accesorios de bridas ha sido un fabricante y exportador profesionalmente administrado de bridas, tuberías, tuberías. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades.
What is Gate valves
Gate valves are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoid high replacement costs.
Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, a partially open gate can vibrate from the fluid flow
Gate valves are mostly used with larger pipe diameters (from 2″ to the largest pipelines) since they are less complex to construct than other types of valves in large sizes.
Main gate valve parts of a gate valve are: body, seat, gate, stem, bonnet and actuator. The main operation mechanism is very simple. When the handwheel is turned, it rotates the stem, which is translated into the vertical movement of a gate via threads.
There are three ways to classify the gate valve.
Types of Disk
Solid taper wedge
Flexible wedge
Split wedge or Parallel disks Valve
Types of Body Bonnet Joint
Screwed Bonnet
Bolted-Bonnet
Welded-Bonnet
Pressure-Seal Bonnet
Types of Stem movement
Rising Stem or OS & Y Type (Outside Stem and Screw Type)
Non-rising Stem type
Gate valvesare used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services.
Some special gate valve is used in slurry and powder product also such as knife gate valve
Steel tubes India is manufacturer and exporter of cold drawn seamless, welded and ERW steel tubes and pipes.Steel Tubes India is industrial steel pipes suppliers to Oil & Gas piping, petrochemical refineries & Chemical processing industry.We are Stockist & Supplier of Stainless Steel, Alloy Steel, Carbon Steel, Mild Steel, Nickel Alloys in form of Seamless Tubes, Welded & ERW Pipes & Tubes.
Changzhou Tengyue Special Material Technology Co., Ltd ( called in short of Tengyue SMT )
Tengyue SMT is one of leading manufacture and supplier of seamless stainless steel tubes and pipes, duplex steel tubes and pipes and nickel-based alloy steel tubes and pipes for 30+ years. With the trust and support of 500+ partners, our products are applied in more than 50 global markets.
Striving for the high-quality products and constant technological innovation, Tengyue SMT established long-term industry-university-research relations with Changzhou University and Metal Institute, Meanwhile, we actively participate in national science and technology projects and acquired the key technologies of heat transfer tube manufacturing. By carrying out continuous systematic research, the company obtained 25 national authorized patents, including the authorized invention patent closely related to the production technology of the project product “Manufacturing Process of Special Stainless Steel Tubes for Double Tube Sheet Heat-exchangers “.
Certification & Credit Obtained: ISO, Special Equipment (pressure piping components) Manufacturing Licenses and Pressure Vessel PED, etc; in 2019, it obtained E-Park legal person credit certification level A and product quality rating level B.
Manufacturing Annual Capacity: 10000tons
Dimension: OD.6.0 ~ 219.0mm, W.T. 1.0 ~ 22.0mm, Length up to 25 meters.
Materials: 304 & 316 series, duplex steel, and nickel Base alloy 6 and 8 series
Standards: GB, ASTM / ASME, JIS, EN and DIN
Products Applied in key field of petroleum, petrochemical, chemical machinery, nuclear power, boilers, heat exchangers, ships, papermaking, textiles, chemical fiber machinery, medical equipment, environmental protection and other industries.
By constantly updating the production line, improving the production process and the management system and perfecting the detection system, Tengyue Special Material wholeheartedly provides customers with high-quality and highly reliable stainless steel products.
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main-line. It is a short piece of pipe with a lateral outlet. Pipeline Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings, widely used in pipe networks for conveying liquids and gases.
How many types of steel pipe tee?
According to material types there are:
Carbon Steel Pipe Tee
Alloy Steel Tee
Stainless Steel Tee
According to branch diameters and functions there are:
Equal Tee
According to connection types are:
Butt Weld Tee
Socket Weld Tee
Threaded Tee
Carbon Steel Tee VS Alloy Steel Tee VS Stainless Steel Tee
Carbon Steel Tee
Carbon steel tee material: ASTM A234 WPB, WPC; MSS SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, 60, 65 and 70.
ASME/ANSI B16.9 for butt weld tee fittings,
ASME/ANSI B16.11 for socket weld and threaded tee fittings.
Alloy Steel Tee
Alloy steel material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
Stainless Steel Tee
Stainless steel standards: ASTM A403 (common standard for stainless steel pipe fittings.
YARONG is leading supplier, exporter & manufacturer of pipe fitting tee in China. Our products are mainly exported to Korea, Japan, the United Arab Emirates, Saudi Arabia, Egypt, the United States, Australia, Singapore, Indonesia, Middle East countries.If any problems occur during the production process, we will be very honest and communicate with you to find a solution together.
Nansteel Manufacturing Co.,Ltd manufacture and supply differenet steel products, like
seamless steel pipe, carbon steel pipe, stainless steel pipe, casing etc.For
more,visit:https://www.nan-steel.com/
Rafit Metal & Alloys produces and Exports impeccable and super compound darting which incorporates: Hex screw, Hex Nuts, Stud fasteners, Threaded Bars, Washers, Hex attachments and so forth according to guidelines ASTM, ASME, DIN and UNI. The application enterprises are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/Offshore).
Unifit Metalloys is one of the leading Pipes Manufacturer, Dealer, Supplier and Exporter of Buttwelded Pipe Fittings, Socket Weld Fittings, Threaded Fittings, Forged Fittings, In India. Quality Forge and Fittings is the name of a brand trusted worldwide and used in all leading industries. Trust is the synonym for Quality Forge and Fittings.
We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,
Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In The Industries Related To The
Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps & Petrochemicals,
Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.
Materials:
PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.
REGARDS
ARVIND JAIN – SALES HEAD
R-PIPE OVERSEAS
T: +91 22 6659 5201
M: +91 9930551137
Whatsapp: +91 9082065807
Skype: asj.rpipe
E: info@rpipeoverseas.com & rpipeoverseas@gmail.com
W: http://www.rpipeoverseas.com
A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,
PB Marg, Mumbai – 400008. (INDIA)
GST TIN NO.: 27ALTPJ6984G1ZB
Somos un fabricante profesional de bridas, accesorios de tubería, accesorios forjados en la India, nos especializamos en la fabricación de todos los tamaños, estándar, tipo, etc. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades. Desde material no estándar altamente especializado hasta artículos listos para usar, desde la producción hasta el prototipo, desde mínimos bajos hasta corridas de fábrica, el fabricante de bridas tiene la experiencia para resolver sus requisitos más difíciles.
Dear Sir,
We would like to introduce our self as one of the leading Exporter , Importer , Stockist & Supplier in India For Nickel based Alloys, Titanium, Monel, Nickel, Inconel, Incolloy , Hastalloy. In form of Sheets, Plates, Coils, Foils , Pipes & Pipe Fittings, Rods, Wires, Circles, Rings, Flats, Angles, Channels Weldolets , Threadolets , Bushing , Female Connector, Spares & Foundation Fasteners in any Grade , in any Size & as per your Drawing
Tubos is the world’s leading carbon steel, alloy steel, and stainless steel tube manufacturers in Mumbai, India. Provide a diverse range of products and meets the highest quality standards. Our goal is to comply with the requirements established by our Quality Management System, in which customers, suppliers and key actors are included. Tubos complies with all international standards regarding the products we manufacture and the final uses of those products and also carry out bespoke mechanical operations upon request. We have the experience staffs in the steel industry that they can provide the access to best-in-class processing for steel pipe and tubes, including laser cutting, saw cutting, bending, and more than the customers need them exactly. |
Tycoon Piping is well known for his trusted exporters of best precision tubes in the world. We supply both seamless and welded pipes, in a wide range of stainless steel, titanium, nickel and zirconium alloys. Tycoon Piping is the market leader in supplying of Hot Finished structural hollow sections in the UK and almost 25 years of experience in logistics, stockholding, in-house processing, and sector-specific requirements. We provide the best product guarantee to our clients with full satisfaction. |
Metallica Metals is known worldwide as the most competitive group in the world of Stainless Steel having its headquarters in Mumbai – India. It was incorporated in the year 1975 by 3 dynamic leaders named as Mr. Babulal Mehta, Mr. Jugal Mehta & Mr. Vallabhchand Mehta & they are the reason behind the exponential growth of Metallica Metals.
Liaoning Panjin Tiangong Precision Casting Co., Ltd. is a professional manufacturer integrating precision Lost wax casting, heat treatment and mechanical processing design and research and development. It is located in Panjin, a beautiful wetland capital with advantageous geographical position and advanced traffic. The company covers an area of 13,000 square meters, employs 105 people, and has an annual production capacity of 150 tons.
Specializing in the production of stainless steel, heat-resistant steel, wear-resistant steel, two-way steel, carbon steel, copper alloys, aluminum alloys and other alloys of precision casting products. The production facilities include Taiwan Yiying brand waxing machine, two large-scale cantilever waxing machines, Germany-made OBLF direct-reading spectrophotometer, German screw-type air compressors, four medium-frequency electric furnaces and electric roasters. , natural gas roasters, tunnel kilns, casting robots, well-type heat treatment furnaces, bench-top heat treatment furnaces, etc. The testing equipment includes air compressors, hardness testers, microcomputer screen display impact testers, computer screen display universal testers, hydraulic gap broaching machines, Notch projector, automatic low temperature box and so on. Products related to pump valve, railway parts, auto parts, mining machinery parts, petrochemicals, shipbuilding hardware, military parts, power accessories and other fields, and Europe and the United States, Japan and South Korea companies have a good relationship of cooperation.
In the production and operation, the company fully implements ISO9001: 2000 quality management system, PED certification, strict quality control. At the same time advocating the ISO14000 environmental management system.
Tiangong Precision Casting is willing to work hand in hand with you to create a better future!
Kogyo Steel Co., Ltd., a major Japanese manufacturer of Stainless Steel, Duplex Steel, Nickel Alloy & Titanium pipes & tubes. Headquartered in Tokyo & Founded in year 1984, the company by the late 1990s was one of largest japansese steel producers.
Kogyo Steel Co., Ltd., provides total piping & tubing solutions by manufacturing of Stainless Steel, Duplex & Super Duplex, Nickel Alloy, Titanium Pipes & Tubes. The strength of the Kogyo Steel Co., Ltd., is in manufacturing products for critical applications by meeting the stringent requirements which are then tested in the in-house Laboratory accredited to ISO 17025. The products are supplied in niche market such as Oil & Gas, Refinery & Petrochemical, Dairy, Chemical & Fertilizer, Thermal, Solar & Nuclear Power, LNG, Desalination, Defence, Aerospace, Chillers & Cooling system, Pulp & Paper Industry, Automobile etc. This makes the company an ideal choice for major EPC Contractors, project owners & process licensors across the globe.
“Koygo Steel stands by its commitment of delivering nothing but the best by bringing their technical expertise at work.”
Ashwin Impex are one of the leading manufacturers, suppliers and exporters of stainless steel, carbon steel, alloy steel, duplex steel, high nickel alloy pipes, tubes, butt weld pipe fittings, flanges, sheets, plates, coils, round bars, rods, forged fittings, fasteners in Mumbai India.
Our Products
Stainless Steel 304 Pipe Fittings
Stainless Steel 304 Flanges
Stainless Steel 304 Fasteners
Stainless Steel 304 Sheets & Plate
Stainless Steel 304L Pipe Fittings
Stainless Steel 304L Flanges
Stainless Steel 304L Fasteners
Stainless Steel 304L Sheets & Plate
Stainless Steel 316 Pipe Fittings
Stainless Steel 316 Flanges
Stainless Steel 316 Fasteners
Stainless Steel 316 Sheets & Plate
Stainless Steel 316L Pipe Fittings
Stainless Steel 316L Flanges
Stainless Steel 316L Fasteners
Stainless Steel 316L Sheets & Plate
more info please visit us http://www.ashwinimpex.com
asme b16.9 elbow manufacturers
We have specialization to manufacturer customized asme b16.9 elbow per customers’ specifications.Micron Steel and Tubes Supply large amount of High Quality asme b16.9 elbow manufacturer Stock World Wide at Best price. we welcome small quantity order. We are manufacturing ASME B16.9 Pipe Elbow in seamless or welded form, it proudly caters the needs of our customers in Oil & Gas, Power Generation, Petrochemical, and Industrial Construction, inclusive of Upstream, Midstream, and Downstream sectors.
asme b16.9 elbow manufacturer, ansi b16.9 elbow Manufacturer, asme b16.9 pipe elbows dimensions
ISO Certified Suppliers, Exporters, and Stockist of ASME B16.9 Elbow Manufacturer in India. Buy top quality ANSI/ASME B16.9 Elbows Available in All Dimensions at most Reasonable Prices.
Contact Us :
Phone: 022 67439119
Tele fax:022 2380 4268
Email: info@micronsteel.com
It gives us pleasure to introduce ourselves as a leading manufacturers of Pipe & Fittings. Mangalam Metal Corporation is a dynamic group, which was established over a decade ago to cater to growing demands of stainless steel raw materials.
Ranflex Metals is a 15 years old company to cater the growing demands of stainless steel and nickel alloy raw materials globally. As leading stockiest in INDIA with over 800 ton stock in high nickel alloy products, Ranflex Metals become one of the most reliable source for quality product within a short span of time. We have ready stock of High Nickel Alloys in form of pipe, sheet, coil, bar, fittings, flanges & fasteners-bolts-screw. We are first choice of our clients in more than 90 countries as a supplier of Nickel Alloys , we have major clients in UAE, INDIA, SaudiArabia