASTM A 214
13. Air Pre Heater Tubes to BS: 6323 PART V
14. Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
15. Seamless Heat Exchanger Tubes ASTM A 179
16. CDW TUBES IS: 3074 or BS 980
17. CRCA ERW Tubes to IS 3601 OR IS 3074
18. Stainless Steel Electro polished Pipes Manufacturer/Supplier
19. Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
No.8 Mirror stainless steel mirror sheets is kind of mirror stainless steel sheets, like a mirror, through polishing stainless steel surface treatment, mirror effect can be divided into general grinding, fine grinding, super fine grinding, etc. No.8 Mirror stainless steel sheet process, specifications, colors, patterns and so on can largely meet the different needs of each customer. No 8 mirror finish stainless steel sheet is widely used in a variety of decorative design, as building Interior exterior decoration, screen, door, elevator, lift , wall decoration, cover panel, table or decorative surface, as well as stainless steel anchor line, stainless steel TV wall, column edge, etc; It is an essential foundation for high-end architectural decoration projects.
No. 8 mirror stainless steel sheet offers several advantages over other types of stainless steel sheets. Its highly reflective surface creates an aesthetically pleasing finish that is ideal for decorative applications such as architecture, interior design, and signage. The mirror finish also makes the surface easier to clean and maintain, as it resists fingerprints and smudges. In addition, No. 8 mirror stainless steel sheet is durable, corrosion-resistant, and has a long lifespan, making it a cost-effective choice for many applications.
Why choose us as your No.8 Mirror Stainless Steel Sheet Manufacturer?
As a mirror polished stainless steel sheet manufacturer, We are expertise in polishing stainless steel allows us to produce high-quality mirror finishes with consistent reflectivity and smoothness. Our ability to customize the size, thickness, and grade of stainless steel plates ensures that your customers can find the perfect product for their specific needs. Additionally, our experience in the industry allows you to provide competitive pricing and fast turnaround times, making us a reliable and trusted supplier. Overall, our expertise in mirror polished stainless steel plates offers our customers a durable and aesthetically pleasing solution for their decorative and functional needs.
HENAN FORWARD STEEL EXPORT CO.,LTD
Tel: +86-371-61310228 You also can visit us by sa514steel.com througth google
Address: Tower-A Room 3106 Kai xuan Plaza zhengzhou city of henan province China
http://sa514steel.com
Email: admin@qfsteels.com
SA240 TP310S Stainless, SA240 309S stainless, SA240 316TI stainless, SA240 304H stainless
1. What we do?
HENAN FORWARD STEEL EXPORT CO.,LTD Stainless warehouse provide ASME SA240 Stainless steel plate Bevel,Groove and cutting disc stainless steel machined parts .we have 1000tons tp316L,tp310s,tp304l,tp321, tp304h, tp316h,tp310h, tp321h,2205, S31803, 410, 430, 409, 443, 439, 310SI2, 316TI Stainless steel plate stock.
Besides that, our factory also provide the CNC Cutting platform and water cutting platform. Disc cutting, special parts cutting, stainless steel bevel and stainless steel groove service. Our machined precision to min 0.2 for the surface of machined.
Our cutting service had approved by Mexico and USA, and Canada Project.
2. Our mainly stainless steel grade for ASME SA240
SA240 TP202,SA240 TP201,
SA240 TP304,SA240 TP304L,SA240 TP304H, SA240 TP304N, SA240 TP304LN
SA240 TP316L,SA240 TP316, SA240 TP316H,SA240 TP316N, SA240 TP316LN,SA240 TP316TI
SA240 TP309S, SA240 TP309H,SA240 TP309,SA240 TP309Cb
SA240 TP310S, SA240 TP310, SA240 TP310H
SA240 TP347,SA240 TP347H,
SA240 TP348,SA240 TP348H,
SA240 TP321, SA240 TP321H
SA240 TP317L,SA240 TP317
SA240 TP444,SA240 TP410, SA240 TP430,SA240 TP443, SA240 TP439
3. Products Service of our unitedsteel warehouse.
Stainless steel plate
Stainless disc steel plate.
Stainless steel cutting
Stainless seamless pipe
Stainless seamless Tube
Stainless welded steel pipe
Stainless machined bevel
Stainless machined groove
4. Our Stainless steel thickness
Stainless plates
0.25mm-150mm thickness
Width: 20mm to 2500mm
Length 20mm to 10000mm
Max weight of each plate 6 tons.
Stainless seamless pipe
outer diameter 3.2-200mm,
Wall thickness 0.5-12.7mm
5. Stainless Production time:
5-8days in usual size.
If you need the bevel and groove stainless parts, we need min extra 7days.
6. Stainless Payment Item for HENAN FORWARD STEEL EXPORT CO.,LTD
TT payment Or 30% TT advance and balance should be paid after BL documents.
7. Why you choose us?
a. The faster production time, and most of production, we can control them in one week if the total weight are not large.
b. Better service, we promise that your inquiry will be sent official quotation in 24hours.
c. Faster delivery, we had owned transport truck department and transport stainless to our port in 24hours.
d. Quality promise processing: PMI Test at each stainless steel plates before delivery. We accept the third party inspection, GL. SGS.BV, DNV, LR,ABS and others.
8. Trade Item:
FOB, EXW, CFR AND CIF
Packages by wooden pallet, delivery by containers.
9. How to contact HENAN FORWARD STEEL EXPORT CO.,LTD?
Your can searh our company name from google or visit sa514steel and qfsteels through searching them at google.
Mr David
0086-371-61310228
admin@qfsteels.com
http://sa514steel.com
Galvalume steel is an important alloy material often used in daily life. The galvanized steel sheet is composed of aluminum-zinc alloy structure, which is composed of 55% aluminum, 43.5% zinc and 1.5% silicon solidified at a high temperature of 600℃. Its entire structure is composed of aluminum-iron-silicon-zinc, forming a dense quaternary crystal. Of an alloy.
Characteristics of Galvalume
Hot-dipped Galvalume Steel Coil has many excellent characteristics: strong corrosion resistance, 3 times that of pure galvanized sheet; beautiful spangles on the surface, which can be used as building exterior panels.
Corrosion resistance:
The corrosion resistance of “aluminized zinc steel coil” is mainly due to the protective function of aluminum and aluminum. When zinc is worn, aluminum forms a dense layer of aluminum oxide, which prevents corrosion-resistant substances from further corroding the interior.
Heat resistance:
Hot-dipped Galvalume Steel Coil has good heat resistance and can withstand high temperatures of more than 300 degrees Celsius. It is very similar to the high temperature resistance of aluminized steel plate. It is often used in chimney pipes, ovens, luminaires and fluorescent lampshades.
Heat reflectivity:
The heat reflectivity of Hot-dipped Galvalume Steel Coil is very high, twice that of galvanized steel sheet, and people often use it as a material for heat insulation.
Economical:
Because the density of 55% AL-Zn is lower than that of Zn, the area of the galvanized steel sheet is more than 3% larger than that of the coated steel sheet when the weight is the same and the thickness of the gold plating layer is the same.
Application of Hot-dipped Galvalume Steel Coil
use
The main uses of galvanized products are in two aspects. One is the shell and box of other electrical equipment used in electrical switch cabinets; the other is galvanized steel roofing for steel structure buildings, because of its good anti-corrosion and anti-corrosion properties. In many areas with heavy industrial pollution, aluminum-zinc color panels or aluminum-zinc fingerprint-resistant light panels are directly used on walls or roofs.
Construction: roofs, walls, garages, soundproof walls, pipes and modular houses, etc.
Automobile: muffler, exhaust pipe, wiper attachment, fuel tank, truck box, etc.
Home appliances: refrigerator back panels, gas stoves, air conditioners, electronic microwave ovens, LCD frames, CRT explosion-proof belts, LED backlights, electrical cabinets, etc.
Agricultural: pig houses, chicken houses, granaries, greenhouse pipes, etc.
Others: thermal insulation cover, heat exchanger, dryer, water heater, etc.
Different from Studded T post , T post replaces studs with holes. It’s consistent holes spacing for convenient and firm wire attachment. Customers can choose different sizes, lengths, and number of holes according to their requirement. Our posts range from lengths of 1.35m to 2.1m and weights of 1.1kg to 2.0kg per linear foot.
L-posts are one of the best options for securing fences. L posts are made of high-quality low-carbon steel. Compared with studded T posts, L posts use consistent holes to attach various fence wires firmly. With high strength, corrosion and rust resistance, easy installation, and a long service life, L fence posts are widely used in gardens or farms to fix fences firmly or to fix plants, such as tomatoes, grapes, trees, and so on. L Post is popular in Germany.
Product Parameters
| Specification | 30 mm × 30 mm,40 mm × 40 mm,50 mm × 50 mm etc. |
| Length | 1.35m / 1.6m /1.8m /2.1m or as request |
| Surface Treatment | Electrostatic spraying,Galvanized |
| Package | 5pcs/bundle,200pcs/pallet |
High carbon steel (or Spring Steel) can be hardened substantially and is used for high tensile applications such as springs, brush, Upholstered furniture, duct, auto parts.
With the increasing of carbon content, the wire becomes stronger and harder. There are four types of carbon steel including low (mild) carbon steel, medium-carbon steel, high carbon steel wire and very high- carbon steel wire.
Steel wire is a kind of multifunctional wire. High-strength materials make it withstand heavy things like hanging wire without being damaged.
Crafted from premium quality materials, our high carbon steel wire is engineered to withstand demanding environments and heavy-duty usage. Its high carbon content ensures superior strength and resilience, making it suitable for applications that require durability and longevity. Count on our wire to tackle even the toughest tasks with ease.
With its versatile nature, our high carbon steel wire can be used in various industries and projects. It serves as a vital component in fencing systems, providing reliable support and security. Additionally, it finds application in manufacturing, construction, agriculture, and many other sectors. Whatever your project demands, our high carbon steel wire is up to the challenge.
Installation and handling are made effortless with our high carbon steel wire. Its flexible yet sturdy construction allows for easy manipulation and shaping, ensuring a hassle-free installation process. The wire’s uniform thickness and smooth surface provide a seamless experience, whether you’re working with automated machinery or performing manual tasks.
accesorios de bridas ha sido un fabricante y exportador profesionalmente administrado de bridas, tuberías, tuberías. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades.