CENTRAVIS is a leading global supplier of high-quality solutions in seamless stainless steel tubes & pipes, ranked # 1 in CIS, # 4 in EU and # 6 in the world on sales volumes with global market share of 3.8%.
Size range of hot-extruded tubes: OD – 57-245 mm; WT – 3,05-35 mm;
Length – up to 15 000 mm.
Size range of cold-rolled tubes: OD – 4-114 mm; WT – 0,2-12 mm;
Length – up to 27 000 mm.
Production facility of « CENTRAVIS PRODUCTION UKRAINE PJSC » (Nikopol, Dnepropetrovsk region, Ukraine) is one of the largest European specialized companies producing seamless stainless steel tubes and pipes and incorporating hot-extrusion and cold-drawing shops, former part of Nikopol Yuzhnotrubny Plant (NYP), until 2000, the largest industrial complex producing seamless stainless steel tubes in the former USSR.
Product portfolio
CENTRAVIS product portfolio includes over 1000 sizes among more than 100 corrosion and heat resistant steel grades in 7 product segments:
General tubes & pipes;
Instrumentation tubes;
Boiler tubes;
Furnace tubes;
Hollow bars;
Heat exchanger tubes;
Nickel-based alloys
centravis-today-01_1.jpg
Product range comprises more than 100 international standards including GOST and TU accepted in CIS and western standards such as ASTM, DIN, NF, UNI, etc.
Sales structure
centravis-today-02.jpg
CENTRAVIS supplies products to all key markets worldwide through branched network of sales offices in Russia, Ukraine, Germany, Switzerland, Italy, the USA and sales agents in other areas like Brazil, Middle East, Korea, Australia and others. Sales geography comprises 70 countries. Advantageous geographical location coupled with a developed product range and Western business standards enabled CENTRAVIS to occupy a unique position in the world market of seamless stainless steel tubes. Almost 60% of products are sold to the EU while the remaining 40% – the CIS market, North America and the rest of the world.
For many years CENTRAVIS has been a leading supplier of seamless stainless steel tubes for nuclear power plants and thermal power plants in Russia and the CIS. Since the beginning of this year, the Company has signed several major contracts with Russian companies for steam generator tubes supply for nuclear power plant projects worldwide with a total value more than $ 30 million. Manufacturer co-operates with the European partners in this direction no less actively. CENTRAVIS supplied the products for such well-known nuclear projects as construction of nuclear power plant of 1,650 MW in Flamanville (France) and “Jules Horowitz” reactor project in another French city -Cadarache. The Company has also made a significant progress in supply of instrumentation tubes for well-known European automotive brands.
In addition to power generation and automotive industries, CENTRAVIS products are widely used in airspace and shipbuilding, chemical and petrochemical industry, mechanical engineering, automotive, oil and gas industries, non-ferrous metallurgy, food processing and other industries.
The ANGELO ZANI & C. was founded in 1939 by brothers Angelo and Argante Zani, it appears to be the trading company of Emilia Romagna that the most time working in the engineering sector in the range of special steels and irons drawn. Founded in 1939 in Viale Pietramellara in Bologna in 1953 moves offices and warehouse in Via Malvasia and in 1972 moved to its present location in Via dell’Arcoveggio 72 (Exit 6 bypass Bo), which proved later commercially strategic point in the map of Bologna. The company currently wholly family, with presidential Angelo Zani (son and grandson of the founders) are run by the third generation Dr. Andrea Zani (managing director in charge of the commercial sector) and Dr. Michele Zani (managing director administrative director). In 1992 the surface covered warehouse is set to expand (now about 2,000 square meters) so that the ANGELO ZANI & C. was able, in addition to the products it normally treated in bars and in different profiles ( Fe 37 Drawn, C40 Laminate-Drawn-Adjusted, 9SMnPb36 and 35SMnPb10 for high machinability, 18NCD5 hardening steels and tempera normal and related to Pb, quenched and tempered steels 39NCD3 normal and related to Pb), expand its range (Stainless Steels for the marine industry and food Indeformable Steel, Tubes Tubes and Iron and Aisi, sheets Fe 37 C-40, etc .. ) and gear up for the service of cutting materials (both in series and for light truck), going from meeting the needs of customers. The basic principles to where the JOHNNIE ANGELO & C. srl is inspired are the quality of products, a wide selection and quick delivery; features increasingly recognized by customers and that allow this to count among the most important companies in the industry automatic packaging machines and more than a thousand companies operating in the engineering sector.
Principally engaged in the design, manufacture and sale of specialised seamless pipes for the oil and natural gas industry, including oil well pipes (oil transfer pipes and casing pipes) and petrochemical pipes, as well as other specialised seamless pipes for vessels, boilers and other purposes.
ANIL METALS have great pleasure to introduce ourselves as one of the leading stockiest and supplier of Stainless Steel in various grades such as AISI 304, 304L, 316, 316L, 321, 310, 410 & 430 etc., Hast Alloy, Alloy 20, Monel, Incoly, 904L and other special alloys. Besides we also deal in Non – Ferrous metals such as Aluminum, Brass, Copper, Phosphor Bronze, Gun Metal in all shapes and sizes.
We can offer, as stated above, at competitive prices and can assure you of quick deliveries at short notice. Besides we have many years of experience in the trade and are confident of satisfying your needs and requirements. For your information we have been supplying these items to various industries throughout South India.
We therefore request you to enlist Our Name in your List of Approved Vendors send as your valued enquiries which will receive our immediate attention.
Thanking you and assuring you of our best services at all times.
AnShan Hong Ming Metallurgical Machinery Co., Ltd and Anshan Ying Yat Trade Co., Ltd is an integrative group corporation.
We can process cast steel, cast copper, cast aluminum and any parts that cannot be processed by machine.
We can produce heavy cast welding products. We also can produce mechanical processing products; rivet welding and heavy rivet heavy cast steel and all kinds of processing products whose weight is 10 ton – 100 ton.
We export wire, reinforced bar, plate, tube (seamless pipe, straight welded tubing, galvanized pipe, high frequency welding tube, helical tube etc), I-beam, angle bar, channel steel and any other steel.
We can design, produce, manufacture, install and test various steel rolling.
Types of service:
1. Providing model, design, manufacture, installation and commissioning as to the requirements of the customers.
2. Providing the plane design, general layout of the equipment; process design and products design of steel rolling etc. various technical design.
3. Providing long-term technical service to the customers as to their requirements.
Welcome to contact with me at asyingyi15 at 126 dot com.
Tel/Fax: 086-0412-8562501
Contact person: Cathy Xu
We are looking forward to hearing from you soon.
In the year 1975, Mr C K Jain gave a humble beginning to today’s “M/s Antriksh Metal Corporation”, with its office in the vicinity of Charni Rd, the epitome of city of Mumbai’s Steel Market. Under his guidance and technical experience, the company grew and established its identity as a main quality supplier of steel and other products in the industrial sector all over the country.
APEX TUBES Private Limited is one of India’s most trusted Stainless Steel Pipes & Tubes manufacturing companies. An ISO 9001:2008 company, APEX was established in the year 1992 with a vision to manufacture and provide Stainless Steel Tubular solutions to the industry. The promoters of the company, with ample experience and expertise, sensed the opportunities in this fast emerging field and invested in the best available human resources, technology, infrastructure and materials.
The company has strong infrastructural facilities and a team of highly skilled professionals that have voluminous knowledge of their respective field. We have one of the best infrastructures in the industry because of the manpower and production facilities. We believe in achieving excellent performance, full capacity utilization, and accurate productivity by high & dedicated endeavors. Quality control set up of ours has been impelled to cater the products of flawless performance that meet to the Indian & international quality parameters.
The following items in wide range of sizes and grades to suit diverse needs are readily available with us in bulk quantities.
A. STAINLESS STEEL: SHEETS, PLATES, COILS, STRIPS IN THE GRADE OF
202 , 304, 304L , 316, 316L , 316TI , 309 , 310 & 410.
B. STAINLESS STEEL: TUBES, PIPES – SEAMLESS & WELDED, PIPE FITTINGS, FLATS, RODS,WIRES, STRIPS IN THE GRADE OF 304, 304L, 316, 316L, 316TI, 309, 310 & 410.
C. PIPE FITTINGS: LIKE ELBOW, REDUCER, BEND, STUBEND, TEE, FLANGE, NUT, BOLT ETC.
* SPECIALIST IN : STAINLESS STEEL SHEETS, PLATES, COILS, STRIPS, FLAT BARS, PIPES ETC. IN ANY GRADE.
“Apurvi” is in business of manufacturing of Stainless Steel Pipe for submersible pump & motor.
Apurvi Industries was established in the year 2000 by Mr.Viren Gathani basically a technical person that is production Engineer with a prior experience of 8 years in utensil manufacturing.
“Apurvi” stands for getting right material form right source at right time. Each of our departments Production, Inventory, Marketing, and Sales & Service is fully developed for a better serve management, so as to offer the best product quality & prompt service to our clients. Along with Equipment, Men power is also given special attention.
Apurvi industry has a production capacity of 1200 pipes/day [average length 600mm]. Pipes can be supplied in polished or dull finish or pickled condition. Company can manage grooving operation as per customer requirement.
Established in 1992, Arch City Steel is a customer-driven distributor of carbon, stainless, alloys and nickel alloys. Inventory is built around our customer’s needs. Our team specializes in uncommon sizes so you can complete even the toughest jobs. Company has a rich stockpile of products that range from carbon, nickel to stainless steel pipes, tubes, bars, plates and sheets. Apart from the standard catalogue products, we also offer customized goods on request.
Armtec Infrastructure Inc. and its subsidiaries, including a jointly controlled entity, is a manufacturer and marketer of a range of infrastructure products and engineered construction solutions for customers in a diverse cross-section of industries that are located in every region of Canada, as well as in selected markets across the world. The Company operates in two principal business unit segments within the construction infrastructure industry: Drainage Solutions (drainage) and Precast Concrete Solutions (Precast). Drainage manufactures and markets corrugated high-density polyethylene pipe, corrugated steel pipe and other drainage related products, including small bridge structures. Precast manufactures and markets engineered precast systems, such as parking garages, bridges, sport venues and building envelopes, as well as standard precast products such as steps, paving stones and utility vaults.
Arvind Pipe & Fittings Industries Pvt. Ltd., Came into existence in the year 1982 well known as Arvind Metal Syndicate. The genesis of ARVIND’s birth & growth is “ACCEPTING CHALLENGES.”
The planned Growth has transformed into two separate manufacturing units one Welded, Seamless Tubes & Pipes and other Pipe Fittings & Flanges. We will serve you for all your piping requirements under one roof such as Pipe, Tubes, Pipe Fittings, Flanges product.
Ashapura Stee offer the first class reliable products & services with the highest degree of technical skill and commercial service during production and after sales. In-between this, we lay strong emphasis on quality assurance, environmental protection, economic growth and human respect as they are the fundamental keys to success. All these have helped us to manufacture and supply high-end products such as Sheets & Plates, Coils, Strips and Butt-weld Fittings. Thanks to superior quality of its products and its core values, our company has won the approval of many of the worlds major end users and has obtained the major quality accreditation and certification of ISO 9001:2000.
Ashirwad Steels and Industries Ltd. (ASHSI) engages in the business of sponge iron and bottling of gas. The company manufactures and supplies sponge iron used in manufacturing finished steel. Under its bottling business, the company is engaged in bottling of hydrocarbon gas and liquefied petroleum gas (LPG). Ashirwad Steels and Industries has two sponge iron plants located at Jamshedpur, Jharkhand and Nalgonda, Andhra Pradesh. The company was incorporated in 1986 and headquartered at Kolkata.
With over five decades of experience in the metal industry, Ashok Steel Industries is a reputed and quality conscious manufacturer and supplier of construction and industrial products. Our huge experience and expertise is the prime driving force in our efforts to gain a leadership position by offering quality. We Manufacture Alloy and Non Alloy Iron and steel products.
Started by Mr. N.R. Munot in the year 1985 with a vision to provide best of the quality products, the company has been a leader in the fasteners market since then. Our promoter’s visionary guidance and dedicated support from our team of professional assists us to successfully manufacture these products as per different standard, material options specifications.
ASIAD STEELS manufactures and Exports stainless and super alloy bolting which includes:
Hex bolt, Hex Nuts, Stud bolts, Threaded Bars, Washers, Hex plugs etc. as per standards ASTM, ASME, DIN and UNI. The application industries are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/ Offshore). These Material are being supplied to Domestic Market and Overseas Countries Like: UAE, QATAR, OMAN, SAUDI ARABIA, KUWAIT, BAHRAIN, IRAN, ITALY, FRANCE, U.K., SOUTH-AFRICA, AUSTRALIA, PANAMA, U.S.A. etc.
Asian Tubes Limited, Ahmedabad, (India) is an ISO 9001:2008 accredited india’s leading manufacture and exporter of HFIW/ERW Mild steel pipes, having manufacturing plant at Ankhol, Kadi, near Ahmedabad (India) with five latest state of art HFIW welding tube mills.
Quality is the hallmark at “Asian”. Strict adherence to the policy of “No Compromise on Quality” is practiced our stringent control over procurement of raw materials, production process, streamlined distribution channels and timely delivery of finished products. This has resulted in repeat purchases not only by discerning Indian customers but also from customers in U.S.A., Europe, Middle East and other Asian & African Countries.
Since 1981 Asoka Ferrocast Ltd. has established itself as a pioneer in distribution of steel pipe. In the year 1983 the company was appointed as distributor of The Tata Iron & Steel Company Ltd.(tubes division) for eastern region. We are also authorized distributor of Jindal India Ltd., Jindal Pipes Ltd. & Maharashtra Seamless Ltd. for distributing steel pipes manufactured by them.
AZ Steel is an AZ Group enterprise based in Marano Vicentino in the province of Vicenza, in north-east Italy. The plant at Marano Vicentino covers an area of 3,000 m2 dedicating to production, 1,000 m2 to warehouse storage and 400 m2 to offices and the quality laboratories
A 500m2 sales and logistics department in Bologna c/o Giò Steel S.r.l.
A sales and logistics department in Munich, Germany Stabtec GmbH
A representative in Lahore, Pakistan
A vast network of small and medium-sized enterprises in the area between Vicenza and Padua
An export share of roughly 85%
A young team composed of 36 persons
Detailed Product Description
1) Standard: ASTM A106,A53,A179,DIN2448, DIN1629,DIN2391
2) Grade: Grade B,ST37, ST44, St45, ST52, S235JR,S355JR
2) Size: From 1/2″ to 24″,
3) Wall Thickness: 2-60mm
4) Length: 4M to 12 M
Packing
1) Packing in bundles,
2) Surface: Varnish coating
3) Ends: Beveled or square cut, Plastic capped.
4) The pipes also can be 3PE or FBE or Galv. coated.
Inspection & Certification
1) Certification: ISO, API, ASTM, DIN etc.
2) Mill Test Certificate: EN10204/3.1B
3) Third party inspection: SGS, BV, Lloyds etc.
History
We bulded in the August of years 2007,and total 6 years till now. We have rich experince to exported to Middle-East and Africa and Europe,South-East Asia.
Service
Company is located in Baoding city,hebei province. It’s a modern enterprise with integration of both manufacturing and exporting. Adjoining the capital Beijing and Tianjin port,the traffic is very convenient. And the products have been exported to over dozens of countries and regions in the world such as Southeast Asia,the Middle East ,Europe and America etc.