Sumer Metal Industries is a notable Supplier of Stainless Steel Flat Bars in Mumbai, India. We are also known as one the Top Distributors and Stockist of SS and MS Flat Bars.
SMI / SMIPL
Offering a reliable way to connect pipe systems with the various equipment, valves, and other components of virtually any processing system, flanges are the second most used joining method after welding. Using flanges adds flexibility when maintaining piping systems by allowing for easier disassembly and improved access to system components.
A typical flanged connection is comprised of three parts: Pipe Flanges, Gasket and Bolting
In most cases, there are specific gasket and bolting materials made from the same, or approved materials as the piping components you wish to connect. Stainless Steel flanges are some of the most common. However, flanges are available in a wide range of materials so matching them with your needs is essential. Other common flange materials include Monel, Inconel, Chrome Moly, and many others depending on the application. The best option for your needs will depend on both the system in which you intend to use the flange and your specific requirements.
Flanges are not a one-type-fits-all sort of solution. Sizing aside, matching the ideal flange design to your piping system and intended usage will help to ensure reliable operation, a long service life, and optimal pricing. Here’s a look at the most common flange types available.
THREADED FLANGES
Also known as a screwed flange, this style has a thread inside the flange bore which fits with the matching male thread on the pipe or fitting. The threaded connection means you can avoid welding in many use cases. Simply match the threading to the pipes you wish to connect.
SOCKET-WELD FLANGES
Ideal for smaller pipe diameters in low-temperature and low-pressure scenarios, socket-weld flanges feature a connection in which you place the pipe into the flange and then secure the connection with a single multi-pass fillet weld. This makes this style simpler to install than other welded flange types while avoiding the limitations associated with threaded ends.
Slip-on flanges are very common and are available in a large range of sizes to accommodate systems with higher flow rates and throughput. Simply match the flange to the outer diameter of the pipe you intend to connect. Installation is slightly more technical as you’ll need fillet weld both sides to secure the flange to the pipe.
LAP JOINT FLANGES
Featuring a two-piece design, lap joint flanges require butt welding of the stub end to the pipe or fitting with the use of a backing flange to create the flanged connection. This design makes this style popular for use in systems with limited physical space or systems which require frequent dismantling and maintenance.
Like lap joint flanges, weld neck flanges require butt welding for installation. However, their integrity, performance in systems with multiple repeat bends, and the ability to use them in high-pressure and high-temperature systems make them a leading choice for process piping.
Used for terminating or isolating piping systems, blind flanges are essentially boltable blank discs. When installed properly and combined with the correct gaskets, they can achieve an outstanding seal which is easy to remove when needed.
SPECIALTY FLANGES
The flange types listed above are the most common. However, there is a range of additional specialized flange types available to suit a range of uses and environments. Other options include nipoflanges, weldoflanges, expanding flanges, orifice, long weld neck, forged flange, big size flange, high pressure flange and reducing flanges.
Valbruna Stainless Steel is a privately owned company which produces over 170,000 tons of high quality special steel, maintaining the original business strategy of serving niche markets with high quality products and providing customers with top notch services and dedication. The Valbruna Stainless Steel production is focused mostly on stainless steel and special alloys today, with a dedication towards satisfying even the most sophisticated demands of the market and constantly keeping their production techniques and “know How” up to date.
Valbruna has over 50 years of experience with laminated and forged bars and the production line is constantly growing and evolving. Production is currently conducted in two factories, one in Vicenza and the other in Bolzano.
The Company was incorporated as a Private Limited Company in 18th December, 1990 having its registered office in the state of Andhra Pradesh under name & style of ‘’Aditya lspat Private Limited” by registrar of the Companies , Andhra Pradesh. The Company was subsequently converted into a Public Limited Company with a fresh certificate of incorporation issued on 15th May 1992.
Steel is considered to be the backbone of human civilization. By virtue of its abundance, low cost and wide application capability, steel is termed as the people’s metal. Consumption of steel is crucial for the development of an economy.
Beekay Group took up this challenge 30 years ago and has blossomed into one of the most reputable groups of engineering industries in India, making steel and a wide range of rolled products, bright bars, laminated spring and coil springs with its manufacturing activities spread over Kolkata, Jamshedpur, Chennai and Vishakapatnam. The Group has achieved an annual turnover of Rs. 450 crores (fy-2004-2005) which is on a steady rise.
Albrecht Zwick GmbH is an independently owned German family company with over eighty years’ expertise, fifty of these in stainless steel.
As wholesaler and producer of stainless steel products we offer an extensive range of sheets, tubes and bars for construction and decoration.
Our stock of approx. 8.000 t ensures a good and quick delivery availability at competitive prices to our customers.
If you do not yet know us, let yourself be convinced and request a quote from our sales team.
Ambhe Ferro Metal Processors Private Limited is a trusted name in the steel industry in the manufacturing and trading field for the past 27 years. We are engaged in the manufacture, import, export and trading of steel. We cater to major companies in the Engineering, Construction, Capital Goods and other sectors. We have a rich experience in manufacturing, marketing, trading, providing technical services, etc. in the long steel products category where we have developed lots of expertise. Our clients value our Integrity, Customer Focus, Quality of Products and Excellence of Service. We believe in long term relationship with our clients.
We manufacture products such as Steel Rounds, Squares, Hexagons, RCS and Cold Drawn Bright Bars of various grades such as Mild Steel, Carbon Steel, Alloy Steel, Stainless Steels and other grades.
Sine our establishment in the year 1995, we, Anant Steel Private Limited, are an ISO certified manufacturer and exporter of TMT Bars & Cast Iron Product. Our offered range consists of Steel Bars,TMT 500D Bars, Industrial Ingots, Steel Slabs, Cast Iron Product, Nickel Bars, Nickel Alloy Round Bars and many more. These products are manufactured using qualitative raw material for ensuring their high efficiency, resistance to corrosion,high tensile strength, performance and long lasting features. Owing to all these attributes of our products, these are used in various industrial applications and construction companies for big construction projects such as dams, bridges and sky scrappers.
Leading Manufacturer of steel bars and have completed over 3 decades of existence in Stainless Steel, Alloy Steel, MS and Carbon steel industry having a turnover of Rs.200 cores. Our Steel manufacturing unit is situated at Kadi (Gujarat), near Ahmedabad.
Company has in-house facilities like rolling, annealing, straightening and facility for bright bar (Draw, Pilling, Centralized grinding) production. This is also supported by our lab facilities like Spectrometer, MPI, Hardness testing, UTS etc.
C&R Metals was established in 1965 with the idea of quality products and even higher quality customer service. At C&R Metals you will find highly trained and experienced employees at your service.
With metals of the best quality to fulfill your needs, a full fabrication shop to facilitate your industrial and artistic projects and the pin point accuracy of WaterJet cutting, the sky is the limit at C&R Metals. Come see us today to experience the difference of quality products and service. No job is too small.
“The idea that the customers needs come above all and there is no substitute for quality is what C&R Metals was founded on.” – Chip Hansen
Products & Services
Abrasive Tools (Grinding and Cutting Wheels)
Fabrication Services
WaterJet Metal Cutting
Welding Services
Welding Supplies
Mill Test Reports Available on Most Items
Metal Sales
Aluminum
Stainless Steel
Brass
Copper
Iron
Cold Roll
Machine Tubing
I Beams
Shafting, Sheet
Pipe up to 30′
Canara Steel Industries is one of the leading companies that is engaged in manufacturing, supplying, exporting and importing the premium quality Non Ferrous Metal Products and Steel Products. Our wide range of Industrial Products is fabricated in compliance with international quality standards. We procure the high quality Metal and Steel from the trusted vendors who lead the market by supplying corrosion resistant products. Our products are precisely engineered under the guidance of experts to ensure the high performance of products with accurate dimension. Last but not the least, we provide customized products to our clients at the most affordable prices.
CHASE BRIGHT STEEL LTD, is an ISO 9001:2008 certified manufacturer of cold finished bright steel bars for the domestic and international markets. The Company has been established for over five decades and has a modern and sophisticated manufacturing infrastructure to produce cold drawn, centreless turned and centreless ground steel bars.
The company is equipped with a range of machines and advanced processing facilities that give tremendous flexibility to meet the needs of demanding customers. The company is committed to satisfying customers varied and demanding requirements for consistently high quality cold drawn, turned and ground bright bars. The company is a leading Indian producer of bright bars and maintains a quality record that meets world standards. It produces many popular grades of finished steel to national and international specifications
CRM Group has been the pioneer in the Steel Re-rolling Industry incepting since 1948 over many decades. The group under the dynamic leadership of Sri Prem Gupta has been growing aggressively over time with massive future diversification and expansion plans. Based in Kolkata, India it is the leading manufacturer of structural steel products marketed under the brand name “CRM”.
CRM products include an array of structural steel sections with many intricate, tailor made profiles as per consumer demands. The marketing team is very active and the companies under the group are ISO 9000:2001 approved with ISI affiliation. The products strictly adhere to BIS (Bureau of Indian Standards) or any other standards as per demand. The group is highly quality conscious and the list of registrations with quality standards only talks about their awareness. The companies are RDSO (Indian Railways) Approved, Power Grid Approved Vendors, DGS&D (RC) Suppliers, Ministry Of Defense, ISI Aprroved and many other agencies. The manufacturing facilities are equipped with state of the art in-house testing facilities which are capable of deep chemical and physical analysis of the materials they process.
Dizdar Iron & Steel & Metal, Inc. was established in 2004.
Alloy Tool Steels (Hot-work Tool Steels, Cold Work Tool Steels, Plastic Mould Steels, High Speed Steels)
Carbon Steels (Steels Breeding, Cementation (Cement), Steels, Free Cutting Steels)
Sheet Metal Trade.
Company has been supplying raw material of steel for Automotive Industry, Construction, Petrochemical, Elevator Manufacture, Chain and Forging Industries, Alloy Manufacturing, Defense Industry and Agriculture Sectors since 2004.
Customer satisfaction, Mutual trust and Business Ethics are always our primary goals.
Since 1976 Ecor represents an important point of reference for thousands of workers in the distribution of products in stainless steel . The company has always focused on customer satisfaction through timely service and quality . The strengths, through which we can achieve this, consist of: • a full range of stainless steel items in stock • a highly trained team of sales engineers are able to meet the most varied demands of the customer • a modern automated warehouse and cutting-edge high-tech • a local distribution network and managed primarily with equity .
This Company belongs to FACOR Group owned by Saraf Family. Ferro Alloys Corporation Ltd (FACOR) was established in the year 1956 for production of ferromanganese at Garividi Andhra Pradesh and diversified to production of ferro chrome and charge chrome at Randia Orissa.
As a major step towards forward integration, FACOR took over the mini-steel plant located at Nagpur in the year 1978 for manufacture of Carbon, Alloy, Stainless and other special steels as FACOR Steel Division. Thereafter, through innovative and sophisticated technological developments, has been able to develop and manufacture critical grades of alloy and stainless steel to meet stringent requirements of customers both in India and abroad. It is now a leading alloy steel producer in the country and has been successful in exporting special stainless steel products all over the world with a focus on developed countries, apart from catering to critical requirements of Automobile, Railways, Defence, Chemical, Heavy Machinery and Engineering sectors in the domestic market. The erstwhile FACOR (Steel Division) is now an independent company known as FACOR STEELS LIMITED, part of FACOR Group of Companies..
Founded in 1996 by Maurizio Gentilini and Federica Guerzoni, Giò Steel immediately distinguished itself as a company destined to expand quickly. The professional experience of the two founders coupled with the knowledge and know-how gained in the sector made Giò Steel, right from the very beginning, a very innovative and cutting-edge company, starting initially by selling special types of cold-worked steel.
Ever since its foray into the steel trade in 1978, Gopal Group has established itself as name to reckon with, in the steel industry. Over the years, through meticulous quality control and outstanding customer care, it has built a reputation for quality, reliability and integrity.
What started off as a small steel plant with a capacity of 2400 MT/year, Gopal Group has now grown into an organization with manufacturing facilities at multiple locations with a combined production capacity of 120,000 MT/year. Strong values of a family run enterprise backed by an assembly of industry’s most talented professionals has given the group its current form & stature.
Guiwan Metals is the earliest Guangxi metals enterprise which specializes in procurement and supply chain management of special steel products. We dedicate to promote the cooperation between China and ASEAN companies in global special steel trade and investment field. Guiwan Metals strive to be an important organization of new metal material research and evaluation in the China-Asean Free Trade Area.
Products Range
Guiwan Metals products cover the range of round bar, hexagonal bar, hollow bar, tube/pipe, square bar, flat bar, plate, block, steel profile, steel forgings (cylinder, disc, ring, shaft, and flange), etc.
Serving Industry
Guiwan Metals products serve the industries of mould-making, machinery manufacturing, automobile manufacturing, petroleum and gas, equipment manufacturing, power plants, ship building, chemicals, aerospace, appliances manufacturing, etc.
Market Network
With the professional skills, Guiwan Metals expand the market from Southeast Asia to the Americas, the Middle East, Europe, North America, Oceania and other major economic areas.
Team
The management team of Guiwan Metals comes from various fields of professionals, including enterprise management, logistics management, material research, iron and steel production, steel processing, metal inspection, international trade, financial investment, etc., they are the experts in the field of management and operation.