Overseas Aluminium is a dynamic group, which was established over a decade ago to cater to growing demands of Aluminium Products. We have a team of young visionaries who end eavour for excellence in every aspect related to our products. As importers, exporter, dealers & stockists with huge stocks Overseas Aluminium become within one of the most reliable source for quality within a short span. Our aim is to provide our buyers with everything in aluminium under one roof viz.
We are Manufacturer, Exporter & Supplier of Pipe, Tube, Fitting, Flange, Sheet, Plate, Rod, Valve, Fastener, Structural, Customised Parts, etc. in STAINLESS STEEL, CARBON STEEL, ALLOY STEEL, ALUMINUM, DUPLEX STEEL, NICKEL ALLOY, INCONEL, MONEL, HASTELLOY, COPPER, CUPRONICKEL, BRASS, TITANIUM, NIOBIUM, MOLYBDENUM, TUNGSTEN, ZIRCONIUM, TANTALUM, MAGNESIUM, OTHER FERROUS & NON-FERROUS ALLOYS
304 is a chromium-nickel austenitic stainless steel with incredible quality and astonishing utilization assurance as furnished in the reinforced condition with a normal brinell hardness of 175.Characterised by high disintegration insurance all around air damaging circumstances it indicates sublime security from most oxidizing pros, general foodstuffs, purifying courses of action, dyestuffs, most common chemicals, notwithstanding a wide collection of inorganic chemicals furthermore hot oil gases, steam start gases, nitric destructive and to a lesser degree sulphuric destructive.
We take immense pleasure in introducing ourselves as one of the leading Importer, Stockiest & Suppliers:
STAINLESS STEEL :: Seamless / ERW Pipes, Pipe-Fittings, Sheets, Perforated, Sheets, Plates, Circles & Ring, Rods, Wire, Wire-Mesh, Flats, Angles, Channels, SMP Rodes Eelectro etc. of Grades TP-304,304L,316,316L,321, 309, 310, 409, 410, 410S, 420, 430, 904, 904L etc..
S.S. & M.S. Fittings :: Seamless / ERW Stainless Steel Grade 202, 304, 304L, 309, 310 310S, 316, 316L, 321,
(B/W & S/W) 409 410 430 904 904L Elbow, Tee, Reducer, Long, Short, Stub end, Flanges, Nipples, Unions, Caps, Hex, Nipple, House Nipple, Coupling, Nut Bolts, Pipe Clamps, Dairy Fittings, Tricover, Clamp & Vales, and Industrial raw material etc.
ALLOY STEEL :: Seamless / ERW Pipes, Sheets, Plates, etc. of Grades EN-8, EN-9, EN24, EN-36,
EN-353, HCHCR – WPS, D2-D3, OHNS, High Speed, Steed, Steel, Hot Die Steel, 16MNCR-5, 20MNCR-5, SAE-8620 of ASTM A-335 GR, P1,P9, P11,P12,O22,etc.ASTM A-387 GR.,515/516GR.,60,70 & IS 2062 etc.
NON-FERROUS METAL:: Copper, Brass, Aluminum, Phosper-Bronze, Monel. Nickel, Inconel, Lead, Zinc, Hastelloy B & C, Titanium, Cupro-Nickel, Gun-Metal etc.. in the form of Rounds, Plates, Sheets, Wires, Circles, flats & Tubes.
MANUFATURING :: Manufacturing of all types of Pipe Fittings and Nut Bolt, Round Machinery,
All Types of Industrial Estate Raw materials etc.
Dhairya Alloys is a Leading Manufacturer, extensive Stockholder of Bars, Plate & piping products for the Oil, Gas, Petrochemical and Nuclear Industries. Dhairya Alloys is the Manufacturer of Butt-weld Fittings, Forged Fittings, Compression Fittings, Outlets, Flanges & Long Radius Bends in Materials like Stainless Steel, Monel, Inconel, Hastelloy, Titanium, Copper, Brass, Aluminium & Nickel Based Alloys. Alloy Steel, Duplex & Super Duplex Steel, Nickel Alloys etc. We also manufacture and supply non-standard items in any material to customer’s specifications
At Numax Steels, we are one of the leading supplier & manufacturer of Nickel Alloy, Copper Alloy, Stainless Steel, Duplex Steel, Alloys Steel, Carbon Steel including Inconel, Monel, Titanium & Brass products that includes Pipes & Pipe Fittings, Buttweld Fittings, Socket Weld Fittings, Ferrule Fittings, Tubes, Sheets, Plates, Coils, Bars, Flanges, & other products. Over these years of our inception, we have grown into a highly established brand and serve a long list of customers from domestic as well as international markets. Contact us today at +91 22 66394257 to request a free quote!
United Stainless LLP are one of the leading manufacturers, suppliers and exporters of stainless steel, carbon steel, alloy steel, duplex steel, super duplex steel, high nickel alloy, inconel, monel, hastelloy, alloy 20, titanium alloy pipes, tubes, sheets, plates, coils, round bars, rods, pipe fittings, flanges and forged fittings in India.
We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,
Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In The Industries Related To The
Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps & Petrochemicals,
Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.
Materials:
PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.
REGARDS
ARVIND JAIN – SALES HEAD
R-PIPE OVERSEAS
T: +91 22 6659 5201
M: +91 9930551137
Whatsapp: +91 9082065807
Skype: asj.rpipe
E: info@rpipeoverseas.com & rpipeoverseas@gmail.com
W: http://www.rpipeoverseas.com
A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,
PB Marg, Mumbai – 400008. (INDIA)
GST TIN NO.: 27ALTPJ6984G1ZB
RIMCO OVERSEAS is a Leading Manufacturer, extensive Stockholder of piping products for the Oil, Gas, Petrochemical and Nuclear Industries.RIMCO OVERSEAS is the Manufacturer of Butt-weld Fittings, Forged Fittings, Compression Fittings, Outlets, Flanges & Long Radius Bends in Materials like Stainless Steel, Carbon Steel, Alloy Steel, Duplex & Super Duplex Steel, Nickel Bolts Alloys etc. We also manufacture and supply non-standard items in any material to customer’s specifications.
Duplex Stainless Steel Plate belongs to a class of steel known as the duplex steel. We are expert in Duplex Steel Coil supplier that are in high demand in many applications ranging from food industry to the chemical industries etc. The additions and quantities of these materials provide the Stainless Steel Duplex Plate an extra ordinary corrosion resistance and tensile strength. Get a wide variety of ASTM A240 Duplex Sheet from our inventory. Best Stockholder of ASTM A240 Duplex Sheet in UAE or China.
美国联合钢铁工业有限公司(USI Group)是中国最大的钢管集团之一,成立于1989年,海外总部位于新加坡,国内总部位于中国江苏省苏州市苏州工业园区。
USI集团拥有20个分支公司,总资产:10亿美元,员工10000多人,以及6个工厂(分别位于天津,苏州和沧州市),用于生产电焊管(ERW,SSAW和LSAW),无缝碳钢管,镀锌焊接管,方形/矩形钢管,不锈钢管/盘管/板/片,管件,法兰等。
我们先进的设施以及在生产的各个阶段均具有出色的质量控制,可确保产品质量,因为由于我们优质的产品和出色的客户服务,我们赢得了客户的满意并在油气管道行业中享有良好的声誉,我们的客户包括PDVSA,NIOC,中石化,中石油等。
Aluminum ingot with high purity quality and low price
Aluminium Ingot
-Introduce: high purity aluminium ingot
Advantages
-Primary advantages
-Why should I buy?
China factory price aluminium ingot 99.7%
Hot sale Aluminum ingots purity 99.7% 99.85% 99.9% with good quality
-What makes this product different to ?
high purity
factory price
Hot sale
purity 99.7% 99.85% 99.9%
high purity aluminium ingot Main functions
-Key Features
Silver white light metal. It’s malleable. Products are often made into rod, sheet, foil, powder, ribbon and silk. A layer of oxide film can be formed to prevent metal corrosion in humid air. When heated in the air, aluminum powder can burn violently and emit dazzling white flame. It is easy to dissolve in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solution, but difficult to dissolve in water. The relative density is 2.70. Melting point 660 ℃. Boiling point 2327 ℃. Aluminum is the third most abundant metal element in the earth’s crust after oxygen and silicon. With the development of aviation, construction and automobile industries, the unique properties of aluminum and its alloys are required, which is greatly conducive to the production and application of this new metal aluminum. It is widely used.
https://www.co-nikel.com/product-aluminium-ingot.html
Used for industry such as automobile,pinning and weaving,electron broadly and so on
The use of a substance depends to a great extent on its nature. Aluminum has a wide range of applications because of its many excellent properties.
Aluminum and its alloy are one of the most economical and applicable materials which are widely used at present. Since 1956, aluminum production in the world has exceeded copper production, ranking first in non-ferrous metals. We are aluminium ingot supplier
Aluminum ingot China Specifications
2, high standard.
3, High quality.
4, Competitive price
Chemical composition: Al
Weight: 20 / 25kg
Al (Min): 99.9%, 99.85, 99.7%, 99.5%….
Place of Origin: China (Mainland)
Appearance: Silvery white
Bundling, 805mm * 180mm * 100mm / block 810mm * 810mm * 1020mm / bundle
Bundling, 810mm * 180mm * 100mm / block 810mm * 810mm * 1020mm / bundle
Composition and materials
Grade | Chemical Composition % | |||||||||
AL>= | Impurities<= | |||||||||
Si | Fe | Cu | Ga | Mg | Zn | Mn | Others | Sum | ||
Al99.9 | 99.90 | 0.50 | 0.07 | 0.005 | 0.02 | 0.01 | 0.025 | – | 0.010 | 0.10 |
Al99.85 | 99.85 | 0.80 | 0.12 | 0.005 | 0.03 | 0.02 | 0.030 | – | 0.015 | 0.15 |
Al99.7 | 99.70 | 0.10 | 0.20 | 0.010 | 0.03 | 0.02 | 0.030 | – | 0.030 | 0.30 |
Al99.6 | 99.60 | 0.16 | 0.25 | 0.010 | 0.03 | 0.03 | 0.030 | – | 0.030 | 0.40 |
Al99.5 | 99.50 | 0.22 | 0.30 | 0.020 | 0.03 | 0.05 | 0.050 | – | 0.030 | 0.50 |
Al99.00 | 99.00 | 0.42 | 0.50 | 0.020 | 0.03 | 0.05 | 0.050 | – | 0.050 | 1.00 |
Company’s main business scope is aluminum and the aluminum sheet, aluminum cathode copper production and sales of ingot magnesium , lead ingot, zinc ingot, tin ingot, aluminium ingot, ADC12, as well as a variety of scrap metal, because of high quality products and reasonable export prices, which is to cultivate the foundation of our strong technical capabilities and market mainly in continental Europe, the americas, Africa and the Middle East.
Due to many grades, please feel free to contact us if you want to know the detailed specification.
Item: aluminum alloy ingot
Weight: 6KG
Grade: LYD112, ZLD101, ZLD101A, ZLD102, ZLD106, ZLD107, ADC10, ADC12, AC4B, A3870, 51K, A365 etc.
We are Aluminum alloy ingot supplier and Aluminum alloy ingot factory
Technical specification:
Due to many grades, please feel free to contact us if you want to know the detailed specification.
Packing: Approx 500~900kg each bundle strapped by steel bands without any wooden pallets, total 13 layers including foot ingots, no double stacked bundles.
We also provide scrap copper wire, 6063 Aluminum bar, Zinc alloy ingot, cobalt sheet and soon
Number | Chemical composition % | ||||||||
impurities ≤ | |||||||||
Cu | Si | Mg | Fe | Zn | Mn | Ni | Sn | Al | |
ADC12 | 1.5-3.5 | 9.6-12 | 0.3 | 0.9 | 1.0 | 0.5 | 0.5 | 0.3 | >86 |
Company’s main business scope is aluminum and the aluminum sheet, aluminum cathode copper production and sales of ingot magnesium , lead ingot, zinc ingot, tin ingot, aluminium ingot, ADC12, as well as a variety of scrap metal, because of high quality products and reasonable export prices, which is to cultivate the foundation of our strong technical capabilities and market mainly in continental Europe, the americas, Africa and the Middle East.
Aluminum bar can be used in aviation, aircraft construction, rivet, trailer wheel, the propeller components, metallic building material, forging material, welding material, etc.
Aluminium Rod Alloy 6063 Round Bar For Moulding
- Tempers: T6,
- Available shapes: Flats, squares and rounds
- Standard: ISQ SGS ASTM ENAW
6063 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.7075 Aluminum bar , aluminum bar for aircraft construction
6063 Aluminum bar is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures, and in rifles for the American military.
2024 Aluminum bar Application:
Aluminum bar can be used in aviation, aircraft construction, rivet, trailer wheel, the propeller components, metallic building material, forging material, welding material, etc.
We also provide scrap copper wire, 6063 Aluminum bar, Zinc alloy ingot, cobalt sheet and soon
Grade | 6063, 6061, 2024, 7075 etc |
Round Bar Extruded | φ10mm – φ410mm |
Round Bar Drawn | φ1.0mm – φ10.0mm |
Square & Flat Bar | 8mm x 8mm – 570mm x 10mm |
Angle Bar | 8mm x 8mm x 1mm – 280mm x 40mmx4mm |
U Bar | 10mm x 10mm x 1mm – 110mm x 260mm x 16mm |
Roopam Steel is top manufacturer & supplier of seamless steel pipe welded tubes in ferrous and non ferrous material, Stockist of high quality tubular piping products and accessories in India. Call us for more Info at +91-22-6639 4333.
Introduction
pre disposal waste aluminum is a common name for recycled aluminum.
After pretreatment, part of the recovered aluminum will be cold-processed to turn it into powder aluminum, while the other part will be recycled by means of heavy medium dressing and parabolic dressing.
recycled aluminum Processing method
The purpose of the pre-disposal of waste aluminum is to get rid of other metals and impurities mixed in the waste aluminum; to classify the waste aluminum according to its composition, so that the alloy components in the waste aluminum can be used to the maximum extent; and to dispose of the oil, oxide and paint on the surface of the waste aluminum.At the end of the pre-treatment, the waste aluminum is disposed into the burden suitable for the furnace conditions, and the fourth is to make the aluminum (including alumina) that is guessed correctly by the waste aluminum get the most economical and reasonable use.
The pre-disposal skills of ALUMINUM SCRAP supplier are very brief and backward. Even in large recycled aluminum plants, the pre-disposal skills of waste aluminum are not relatively advanced.In terms of the disposal method for recovery and recycling of waste aluminum of a single type, waste aluminum of a single type or no other impurities is usually not pre-disposed in a disorderly manner, but only classified according to the type and composition of the waste and accumulated independently.A single type of aluminium scrap when use only check assay gives a composition, can know the composition of batch, is high-quality recycled aluminium material, usually need not to make any advance disposal charging melting, in a certain aluminum alloy melting, can choose the corresponding components and types of aluminium scrap directly participate in reverberatory furnace smelting, and can be easily melting into the corresponding trademark of aluminum alloy.Some waste aluminum containing high copper and zinc can also be used as the central alloy for adjusting the composition of aluminum alloy in the smelting process.In the enterprise that chooses small reverberatory furnace or crucible furnace, want to want according to need to break large volume waste aluminium (shear or other method) the material that accords with furnace standard is quick.It is worth mentioning that a small number of non-aluminum metals will be mechanically contained in some single type of China scrap aluminum, such as scrap steel parts such as screws on the Windows and doors of scrap aluminum, although the content is very small, but will seriously affect the quality of the alloy, so it must be separated before smelting.
Heavy medium dressing
That is, the method of heavy media heavy selection is used to separate the heavy non-ferrous metals, such as copper, whose density is higher than that of aluminum, which USES the principle that the density of aluminum is smaller than that of other heavy non-ferrous metals, so that the waste aluminum floats on the medium, while the heavy non-ferrous metal sinks on the bottom, achieving the purpose of separation.But the key is to screen a medium that is denser than aluminum and less than copper, and that medium is not water or any other liquid, definitely a fluid.When the fluid is doing reciprocating motion, the waste aluminum is floating on the top of the medium is separated.
metallurgical accessories Parabolic dressing
By using the principle that objects of basically the same volume fall at different points when they are thrown out by the same force, various waste non-ferrous metals with different densities in the scrap aluminum can be separated.When the same force is used to shoot an object with different density but basically the same volume along a straight line, various objects move along the direction of the parabola and have different landing points.The simplest experiment can be carried out on a horizontal conveyor belt. When the mixed wastes run at high speed along the conveyor belt, the waste aluminum is thrown out along a straight line at the end of the operation. Due to the different gravity of various wastes, the waste aluminum falls to the ground at different points, so as to achieve the purpose of waste aluminum separation.In this way, recycled aluminum, copper, lead and other wastes can be separated evenly.The equipment manufactured according to this principle has been adopted in foreign countries and is in the research stage at home.
Really, before comparison, we require to clarify meaning. The cast iron is suggesting a group of iron product, whose carbon content is more than 2.1%. For that reason, it consists of many different kinds according to different graphite forms and also microstructures, such as grey iron, ductile iron, white iron, flexible iron, vermicular iron, austenitic iron, and so on.
As a result, strictly speaking, you can not compare cast iron with ductile iron, since ductile iron is simply a sort of cast iron. However, you might find the material demands simply written as “Cast Iron”, and no other requirements. Under these scenarios, according to our experience, the developer’s meaning was “grey iron”.
Why do we say so? Because grey iron is one of the most common cast iron products, and also its manufacturing cost is the most affordable one compared with all other cast iron materials. So, if the consumers just needed to utilize “cast iron”, after that the grey iron will be the very best choice.
Ok, so let us compare ductile iron with all other cast iron.
Benefits:
Ductile iron is likewise extremely usual and good material worldwide. It has the following advantages:
1. Fully grown manufacturing innovation.
Many iron factories might create ductile iron effectively, their physical residential properties could be managed purely. Grey iron additionally has these benefits, a lot of iron shops could generate grey iron extremely well too, but when it comes to other cast iron products, not many factories might create them.
2. Low cost.
Costs are always a crucial concern for customers. Ductile iron just needs some additional nodular representative products than grey iron, so its manufacturing costs are just some higher than most inexpensive grey iron, yet much lower than flexible iron as well as austenitic iron. This is likewise the major reason that pliable iron is replacing flexible iron.
3. Excellent mechanical residential properties.
Ductile iron has some good mechanical properties than other cast irons. For example, its highest tensile stamina can get to 900 Mpa, the largest prolongation can reach 18%, moreover, its has good influence residential property, even great impact building in reduced temperature level condition. In addition, after ideal heat treatment, its physical residential properties could be improved substantially.
Negative aspects:
No any type of product is excellent, pliable iron also has some disadvantages.
1. Somewhat high manufacturing prices.
Although we claimed ductile iron is not pricey, its rates are not the most affordable. It is still more expensive compared to grey iron, as a result of additional spheroidizing agent alloys, and also pig iron of high quality. So, if grey iron can meet your needs and application, then you must not choose ductile iron.
2. Relatively high needs for quality control.
When it comes to grey actors iron, the primary assessment of material quality is just tensile toughness, only if you have special demands to the hardness. So, also the traditional cupola heating system could produce this product very well.
Nevertheless, ductile iron needs to inspect tensile strength, return strength, elongation, solidity, nodular rate (spheroidization rate. For that reason, it needs the ductile spreading manufacturers to have enough experience and also equipment to create the spreadings, as well as evaluate their quality in-house.
3. Can not satisfy some unique physical needs.
Although ductile iron has superb mechanical residential properties, yet it can not cover all facets. For example, compared to ductile iron, grey actors iron has far better resistance to deformation throughout home heating, so most range, as well as central heating boiler parts, were made of grey iron. Additionally, as for some alloy irons, they will certainly have better homes, such as anti-heating, wear-resisting, corrosion-resisting. Flexible iron has better ductility, and austenitic iron has higher tensile strength.
Here, allow us briefly introduce the primary distinctions between ductile iron as well as grey iron.
Ductile iron has greater tensile toughness, yield stamina, and also elongation.
Grey iron has reduced prices, as well as less complicated to be created.
We are ductile iron pump suppliers. Please feel free to contact us.
Yoobond Service Team Provides the one-stop Solution for Primary Services needs of its sale and after-sales subdivisions.Updated suggestions and information will be provided to customers in time.
Yoobond Management team strictly follows the ISO9001:2008 Standard system,We have a series of executive sequences a more effective service supply chain to our customers consistently.
Yoobond R&D team is staffed with trained professionals that could help customers find solutions for new composite panels and General feedback . New developing products such as Special surface for Aluminum composite Products,Aluminum PVC foamed Composite panels. Aluminum MDF Composite Panels,metal composite panel and FRP PP Honeycomb composite panels which from sourcing qualified raw materials and improving the Composting production processing.
BEISAI is large-scale joint-stock group foundry enterprise, divided into Hebei BeiSai Metal Products Co., Ltd and ShiJiaZhuang BeiSai Trade Co., Ltd. which was builded in 2003, located in ShiJiazhuang province City. company net assets is up to CNY 45 Milion, The annual production capacity of 60000 Tons casting iron parts. More than 300 employees here. There are 5 senior casting engineers and 21 technical engineers etc. We have 26 sets of centrifugal casting machines and 5 sets of autoumatic machine painting lines and 3 sets of automatic hydraulic pressure testing machines, we have very perfect testing and checking equipment and testing lab, 100% make sure all products are top-quality.
At present our major products and service is Casting Iron Pipes, Fittings, SS Couplings, Carton Steel Clamps which was used for sewer drainage system of buildings. And Casting iron manhole covers and frame, Casting tree gate and Casting valves , fire protection fittings and connectors, Casting cooking hardware, etc.
We also can produce all kinds of large or small machine casting parts and auto casting parts and pump housing and pump console/ impeller and casting pulley according to the drawing or samples.
All our products are fully meet USA and European and National standard ASTM A888/CISPI301/CSA B70, ASTM-A536, DIN 19522, EN877, BS EN877, ISO6594, BS437, BS416, KSD 4307, EN124:1994, BS 497-1:1976, ISO2531, BS EN545/EN598, AWWAC 151, KSD 4311, AS 2280, GB/T13295, GB/T12772 etc.
C-shaped hooks for hanging posters and signs, store decoration and display items, and for hanging and connecting various items. These CNC Wire hooks wholesale are made of durable 2mm thick metal wire.
Other sizes can be provided on request.
A pack of 100
More information please click here.
3 Type 2 Wall Tie(CE marked)
Product Name: Type 2 Wall Tie(CE Marked)
Item Code: Smart Craftsmen-WTT2
Surface Treatment: Shiny.
Raw Material: Stainless Steel 304( Grade1 4301) or Up on your request.
Package: 250 pieces / Inner Box, 2 or 4 Inner boxes / Master Carton.
Place of Origin: Hebei, China.
Standards: PD 6697 and EN 845-1:2013+A1:2016.
The type 2 wall ties for sale are suitable for general-purpose neckties with a space between 50mm and 150mm, which can be used in European domestic residential and small commercial buildings up to 15 meters high. Smart Craftsmen Type 2 wall ties are CE marked, and the measured dynamic stiffness <113MN/m3 meets the requirements for external masonry walls
Approve the performance requirements of Document E. The test result meets the PD 6697 standard and confirms BS EN 845-1: 2013 + A1: 2016.
benefit
Answer: The specially designed safety end provides an excellent mortar key, which reduces the risk of on-site injury and prevents entanglement.
B: Clear and easy to distinguish packaging, which can be conveniently used on site when different types of wall ties are needed.
C: It is made of corrosion-resistant stainless steel, and high-strength steel wire is cold bridged to minimize heat loss.
D: Multiple drops can prevent water from flowing in any direction where the cable tie is installed.
note
Other special length and wire thickness can be provided according to customer requirements.
Wind Proof Rain Proof Security Door Laminated Glass French Casement Door
Quick Details
Warranty: More than 5 years
After-sale Service: Online technical support
Project Solution Capability: graphic design, total solution for projects, Others
Place of Origin: Foshan, China
Brand Name: GANGYA GROUP
Model Number: Aluminum casement door
Open Style: Swing
Position: Interior
Surface Finishing: Finished
Door Material: Glass
Standard/Certificate: Comply With AS2047 DADE NFRC
Glass Standard: Comply with AS2208 & ANSIZ97.1
Frame Material: Aluminum Alloy
Glass choice: 5+12A+5mm tinted,Other
Ultimate strength: 4500 pa
Sealing Rubber: EPDM
Color: Matt black; white; ultra silver; clear anodized; nature clean aluminium
Extrusion alloys: 6063-T5 profile with1.4-1.6mm thickness for windows
Hardware: HOPO, RUNAS OR CHINESE BRAND
APPLICATION: Available for housing series; residential series; commercial series
Type: Hinge door
Supply Ability: 180000 Square Meter/Square Meters per Year Aluminum casement door
https://www.gangyagroup.com/product-list-aluminium-windows-and-doors.html
Packaging Details
powder coated aluminum doors Packing:
- Protective tape protects frames from scratches;
- Keep windows or doors fixed on iron pallets;
- Tie up windows or doors on the iron pallets with plastic belts;
- PE films to keep away from sea water;
- Fill in the space between each two iron pallets by air bags;
- Tie up iron pallets in container with plastic belts.Our packages will ensure the windows and doors arrive at project job site in good conditions.