Double-twist stranding machines, high-performance twisting machines
Double Twist Stranding Machineare effective, compact production units primarily for use in the manufacture of highly flexible braids, bundled braids, for stranding pairs of wires, triples, quadruple designs …
The machine concept differs from the single-twist system in that one rotor turn generates two cable twists / turn. The braid is given the first twist at the stranding point of the system feed. At this point, the stranding material still has twice the length of lay of the desired final geometry. The final braid length of lay with the second stranding twist is only completed at the second turning point, before being introduced back into the static coil former.
BOW DOUBLE TWIST STRANDING MACHINE
Application for:
Multistrand 7 or 19 copper wire, aluminum wire, tinned copper conduct etc. Also multistrand insulated conduct for power cable, data cable, control cable etc. Laying up of 2/3/4 cores of small size building wires.
Bow Double Twist Stranding Machine Description:
Payoff
Double twist stranding machine
PLC control system with color touch screen
Advanced function (Optional):
1:Motorized payoff or back-twist payoff, tension keep stable from start to end.
2:Bow material : carbon fibre
3:Brake: serve motor
4:Motorized driven capstan. Lay length set on touch screen, no need to change gear mechanically.
5:Auto lubrication system: regularly lubricate important parts to prolong machine service life.
COMPUTER SIMULATION OF AN INDUSTRIAL WIRE DRAWING PROCESS
Wire Stranding Machine is an important industrial process. Wires are reduced in diameter through a series of die/capstan combinations which provide the desired reduction steps. Typical wire drawing machines within BICC Cables Ltd use up to twenty-one dies in one line and it is necessary to optimise the die drafting for each machine and final wire diameter to obtain good machine efficiency and high quality product. An important aspect in the manufacturing process is to avoid wire breakages with the resultant loss of production due to short final lengths and the associated time required to restring the drawing machine. In order to optimise the conditions for each machine and wire size, computer simulations of the process are used to predict performance by estimating factors such as the ratio of drawing stress to ultimate tensile stress, drawing force, back tension and heat generated.
A computer simulation of the multi-line wire drawing process for copper wire has been modelled by the Wrexham Technology Centre of BICC Cables Ltd using a bulk model. The redundant work during the drawing process was included by formulation and equations for the redundant deformation were derived that were in good agreement with published experimental work.
A new computer simulation has been developed to predict the performance of wire drawing process. The model uses a one dimensional explicit finite difference method to determine the plastic deformation in the dies. The redundant work formulation was used as in the previous simulation. This paper describes the numerical methods used and compared the results from the new computer simulation with the previous bulk model. Significant differences are predicted in the stress ratios, drawing force and heat generated for process predictions. The new simulation of the plastic deformation in the dies also indicated optimum semi-die angles away from the traditional eight degrees.
7 Wire Tubular Type Stranding Machine
Owing to the vast industry experience and in depth knowledge of this domain, we are offering a huge collection of high quality 7 Wire Tubular Type Stranding Machine. These products are manufactured using optimum quality raw material. These products are easy to install and requires low maintenance. Customers can avail these products from us at market-leading prices
Basket Type Stranding Machine
Basket Type Stranding Machine is mainly used to strand not only copper/aluminum conductor for the electric wire and cable but also the cable core, steel core, and steel rope. Machine’s make-up: pay-off, driving part, cylindrical part, hydraulic brake device, wire –bobbin frame, die-holder, haul-off device, spindle-type take-up/traversing (Φ50 bar traversing) and an electrical control part, etc.
Rigid Stranding Machine
The Rigid Stranding Machine is used for stranding CU, Al wires, and conductors. Stranding unilay and reverse concentric, round, compressed, compacted or sector-shaped ( straight or spiraled) as per customer requirements.
Main features:
Self-supporting rigid rotor design with 1 6 12 18 24 30 36 Bobbin Cage
High efficiency and speed
Bobbins mounted on pintles
A line drive by A.C. or D.C. motors with electronic or mechanical synchronization between line components.
Different braking device for bobbins
Centralized lubricating system for bearing
Disk type Pneumatic brake for Cage.
Machines with or without back twist
MMI /PLC Equipped, optional
Easy Lay Setting
High Speed Tubular Stranding Machine
High Speed Tubular Stranding Machine with back twist, for 1+6 Bobbin copper / aluminum round & compact conductors and steel wire stranding. This strander is for manufacturing high carbon & low carbon steel wire rope, copper & aluminum conductor
Bow Type Stranding Machine
The Bow Type Stranding Machine is suitable for a wide range of productions, obtained with high speed and productivity; the back twist process gives high quality products. The Bow stranders use components made with most modern materials, like carbon fiber for the bows, tungstene carbide for bushes, hardened steel for rollers.The control of tension of the cores is assured with electro-mechanical or pneumatic self compensated brake, with set up by control panel.The safe use is assured with control of bearing temperatures and supports vibration.The machine is protected with a soundproof cover, with pneumatic open, inside fans and lights.Is possible the bobbins side loading with a motorized trolley, that avoids the use of bridge cranes and reduces dramatically the total loading time of the line.
For Cables Industry:
Stranding of conductors made with copper, aluminium, aluminium alloy, aluminium steel reinforced or supported;
Laying up of 2 – 7 round insulated cores for low and medium voltage;
Laying up of 2 – 7 straight sector shaped insulated cores, with the rotating cradles version;
Possible application of fillers and tapes of every type.
Tubular stranding Machine
The Tubular Stranding machine consists of bearing stands made of welded steel for the tube bearings. Up to reel size of 630mm .The stranding rotor is built up from welded tubes with wire guidings outside the tube. The reels are held in cradles, which are positioned inside the tube. A light beam along the complete length of the machine monitors, if the pneumatically (optional)operated reel-pintles are securely closed and the cradles are in safe condition. The machine is equipped with wire break detectors for each segment, pneumatic disk-breaks and individual drives for the Stranding Rotor, the Capstan and the Take-Up. The operator’s desk gives full control over parameters like Rotor-speed, lay-length and production length.
Main Features:
• Machine placed on a Rigide steel frame with rotor support, fixed on the floor for an easy installation
• Tube rotating on encircling bearings or rollers
• Machine able to work in torsion or total back twist with the possibility of partial back twist
• Wire back tension kept constant from full to empty spool payoff
• Wire/strand break detector for each payoff unit(optional)
• Spool loading/unloading by crane
• Pneumatic pintles equipped with safety locking system
• Independent driving motors for tube, capstans and takeup units
• A.C. motors with flux vector control inverter
Grass Manhole Cover
Product Information: Manhole Covers,Gratings are manufactured for Construction, Electric, Water, Gas, Sanitary Product specifications: 700mm*650mm*580mm
Grass manhole cover along with elegant look and also extreme sturdiness, grass manhole cover is made from stainless-steel quality 304 in one marking procedure, which are defined by lengthy life span, high compressive strength as well as very easy installment. It is suitable for Local building and also Urban greening.
Unlike regular recessed covers, grass manhole cover include pre-drilled drainage openings which enable rainwater to drain pipes via normally. Incorporated with our copyrighted technology, this water is filtered and lawn will expand inside the tray. Inevitably this leads to a cosmetically pleasing remedy for client and professional. The covers can additionally be loaded with various other materials such as rubber crumb, synthetic grass, decorative crushed rocks or any type of porous surfacing product.
Unique sizes can be manufactured as needed.
Product Properties
- Product Information: Manhole Covers,Gratings are manufactured for Construction, Electric, Water, Gas, Sanitary
Road Facility and Public use.
- Material: Stainless steel, hot dip galvanized
- Designs: EN124 A15, B125, C250, D400, E600 and F900, As per customers’ drawings or samples
- Process: Molding – Casting -Cleaning- Coating- Packing – Shipping
- Coating: Cold applied black bitumen; Without coating; Coating as per customers’ requirement
- Different accessories are available
- Packing: Steel or wood pallet, or as per customers’ requirements
Grass Manhole Cover Features
UV-resistant material makes it possible for application of the covers in areas with higher UV-radiation.
grass manhole cover displays premium Weather condition resistance attributes compared to regular polymer concrete or plastic manhole cover.
Life span: greater than 30 years.
THE BASICS
pre-drilled drain openings
patented innovation
high stamina: constructed from stainless-steel quality 304in one stamping procedure.
severe toughness as well as corrosion resistance.
visual solutions: enables developing visually smooth flooring
The “358” in the 358 fence indicates the specific specifications of this type of guardrail: the mesh hole is 76.2mmx12.7mm, namely 3 “x0.5”, and the wire diameter is usually 4.0mm, namely 8#. Of course, 358 guardrail is an expression of the name of this kind of guardrail, and the specific specifications can be adjusted according to the actual needs of customers.
358 Screen general specifications: mesh: 12.7×76.2mm or can be adjusted to 12.5x75mm or 13x75mm according to customer’s actual needs
Wire diameter: 3.0-6.0 mm
Network height: 1.8m, 2.0m, 2.4m, 2.7m, 3.0m, 4.4m, 5.2m
Network width: 2m, 2.5m, 3m.358
Fence net features: strong anti-climbing ability, strengthen the net to increase the extent of its destruction, long use time, durable.
The prison high security protection net in the prison protection net, the use of large diameter high strength alloy steel wire production, with anti-climbing, impact resistance, shear resistance characteristics and good deterrent effect, dedicated to prison detention center, cordon military base and other high security fields.
358 protection net anti-corrosion form: electroplating, hot plating, spraying, dipping, galfan silk.
358 safety net main use: 358 safety net is mainly used in prisons, posts, frontier defense, surrounded areas, military defense and other high risk areas of protection and municipal garden protection net.
ASTM A453 Specification describes detailed requirements of grade 660 in class A,B,C & D.
ASTM A453 Grade 660
ASTM A453 Grade 660 Class A Specification
ASTM A453 Grade 660 Class B Specification
ASTM A453 Grade 660 Class C Specification
ASTM A453 Grade 660 Class D Specification
ASTM A453 Grade 660 Pdf
ASTM A453 Grade 660 Bars Stock
ASTM A453 Grade 660 Bolts
ASTM A453 Grade 660 Chemical Composition
ASTM A453 Grade 660 Class A Bars Stock
ASTM A453 Grade 660 Class A Bolts
ASTM A453 Grade 660 Class A Countersunk Screws Csk
ASTM A453 Grade 660 Class A Fasteners
ASTM A453 Grade 660 Class A Forgings
ASTM A453 Grade 660 Class A Heavy Hex Bolts
ASTM A453 Grade 660 Class A Heavy Hex Nuts
ASTM A453 Grade 660 Class A Hex Bolts
ASTM A453 Grade 660 Class A Hex Cap Screws
ASTM A453 Grade 660 Class A Keys
ASTM A453 Grade 660 Class A Pins
ASTM A453 Grade 660 Class A Push Bolts Rods
ASTM A453 Grade 660 Class A Rings
ASTM A453 Grade 660 Class A Rods Stock
ASTM A453 Grade 660 Class A Set Screws Grubs
ASTM A453 Grade 660 Class A Socket Head Cap Screws
ASTM A453 Grade 660 Class A Stud Bolt
ASTM A453 Grade 660 Class A U Bolts
ASTM A453 Grade 660 Class A Washers
ASTM A453 Grade 660 Class A Wire Rod Stock
ASTM A453 Grade 660 Class B 12 Point Screws
ASTM A453 Grade 660 Class B Bars Stock
ASTM A453 Grade 660 Class B Bolts
ASTM A453 Grade 660 Class B Countersunk Screws Csk
ASTM A453 Grade 660 Class B Fasteners
ASTM A453 Grade 660 Class B Forgings
ASTM A453 Grade 660 Class B Heavy Hex Bolts
ASTM A453 Grade 660 Class B Heavy Hex Nuts
ASTM A453 Grade 660 Class B Hex Bolts
ASTM A453 Grade 660 Class B Hex Cap Screws
ASTM A453 Grade 660 Class B Keys
ASTM A453 Grade 660 Class B Pins
ASTM A453 Grade 660 Class B Push Bolts Rods
ASTM A453 Grade 660 Class B Rings
ASTM A453 Grade 660 Class B Rods Stock
ASTM A453 Grade 660 Class B Set Screws Grubs
ASTM A453 Grade 660 Class B Socket Head Cap Screws
ASTM A453 Grade 660 Class B Stud Bolt
ASTM A453 Grade 660 Class B U Bolts
ASTM A453 Grade 660 Class B Washers
ASTM A453 Grade 660 Class B Wire Rod Stock
ASTM A453 Grade 660 Class C Bars Stock
ASTM A453 Grade 660 Class C Bolts
ASTM A453 Grade 660 Class C Countersunk Screws Csk
ASTM A453 Grade 660 Class C Fasteners
ASTM A453 Grade 660 Class C Forgings
ASTM A453 Grade 660 Class C Heavy Hex Bolts
ASTM A453 Grade 660 Class C Heavy Hex Nuts
ASTM A453 Grade 660 Class C Hex Bolts
ASTM A453 Grade 660 Class C Hex Cap Screws
ASTM A453 Grade 660 Class C Keys
ASTM A453 Grade 660 Class C Pins
ASTM A453 Grade 660 Class C Push Bolts Rods
ASTM A453 Grade 660 Class C Rings
ASTM A453 Grade 660 Class C Rods Stock
ASTM A453 Grade 660 Class C Set Screws Grubs
ASTM A453 Grade 660 Class C Socket Head Cap Screws
ASTM A453 Grade 660 Class C Stud Bolt
ASTM A453 Grade 660 Class C U Bolts
ASTM A453 Grade 660 Class C Washers
ASTM A453 Grade 660 Class C Wire Rod Stock
API 6A Bolting Torque for Flanges (SI Units)
API 6A Bolting Torque for Flanges (USC Units)
ASTM A453 Grade 660 Class D API 6A Full Thread Stud Bolt
ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt
ASTM A453 Grade 660 Class D Bars Stock
ASTM A453 Grade 660 Class D Bolts
ASTM A453 Grade 660 Class D Countersunk Screws Csk
ASTM A453 Grade 660 Class D Fasteners
ASTM A453 Grade 660 Class D Forgings
ASTM A453 Grade 660 Class D Heavy Hex Bolts
ASTM A453 Grade 660 Class D Heavy Hex Nuts
ASTM A453 Grade 660 Class D Hex Bolts
ASTM A453 Grade 660 Class D Hex Cap Screws
ASTM A453 Grade 660 Class D Keys
ASTM A453 Grade 660 Class D Pins
ASTM A453 Grade 660 Class D Push Bolts Rods
ASTM A453 Grade 660 Class D Rings
ASTM A453 Grade 660 Class D Rods Stock
ASTM A453 Grade 660 Class D Set Screws Grubs
ASTM A453 Grade 660 Class D Socket Head Cap Screws
ASTM A453 Grade 660 Class D Stud Bolt
ASTM A453 Grade 660 Class D U Bolts
ASTM A453 Grade 660 Class D Washers
ASTM A453 Grade 660 Class D Wire Rod Stock
ASTM A453 Grade 660 Countersunk Csk Screws
ASTM A453 Grade 660 Fasteners
ASTM A453 Grade 660 Forgings
ASTM A453 Grade 660 Heavy Hex Bolts
ASTM A453 Grade 660 Heavy Hex Nuts
ASTM A453 Grade 660 Hex Bolts
ASTM A453 Grade 660 Hex Cap Screws
ASTM A453 Grade 660 Keys
ASTM A453 Grade 660 Mechanical Properties
ASTM A453 Grade 660 Pins
ASTM A453 Grade 660 Push Bolts
ASTM A453 Grade 660 Rings
ASTM A453 Grade 660 Rods
ASTM A453 Grade 660 Set Screws
ASTM A453 Grade 660 Socket Head Cap Screws
ASTM A453 Grade 660 Stud Bolts
ASTM A453 Grade 660 U Bolt
ASTM A453 Grade 660 Washers
ASTM A453 Grade 660 Wire
Bath Handle Pull YD-BHP12
Item no.: YD-BHP12
Description: Door Handle Pull
Sanitary Hardware Material: Aluminium/zinc alloy
Size: available, customized
Usage: bath hardware, furniture hardware
Process: die casting, machining, surface treatment
Surface: PVD finished, satin nickel, black, mirror finished, bronze, customized
Find here details of GSR selling internal thread cutting. All the thread cutting tools with super quality and competitive price. Our company is a leader in the industry and we will not disappoint you.
We have a whole set of quality management system to guarantee the quality of our products as well as after sale service. GSR tools main products include internal and external threading tool.
The palisade fence is popular in British, Ireland. It could take you a safe life, also beautify your living spaces.
The use of post accessories and fittings can better help the mesh and post connection. And it is easy and safe.
Anti climb fence is the ultimate security fencing system. The close mesh is used in prisons and other secure facilities as it is virtually impossible to climb. The close mesh also means that the fence is very difficult to cut with anything but power tools.
HUAGUANG FENCE is professionally engaged in manufacturing and sales of good quality wire mesh fence, chain link fence, temporary fence, anti climb fence, palisade fence and different wire mesh products. All are cheap price.
Model No.: LJJS-CNC-500×600
PRODUCT DESCRIPTION
CNC Corner Connector Automatic Cutting Saw Equipment Features
■ This machine is mainly for alum windows corner stake cutting, also used for cutting Alum & PVC profiles.
■ PLC auto program controlling, man-machine interface is colored touch screen, input the cutting size and quantity, then it can cut automatically.
■ Automatic feeding system take the linear guiderail and high precision ball screw, driven by stepping motor. High feeding precision and efficiency.
■ Saw blade spindle take special high accuracy spindle, end face and radial runout are less 0.01mm, cutting surface is highly polished.
■ Saw blade feeding system adopts linear guiderail, with high accuracy and high speed (can be stepless speed regulation)
■ Carbide saw blade give accurate processing and high efficiency.
■ Special workpiece clamping system, besides processing common corner stake, it can also process middle frame corner stake.
■ All closed machine body and cover, with good appearance, safe working and low noisy.
CNC Corner Connector Automatic Cutting Saw Technical Parameter
■ Power: 380V 50Hz
■ Motor Rate: 2.2Kw
■ Saw Blade Diameter: Φ500mm
■ R.P.M: 2800r /min
■ Cutting Width: 135mm
■ Automatic Profile Feeding Length: 4-600mm
■ Working air pressure: 0.5－0.8Mpa
■ Weight: 600kg
If you want to know more, you can click here.
Model No.: LJZ2 -450×3700
PRODUCT DESCRIPTION
Double Head Cutting Saw Equipment Feature
■ Used for aluminum profile cutting.
■ Carbide saw blade give accurate processing and high endurance.
■ The two heads can work independently and simultaneously.
■ Cutting off the required length and two end angles is available by one time processing
Double Head Cutting Saw Technical Parameter
1) Power supply: three phase, four line 380V, 50Hz
2) Saw motor: 1.5Kw x 2, 2,800r/min
3) Pulling motor: 0.55Kw, 1,400r/min
4) Working pressure: 0.4 – 0.6MPa
5) Air consumption: 200L/min
6) Cutting length: max 3,700mm; min. 400mm
7) Cutting width: max 120mm
8) Cutting height: max. 200mm
9) Cutting angle: 0° – 45°
10) Cutter feeding speed: 0 – 3m/min
11) Saw diameter specification: 450mm x 4mm x 30mm-120
12) Overall dimensions: 4,500mm x 1,100mm x 1,400mm
Processing Accuracy
■ Repeat locating length: ≤0.2mm
■ Cutting angle allowance: ±5′
■ Cutting profile surface planeness: ≤0.10mm
■ Cutting profile surface roughness: Ra12.5μm
If you want to know more, you can click here.
Dutch woven wire cloth can be woven into plain Dutch weave and twill Dutch weave. They each have their own characteristics and can be used for different applications.
Inner Mongolia Pusheng Iron & Steel Co,.Ltd is a comprehensive company for steel production and trading. Its business includes production, processing, distribution, logistics and import& export of steel. We have been processing and selling high quality , value add steel products to customers throughout all over the world .
Our company lies in Hohhot , inner Mongolia , it is near by BAO STEEL , The superior location provides us with quality products and reasonable prices , By creating long term relationships and building trust with clients and suppliers, Pusheng is able to offer our clients comprehensive and competitive sales packages with quality goods along with excellent customer service, establishing a firm reputation in inner mongolia ’s steel industry.
Our main products : hot rolled steel coils/sheet , cold rolled steel coils/sheet , galvanized steel coils/sheet /pipe , prepainted steel coil, corrugated sheets and tinplate coils,Ms pipe /plate, stainless steel sheet /pipe etc.
High security fence, also called 358 fence, which is well-known as anti-climb and anti-cut fence. Perfectly suited to high security applications, like military, airport, prison, warehouse, factory etc.
358 Security mesh fence , also called 358 welded mesh fence , it can be used to prisons, military base, power plants, oil refineries, airport terminal, and etc.
PRODUCTS DESCRIPTION
Components:
The HIGH TENSILE ROCKFALL MESH system consists of four main components that are carefully coordinated with each other:
- HIGH TENSILE ROCKFALL NET
It is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
| Detailed Product Description:
1. Wire diameter: 3mm 2. High tensile strength 1770Mpa 3. Mesh size:80mm x 140mm 4. Mesh shape:diamond 5. Material:high tensile steel wire 6. Corrosion protection:super coating 7. Coating:150g/m2 8. Breaking load of single wire:12.5KN 9. Tensile strength:110KN/m TECCO mesh standard roll: Mesh edges knotted Roll width: 2.3m-3.5m Roll length: 110m-30m Weight: 1.75kg/m2 |
https://www.xhgabions.com/side-slope-protection-net/
| 2.SOIL OR ROCK NAILS
Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. |
| 3.SPIKE PLATES
Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the HIGH TENSILE ROCKFALL MESH. These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope. The plates are galvanized and have dimensions of 13.0”*7.5″*0.4″(330mm*190mm*10mm). |
| 4.CONNECTION CLIPS
The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These claw are hot dip galvanized and consist of 0.25″(6mm) thick steel spiral. |
| 5. SOIL OR ROCK NAILS
Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. |
ADVANTAGE
Wherever roads, railway lines or other infrastructures need to be protected against rockfall our drapes made from high-tensile steel wire nets are a perfect economical solution. They allow rockfalls to be controlled and guided into the deposition zones.
Rockfall net benefits
full system tested
the performance and behavior of the rockfall drape can be fully calculated with all its
components, as it has been extensively tested as a complete system.
matching mesh to the rockfall intensity
optimum cost/performance ratio, as the required protection can be achieved with different nettings.
easy installation
our meshes and nets have an excellent strength to weight ratio and are easy to transport. They allow easy unrolling for a quick and simple installation. Even high slopes/faces are protected with minimal impact to the natural environment and minimal carbon footprint.
high-tensile steel wire
durable thanks to high resistance: our nets and meshes have a wire tensile-strength of over 1770 n/mm2 and can withstand high dynamic loads without big deformation.
PRODUCTS DESCRIPTION
Gabions are rectangular cages made of hexagonal double-twist wire mesh filled with appropriately sized rock or quarry stone. Gabions are used in many situations including the stabilization of earth movement and erosion, river control, reservoirs, canal refurbishment, landscaping and retaining walls.Gabions are compartmentalized rectangular containers of galvanized steel hexagonal wire mesh that are filled with stone. While maintaining sufficient strength to contain the stone used as a fill, gabions must be able to settle, twist, and conform to channel and foundation shifts.
In order to meet the various needs, gabions must have the following features:
· Hexagonal mesh pattern critical points
· Double twist to avoid unraveling
· Reinforcing wires woven into corners to reinforce critical points
· A diaphragm securely attached at the base that will prevent the shifting of some and reinforce the gabion.
https://www.xhgabions.com/products/
Certification:
- All gabion basket are manufactured in accordance with the requirements of BS EN 10223-3:2013.
- All wire is in accordance with BS EN 10218-2:2012 and BS EN 10223-3:2013
with an ultimate tensile strength of between 350 to 500N/mm².
- All wire used in the gabion production or accessories shall be Zinc or Zinc 90% Aluminium 10% coated in accordance with BS EN 10244-2:2009 (Class A) with an additional extruded organic polymer powder coating (grey,green) of 0.5mm nominal radial thickness. This organic polymer powder coating is in accordance with BS EN 10245-2:2011.
Reno Mattress, also called as gabion Mattress, is designed following the principle of a mass earth retaining wall. The permanence and flexibility of the triple twisted mesh helps to endure and absorb the forces, which may come from stones or flowing water.
PRODUCTS DESCRIPTION
Certification:
- All Reno mattress are manufactured in accordance with the requirements of BS EN 10223-3:2013.
- All wire is in accordance with BS EN 10218-2:2012 and BS EN 10223-3:2013
with an ultimate tensile strength of between 350 to 500N/mm².
- All wire used in the gabion production or accessories shall be Zinc or Zinc 95% Aluminium 10% coated in accordance with BS EN 10244-2:2009 (Class A) with an additional extruded organic polymer powder coating (grey,green) of 0.5mm nominal radial thickness. This organic polymer powder coating is in accordance with BS EN 10245-2:2011.
https://www.xhgabions.com/gabion/
Specification:
| Mesh Wire(mm) | Selvedge Wire(mm) | Lacing Wire(mm) | Hole Size(mm) | Length (mm) | Width (mm) | Height(mm) |
| 2.2 | 2.7 | 2.2 | 60×80 | 3 | 2 | 0.17-0.23-0.30 |
| 2.2 | 2.7 | 2.2 | 60×80 | 4 | 2 | 0.17-0.23-0.30 |
| 2.7 | 3.4 | 2.2 | 80×100 | 5 | 2 | 0.17-0.23-0.30 |
| 2.7 | 3.4 | 2.2 | 80×100 | 6 | 2 | 0.17-0.23-0.30 |
A reno mattress is a double twisted hexagonal woven galvanized steel wire mesh compartmented basket with a rectangular mattress shape. The compartment or cells of the reno mattress are of equal size and dimension and are formed by internal diaphragms being placed within the basket providing even distribution of the stone fill throughout the mattress even after structural movement. Even distribution of the stone fill ensures that the reno mattress maintains intimate contact with the foundation soil.
construction & installation
for easy handling and shipping, mattresses are supplied folded flat in bundles of 25. Lids are packaged in separate bundles or in rolls for larger units of mattresses.
Wholesale airport security fence, is mostly made use of in the flight terminal for defense. The main panel and also V panel is welded with 4.0 mm/5.0 mm low carbon steel cable. The surface area therapy of QYM airport fencing is galvanized + electrostatic polyester powder coated or galvanized + PVC layered.
airport fence supplier Material:
Material: Low-Carbon Iron Wire
Application:
Airport, Garden Fence, Residential, etc
Airport Fence Y Type Fence China Specification
| Panel | Mesh | Wire Thickness | Surface Treatment | Panel Width | Folds NOS. | Panel Height | Fence Height |
| Big Panel | 50x100mm 55x100mm |
4.00mm 4.50mm 5.00mm |
Galvanized and Electrostatic polyester coated or PVC coated | 2.50m 3.00m |
4 | 2000mm | 2700mm |
| 5 | 2300mm | 3200mm | |||||
| 6 | 2600mm | 3700mm | |||||
| 2 | 530mm | 2700mm | |||||
| V panel | 630mm | 3200mm | |||||
| 730mm | 3700mm |
PRODUCT DETAILS
Barbed wire can be widely used as accessories for woven wire fences to form a fencing system or security system. It is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing.
Barbed wire is a protective net formed by mechanically winding barbed wire around the main wire through various weaving techniques.
Anti-corrosion, anti-aging, high durable. Barbed wire can be used with chain link or other fencing barriers for added security. It can discourage unauthorized entry and is suited to a variety of containment needs.
Mainly serves in isolation and protection of grassland, boundary, railway, highway,prisons, private residence, bank, bill printing factory, and also widely used in military base, industry, agriculture, animal husbandry, plantation for fencing.
Unifit Metalloys is one of the leading Pipes Manufacturer, Dealer, Supplier and Exporter of Buttwelded Pipe Fittings, Socket Weld Fittings, Threaded Fittings, Forged Fittings, In India. Quality Forge and Fittings is the name of a brand trusted worldwide and used in all leading industries. Trust is the synonym for Quality Forge and Fittings.
Metallica Metals is known worldwide as the most competitive group in the world of Stainless Steel having its headquarters in Mumbai – India. It was incorporated in the year 1975 by 3 dynamic leaders named as Mr. Babulal Mehta, Mr. Jugal Mehta & Mr. Vallabhchand Mehta & they are the reason behind the exponential growth of Metallica Metals.
Who We Are
Ares Engineering is the expert in the manufacturing metal decorative wire mesh for architectural application. With the most advanced facility, we have the most modern and productive mill in China. Our products―whether they’re expanded metal mesh, laser cut sheet, perforated sheet or stainless steel decorative wire mesh―seamlessly blend form and function, challenging the status-quo. Through consistent growth and innovation we strive for the highest quality products at an unbeatable value.
As a major manufacturer and supplier of metal mesh products, we are committed to quality. Our investment in personnel and equipment provides you–customers with innovative and value-based products that meet or exceed your design expectations. From concept to completion, our team of experts and 35 years of experience in metal products can help you choose the mesh that suits your needs.
Our People
At Ares engineering, we are extremely proud of our employees and our commitment to them. Everyone is full of enthusiasm, diligence, dedication, and always strive to pursue the highest quality craftsmanship. They are the heart of our company and the reason why we are able to provide you with high-quality metal mesh products.
We have professional sales staff, engineers, designer, mesh worker, painting technical worker, quality inspector, customer service representatives, and all of the creative, inventive individuals here at Ares that continue to push the boundaries of what metal mesh can be.
With a professional team of product advisors, we are able to guide you in product selection. If your product requires design and technical support, we can provide suitable suggestions, alternatively we can provide price information, availability and lead times.
Company Profile
Ares engineering has been the leading manufacturer of metal mesh products. We are well respected in the industry for being trustworthy in quality and service.
Ares was built as DBL Expanded Metal Mesh Factory in 1986, which only produce the expanded metal mesh at first. With time goes by, our founder introduced many advanced equipment and enlarge our production range, including not only stretched mesh machines, but also punching machines, laser cutting machines, cutting machines, and decorative wire mesh machines. Then we renamed the company name as Anping County Huijin Wire Mesh Co., Ltd on 2008. Next year, we started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology.
With the continuous increase of decorative mesh projects, we invested the international-standard PVDF and Powder Coating Painting line, which can control quality well.
On 2019, we set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. The main purpose of the branch establishment is separating projects from traditional businesses, assembling a dedicated project team which can provide solutions and professional service for metal decorative mesh projects.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
Now in its 36th year of operation, Ares Engineering looks towards the future. With mechanical and technological advancements, we now offer a wider range of patterns than ever before. New partnerships have allowed us to not only offer new types of products, but to provide technical and design suggestion of projects. Though Ares Engineering continues to build and grow, Quality & To meet and exceed customers\\’ expectations will always remain the fundamental core of our business.
History
1986: Built DBL Expanded Metal Mesh Factory
2008: Renamed as Anping County Huijin Wire Mesh Co., Ltd
2009: Started the Production of Aluminum Expanded Curtain Wall Panel and Ceiling System and applied for a patented technology
2012: Invested the international-standard PVDF and Powder Coating Painting line
2019 by now: Set up Branch Company- Hebei Ares Building Decoration Engineering Co., Ltd. Focus on providing solutions and supplying products for metal decorative mesh projects.
Our website:http://www.aresmaterial.com
Silicon Steel Co. is single source of Industrial Pipe Fittings & Flanges, we are Manufacturer, Supplier, wholesaler, Stockholder & Traders of Pipe Fittings, Forged fittings, Butt weld fittings & Pipe Flanges in INDIA & exporting Pipe fittings & Industrial Flanges to more than 30 countries since 2 decades.
- INTRODUCTION
Welded steel tube/pipes are made of cold rolled steel coil or galvanized steel coil, by cold-roll forming through high -frequency welded machine.
Product Features: Simpler production technical process, Higher production efficiency, Lower production cost.
There are mainly two kinds of pipes: one is Black steel tube/ pipe, the other is Pre-galvanized steel tube/pipe.
- APPLICATION
With excellent characteristics of sound surface finish, highly precise, easy to galvanize, easy to bend or reform. Steel pipes are mainly used in Pipeline, Mechanical equipment, Solar energy equipment, Steel structure engineering, Bridge fence, Auto accessories and etc.
- EVER-SHINESPECIFICATION:
Types: round tube, square tube, rectangle tube.
1) Product Name: Black steel tube / pipe
Thickness: 0.40mm~3mm
Outer Diameter: Round 0.30mm~650mm
Square: 8x8mm~500x500mm
Length: 3m~12m or any length as per customer’s requirement.
Standard: BS1387, ASTM A53, ASTM A500, ASTM A513M-06B, GB/16728-2017
Grade: Q195-Q235, 10#~45#
Technique: Cold Rolled, Hot Rolled
2) Product Name: Pre-galvanized steel tube/pipe
Thickness: 0.35mm~2.5mm
Outer Diameter: Round 0.30mm~650mm
Square: 10x10mm~100x100mm
Zinc coating: 20-275g
Length: 4m~12m or any length as per customer’s requirement.
Standard: BS1387, ASTM A53, ASTM A500, ASTM A513M-06B, GB/16728-201
More information please click here.
We use a variety of advanced equipment including shears, CNC punching machines, laser cutting machines, composite machines, bending machines, hydraulic presses, and various auxiliary equipment such as uncoilers, leveling machines, deburring machines, spot welding machines, etc., Using cutting, stamping, drawing, bending, welding, riveting and other processes, we can manufacture various Wonderful custom sheet metal products of different shapes for you, and can also do surface treatment for the products, including painting, electroplating, wire drawing, etc.
If you need sheet metal fabrication service we are one of the most capable and affordable sources and we can get the job done right.
24” steel pipe (609.6 mm steel pipe) is commonly used LSAW pipe in construction usage. Winsteel Group is professional LSAW steel pipe manufacturer. We have got API 5L PSL 1 and PSL 2 certificate, ISO 9001, ISO 14001, OHSAS 18001 certificate, PED and CPR certificate for several years.
Rafit Metal & Alloys produces and Exports impeccable and super compound darting which incorporates: Hex screw, Hex Nuts, Stud fasteners, Threaded Bars, Washers, Hex attachments and so forth according to guidelines ASTM, ASME, DIN and UNI. The application enterprises are oil and Gas, Chemical, Petrochemical, Power and Energy and Marine industries(On Shore/Offshore).
Do you want a fresh and new look for your home? Reach Assured Roofing for Roof Restoration Melbourne and be assured of roofing treatments. With us, you will get the ultimate roof protection and a 10-year warranty which is proof of our reliable and honest services. No matter what is the size of the project, we have designed affordable solutions to suit your demand. Our excellent workmanship and high-quality materials provide timely roof repairs and effective roof restorations. If you have noticed cracks or leakage in your roof, call our team to help you with your roof.
Navrekha Steel today are the major manufacturer, supplier and exporters of the wide range of ferrous and non-ferrous metal products. We have successfully created an important place in the market under the mentorship of Mr. Parasmal C. Shah.
Union Steel Industry Co., Ltd as member of United Steel Industry Group, specialized in steel pipe and pipe fittings designing, manufacturing, stocking and exporting in China.
Our products
- SMLS &ERW Steel Pipe（especially processing galvanized/FPE/3LPE/Grooved/pipe & flange welding …etc with very competitive price)
- Tubing&casing (Professional standard API 5CT PSL1/2 J55 K55 P110 Q125….)
- Structure steel profile（Mainly provide international general standards, advantage prices for some EU standards or other standards)
- steel plate &pipe fittings(flange,elbow,reducer,valve..etc)
We basically have steel in stock and support fast delivery:
- Steel pipe : ASTM A53;ASTM A106;ASTM A333;ASTM A500;ASTM A252 ..etc or Equivalent
- Structural steel hollow section: EN 10025、EN 10219 S235/S275/S355..etc or Equivalent
- Steel plate : ASTM A36, ASTM A283, ASTM A572..etc or Equivalent
- We can also provide various conventional stainless steel products.
You can forward needs on alisa@union-steels.com i will provide you best price .
Kitchen sink copper faucet LED draw-in kitchen dishes cold and hot water faucet
Great Flexibility: Pull down sprayer with black rubber hose covers a wide range of areas for easy cleaning and washing. Copper water purification kitchen faucet Easy Operation: Single lever handle for effortless and precise water temperature and volume control. Built In LED: Water powered LED light in changing hues creates a moody ambiance and offers extra relaxation.
– The LED light is powered by water flow, and will be activated once the water is turned on.
– Constructed from solid brass for durability and reliability.
– replacement hose for kitchen faucet factory Finished in a high quality, corrosion resistant polished chrome.
– Features a 360-degree swivel pre-rinse spout design and black flexible rubber spray hose.
– Not suitable for low pressure. Minimum required water pressure is 0.1 MPa (1 bar).
– All mounting hardware and hot/cold waterlines are included.
Metallica Metals is known worldwide as the most competitive group in the world of Stainless Steel having its headquarters in Mumbai – India. It was incorporated in the year 1975 by 3 dynamic leaders named as Mr. Babulal Mehta, Mr. Jugal Mehta & Mr. Vallabhchand Mehta & they are the reason behind the exponential growth of Metallica Metals.
Welded razor mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport.
Model: BTO-22, BTO-28, BTO-30, BTO-60, BTO-65
Brand: YUJUN
Code: 73144900
Welded Razor Mesh Specification:
Color: GREEN, WHITE
razor wire security fencing Size: 75mm X 150mm, 150mm X 300mm, 177mm X 400mm, do as required
Material: galvanized, stainless steel
Welded stainless steel razor wire Description
Welded razor mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport. Razor wire mesh is used in operations to pave the field after the installation of a blade barrier. This product can protect you and your property, and ensures the safety of the protective barriers.
This YUJUN razor wire security fence product is almost impossible to climb or cut off with the standard tools, also it has a neat appearance.
Razor mesh is installed in various parts of the world’s airports, military bases, water substation, the border fence, oil depots, factories and so on.
Razor mesh security fence China the benefits
1 it is almost impossible to climb
2 high-strength steel core very difficult to cut off
3 powerful security fence barriers neat appearance
4 no secondary use, so he will not be stolen
5 extremely simple to install, needs three to four to install molding.
More information please click here.
Tee- Banded Hot-dipped Galvanized Malleable Iron Pipe Fittings with BS Thread
| Product Item | malleable iron pipe fitting: elbows, Reputation malleable iron tees, sockets, bends, nipples, unions, crosses, flanges, plugs, backnuts, crosses over, round caps, etc. |
| Material | Malleable cast iron |
| Technics | Casting |
| Size | 1/8″-6″ |
| pipe fittings supplier Edges | Banded, beaded or plain; with or without Ribs. |
| Thread Standard | BS ANSI & DIN |
| Finish | Black, Eclectic Galvanized, Hot Dipped Galvanized, all be antirust treatment |
| Shape | Equal, Reducing |
| China pipes fittings Tee Grades | Heavy series, Standard series, Medium series, Light series |
| Packaging | Cartons, woven bags, wooden boxes |
| Quality Control | Excellent material, precise angles, good antirust property |
| Product Usage | Suitable for joining pipe lines of team, gas, oil, air |
| Certificate | ISO9001:2000; SGS Certificate |
| Others | 1.Special design available according to requirement. |
| 2.MOQ: 1000pcs. Negotialble as per type. | |
| 3.Packaging:In cartons or bags with/without pallet |
Learn more about our product please click here.
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes – ASTM A179/A179M grade pipe temperature withstanding capabilities, it is applied to steel pipe of tubular heat exchanger, condensers and similar heat transfer equipment. ASTM A179 seamless tubes are used in For tubular heat exchangers,condensers,and similar heat transfer apparatuses. , cement and construction industries,water pump,oil pump,mud pump,petrochemicals and steel plants.
- Application:
- apply to the heat exchangers, condensers and heat transfer equipment and similar pipe.
- Production Standard, Grade, Steel No:
- ASTM A179/ASME SA179
- GB6479 10, 20, 16Mn, 15MnV, 12CrMo, 15 CrMo, 12Cr2Mo, 12SiMoVNb
- Delivery conditions:
- Annealed, Normalized, Normalized and Tempered
- Mill test certificates will be issued according to EN10204 3
- Packing: packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
- Size (mm):
- Outer Dimensions.: 6.0mm – 114.0mm
- Wall Thickness:1mm – 15 mm
- Length: max 12000mm
- Inspection and Test:
- Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
- Surface treatment:
- Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
- Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles.
accesorios de bridas ha sido un fabricante y exportador profesionalmente administrado de bridas, tuberías, tuberías. Somos capaces de proporcionar una amplia gama de materiales, desde existencias, para satisfacer sus necesidades.
Flexible stainless steel cable mesh
Flexible stainless steel cable mesh, also called stainless steel cable mesh or stainless steel rope mesh, it is made of high quality stainless steel wire cable. According to the production process can be divided into ring type and interweave type. It is mainly used in the construction of wildlife parks, large animal pens or birdhouses, garden greening walls and handrail fillers or safety nets.
The Bzwiremesh plant has been producing this product since 1990. The independently developed equipment and skilled technology of the plant ensure the delivery of high quality products and perfect service on a global scale.
Flexible stainless steel rope net by S.S. SUS304, SUS316, SUS316L and other various material types of wire rope, two main strand structure: 7 * 7 and 7 * 19. Our mesh products are divided into two main lines according to the type of weave: interweave and ferring. Ring type series according to the ring material is divided into aluminum alloy mesh and stainless steel mesh.
Advantages of BZ stainless steel rope mesh:
High tensile strength, light weight;
Good weather resistance and corrosion resistance;
With good transparency, you can watch the animals and appreciate;
Large mesh span allows for large surface mounting.
| Tycoon Piping is well known for his trusted exporters of best precision tubes in the world. We supply both seamless and welded pipes, in a wide range of stainless steel, titanium, nickel and zirconium alloys. Tycoon Piping is the market leader in supplying of Hot Finished structural hollow sections in the UK and almost 25 years of experience in logistics, stockholding, in-house processing, and sector-specific requirements. We provide the best product guarantee to our clients with full satisfaction. |