BRÜCK is Europe’s largest forge master and is considered one of the world’s leading and largest specialists of forged and seamless hot rolled rings, flanges, and special forgings as per standard or customer design.
Shanghai Mountaingao Corporation Limited, located in Shanghai, is a reliable and professional supplier of wear, heat and corrosion-resistant castings and the relevant grinding equipments and alloy products since 2006. Our casting products and alloy steel products have been well exported to Europe, America, South America and some other countries and areas.
Our products involve various kinds of materials, such as low Chrome alloy steel, middle Chrome alloy steel, high Chrome alloy steel, high chromium white iron, low chromium cast iron, Ni-hard cast iron, high Manganese steel and other heat and corrosion-resistant castings. Our foundry has necessary production and heat treatment equipments, such as mid-frequency induction electrical furnaces, quenching and tempering furnaces, blast shot. Test facilities include Spectrometer for chemical analysis, HRC table hardness tester, HBN table hardness tester, two portable hardness testers, impactor and universal material testing machine for inspection of mechanical properties, matrix microscope for metallographic examination, ultrasonic tester for ultrasonic inspection and magnetic particle tester for magnetic testing. These facilities are used to ensure the consistent quality of products. We achieved the certificate of quality management system ISO 9001:2000. Our current capacity of finished castings is 4500 tons / year. We have a good credit of delivery of products in accordance with the contracts.
With the principles of preciseness, honest and high efficiency, we are keeping on seeking the maximum both of customer’s and ours’ benefits. With the philosophy of “quality, innovation ,and service”, we are taking great efforts to providing our customers with the very finest products and professional service, and continuously advance our core ability of competition and get the momentum for sustainable development.
Warmly welcome any serious inquiries from all our customers of the world, and sincerely hope to cooperate with you to achieve mutual benefit.
We UTTAM STEELS are a renowned stockist and supplier of a wide range of Stainless Steel Products. Our range is acclaimed for its various features such as resistance to temperature & abrasion, durability and ductility. The range complies with the set industry standards and caters to the needs of Various industries.
Our organization is backed by a rich vendor base, which helps us to provide quality products to our clients. These vendors are renowned manufacturers of the industry and are highly trustworthy. Owing to the quality products that we procure from our vendors, we have been able to win the trust and confidence of our clients. Our transparent business practices have won us a rich client base across the nation.
With the constant guidance of our mentor,we have carved a niche in this industry. His vast experience in this domain and immense expertise has allowed us to reach phenomenal heights.
“HMP Mercantile Corporation” started its business in 2001. We offer extensive range of products like plate flanges, forged flanges, sheet metal components, turned and machined components, gears and shafts and others. Along with this we provide a range of services that fulfill the specific demands of clients. Our some value added services are:
To source the best manufacturer as per the buyer’s requirements
To arrange the quotations/samples
To act as a communication bridge
To monitor the manufacturing at all stages
To ensure that the supplies are made as per the schedules
To make the necessary follow up as advised by the buyer
With the help of our team of professionals, we assist the buyer to source the right mercantile from the best manufacturer at affordable price with a best delivery. Basically, we do not manufacture, sell & export any product.
We have established ourselves as one of the reputed sourcing agent in India. We work as an interface between the buyer & seller to facilitate the business. We specialize ourselves in area of product development, production inspections, timely deliveries, coordination & communication etc. All the orders will be directly executed by the manufacturer. Buyer gets the advantage of having a back office like support based in India.
CARBON STEEL ELBOW SUPPLIER IN CHINA
Carbon Steel Elbow: In pipeline system, elbow is a pipe fitting that changes the direction of pipeline and is used to connect the bend of pipeline.
Product information of Yarong Carbon Steel Elbow
Produce name | 45 Degree Elbow Supplier |
TYPE | 45°, 90°, 120°, 180° |
Material | stainless steel, carbon steel, alloy steel |
Size | 1/2″-100″, DN15-DN2000 |
Pressure | SCH10-SCH160 |
Surface | Clear, Bright, Brushing |
Packing | Steel Pallet, Plywood, wooden Pallets |
Origin | Made in China, Hebei |
Species | More Than 300 Kinds For Choice |
Manufacturing process of Yarong Carbon Steel Elbow
Elbow is a kind of pipe fitting used for pipe turning. It has 90 degree elbow, 45 degree elbow and so on. It can be manufactured according to the needs of the project. The manufacturing process of elbow with different materials and different pressures is also different.
The forming process of seamless elbow commonly used in our factory includes hot pushing, stamping, extrusion, etc. Yarong®
The hot push elbow forming process is a process in which a special elbow pushing machine, a core die and a heating device are used to make the blank sheathed on the die move forward under the push of the pushing machine and be heated, enlarged and bent during the movement. The deformation characteristic of the hot push elbow is to determine the diameter of the tube blank according to the law that the volume before and after the plastic deformation of the metal
material is constant. The diameter of the tube blank used is smaller than the diameter of the elbow. The deformation process of the blank is controlled by the core die, so that the metal compressed at the inner arc flows and compensates to other parts thinned due to the expansion, so as to obtain the elbow with uniform wall thickness.
https://www.yarongsteel.com/elbow/45-degree-elbow-supplier.html
The tube blank equal to the outer diameter of the elbow is used for the stamping of the elbow, and the press is used to directly press the elbow in the die.
Stamping elbow is divided into cold stamping and hot stamping. Usually, cold stamping or hot stamping is selected according to material properties and equipment capacity. The forming process of cold extrusion elbow is to use a special elbow forming machine to put the tube blank into the outer die. After the upper and lower dies are closed, the tube blank moves along the gap between the inner die and the outer die under the push of the push rod to complete the forming process. The elbow made by cold extrusion of internal and external die is beautiful in appearance, uniform in wall thickness and small in size deviation, so this process is mostly used for the forming of stainless steel elbow, especially for thin-walled stainless steel elbow. The internal and external die used in this process requires high precision, and the deviation of the wall thickness of the tube blank is also relatively strict.
Middle plate welding is to make half of the elbow section with middle plate and press, and then weld the two sections together. This process is generally used for elbows above DN700.
We have a variety of Carbon Steel Elbows, click here to view.
As a Stockists & Supplier of Stainless Steel & Metal Products, Skytech Metal (india) Pvt. Ltd. offers an exotic and wide range of Stainless Steel products such as Stainless Steel Bars & Rods, Stainless Steel Angles, Stainless Steel Flat Bars, Stainless Steel Flanges, and Stainless Steel Patta Patti, along with their respective different grades in stock. We service industries across the world requiring these high temperatures, heat resistant and or corrosion resistant alloys. Skytech looks forward to offer you with your specialty metal needs! Call us or send us your request quote today.
Established in the year 1984, Spark Electrodes Private Limited is an ISO 9001:2000 certified organization engaged in manufacturing, exporting, and supplying of a wide range of GI Pipes, Industrial Pipes, Tubes, Fittings, Flanges, Sheets and Fasteners. We are one of the best Steel Pipes Manufacturer in India and probably in the world. The entire range is procured from reliable and trusted vendors, which ensure that the product we offer is manufactured in compliance with the set industry standards. We also do wholesale of Steel Pipes including GI Pipes, Galvanized Pipes
We are a leading and one of the fastest growing industrial groups of India. The group has a history of more than 2 decades since we set up our first Steel Pipe manufacturing unit at Ghaziabad (UP), North India. In the last 20 years the group has grown at a very rapid pace.
Qinhuangdao Yanye flange Manufacturing Co.,Ltd, short name Yanye Company, was built up on august of 2000, specialized in carbon steel flange and stainless steel flange, mainly works on metallurgical, electric, chemical and building material industry, shipment and so on, is one subsidiary corporation of Qinhuangdao metallurgical machinery Co., ltd. According to the world market we invested 3 million in the flange product line which can produce 8000tons flanges a year.
Our main products are various specification, for example, plate flange, thread flange, slip-on flange, socket welding flange, lap joint flange, blind flange, and welding neck flange in accordance with JIS, ANSI, DIN, KS, GB. Our products are salable in America, German, Japan, and Korea and had won recognition.
We get the qualification of export-import as a manufacturer in July of 2003; go into the system of quality management in august of 2005; get the KS in June of 2006; and get the ISO9001:2000 in July of 2006.
We have 30 moa ground, 6000sq.m. building area, 20million RMB capital asserts and 1.6M and 2.5M vertical turning machine,1.25M vertical turning machine, numerical control lathe, 32MM pate shearing machine, 750KG air hammer, 400KG air hammer, several kinds of rolling levelers. For about more than 200 equipments.
In order to keep the quality of the product, we built up a serious scientific management system, equipped with ultrasonic detector and x-ray detector.
Our tenet is ‘not for the biggest, but for the longest customer’s satisfaction is our pursuit. Welcome to contact with us, and develop a beautiful future together.
It is really welcome for you coming to China and visits our factory!
The Total Piping Solutions Steels has drawn together under the one roof of the total spectrum of trading, stockholding and processing activities in Stainless Steel, Carbon Steel, nickel Alloy, Alloy Steel, Copper, Brass, Monel.
Fisco Steel Corporation Limited, located in Shanghai, is a reliable and professional supplier since 2000s.We mainly involve in exporting of steel pipe/tube, valves, fittings, flanges, and some other steel products. Our steel products have been well exported to Europe, Middle-east, South America and some other countries and areas.
We have our own cooperating plants, and all plants are certificated with the ISO 9001 Quality System. And we are proud of our service with supplying the high quality products in the lowest cost and shortest lead-time
With the principles of preciseness, honest and high efficiency, we are keeping on seeking both of customer’s and ours’ benefits. With the philosophy of “quality, innovation ,and service”, we are taking great efforts to provide our customers with the very finest products and professional service, and continuously advance our core ability of competition and get the momentum for sustainable development.
Warmly welcome any serious inquiries from all customers of the world, and sincerely hope to cooperate with you to achieve mutual benefit.
We are a company with we can do attitude. We are a renowned stockists and suppliers to many leading Indian industries. We have been in the market for more than last three decades catering very stringent quality products. The hallmark of our existence even in the adverse market is our quality supplies and prompts response to the customer’s needs.
Venus Trading Company is one of the oldest traders of Carbon Steel & Stainless Steel Pipes & Tubes, FCS & FFS, BW, Screwed and S.W.Pipe Fittings, Flanges & Industrial Valves serving various petrochemical and pharmaceutical factories, refineries, power projects (Thermal & Nuclear), water treatment plants, space research organization, engineering construction companies in the Indian subcontinent since 1942.
We take the pleasure to introduce overselves as one the largest IMPORTERS, STOCK HOLDERS & SUPPLIERS for the following materials:
STAINLESS STEEL, SHEET, PLATES, COILS, TUBES, PIPES, RODS, WIRES, FLATS, STRUCTURAL, FITTINGS, FLANGES etc.
Confirming to TP-202, 304, 304L, 309, 310, 310S, 316, 316S, 316TI, 321, 410, 430, 904L, NICKLE, MONEL, INCONEL, TITANIUM & ALL HIGH NICKLE GRADES.
ALL ITEMS IN BRASS, COPPER, ALUMINUM, CARBON STEEL, MILD STEEL & BOILER QUALITY (BQ) ITEMS.
We are regularly supplying these items to many leading industrial Units consisting of CHEMICALS, FERTILIZERS, PETROCHEMICAL PLANTS, REFINERIES, PAPER MILLS, CEMENT PLANTS, SUGAR MILL, FABRICATION UNITS etc.
We also supply these items especially Stainless Steel Sheets/ Plates/ Coils/ Pipes to Engineering Industries who are engage in the Manufacture and fabrication of Process Equipment. We can supply the Items even under third party inspection viz BUREAU VERITAS, D.N.V. H&G, KAVERNOR POWER GAS, UDHE INDIA, EIL, LLOYDS, TOYO, CHEMTEX, CEIL, TECNIMONT ICB & IBR etc.
As we are regularly maintaining bulk stock in every item, we can arrange supplies in time and that too at the most competitive rates. We shall be thank full to you to kindly enlist our name with your approved Vendor list and favor us with your valuable enquires against your regular requirements.
We would appreciate to get your esteemed enquires and look forward to the pleasure receiving your valuable response.
Thanking you and assuring our best services at all times.
Somos un fabricante profesional de bridas, accesorios de tubería, accesorios forjados en la India, nos especializamos en la fabricación de todos los tamaños, estándar, tipo, etc. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades. Desde material no estándar altamente especializado hasta artículos listos para usar, desde la producción hasta el prototipo, desde mínimos bajos hasta corridas de fábrica, el fabricante de bridas tiene la experiencia para resolver sus requisitos más difíciles.
Qingdao Chenggang International Trading Co., Ltd. from its start 25 years ago as a flange factory in Shanxi Provence, Lujin United International has grown into a global organization of source, manufacture, export from mainly pipeline products expanded to various kind of construction and decoration materials, machinery and hardware, as well as other related goods to meet customer’s needs.
Our team strives to lead us in providing value-added services and support our clients throughout the world. And the team members are equipped with professional rich experiences of engineering, technical skills, sourcing, marketing, finance, transportation, contract administration, etc. which ensure our staff delivery excellent qualified products and one-stop comprehensive service efficiently to our customers and clients. We are involved in and at the forefront of exportingour goods overseas to fulfill customer’s needs. And the products have already been exported well over 500 containers yearly to the markets of America, Asia, Africa, Australia, and South America.
We, Piping Port from 2009 are one of the famous manufacturers of an extensive array of Stainless Steel Sheet and Round Bar. Our offered range consists of best grade Stainless Steel Sheet, Stainless Steel Round Bar, and Stainless Steel Tube. Using the best quality raw material, all offered products are designed as per the user need.
Neelcon Steel Industries represents a new era in steel manufacturing & Suppling. Neelcon Steel Industries produces steel products of the highest quality, while emphasizing employee safety and care for the environment Test.
Maintaining a safe working environment is our first priority at Neelcon Steel Industries. That’s why we’re so proud of our safety achievements Our stainless steel products are supplied & accepted by our clients in various sphere of industries ranging from basic industries such as Paper, Textile, Sugar, Dairy, Cement, Engineering to more complex such as Petroleum, Chemicals, Power, Offshore, Onshore & Nuclear Industries.
We deal in Stainless Steel, Carbon Steel, Alloy Steel, Copper Alloys & Exotic Nickel Alloys in form of Pipe, Tube, Stainless Steel Sheets & Plates, Fittings & Stainless Steel Flanges, Stainless Steel Nuts Bolts & Fasteners, Cupro Nickel fittings, valves, Stainless Steel Pipes. We can fulfill Client’s requirement of all size as we stock huge amount of material from both indigenous & foreign manufactures.
Neelcon Steel Industries is a professional supplier, mainly engaging on manufacturing various stainless steel products. Our products are widly used by many famous companies
We will be your strong support for your business with our excellent products and services.
If you have any suggestion or query, please do contact us. Your suggestions are welcome & highly appreciated.
We are one among the most recognized and sought after manufacturers, exporters and suppliers of industrial supplies which includes stainless steel pipes & pipe fittings, tubes & tube fittings, flanges, fasteners, bars, sheets, plates, coils etc. Owing to our stringent quality measures, we are confident that our range is at par with the international standards and are capable of meeting demands of our clients.
Under the able guidance of our mentor, we have come a long way since our beginning and are still progressing with full vigor to surpass all heights in the industry. Leveraging on our ultra-modern designing and fabrication facilities, we are further able to customize our range as per the needs of our clients.
Designed to perfection, our range of industrial supplies has received an overwhelming response from clients based across the globe. Further, maintaining consistency in our quality standards, meeting consignment deadlines and following ethical business practices have helped us to etch a reputable position in the highly competitive industry. Our range includes stainless steel fabrication services, industrial flanges, steel flanges, stainless steel flanges, duplex stainless steel flanges, carbon steel flanges, alloy steel flanges, nickel alloy flanges, alloy flanges, monel alloy flanges, hastelloy flanges, titanium alloy flanges, alloy-20 flanges, copper alloy flanges, stainless steel products, stainless steel pipes, stainless steel tubes, stainless steel butt weld fittings, stainless steel forged pipe fittings, stainless steel olets, stainless steel fasteners, stainless steel plates, stainless steel sheets, stainless steel round bars, duplex stainless steel products, duplex pipes, duplex tubes, duplex butt weld fittings, duplex forged pipe fittings, duplex olets, duplex fasteners, duplex plates, duplex sheets and duplex round bars.
Infrastructure
We have established a state-of-the-art infrastructure at Mumbai, maharashtra, India, to manufacture a quality range of Steel Pipes, rods, wire, pipe fittings etc.. This facility spread over a sprawling area and is segregated in separate sections for an effective rate of production. Its various sections are:
Manufacturing unit with assembly shops
Quality control unit
Research and development unit
Warehousing and packaging unit
All these units are lead by efficient professionals who work in close co-ordination to offer our clients an extensive range of Thermally & Mechanically Treated Steel & Reinforced Steel. Our manufacturing unit is equipped with requisite advanced and latest machines such as CNC machines & special – purpose machines. Through this infrastructure facility, we are capable of meeting the bulk requirements of Construction Industry with a quality product range in timely manner.
Quality
Quality is the hallmark of Ramesh Steel Corporation. Being a quality conscious company, we work towards the attainment of offering quality and durable range of hastelloy products, hastelloy pipes, hastelloy tubes, hastelloy butt weld fittings, hastelloy forged pipe fittings, hastelloy olets, hastelloy fasteners, hastelloy plates, hastelloy sheets, haselloy round bars, titanium products, titanium pipes, titanium tubes, titanium butt weld fittings, titanium pipe fittings, titanium olets, titanium fasteners, titanium plates, titanium sheets, titanium round bars, alloy-20 products, stainless steel fabrication services, alloy-20 pipes, alloy-20 tubes, alloy-20 butt weld fittings, alloy -exporter0 forged pipe fittings, alloy-20 olets, alloy-20 fasteners, alloy-20 plates, alloy-20 sheets, alloy round bars, copper alloy products, copper alloy pipes, copper alloy tubes, copper butt weld fittings, copper alloy forged pipe fittings, copper alloy olets, copper fasteners, copper plates, copper sheets, copper round bars, customized fabrication, fabrication services and customized fabrication services. At our quality department, we have all the requisite tools
Dev Darshan Metal is a dynamic group, which was established over a decade ago to cater to growing demands of stainless steel raw materials. We have a team of young visionaries who end eavour for excellence in every aspect related to our products. As importers, dealers & stockists with huge stocks Dev Darshan Metal become within one of the most reliable source for quality within a short span. We are registered with the best of semi-govt., govt., private & multinational companies. Our aim is to provide our buyers with everything in stainless steel under one roof viz. Dev Darshan Metal.
Ped certified manufacturer of PTFE COATED fasteners like bolts, nuts, washers, threaded rod. Materials included inconel, monel, hastelloy, duplex and super duplex steel fasteners. Xylan Coating, PTFE coating dacromet coating is our speciallity.
Since the past few years we have expertise in all exotic grades of fasteners meeting custom requirements if our esteemed clients varying from aeronautics to general purpose applications.
Fasteners are a crucial part of our manufacturing line.
Our manufacturing range in metric sizes ranges from m1-m150
and imperial size ranges from 1/4″-6″ and #1-#20 in numeric inch series.
some of the most known fasteners are mentioned below
Stainless steel fastener range are manufactured in the following grades
- 410 stainless steel fasteners used for martensitic applications
- 304 stainless steel fasteners used for general purpose applications
- 304l stainless steel fasteners used for cryogenic applications
- 309 stainless steel fasteners used for high temperature applications
- 310 stainless steel fasteners used for high temperature applications
- 316 stainless steel fasteners used for corrosive environments
- 316l stainless steel fasteners used for sea water applications
- 317l stainless steel fasteners used for corrosive environments with high temperature applications
- 321 stainless steel fasteners used for high temperature applications
- 347 stainless steel fasteners used for high temperature applications
- 348 stainless steel fasteners used for high temperature applications
- a286 fasteners used for high temperature applications like aerospace.
Apart from stainless steel we also produce alloyed stainless steel fasteners which are expensive as compared to austenitic and martensitic stainless steel known at nitronic stainless steel below are the grades mentioned.
for high temperature applications, a cheaper alternative as compared to nickel alloys are nemonic alloys mentioned below.
For corrosive environments we produce monel fasteners namely
Corrosion and high temperature resistance both can be achieved in the below inconel fasteners.
- inconel 600 fasteners
- inconel 603 fasteners
- inconel 602 fasteners
- inconel 601 fasteners
- inconel 625 fasteners
- inconel 617 fasteners
- inconel 718 fasteners
- inconel x 750 fasteners
- inconel 686 fasteners
high temperature fasteners generally used for aeronautics are mentioned below.
high temperature plus high corrosion resistant hastelloy fasteners are manufactured in the following four grades at torqbolt
99% pure nickel based fastners used for special applications.
titanium and aeronautics have a very old relation and particularly in the following 2 grades.
if better corrosion resistant fasteners are required as compared to stainless steel, silicon bronze and copper nickel is used.
high temperature alloy steel available at cheaper rates as compared to nickel alloys.
Super high austenitic and precipitation hardening stainless steel grades
- 330 stainless steel fasteners
- 904l stainless steel fasteners
- 254 smo fasteners
- alloy 20 fasteners
- 17 4 ph fasteners
- 15 5 ph fasteners
- al 6xn fasteners
Dual Phase stainless steel fasteners with high prep ration used for extremely corrosive environments with high toughness,
- duplex 2205 fasteners
- duplex s31803 fasteners
- duplex 2507 fasteners
- ferralium 255 fasteners
- super duplex s32760 fasteners
- s32520 fasteners