We are a leading manufacturer and exporter of Black & Galvanised ERW steel pipes and tubes. AST pipes pioneered its operations 25 years back and has built a large customer base since its inception. We have successfully forged a commanding position in the domestic markets as well as International ones too.
We now have diversified into producing related products like CR sheets and also increased the size of our pipes from ½ inch up to 16 inch upto 10mm thickness which is an edge that we have over our competitors. Since our early days of inception, we have grown and diversified our operations into our sister concerns like Gaurang products and Haryana Pipe Ltd with dedicated line of production.
We now posses the technical know-how and infrastructure to produce a vast range of Steel products . In more than two decades of our existence, we have also built up a lasting relationship with our clients consisting of reputed corporates all over the globe.
Buy best quality of stainless steel flange from PED approved Regal Sales Corporation. We are India based manufacturer and supplier, offer a wide range of Bolts, Nuts, Set Screws, Pipe Flange, Washers and Fasteners as per DIN, ISO, ASTM and ASME Specifications on reasonable rates. Visit regalsalescorp.com now for trade inquiry.
Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
- Copper mould tube( square, rectangle and round )
- Crystallizing equipment of continuous casters
- Mould cooling jacket.
- repair of copper tube moulds
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion ,and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
INNER SURFACE COATINGS
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
SPECIFICATIONS OF COPPER MOULD
Square 60 x 60 – 350 x 350 (mm)
Rectangle 120 x 160 – 180 x 300 (mm)
Diameter 100-400 (mm)
Size(mm): 90×90, 100×100, 110×110, 115×115, 120×120
130×130, 135×135, 140×140, 143×143, 150×150
155×155, 160×160, 165×165, 175×175, 180×180
200×200, 220×220, 100×170, 100×173, 130×240
150×200, 150×210, 150×220, 160×200, 160×220
150×225, 160×235, 165×225, 175×225, 180×220
200×240, 240×240, 235×235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
Elbow- Banded Hot-dipped Galvanized Malleable Iron Pipe Fittings with BS Thread
Product Item | Wholesale malleable iron pipe fitting: elbows, tees, sockets, bends, nipples, unions, crosses, flanges, plugs, backnuts, crosses over, round caps, etc. |
Material | Malleable cast iron |
Technics | Casting |
Size | 1/8″-6″ |
Edges | Banded, beaded or plain; with or without Ribs. |
Malleable cast iron elbow Thread Standard | BS ANSI & DIN |
Finish | Black, Eclectic Galvanized, Hot Dipped Galvanized, all be antirust treatment |
Shape | Equal, Reducing |
Grades | Heavy series, Standard series, Medium series, Light series |
Packaging | Cartons, woven bags, wooden boxes |
Quality Control | Excellent material, precise angles, good antirust property |
malleable iron pipe fittings manufacturer Usage | Suitable for joining pipe lines of team, gas, oil, air |
Certificate | ISO9001:2000; SGS Certificate |
Others | 1.Special design available according to requirement. |
2.MOQ: 1000pcs. Negotialble as per type. | |
3.Packaging:In cartons or bags with/without pallet |
Kitchen sink copper faucet LED draw-in kitchen dishes cold and hot water faucet
Great Flexibility: Pull down sprayer with black rubber hose covers a wide range of areas for easy cleaning and washing. Copper water purification kitchen faucet Easy Operation: Single lever handle for effortless and precise water temperature and volume control. Built In LED: Water powered LED light in changing hues creates a moody ambiance and offers extra relaxation.
– The LED light is powered by water flow, and will be activated once the water is turned on.
– Constructed from solid brass for durability and reliability.
– replacement hose for kitchen faucet factory Finished in a high quality, corrosion resistant polished chrome.
– Features a 360-degree swivel pre-rinse spout design and black flexible rubber spray hose.
– Not suitable for low pressure. Minimum required water pressure is 0.1 MPa (1 bar).
– All mounting hardware and hot/cold waterlines are included.
Copper pull basin faucet cold and hot mix water bath basin faucet
Jijin Copper hot and cold basin faucet Double Spouts: Pull-out sprayer provides powerful spray or aerated stream. Filtering spout offers purified drinking water. Convenient & Efficient: Swivel design provides water at easy access. Pull-out sprayer can reach every corner for any task. Easy Operation: Double handles ensures separate, precise control over the water flow of the 2 spouts, simple in use and look.
– Please note that this Copper hot and cold basin faucet wholesale does not come with filter system.
– Constructed from solid brass for durability and reliability.
– Finished in a high quality, corrosion resistant polished chrome.
– hot and cold mixed water list kitchen faucet Features a 360-degree swivel pre-rinse spout design.
– Separate water way for filtered water.
– Includes a stainless steel pullout hose that can be extended to 23.6″ (600mm).
– Not suitable for low pressure. Minimum required water pressure is 0.05 MPa (0.5 bar).
– All mounting hardware and hot/cold waterlines are included.
We are one of the leading Suppliers and Exporters of Tube Fittings, Pipe Fittings Threaded, and Ferrule Fittings, Needle Valves, Ball valves, Manifold Valves, hex nipple in Mumbai India.
Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
ductile iron pipeline wholesale have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe price list is very reasonable.
Cast iron pipe drain pipe、the cast iron sewage pipe and the cast iron gas pipe are widely used.
The wall thickness of the 150mm cast iron pipe is 6mm.
Ductile iron feed pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
Ductile iron feed pipe supplier is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
ductile pipe manufacturer is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
Tongmao Ductile iron feed pipe have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe lengths is generally six meters, which can also be customized.
If you want to know the ductile iron pipe sizes and dimensions, please contact us
The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance.
rac valves – ball screw gate valves supplier is a type of large bore gate high pressure valve which were improved from Cameron FLS-R gate valve, its the main component of frac tree, the frac valve is often used on the top of the wellhead on high pressure oil well, can do the frac job for Isolating the fluid from the well. The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance.
Features:
Valve with Ball Screw
Ball screw structure lowers operating time
Stem structure is pressure balanced with switch indicator
wellhead equipment manufacturers Specifications:
Applies to big bore high pressure system
Working pressure:2000 PSI-20000 PSI
Connection: Flange* Thread、Union、BW
Size: 1 13/16″-7 1/16′
Working temperature:K. L .P. R .S. T. U. V
Material Class :AA.BB.CC ,DD .EE.FF.HH
Specification level: PSL1-PSL4
Performance Requirement: PR1. PR2
AQE wellhead valves Application: Oil, Chemical industry, etc.
Medium: Oil、Gas、Water.etc
Learn more information about wellhead equipment,you can visit our website.
Application:
Hot Rolled Stainless Steel Clad Plate is extensively used in Oil, chemistry, electricity, paper making, alkali production, watering works, vehicles, salt, medicine, food and also public facilities.
Advantage for KLS Stainless Steel Clad Plate:
Stainless steel dressed plate makes the combination far more stronger than that of the surge bonding, more eco-friendly than the explosion bonding, and also the turn-around time is quicker. The toughness of the bonding interface is uniform that makes the anti-corrosion layer totally used, and also hot-rolled cladding modern technology can generate a clad plate with extremely with and also ultra length.
Machining Methods for Stainless Steel Clad Plate China :
Eruptive Clad: Overlap stainless plate on carbon steel plate with a cushion in middle to leave particular space.Explosive material will be paved externally of stainless plate and when eruptive product exploding, high energy can make stainless plate effect carbon steel plate with high speed to joint.In optimal condition, the strength for square mm could get to 400 Mpa.
Thickness Scope:10 mm-300mm.
Warm Rolled Clad: Hot rolled stainless steel dressed plate is rolled of stainless and also carbon steel plates in vacuum condition.In such process, the attired plate and base plate must be in pure clean condition.Besides, for improving the stamina of conbining, there are also a collection of technological approaches with physics and chemical therapies.
Density Scope:0.6 mm-50mm.
Cold Rolled Clad: Cold rolled Stainless dressed plate is made after annealing-pickling-cold rold-mid annealing-pickling manufacturing process to stainless-steel clad plates.This material is with far better yield stamina than exact same grade stainless plate.Min density would get to 0.6 mm.
Welcome to Asiamet Steel Industries! On behalf of our Team and Management, we would like you to know that we are so grateful of having you. We hope our relationship will be pleasant, profitable and mutually beneficial.
Over 50 Years of Excellence in Steel Business! Asiamet is one of the only suppliers worldwide that offer stainless steel plates, stainless steel coils, stainless steel sheets, carbon steel plates, alloy steel plates in all major alloys from a single source. Asiamet stocks a wide range of sheets and plates, from 0.3mm to 100mm thickness. We specialize in supplying cut to size and shape carbon steel plates, stainless steel sheets, stainless steel plates and stainless steel coils. Asiamet Steel Industries is the local leading stainless steel sheets, plates and coil processor and exporter, based in India. We can offer stainless steel sheets with polished surfaces, 2B finish, No. 4 finish, sating finish, hairline -finish, etching, embossing and various other custom finishes to suit customer requirements. Stainless steel coils can be offered in full standard size coils or in custom widths as strips or sheets in custom length. Asiamet is a specialized supplier of sheets, plates and coils to the defense, aircraft, textiles, aerospace, marine, chemical and oil and gas industries.
Our steel pipes & tubes division is one of the largest manufacturers and importer of steel seamless and welded pipes in India. The management of Asiamet has been serving India and the global market place developed into a large integrated enterprise for processing and marketing of stainless steel sheets, stainless steel plates and stainless steel coils. Our raw materials are sourced directly from popular mills in India and across the world.
As the years have passed our steel business has grown from a local distributor to become one of the leading manufactures, exporters and suppliers of stainless steel, aluminum, carbon steel and alloy steel plates, plates, coils, rods, bars, angles and channels worldwide.
For all your stainless steel sheets, plates and coil requirements contact us on +919619672006 or write to us on sales@asiametsteel.com
An ISO 9001:2008 Certified Company, Steel Pipes & Tubes Industries is India’s most trusted manufacturer, exporter and supplier of stainless steel tubes (ASTM A 312 304/304L, 316/316L), carbon steel pipes (ASTM A A106, A53, API 5L), alloy steel seamless pipes (ASTM A335 P11, P22), mild steel pipes, industrial steel tubes, galvanized steel pipes and black steel pipes.
We can manufacture and supply steel pipes which can be fabricated to customers design and specification in a variety of length and thickness requirements. We can also offer cold drawn seamless steel tubes to meet the custom design and specifications of our customers. We specialise in the manufacture and supply of cold drawn seamless steel tubes, and large diameter stainless steel welded pipes (100% X-Ray Tested). ISO 9001:2008 Certification ensures consistency in our operations and testing procedures.
Steel Pipes and Steel Tubes supplied by Metline Pipes & Tubes are used across wide range of industries including food processing, power generation, oil and gas, petrochemicals, petroleum pipelines, medical equipment, biopharma, pharmaceuticals, electrical engineering, fertilizer industry, dairy processing, boiler manufacturing and nuclear energy among others.
METLINE has been proudly servicing the steel pipe industry for over 40 years, as a major supplier and manufacturer of custom size steel pipes and steel tubes. We are the exclusive suppliers of stainless steel welded pipes, stainless steel seamless tubes, stainless steel tubing, alloy steel seamless pipes, boiler steel tubes, heat exchanger tubes, capillary tubes, coiled tubing, and galvanized steel pipes. We are serving all major cities and countries in their needs for steel pipes and steel tubes.
Our products are supplied to all major Industrial areas and cities in India such as Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi.
Our high quality steel pipes, good customer service, and in house pipes and tubes processing capabilities have made us one of the emerging suppliers for steel pipes and tubes in Middle East countries including Bahrain, Cyprus, Egypt, Iran, Iraq, Israel, Jordan, Kuwait, Lebanon, Oman, Palestine, Qatar, Saudi Arabia, Syria, Turkey, United Arab Emirates and Yemen.
India’s #1 Supplier of Stainless Steel Pipes/Tubes, Chrome Moly Pipes,Black Pipes, Galvanised Pipes, Carbon Steel Pipes
Stainless Steel Pipes, Carbon Steel Tubes, Alloy Steel Tubes, MS Pipes Production and Stock Range
Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type: Seamless / ERW / Welded / Fabricated / CDW
Key Steel Pipes & Tubes Products & Grades
- Stainless Steel Seamless Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
- Stainless Steel Welded Pipes & Tubes – 304, 304/L, 316/L, 904L, 310S, 321H, 347H, 446
- Square Stainless Steel Pipes, Round Stainless Steel Tubes,Rectangular Stainless Steel Pipes & Tubes
- Carbon Steel Seamless Pipes as per ASTM A 106 Grade B/API 5L Grade B/ASTM A 53 Grade B
- Carbon Steel Seamless Tubes as per BS 3059, ASTM A 179, ASTM A 192, ASTM A 210 GR.A1
- Alloy Steel Seamless Pipes as per ASTM A335 Grade P1/ P5/ P9 / P11/ P12 / P22 / P91
- LTCS Pipe – Low Temperature Carbon Steel Pipes as per ASTM A 333 Grade 6
- Alloy Steel Seamless Tubes as per ASTM A213 Grade T5/T9/T11/T12/T22/T91
- ERW Black Pipes as per IS:1239/I, IS: 3589 Grade 330 or Grade 410
- Galvanised Pipes as per IS:1239/I
- Square and Rectangular Steel Pipes as per IS: 4923
- ERW Boiler Tubes: BS 3059, ASTM A 214
- Air Pre Heater Tubes to BS: 6323 PART V
- Hydraulic Tubes to DIN 2391 ST. 35, ST. 45 & ST. 52
- Seamless Heat Exchanger Tubes ASTM A 179
- CDW TUBES IS: 3074 or BS 980
- CRCA ERW Tubes to IS 3601 OR IS 3074
- Stainless Steel Electropolished Pipes Manufacturer/Supplier
- Alloy Steel Fittings Manufacturer – ASTM A234 WP5, P11, P22, P91
BESTAR is a China-leading product service provider and exporter of steel pipe, also the most valuable subsidiary of Shinestar Holdings Group. BESTAR passed the SGS Certification of China Supplier System, ISO9001 Quality Management System Certification, ISO 14001 Environment Management System Certification, ISO45001 Occupational Health & Safety Management System Certification and CE certification, got comprehensively high score in the HuaXia D&B assessment and has been rated AAAAA credit enterprise by China Credit Evaluation Association. BESTAR, committed to provide professional service to global clients including the lowest price support, professional technical support, flexible payment methods, strong financial support, the integrated procurement program as well as comprehensive bidding program to help customers create value, has become the most reliable partner in the steel pipe industry.
Product: | Seamless Stainless Steel Pipe, Stainless Steel Seamless Pipe |
Size: | OD: 3-2500 mm |
WT: 1.0-150 mm | |
LENGTH: 5.8/6/11.8/12m | |
Pipe Standard: | ASTM A213, ASTM A312, ASTM A269, ASTM A778, ASTM A789 |
DIN 17456,DIN 17457,DIN | |
EN 10216, BS 3605, JIS 3459, JIS3463, GOS T9941 | |
Material: | 304/L,316/L,201,202,301,347/H,316Ti,309s,310s |
Process: | Cold drawn, Cold rolled, Precision Rolled |
Finish: | Annealed & pickled, bright annealing, polished |
We are one of the leading manufacturers, suppliers and exporters of stainless steel sheets, ss sheets, ss plates, ss coils, ss foils, ss polished plates, steel perforated sheets, stainless steel plates, stainless steel coils, stainless steel strips, ss foils, ss shim sheets, steel foils, ss shim sheets, steel polished plates in India.
ISO9001:2015, PED 2014/68/EU certified. Zhejiang Guanyu Steel Tube Co., Ltd is specialized manufacturer of High Quality Stainless Steel Tubes & Pipe, Nickel Alloy Tubing & Pipe in China. Production area covers an area of 35,000 square meters. Annual output capcity more than 10,000 metric tons.
We have built a complete quality management system and organization according to ISO 9001:2015 and PED 2014/68/EU. Quality control begin with an audit trail and continues from the point of steel melting. for the raw materials, we select the best quality raw material for our customers. right through to the finished product. This level of attention to detail extends throughout the design and manufacturing chain, all kinds inspection will be all though the producing process ensure the Stainless Steel Tubes/Tubing/Pipe and Nickel Alloy Tubes/Tubing/Pipe finished in qualified. With destructive and non-destructive tests according to standard specification and customer’s special requirement, and including verification of performance by independent third-party test houses.
Hebei Huahui Valve Co.,Ltd (Botou Yaxing Fluid Equipment Co.,ltd) was established in 2003, specialize in designing and manufacturing various kinds of high quality valves and accessories, such as: Gate valve, Butterfly valve, Check valve, Strainer, Hudraulic control valve(float valve, pressure reducing valve, pressure relief valve,flow control valve),HVAC balancing valve,Air release valve,Rubber flexible joint and Stainless steel flexible joint,Pipe fittings(unicersal coupling, flange adaptor, repair clamp, saddle…) etc, which used in water supply and sewage system\ fire fighting system, and heating ventilation air conditioning system.
Hebei Huahui Valve Co.,Ltd is located in Botou Industrial Zone,Cangzhou City Hebei Province China.Our workshop occupying 150000 square meters, our manufacturing process include machining, shot blasting ,epoxy powder coating,assembling, testing, packing, which is the whole process of valve production from foundry to finished Products. Welcome old and new customers visit our factory and develop business with us.
Ans Pipes Pvt Ltd | ERW, Price list rate Seamless, GI Pipe, Square, Rectangle, Hollow Section , Box Pipe, Crc, MS Pipes TATA Pipe, APL APOLLO, PRAKASH SURYA, ASIAN, HITECH, JINDAL HISSAR in Ahmedabad, Changodar, Gujarat
STEEL PIPE, STEEL TUBE, BOX SECTION, ERW MS BLACK PIPES, GI PIPE, GALVANISED PIPES, RECTANGULAR PIPES, SQUARE PIPES, BOX PIPES, HOLLOW SECTION, APL APOLLO, JINDAL, TATA, ASIAN, SURYA, WELSPUN, HITECH |
Tycoon Piping is supplier of oil and gas piping materials and Tubing accessories, we are stocking distributor of leading suppliers of alloy steel and carbon steel pipe in India, stockist of Jindal, MSL and ISMT.We are approved supplier and distributor of Pipes , Tubes and Tubing in Alloy Steel, carbon steel and stainless steel, we are associated with reputed suppliers of LSAW, DSAW, SAW pipes in India.
Kamdhenu Group has in its list of manufacturing, marketing, branding and distribution of a diverse range of products including Reinforcement steel Bars, Structural steels, Binding Wire, Colour Coated Sheets, Plywood, and many more. Kamdhenu Group is the largest reinforcement bars manufacturing group in India. The group is manufacturing international quality TMT of Grade bars with best features for construction industry.
RANA® STEELS India Ltd., Muzaffarnagar (U.P.) since its establishment, is engaged in anufacturing of super quality Angle, T-Iron, Channel, Flat & Square of all ranges. RANA® PRODUCTS are manufactured & tested to suit the specific applications, chemical & physical properties are assured for a wide range of applications. Thus, customers have infinite options for making the choice for the best result and life long satisfaction. RANA® STEELS India Ltd. offers the best of the products & services to its quality-conscious customers. That’s why RANA® PRODUCTS, have become anonymous for quality which is unmatched. If you ask dealers, distributors, engineers, designers & fabricators their spontaneous reply and recommendation will be to use a single brand of steel “RANA® PRODUCTS” and nothing else. The firm faith has developed among users by repeated use of RANA® PRODUCTS, unmatched performance and reliability in quality, work ability and economy. We are doing continuos efforts in our plant (R&D) to improve our quality standard. Thus from a very hard work & rousting procedure now this single RANA® STEELS has turned into group of companies in a very short span of time, it is just done because of hard labour, quality consciousness, motivation, discipline & to adopt high class procedures for making RANA® PRODUCTS.