The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
Ornamental Iron Fence American Fence prefabricated ornamental fence panels
6′ Steel Flat Top Ornamental
Ornamental 6′ Steel Flat Top fencing adds a touch of quality to any yard and home. American Fence prefabricated ornamental fence panels are custom built for each section, built to 1/4″ tolerances and are numbered to ensure custom installation.
DETAILS
2″ Square posts
15/16″ x 1 1/4″ x 14 ga. Ribbed Channel Rails
5/8″ square x 18 ga. Pickets
Brackets
Flat Top 8′ Wide x 6′ Tall Three Rail Fence Panel
2″ Residential Ornamental Fence Post 93″
2-1/2″ Square x 96″ Gate Post
2″ Flat Cap
48″ x 72″ Flat Top Single Swing Gate
96″ x 72″ Overscallop Flat Top Double Drive Gate
https://www.qijiemesh-fencing.com/product-ornamental-iron-fence.html
5′ Steel Flat Top Ornamental
Ornamental 5′ Steel Flat Top fencing adds a touch of quality to any yard and home. American Fence prefabricated ornamental fence panels are custom built for each section, built to 1/4″ tolerances and are numbered to ensure custom installation.
DETAILS
2″ Square posts
13/16″ x 1 1/4″ x 14 ga. Ribbed Channel Rails
5/8″ square x 18 ga. Pickets
Brackets
Flat Top 8′ Wide x 5′ Tall Three Rail Fence Panel
2″ Residential Ornamental Fence Post 81″
2-1/2″ Square x 96″ Gate Post
2″ Flat Cap
2-1/2″ Black Flat Cap
48″ x 60″ Flat Top Single Swing Gate
96″ x 60″ Overscallop Flat Top Double Drive Gate
Qijie Ornamental Iron Fence:Qijie’s parent company Anping Shenghe Metal Wire Mesh MFG Co., Ltd was set up in 1999. It is located in Anping, which has a reputation of “home of wire mesh” in China. Qijie is particularly established for export by Shenghe. The company implements “one team, two brands” management system and development strategy! The main products are stainless steel insect mesh, fence panels, chain link fence, gabion baskets, woven screening mesh, welded wire mesh, expanded metal mesh, perforated metal and various wire products.
We still have 358 security mesh, are you interested?
Press-locked steel grating is fully welded by flat bar,(smooth flat bar, serrated flat bar, I shape flat bar), it also can be called pressure locked grating, it is made of low carbon steel or stainless steel.
With the performance of high bearing capacity, non-slip, anti-corrosion and easy to install and remove, pressure locked grating is widely used for ceilings, platforms, floors, fence and all kinds of cover in the factories, civil and commercial buildings.
Two press-locked steel grating with different mesh sizes which people often use: 33 mm × 33 mm, 33 mm × 11 mm.
Press-locked steel grating style has press-locked steel grating and semi press-locked steel grating.
Nevatia Steel & Alloys Pvt. Limited, the first Indian stainless wire company to have triple certification of ISO 9001 : 2008, ISO 14001 : 2004 and OHSAS 18001 : 2007, was incorporated in the year 1988 to manufacture Stainless Steel Wires for the International market. Our plants, equipped with comprehensive and modern manufacturing technologies, are situated at Tarapur, an industrial township, amongst the biggest in India and strategically located close to the port of Mumbai. – See more at: http://www.nevatiasteel.com/about/#sthash.hcF42Uc1.dpuf
Anti climb fence is the ultimate security fencing system. The close mesh is used in prisons and other secure facilities as it is virtually impossible to climb. The close mesh also means that the fence is very difficult to cut with anything but power tools.
Established in 1991 as a company specializing in the marketing and distribution of steel products and building materials, Marola is today one of the most effective and innovative companies in the retail sector of metallurgical products and building materials market in Bucharest and Ilfov County .
Experience , timeliness and reliability characterize us in business for 21 years, during which Marola managed to continuously improve its position in the domestic market.
Mission
Our mission is to provide our partners with a wide range of products, taking into account their preferences and necessity, providing steel products and building materials in the shortest time possible, both in industrial sites and in civil construction sites.
Objective
Since 2000, the company’s goal Marola became partners to ensure the best quality and price for the products sold.
Company Values
In 20 years we have learned that communication and understanding are two values worthy partners appreciated. Also in these 20 years we have learned to offer the flexibility and confidence of our partners need.
Founded in 1993, focused on the steel domain, Concast is a cross-sector leader with customer-focus, global quality standards as its key mandate. From being a pioneer in branding TMT Bars and occupying a pre-eminent position in the secondary steel sector in India – Concast is emerging as a diversified leader with robust investments of resources in state-of-the-art design & engineering, production, R&D, product testing & validation and top of the line HR practices.
The conception of Concast Group began with global excellence in steel& minerals and was later extended to the sectors of infrastructure and food.
Its manufacturing unitsare ISO 9001:2000 certified; every business is complemented with sound financial depth and apt human resources.
Concast, today, in its annual business of over 2 Billion Dollars and 10,000 employees is a legacy to explore not just growth but sustainable growth via pioneering efforts, customer orientation and integrity.
PRODUCT DETAILS
Barbed wire can be widely used as accessories for woven wire fences to form a fencing system or security system. It is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing.
Barbed wire is a protective net formed by mechanically winding barbed wire around the main wire through various weaving techniques.
Anti-corrosion, anti-aging, high durable. Barbed wire can be used with chain link or other fencing barriers for added security. It can discourage unauthorized entry and is suited to a variety of containment needs.
Mainly serves in isolation and protection of grassland, boundary, railway, highway,prisons, private residence, bank, bill printing factory, and also widely used in military base, industry, agriculture, animal husbandry, plantation for fencing.
Anping County Hualian Hardware Wire Mesh Co.,ltd. is located in Anping County which is famous as “the hometown of wire mesh”. Hualian is a professional manufacturer of stainless steel wire mesh and development of wire processed products. For many years, we have established business relationship with our old and new customers with our first-class technology, excellent management system and R & D capability. We insist on the policy of Emphasizing on Technology Innovation, Customers Satisfaction Oriented, Quality First and Building Good Reputation with our services.
Shenze Hongda Metal Manufacture Factory, founded in 1991, is a privately-owned enterprise, engaged in galvanized iron, black iron and nail. Our company has 160 staffs, including 15 administrators and 28 engineers, advanced production technology and mechanical equipment and annual production capacity of 20000 tons. We adopt premium resource, scientific process and overall management. Besides, we could do various models and types according to customers’ requirement. Our products are widely used in construction, greenhouse, mesh screw and nail manufacture.
Our company is located in Shenze County Hebei Province, Shide Railway, 307 National Way and Shihuang Expressway in the south, 80km away from Shijiazhuang, 300km away from Tianjin Port. We are easy to access by sea or land.
Holding the purpose of “striving for the survival by prestige, sincerely trades cooperation, competing by the quality, securing the developments by ability” unceasingly providing higher quality service for the customers. At the same time, many thanks to the new and old user continuously supports and faith to us. We HongDa Metalwork Factory, also unceasingly makes our efforts to provide more products, meets the different customers’ needs, enhances the quality of products. At products, the company has formed the certain sales network domestic and foreign, nonstoppingly enhances selling and after-sale service, provides the better development space for the customers, wish giving everybody to create more opportunities.
Adhering to the quality policy of “quality first, brand leading, sincere service and customers satisfaction”, we would like to make cooperation with clients for development and mutual prosperity!
Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
Chain Link Fence
A chain-link fencing (additionally referred to as wire netting, wire-mesh fence, chain-wire fencing, cyclone fencing, cyclone fence, or diamond-mesh fencing) is a type of woven fence usually made from galvanized or LLDPE-coated steel cord. The cables run vertically and are curved right into a zig-zag pattern so that each “zig” hooks with the cord promptly on one side and also each “zag” with the cord promptly on the various other. This creates the particular ruby pattern seen in this type of fencing.
https://www.yongkunmetal.com/product-chain-link-fence.html
The manufacturing of chain-link fencing is called weaving. A metal wire, often galvanized to reduce corrosion, is pulled along a rotating long and flat blade, thus creating a somewhat flattened spiral. The spiral continues to rotate past the blade and winds its way through the previous spiral that is already part of the fence. When the spiral reaches the far end of the fence, the spiral is cut near the blade. Next, the spiral is pressed flat and the entire fence is moved up, ready for the next cycle. The end of every second spiral overlaps the end of every first spiral. The machine clamps both ends and gives them a few twists. This makes the links permanent.
An improved version of the weaving machine winds two wires around the blade at once, thus creating a double helix. One of the spirals is woven through the last spiral that is already part of the fence. This improvement allows the process to advance twice as fast.
HeBei YongKun Metal Products Co., Ltd. Is located, in Anping County, Hebei Province, which is China’s Wire mesh Capital and the most famous wire mesh production base around the world. The company is committed to the research, development, production and sales of different wire mesh products, including wire mesh, deep processing of wire mesh,welded wire mesh, steel welded wire mesh, welded wire mesh, barbed wire, hexagonal wire mesh, stainless steel wire mesh, square mesh, mobile fence, 358 guardrail and other related products. Our products are good-looking, safe, and far exceed the highest standards of today’s domestic industry products in terms of overall design and environmental protection. They are easier to install and can be used longer. More information click here.
SMT Machines (India) Limited is an ISO 9001-2008 certified company and a Government of India Recognized EXPORT HOUSE, a well – organized & well – equipped Engineering Company situated on the G.T. Road (Near Industrial Focal Point), Mandi Gobindgarh, Punjab (India), one of the place consisting maximum number of Steel Producing Mills in Asia.
We are basically catering to the needs of the Steel Mill Industry with our services ranging from Engineering, Consultancy, Design and Development, Manufacturing & Exporting Highly Economical and cost effective Steel Rolling Mill Plants on Turnkey Basis. The Machining & Material Handling Capacity available up to 50 M.T. enables SMT to provide Engineering Assistance to Total Steel Making Industry for Hot Rolling, Cold Rolling, Pipe Plants (ERW, G.I., A. P. I. Grade) and Spares for Sugar & Cement and other Industries by way of manufacturing the Mechanical Equipments to customer’s design and specifications.
SAIL produces iron and steel at five integrated plants and three special steel plants, located principally in the eastern and central regions of India and situated close to domestic sources of raw materials. SAIL manufactures and sells a broad range of steel products
Mammoth International Group is a well-established and dynamic company group, including factories, production facilities, deep processing factories, trading, and sales. It has established itself with deep-rooted market knowledge and is secure in the marketplace with registered capital of 50 million RMB. Because of the group’s far-ranging base and extensive experience in a variety of industries, Mammoth can offer a wide range of products including steel products such as steel coil, steel pipe, angle steel, rebar, or any other steel product, construction material, iron ore, hardware, mechanical equipment, spare parts, electrical products, ceramics, tiles, paper products, plastic articles, textiles, consumer goods, art and glassware, and food products.
Mammoth has an extensive and comprehensive commodity information network which enables us to be a first-tier exclusive agent in China for a variety of companies in China and around the world. Mammoth has a history of forming stable and long-lasting relationships with our business partners, which has enabled us to grow our imports and exports to $30 million USD. Mammoth’s international team of dedicated and experienced professionals not only offers our clients and partners a variety of products and logistics solutions, but also goes to enviable lengths to work with our customers to solve any issue which may arise during the course of our relationship. This includes working through the complexities of import and export for overseas customers including but not limited to: exploring the Chinese market, product sourcing, goods inspection, locating and obtaining 3rd party certification, declaration, docking and ship booking, and more.
Our company mantra, “Guaranteeing the quality of our products, and providing the best service,” has enabled us to achieve the remarkable with the win-win attitude of all of our team members. Our goal is to create long-lasting relationships with our clients based on trust and commitment to only the best. We truly believe that partnerships based on trust and friendship with a long-term outlook have a much better chance to be mutually beneficial and rewarding for everyone involved. We look forward to working with you and cooperating towards a positive future.
We take immense pleasure in introducing ourselves as one of the leading Importer, Stockiest & Suppliers:
STAINLESS STEEL :: Seamless / ERW Pipes, Pipe-Fittings, Sheets, Perforated, Sheets, Plates, Circles & Ring, Rods, Wire, Wire-Mesh, Flats, Angles, Channels, SMP Rodes Eelectro etc. of Grades TP-304,304L,316,316L,321, 309, 310, 409, 410, 410S, 420, 430, 904, 904L etc..
S.S. & M.S. Fittings :: Seamless / ERW Stainless Steel Grade 202, 304, 304L, 309, 310 310S, 316, 316L, 321,
(B/W & S/W) 409 410 430 904 904L Elbow, Tee, Reducer, Long, Short, Stub end, Flanges, Nipples, Unions, Caps, Hex, Nipple, House Nipple, Coupling, Nut Bolts, Pipe Clamps, Dairy Fittings, Tricover, Clamp & Vales, and Industrial raw material etc.
ALLOY STEEL :: Seamless / ERW Pipes, Sheets, Plates, etc. of Grades EN-8, EN-9, EN24, EN-36,
EN-353, HCHCR – WPS, D2-D3, OHNS, High Speed, Steed, Steel, Hot Die Steel, 16MNCR-5, 20MNCR-5, SAE-8620 of ASTM A-335 GR, P1,P9, P11,P12,O22,etc.ASTM A-387 GR.,515/516GR.,60,70 & IS 2062 etc.
NON-FERROUS METAL:: Copper, Brass, Aluminum, Phosper-Bronze, Monel. Nickel, Inconel, Lead, Zinc, Hastelloy B & C, Titanium, Cupro-Nickel, Gun-Metal etc.. in the form of Rounds, Plates, Sheets, Wires, Circles, flats & Tubes.
MANUFATURING :: Manufacturing of all types of Pipe Fittings and Nut Bolt, Round Machinery,
All Types of Industrial Estate Raw materials etc.
Metal Building Materials Galvanized Steel Bar Grating Walkway Price For Construction
Steel grating Xingbei is racking related product. So it is widely used as flooring on mezzanine and steel platform, and as shelving on racking. For its perforated surface, it can meet fire-resistant requirement in many countries. The flat steel and the twisted square steel are distributed at certain intervals. The computer-controlled high-voltage resistance welding presses the twisted square steel into the flat steel to obtain a firm welding joint. The board surface is flat and contains steel grating with extremely high strength.
Parameter | Data | ||
Bear Bar Type | Flat Bar, I-Bar, Serrated Bar, etc | ||
Bearing Bar Size | 20x5mm, 30x3mm, 30x5mm, 40x3mm, 40x5mm, 50x5mm, etc | ||
Bearing Bar Spacing | 30mm, 33mm, 40mm, 50mm or other size | ||
Cross Bar Type | Twisted steel bar, Flat bar | ||
Cross Bar Size | 6mm, 8mm or other | ||
Cross Bar Spacing | 50mm or 100mm | ||
Weld Way | Welded , Pressure-locked, Swage Locked | ||
Material Grade | Mild Steel(Q235B), Stainless Steel 304 or 316, etc | ||
Surface treatment | Hot dipped Galvanized, Spray paint or other | ||
Standards | Steel Grating Standard | Steel Material Standard | HDG Coating Standard |
China | YB/T4001-2007 | GB700-88 | GB/T13912-92 |
USA | ANSI/NAAMM(MBG531-88) | ASTM-A36 | ASTM-A123 |
UK | BS4592-1987 | BS4360(43A) | BS729 |
Australia | ASl 657-1992 | AS3679 | ASl650 |
https://www.xbsteelgrating.com/steel-grating/metal-building-materials-galvanized.html
Steel gratings are widely used in platforms, walkways, trench covers, manhole covers, stair steps, stair platforms, and fences in the fields of petrochemical, electric power, tap water, sewage treatment, port wharf, building decoration, shipbuilding, municipal engineering, environmental sanitation engineering, etc.
PRODUCT FEATURES
Steel grating is made by welding with flat steel and bars with certain distances.other pIt goes through cutting, opening, edging and other processes. The products enjoy the features of high strength, light structure, high bearing, convenience for loading and roperties.The hot dipped galvanized coating gives the product excellent anti-corrosion resistance.
Founded in 1985, China Base Ningbo Group transformed into a comprehensive trading enterprise engaged in import & export, trade logistics, and automobile sales & service.
Over the past three decades, the company has actively pursued “internationalizing markets, developing trade, diversifying business, and fostering developments”, which has achieved tremendous success and generated significant growth. Ningbo China-Base Group is one of China’s Top 500 Companies, China’s Top 100 Trading Enterprises, and China’s Top 10 Private Trading Enterprises.
Ningbo China-Base Group has more than 30 wholly owned subsidiary companies engaged in international trade, international freight, bonded warehousing, international tendering, automotive sales & repair, and sales of aftermarket car parts. The group has trading transactions with companies of over 110 countries globally.
The group’s imports include iron ores, asphalt, plastics, liquid chemicals, coal, copper, and cotton. Its exports include steel, textile, garment, hardware machinery, and automobile accessories. China-Base imports over 15 million tons of iron ore annually and is one of five largest enterprises importing iron ore in China.
Ningbo China-Base Group has engaged in automotive 4S dealerships since 2002 and became one of the leading dealerships in Ningbo. After 10 years of development, Ningbo China-Base Automotive operates 10 4S dealerships for luxury brands including Audi, Mercedes-Benz, Volkswagen, Buick, Toyota, and Honda. Ningbo China-Base Auto is the one of the most recognized car dealerships and one of the largest automotive group operating in the Ningbo area. China-Base has been ranked as one of the Top 50 auto dealerships in China since 2010.
There is a well known company in the wealthyJiangsuProvince- DongTai QB Stainless Steel Co..Ltd. TheProduces of QB is famous in standard Stainless Steel manufacturing industry.
The company locates in Qindong Town Dongtai city which is famous for zhe product of zhe Stainless SteelStand Unit and Component.QindongTownis a most potential developed place in zhe Chang Jiang EconomicRegion, which is richly endowed by nature condition and convenient transportation. The company is a sparklingPearl in the town and is built on the foundation of QB Fasteners Factory, Dongtai. It is a private EnterpriseCombined with product Researching, Developing, Producing and Distributing. The Product includes StainlessSteel Null, Screw, Thread Rod, Valve, Flange, Pipeline, Corrugated Pipe and Standard Unit. The CompanyOccupies an area of 780, 0*0 m2, in which the construction area is 316, 0*0 m2. The number of employeesIs more than 500, and the machine is over 200 sets. The company is successively awarded a lot, such as theWell known Trade Mark of Yancheng City, High Quality Product of Jiangsu. AAAA Unit BrandEnterprise, andNational High Quality Enterprise etc. January 2014 my company`s trademark TNE was identified as A Well-Known Trademark byChinatrab.
The factory processing line including the raw material purchasing, melting, hot-rolling, pressing and finishMachining. All of these processes are monitored and managed strictly according to the international StandardSystem. Along with modem production machining. The advanced physical & chemical inspection. And powerfulScientific research force, this gives a guarantee tu the products. The High-quality products & great after-saleService have won the clients favor.The products sale well in the mainland and 75% of the markets are in many foreign countries such asJapan,Europe, USA, South Korea, Singapore, Malaysia, Australia, UAE(The United Arab Emirates) and other 20Different countries. In order to meet the needs of the customers with the high quality production. We haveScientific test and reasonable management & inspection according to the advanced international level. Our& component which according to the drawing. The main material are made by ourselves. Purchased formDomestic big steel company or imported from foreign company. Material grade are 1CR18NI9TI OCR18NI19OCR18NI10 0CR18NI12MO 02TI 00CR17NI14MO2 OCR25NI20 1CR13 2CR13 3CR13 imported ultra hightemperature steel, ultra cryogenic steel and ordinary stainless steel, grades are: 302 304304L321 316316L374 BB BBM BBC660A660B 2205 2507347 F53 32750 32760 32550 925 S31803 C27617-4925 C-276 625 316S31 316LN 316TI 17-4PH 410 420 42CRMO 35CRMOA 40CR ETC.
From designing, manufacturing and shipping process, each product is in strictly control under the belief“Quality is the life of the company”.With the advanced physical and chemical inspection, we can control thehigh quality and 100% pass rate. The enterprise passed international Quality Certificate such as ISO9001-2000, ISO18000, ISO 14000, OHSAS18001; and special equipment manufacture citification etc. July 21 st2012,QB has passed Military Certification from The General Armament Department of People’s LiberationArmy. November 2013, QB has approved by Material and Equipment Company of Sinopec Group. In April2011, QB also obtained the network qualifications of china Sea Oil Procurement Business System. And we certified ABS and CCS and API&LR Certs, also we acquired an approval of K.S. All of theseHave provided the foundation for the high quality of the Stainless Steel products.