Panchmahal Steel Ltd. produces Stainless Steel long products. The company’s product offerings include range of Stainless Steel grades, in hot rolled wire rod & bars and cold finished bars & wires. Panchmahal Steel offers Stainless Steel in Austenitic, Martensitic, Ferritic, Precipitation Hardening, Duplex and low nickel – high manganese (200 series) grades. Incorporated in 1972, the company is based in Gujarat.
Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
IBC GROUP is dedicated to transforming various metal materials all over the world, through the process of coils, steel sheet, steel pipe, wire, profile,Alloy steel, all variety of metal products to the construction and wide manufacture industry. Meanwhile, because maintain long term friendly business relationship with clients. Enjoy solid trust from our regular clients, already working one-stopstation service in other construction related products Such as metal process equipment .All Enjoy highly comments from our customers.Look forward the chance to develop together.
Beijing Shenghe Zhongtai Stainless Steel Co.,Ltd was established in 2009 and located in Beijing, China. In the past 9 years, we have focused the Stainless steel material and surface finish. We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year. Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co.,Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
We have imported the advanced cutting equipment to do the coil cutting and flatting. And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.etc. Especially only we could do the surface treatment for the with more than 1500mm.
And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing. Our annual outputs has exceeded 3000 mts. We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.
SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.
For more, please click here to customize your stainless steel furniture decoration.
Who We Are
Ares Engineering is the expert in the manufacturing metal decorative wire mesh for architectural application. With the most advanced facility, we have the most modern and productive mill in China. Our products―whether they’re expanded metal mesh, laser cut sheet, perforated sheet or stainless steel decorative wire mesh―seamlessly blend form and function, challenging the status-quo. Through consistent growth and innovation we strive for the highest quality products at an unbeatable value.
As a major manufacturer and supplier of metal mesh products, we are committed to quality. Our investment in personnel and equipment provides you–customers with innovative and value-based products that meet or exceed your design expectations. From concept to completion, our team of experts and 35 years of experience in metal products can help you choose the mesh that suits your needs.
Our People
At Ares engineering, we are extremely proud of our employees and our commitment to them. Everyone is full of enthusiasm, diligence, dedication, and always strive to pursue the highest quality craftsmanship. They are the heart of our company and the reason why we are able to provide you with high-quality metal mesh products.
We have professional sales staff, engineers, designer, mesh worker, painting technical worker, quality inspector, customer service representatives, and all of the creative, inventive individuals here at Ares that continue to push the boundaries of what metal mesh can be.
With a professional team of product advisors, we are able to guide you in product selection. If your product requires design and technical support, we can provide suitable suggestions, alternatively we can provide price information, availability and lead times.
Company Profile
Ares engineering has been the leading manufacturer of metal mesh products. We are well respected in the industry for being trustworthy in quality and service.
Ares was built as DBL Expanded Metal Mesh Factory in 1986, which only produce the expanded metal mesh at first. With time goes by, our founder introduced many advanced equipment and enlarge our production range, including not only stretched mesh machines, but also punching machines, laser cutting machines, cutting machines, and decorative wire mesh machines. Then we renamed the company name as Anping County Huijin Wire Mesh Co., Ltd on 2008. Next year, we started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology.
With the continuous increase of decorative mesh projects, we invested the international-standard PVDF and Powder Coating Painting line, which can control quality well.
On 2019, we set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. The main purpose of the branch establishment is separating projects from traditional businesses, assembling a dedicated project team which can provide solutions and professional service for metal decorative mesh projects.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
History
1986: Built DBL Expanded Metal Mesh Factory
2008: Renamed as Anping County Huijin Wire Mesh Co., Ltd
2009: Started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology
2012: Invested the international-standard PVDF and Powder Coating Painting line
2019 by now: Set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. Focus on providing solutions and supplying products for metal decorative mesh projects.
Our website:http://www.aresmaterial.com
1958-1990 Hebei XINYU Welding Co., Ltd.
1991-2004 DONGGANG Welding Materials Co.,Ltd, which was founded by Hebei University of Technology and Hongkong Community Service Center,mainly produces High antirust CO2 gas-shield welding wire, Submerged arc welding wire, Stainless steel welding wire & Flux-cored welding wire.
- Now Hebei XINYU Welding Co., Ltd, which mainly produces high strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire . Our products are widely applied to the welding of low-alloy high tensile large & key steel structures in coal machinery, construction machinery, petrochemical machinery, pressure vessels or tanks, oil & gas pipelines, military industry, shipbuilding, bridge and high-rise buildings etc. At the same time,we are the only interprise in the domestic which produces welding wire as well as welding wire equipment.
All our products have passed ISO 9001-2015 quality system certification and CE certification because of our advanced production lines, top professional testing equipment, intelligent R&D team and scientific management system. Meanwhile, we get 7 invention patents including a national one. We are a member of China Mechanical Engineering Association and China Welding Association. Other honors are ” Consumer Trusting Products in Hebei province” ” Famous Brand products in Hebei province” ” Good Credit Enterprise in Hebei Province” and “China Key &Leading Enterprise in high tensile steel welding wire”.
Our Welding wires and welding wire equipment are exported to USA, Italy, Brazil, Russia and India etc.
Welcome you to our factory any time.
Cefa Metal was established in 2011. Our company has a factory that has been operating in the domestic market for years mainly engaged in steel grating, iron wire, wirefence and other products. In 2018, we decided to build our export department in Shijiazhuang City, Hebei, China. We are committed to offering stable supply for customers with competitive price, reliable quality and complete solution for your business.
Anping County Anlida Metal Wire Mesh Co., Ltd. was founded in 2001 in July and was formally established company in 2006. Which is located in Anping County, Hengshui City, Hebei Province, next to the da guang express way. It is “the quality standard of qualified enterprises” Hebei ProvinceChina construction metal doors and Windows, curtain wall industry “innovative enterprise”, the national federation of industry and commerce hardware mechanical and electronic chamber of commerce building metal doors and Windows, curtain wall) committee “vice President of units, commodity wholesale market in the development of China market society committee” merchants nationwide credit management model “, “member of” China hardware products association.
Our products:Expanded Metal Mesh,Aluminum Metal Mesh,Perforated Metal Sheet,Grating,Wire Mesh, etc.
The development direction of the company has a perfect IS09001 international quality management system, and has a group of senior team full of enthusiasm, including experienced, technical comprehensive, excellently engineer, technician team. They constitute the company’s a strong backing.
The company has also quality control in production process and a full range of testing test equipment, which makes that the quality of products can be guaranteed for a long time .We sincerely thank the customers who have given us support and love over the years. We hope to get your continued support, as always, we will provide you with the best quality products and services.
Established in 2007, Zhejiang Flexible Technology Co., Ltd. has developed into a leading manufacturer in the flexible conduit market. From day one, we have always been deeply committed to manufacturing, designing and marketing multiple types of metallic and non-metallic conduits, conduit fittings, fiber optic cables, and fiber optic patch cords. With nearly eight years of experience behind us, we have become one of the most prominent suppliers on the market. We are one of China’s most respected conduit solution providers, offering the broadest range of products in our field for even the most demanding market.
We specialize in producing flexible conduits, which can be divided into multiple categories, according to structure, material, performance and application. Our conduits can be made from galvanized steel, be square locked and interlocked flexible metal conduits, cable conduits and shower hoses, just to name a few. With a wide assortment of fittings and accessories, they are widely used in building cable systems, machinery, petrochemical and metallurgical facilities, and other industries that require wire and cable protection. Our flexible tubing can also serve as a liquid or gas transmission medium.
Our company has also placed a strong significance to the introduction and application of world class technology and production equipment, as well as the reinforcement of the production process control, in order to provide high quality conduits, conduit fittings and armored fiber optic cables to meet a demanding market. We have also proudly provided a number of new production and test equipment for fiber optic cables and patch cords. We have also obtained certificates such as the ISO9001:2008, UL,CE, TUV and more. Our company strives to offer the highest quality products, superior services and new technologies for our flexible conduit products.
More information please click:http://www.conduit-flexible.com
Steel grating is generally made of carbon steel, and the surface is hot-dip galvanized, which can prevent oxidation. It can also be made of stainless steel, and the steel grating has the properties of ventilation, lighting, heat dissipation, anti-skid, explosion-proof and so on.
Steel grating is a kind of steel product with square lattice in the middle, which is cross-arranged with flat steel according to a certain spacing and horizontal bars, and welded by pressure welding machine or manually. Steel grating is mainly used as gutter cover. , steel structure platform plate, steel ladder step plate, etc., the cross bar is generally made of twisted square steel.
Advantages of steel grating fence
Material saving: the most material saving method under the same load conditions, correspondingly, the material of the supporting structure can be reduced;
Reduce investment: save material, save labor, save construction period, free of cleaning and maintenance;
Simple construction: on the pre-installed support, it is fixed with bolts or welding, and it can be completed by one person;
Save construction period: the product does not need to be reprocessed on site, and the installation is very fast;
Durable: It has been hot-dip galvanized anti-corrosion treatment before leaving the factory, and has strong impact and heavy pressure resistance;
Modern style: beautiful appearance, standardized design, ventilation and light transmission, giving people an overall smooth modern feeling;
Lightweight structure: less material, light structure, and easy to hoist;
Reduce wind resistance: due to good ventilation, the wind resistance is small in case of strong wind, reducing wind damage;
Anti-contamination: no rain, snow and dust;
Other advantages: ventilation, lighting, heat dissipation, explosion-proof, good anti-skid performance;
Simple design: no need for small support beams, simple structure and simplified design
Acid and alkali corrosion ability: in the range of PH 6 to PH 12.5, a stable protective film is formed on the surface of the zinc layer, and the corrosion resistance is good.
Steel grating use
Steel grating is suitable for alloys, building materials, power stations, boilers, shipbuilding, petrochemical, chemical and general industrial plants, municipal construction and other industries. It has the advantages of ventilation and light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy to clean and easy to install.
Steel grating has been widely used in all walks of life at home and abroad, mainly used as industrial platforms, ladder treads, handrails, passage floors, railway bridge sideways, high-altitude tower platforms, drain covers, well covers, road grilles, three-dimensional It can also be used as a fence for parking lots, institutions, schools, factories, enterprises, sports fields, and garden villas.
A well screen is a filter device used as the suction portion of a well constructed in a loose or semi-consolidated aquifer. The screen allows water to enter the well from the saturated aquifer, prevents sediment from entering the well, and acts structurally as a support for the aquifer material. When considering well efficiency and the logarithmic cost to the well owner, the importance of having the right screen cannot be overemphasized.
The sieve is resistant to corrosion because it comes into contact with water. In addition, it has high strength and can keep the surrounding structure intact. The openings of the sieve can be small enough to block the large amount of formation around them. The flow of water through the screen will be uniform.
Well screens are recommended for all environmental drilling operations. It helps extend the life of the well and keeps the flow of water unrestricted. Sand and fine powder sand, these fine particles can be filtered out before there is water. Well screens help remove most of this fine material from well water.
Well screens are made from a variety of materials, ranging from rough-hewed hand designs to machine built high-efficiency and long-life models. The value of the screen depends on how much it contributes to the success of the well.
Standard:
- Large open Spaces
- Do not block the slot
- 3.corrosion resistance
- Sufficient column and collapse strength
Functions:
- Easy to develop
- Minimal scaling tendency
- Low head loss through the screen
- Control sand pumping of all types of aquifers
Slot size selection is a critical step to ensure maximum well performance. The screen is usually designed to block 50% of the stratum, and the entry speed for the screen should not exceed 1/10 or 0.1 ft per second. The velocity is calculated by dividing the well production in GPM by the screen open area in square inches.
The gap size of the screen is based on dimensional analysis of the formation sample. After analyzing the composition size of grain in the sample, grain size distribution curve
I can draw it. Several methods can be used to obtain the allocation of information about grain size. The most widely used method is to pass the material through a stacked set of brass or stainless steel sieves. During the screening process, each sieve removes a certain percentage of the whole sample; The best materials are collected in the chassis. Screening analysis not only provides the basis for determining slot sizes, but also other factors that influence screening well design.
Hebei Yeyuan Construction Engineering Co., Ltd. is a professional import and export company，
Our company mainly sells wire mesh and fence products. Wire mesh products include stainless steel wire mesh, copper wire mesh, welded wire mesh, gabion basket, hexagonal wire mesh,layer chicken cages, expanded metal mesh, window screen, black woven wire mesh, steel grating ,concertina wire, Barbed wire, etc. The fence products including anti clamp fence,chain link fence,defensive barrier,palisade fence,airport fence,spike fence,roll top fence,double wire fence,temporary fence,crowd barrier,wire mesh panel etc.
The company has independent import and export management rights and a complete customs clearance system such as China’s electronic port to ensure the smooth flow of domestic and foreign distribution! Ensure that customers who urgently need to transfer goods from abroad get the goods in the shortest time.
Facing foreign countries, our company’s products are mainly sold to South Korea, Japan, Chile, Argentina, Brazil, the United States, Turkey, the Philippines, Australia, India and many other countries and regions. Over the years, our company has won the trust and favor of our customers with high-quality products, first-class service,so that our wire mesh and fence products are spread all over the country and overseas! Thanks to the support of new and old customers, Yeyuan Company will work harder and enterprising, and give back to customers with better and more efficient services!
We have an experienced technical consulting agency,in order for you to make the right choice of wire mesh and fence, we have established a marketing team with first-class efficiency and first-class service!
Strong technical force, high quality and first-class marketing and after-sales service are your best choice!
——————Welcome to choose Hebei Yeyuan Construction Engineering Co., Ltd
Expanded metal, also known as metal mesh, refers to any type of metal raw material that can expand in response to different climate changes. This expansion capability makes it ideal for many functions, and it also helps reduce wear on components made with this metal structure. Expanded metal can be used to make many different types of objects, including metal grinders, wall art, furniture and other objects, where the ability to cope with climate change helps protect the integrity of the finished product.
One of the most common examples of such metal products is expanded metal sheets. These sheets can be scored and peeled to create perforation designs, which can then be used to create many different metal products. This method can be used to create mesh designs and is often found in outdoor furniture made entirely or partially of metal parts. The same technique can also be used to create large panels for use as wall art, room dividers, and metal products with similar functionality and decoration. Although expanded metal can expand and contract when exposed to different weather conditions, it is very durable and very suitable for use in many different products.
Expanded metals can also be used to increase the strength of many construction projects. By including metal sheets or even metal strips in the masonry work, it can help maintain the integrity of the masonry over a long period of time. The same method can be used to provide additional strength to plaster and other types of concrete structures. When used to create perforated or diamond-shaped grids, expanded metal can be effectively used to create cages or other enclosures, ideal for everything from animal kennel spaces to storage areas for holding various supplies. One of the advantages of constructing these types of enclosures with expanded metal is that it allows air to circulate freely and improves visibility.
Today, many other applications for metal expansion are also adopted. This includes creating expanded metal fencing that are both decorative and durable. The metal can be used to make grills suitable for outdoor use and various forms of indoor cooking equipment. Many companies use expanded metal to create a variety of products that can be used by individual consumers and business operations, making this metal one of the most widely used material categories today.
Steel grating fence, also known as welded steel grating fence, is the most durable metal grating product. They are made of mild steel. We provide complete solutions for steel grille, pressure lock grille, heavy-duty grille, steel stair treads, wooden board grille, safety grille, trench cover, etc. All gratings are very rugged and suitable for all bearing applications. And all lenticular products are completely recyclable.
Steel grating fence is made by welding with flat steel and bars with certain distances. It goes through cutting, opening, edging and other processes. The products enjoy the feature of high strength, light structure, high bearing, convenience for loading and other properties. The hot dipped zinc coating gives the product excellent anti-corrosion.
The Grating Fence can be customized according to the unique design of a specific building project, and can contain characteristic columns. The integrity of the fused grating material allows it to be cut to Grating Fence of individual shapes, such as bows or wavy tops.
Material specifications
Material: high quality low carbon steel, stainless steel 304 or 316.
Types: plain bar as standard.
Finishes: electric galvanized, hot dipped galvanized, powder coated, according to the difference surface treatment.
PRODUCT DETAILS
Barbed wire can be widely used as accessories for woven wire fences to form a fencing system or security system. It is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing.
Barbed wire is a protective net formed by mechanically winding barbed wire around the main wire through various weaving techniques.
Anti-corrosion, anti-aging, high durable. Barbed wire can be used with chain link or other fencing barriers for added security. It can discourage unauthorized entry and is suited to a variety of containment needs.
Mainly serves in isolation and protection of grassland, boundary, railway, highway,prisons, private residence, bank, bill printing factory, and also widely used in military base, industry, agriculture, animal husbandry, plantation for fencing.
Hebei Ekro Import And Export Trading Co. Ltd. is located in Shijiazhuang city, Hebei Province,has its own factory named DingZhou Yikang Metal Products Co.ltd which is founded in 1995. It’s located in LiuSu Industrial Zone, DingZhou City, HeBei Province and covers 6000 square metres.
We mainly specialize in the production and exporting of all kinds of wire mesh including hexagonal mesh, welded mesh, chain link fence, PVC coated mesh and all kinds of wires like galvanized wire, PVC coated wire, black wire, razor wire, barbed wire etc.
We have the whole facility of mesh production line, PVC coating line, zinc coating line, wire drawing line and packing line.
Annual production capacity is 1000 containers and turnover is upto 100,000,000 RMB last year. Our company also have the direct import & export rights.
Hebei Ekro(YiKang metal) has always adhered to “quality first” over the years. Credibility and good service are our business philosophy. We always commit to providing you with high-quality products and quality services. Having a professional, dedicated design management team, production team and quality control team, we control every aspect and process rigorously .
Over the past few years of production, management and development, Hebei Ekro(YiKang metal) set up its own quality management system. Passed the ISO9001: 2000 quality system certification & SGS management system and get the pollutant discharging license. Hebei Ekro(YiKang metal) always implement the concept of customer value comes first, tailor-made products to meet the needs of different customers, and continuously provide customers with solutions and technical problems.
Over 20 years development, we have a batch of long -term business partners over 30 countries all over the world, such as in Europe, North America, South America, Middle East, Africa, Southeast Asia etc.
Warmly welcome to visit us, your forever friend and best partner!
Black annealed wire is also known as oil painted black iron wire or black mild steel wire, which is offered in the form of coil wire, tie wire or cut into straight wire.
| Name | Black annealed wire | Black annealed cut iron wire | Black annealed binding tie wire |
| Wire Guage | BWG8 ~ 26# | AWG8 ~ 26# | SWG8 ~ 26# |
| Wire Diameter | 4mm ~ 0.46mm | 4mm ~ 0.46mm | 4mm ~ 0.46mm |
| Material | Q195 or as needed | ||
| Coil weight | 10-100KGS | ||
| Tensile Strength | 30KGS/mm²— 55KGS/mm² | ||
Oiled Black Iron Wire Best® Packing Details:
(1) Wrapped with Pvc film inside, outside Hessian cloth or woven cloth.
(2) Other packing according customer’s requirement.
Black Annealed Iron Wire Advantages:
(1) Softness and pliability.
(2) Strong breaking strength.
(3) Coated with anticorrosive oil, hard to rust.
Black Annealed Iron Wire Application:
Black annealed iron wire is widely used as tie wire or baling wire in building, parks and daily binding.
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
The palisade fence is popular in British, Ireland. It could take you a safe life, also beautify your living spaces.
The use of post accessories and fittings can better help the mesh and post connection. And it is easy and safe.
MODERN TUBE INDUSTRIES LTD was established on July, 2006 with registered capital of 1 Crore, which has now increase to 25 Crore Its works is situated in Ramangamdi Village, Vadodara City(Gujarat), which is in the vicinity of the capital of Gujarat that is Gandhinagar, It enjoys beautiful environment and convenient transportation it is only 23 Kms from Sayaji Airport and 25 Kms from Vadodara Railway Station, 350 Kms from Mumbai..
We are an ISO 9001:2008 Certified Company engaged in manufacturing of Stainless Steel, Seamless/Welded, Tubes, U-tubes and Pipes. We are the regular suppliers to various industries Like Chemicals, Pharmaceuticals, Petrochemicals, Power, Dairy, Oil Processing units, Refineries, Synthetic Fiber, Sugar, Paper & Rayon, Fertilizers, Nuclear, Aerospace etc….
MODERN TUBE INDUSTRIES LTD. are poised to grow beyond Its extent and would stride towards the promising future.
Positive response to the advanced and diversified needs of customers.
Introduction of our unique new products to create additional demand for Stainless steel tubes/pipes.
Expansion of our overseas business in the pursuit of growth and development of MODERN group for the bright future.
We would recognize that it is equally important for us to accomplish the following actionable improvements on day-to-day assignments gradually and steadily.
Improvement in competition with reasonable cost effectiveness.
Achievement of a quality upgradation to satisfy customers.
Improvement in every employee’s work environment to accept the challenge; whereby to meet the target.
Vishwa Stainless Pvt Ltd. is fast emerging as a professionally managed manufacturer of stainless steel. Equipped with integrated manufacturing facilities and a credible reputation of delivering premium quality SS products, Vishwa Stainless Pvt. Ltd. has emerged to be one of the leading manufacturers of stainless steel products in India, which include:
• Bright Round Bars
• Hexagonal Bars
• Wires
• Black Bars
• Forged Bars
• Forged Round Bars
All these products come in various grades & specifications.
We have established ourselves in Ahmadabad, the capital of Gujarat and have substantial stock levels of all essential items within our scope of supply and are in a position to offer immediate deliveries. We are currently supplying SS goods to various countries including Australia, Europe, Germany, Italy, Poland, Spain, Netherlands, UAE (United Arab Emirates), Turkey, UK, USA, Canada, Saudi Arabia, etc and it is our endeavour to be the premier supplier of steels around the world. We are a service oriented group. With our focus on Superior Customer Service, Premium Quality and Quick Turnaround we are sure you will agree that Vishwa Stainless Pvt Ltd.is your best source for steel .The foundations of our business continues to be based on quality, reputation, customer service and performance. The highest emphasis is placed on human resources and deployment of the latest in information technology.
Our sound business principles and ethical practices have held us in good stead in our foray into the stainless steel industry. We request you to give us an opportunity to serve your esteemed organization by including us in your approved vendors list.
We UTTAM STEELS are a renowned stockist and supplier of a wide range of Stainless Steel Products. Our range is acclaimed for its various features such as resistance to temperature & abrasion, durability and ductility. The range complies with the set industry standards and caters to the needs of Various industries.
Our organization is backed by a rich vendor base, which helps us to provide quality products to our clients. These vendors are renowned manufacturers of the industry and are highly trustworthy. Owing to the quality products that we procure from our vendors, we have been able to win the trust and confidence of our clients. Our transparent business practices have won us a rich client base across the nation.
With the constant guidance of our mentor,we have carved a niche in this industry. His vast experience in this domain and immense expertise has allowed us to reach phenomenal heights.
Siddhchakra Steels Pvt Ltd has Diversified into a Multi-Product Group Deals in Steel Round Bars, Ship Shafts , Seamless Tubes and Pipes, Steel Plates, Sheets, Coils, Pipe Fittings and many more products in carbon steel , Alloy Steel & Stainless Steel materials in Wide Range of Sizes.
Our Strong Contacts with Leading Manufacturers in India and the World is the Cornerstone of Our Success and Rapid Growth in the Industry.
It is our Endeavor to Carry Forward the Tradition of Excellence providing consistent Superior Quality and Improved Products to our esteemed customers exceeding their Expectations.
We are one of the leading Manufacturers, Exporter & Suppliers of :
Mild Steel, Carbon Steel, Alloy steel – Round bars, Ship Shafts , Hot Rolled Round Bars, Forging Round Bars
Dia 50 mm to 1200 mm
Mild Steel / Carbon Steel / Stainless Steel – Seamless Pipe
OD 13.7 mm to 1200 mm
Steel Sheets , Plates & Coils
Steel Flanges & Pipe Fittings
Special Steel Material
Our company has moved forward with a relentless commitment to offer finest quality products at the most competitive price to ensure complete customer satisfaction. With years of experience, a team of dedicated personnel and willingness to succeed, the company is determined to meet with the never-ending demands of the customers.
We pride ourselves in our ability to respond quickly and flexibly to our customers’ needs and in efficiently managing the risks in Moving Steel around the world.
We have Access to one of the widest and deepest product mixes on the market. In Addition, we have Privileged Relationships with Major Steel Mills.
We VIVEK STEEL are proud to introduce ourselves as one of the established manufacturers, Stockholders & exporters of high quality round bars using high quality machines and instruments. These stainless steel round bars are available in various sizes. We are consistently bringing out innovation in our wide product range. Our superior quality products at competent prices enable us to sustain in the highly competitive market place.
We at VIVEK STEEL are committed towards three principles: Quality, Reliability and Trust that defines the growth path of industry. We strive for the delivery of quality and reliable products on time as per customer requirement at most competitive prices.