Rectangular bars

Rating
Featured/Unfeatured
Claimed/Unclaimed
Super Metal Mfg Co. header.jpg
Mumbai, Maharashtra, India

SUPER METAL MANUFACTURING CO.

We Super Metal Manufacturing Co. { an  iso  9001  :  2008  certified  company  }  based in Mumbai , India since 1965   and is engaged in premier manufacturer importer , exporter , supplier  &  global trading of wide range pipes , tubes , fittings , flanges , fasteners , sheets , coils ,  plates , round bars , hex bars , flats , nut & bolt , angle , channel , structural steel items etc.

 

We have direct association with the reputed manufacturers holding certifications like iso, ped, api etc.

Backed with the global manufacturer base we supply materials directly from the mills or manufacturing facility to the project site or target destination & thus keep our supplies economical by eliminating the extra cost of import, stocking & then export.

All our shipments are covered with insurance to protect everyone involved.

 

We are in a capacity to meet requirements of any standard or customized specifications & of any volume.

Keeping in view the ongoing project emergencies we can also arrange ready stock materials through our global stockiest network.

 

Our products are widely applicable in industries like power , clean energy , nuclear , petrochemicals , oil & gas , off-shore & on-shore , construction , cement , steel , textiles , pharmaceuticals , fertilizers , chemicals , distilleries , sugar, ship building , marine , paper & pulp , dairy , fire  prevention  &  protection etc.

 

Kindly refer to the attached introduction letter for our product range.

Detail size & dimension range of our products are available on request.

Apart from the available range we are confident to meet any type of customized client / project requirements.

 

All our products are manufactured & supplied as per all international material standards & dimension specifications like astm, asme, ansi, awwa, api, din, en, iso, bs, jis, is etc.

 

We supply only quality materials tested from govt approved labs or reputed third party inspection agencies like bv, dnv, lr, tuv, sgs, ibr etc.

 

We take this opportunity with immense pleasure to introduce ourselves as one of the leading stockiest and suppliers of Tubes in Titanium Grade 1, 2 & 5, Monel 400 & K-500, Nickel 200 & 201, Hastelloy ‘B’, ‘C’ & C-22, Alloy 20, Alloy 904L, Duplex Stainless Steel, Super Duplex Stainless Steel , Inconel 600 & 800 & Cupro-Nickel etc.

We also have special category materials such as Beryllium Copper , Niobium , Tantalum , Nickel Nichrome , Nimonic , NiSilver , CuNi , AB1&2 , Tungsten Mn , Al Zr , PB Nickel Alloy , Grade 630 (17-4PH), 32205 (2205) & Grade-446.  All the above materials can be supplied in the form of Rounds, Bars, Flats, Pattas, Circles, Hexagonal ,  Sheets & Plates.

Our other range of materials include, Stainless Steel Seamless / ERW Pipes, Sheets, Perforated Sheets, Plates, Circles, Rods, Wire, Wire-Mesh, Flats Angles, Channels etc. of Grades TP-304, 304L, 316, 316L, 321, 309, 309S,

SUPER METAL MANUFACTURING CO. was formed in the year 1965. In the past 50 years of business terms, SUPER METAL MANUFACTURING CO. has made a vertical growth and now its operating through out the country and our clientele also spreads globally.

Foreword

This Reference Book Has been complied to provide our customers with as complete a picture as possible of the wide variety of Steel, Aluminum, Stainless Steel, Brass, Copper, Nickel, Chain and associated products, and Aircraft Alloys which we carry in stock and the pre-processing services which we are equipped to provide. Most items listed are normally available for immediate shipment. Our experienced personnel and modern distribution plants ensure efficient handling and rapid shipment of orders. For ready reference we have included technical information relating to the various products. Bulletin which we have available on request give more detailed information on certain products. Our staff is available to help with your technical problems and we welcome your inquiries. We have been serving industry with quality

Priorities :

  • Guaranteed Quality.
  • Adherence to delivery Schedule.
  • Competitive Price.

Exemplary Service.

SUPER  METAL MANUFACTURING CO.  has a committed man power strength drawn from reputed organization those are ready to serve 24*7.

Maintaining long term relation is our ultimate goal. A satisfied customer is our valuable asset.

 

 

 

 

 

PRODUCTS 

Large Diameter pipes:

  • Stainless Steel Pipe (welded) 1” NB to 40” NB. In schedule-5, schedule 10,

Schedule20, schedule40 and also special wall thickness is formed on 800 M.

  1. Press Brakes Hydraulic Press in length upto 6.0 to 7.0 meters. This section

Produces S. S. Pipes (Welded) as per ASTM A – 358 by TIG welding and filler materials is used.

  • The large diameter pipe is then sized & straightened to meetovality and

dimensional requirements of the applicable specifications. Testing, according to specifications, is                                          then performed by either X-ray or Hydrostatic method.

Final marking to size, grade & specifications is done prior to final visual inspection before               dispatch.

  • Chemical, physical and hydrostatic tests are done regularly since input raw materials are taken into the factory and during processing till dispatching of the finished product.

Pipes & Tubes:

  • Stainless Steel: ASTM A312 TP 304 / 304L / 304H / 316 / 316L / 317/ 317L / 321 /310 / 347 / 904L ETC.
  • Carbon Steel: ASTM A53 GR. B / A 106 GR. B / API 5L GRADE B / API 5LGR. X42 / 46 / 52 / 56 / 60 / 70 / A333 GR. 6
  • Alloy steel: ASTM A335 GR. P1 / P5 / P9 / P11 / P22 / P91 /
  • Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High, Speed Steel, Zinc, lead, Incoloy-600H etc.
  • Size: upto 24”NB (Seamless & Welded) Wall Thickness: Schedule 5S to Schedule XXS.

All these materials are available in NB size as well as 0d size in all grades.

We can also arrange pipes and tubes as per the customers requirements, which is other than the standard  sizes.

 

Sheets, Plates & Coils:

 

  • Material Grade : Stainless Steel, Nickel Alloy, Carbon Steel, Pressure Vessel Steel, Marin Construction Steel, Abrasion Resistant Steel Alloy Steel, Other Ferrous & Non-Ferrous metals etc.
  • Types: Sheet, Plates, Strips, Round Bars, Wires Channel, etc. We are direct importers of sheets, Plates and Coils in all sizes and qualities in Stainless steel from the BEST manufacturers to give you the Ultimate in Quality. Also requirements of Copper, Brass, & MS qualities can be met at ease.

Other Items:

  • Stainless Steel:-Rods / Flats / Pipe / Sheets / Coil Aluminium, Tubes, Angles, Channels, Rods,

Flats, Sheets, and strips available in various sizes.

 

Forged Fittings:

  • Stainless Steel: ASTM A182 F304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L etc.
  • Carbon Steel: ASTM A105 / A 694F 42 / 46 / 52 / 56 / 60 / 65 / 70 / A 350 LF3 / A350 LF 2, etc.
  • Alloy Steel: ASTM A 182 F1 / F5 / F9 / F11 / F22 / F91 etc.
  • Others: Monel, Nickel, Inconel, Hastalloy, Copper, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc etc.
  • Types: Elbow, Tee, Union, Cross, Coupling, Cap, Bushing, Plug, Swage Nipple, Welding, Boss Hexagon Nipple, Hexagon Nut, Hose, Nipple, Bend, Adapter, Insert, Weldolet, Elbowlet, Sockolet, Thredolet, Nipolet, Letrolet etc.
  • Size: 1/8” NB to 4” NB. (Socketweld & Threaded)

Class: 2000#, 3000#, 6000#, 9000# etc.

 

Flanges:

 

  • Stainless Steel:- ASTM A182 F304 / 304L / 304H / 316 / 316L / 317/ 317L / 321 / 310 / 347 / 904L etc.
  • Carbon Steel:- ASTM A105 / A694 F42 / 46 / 52 / 56 / 60 / 65 / 70 / A 350 LF3 / A 350 LF2 , etc.
  • Alloy Steel: ASTM A 182 F1 / F5 / F9 / F11 / F22 / F91 etc.
  • Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc.
  • Types:- Weldneck, Slipon, Blind, Socket Weld, Lap, Joint, Spectacles, Ring Joint, Oriface, Long Weldneck, Deck Flange etc.
  • Size:- 1/2” NB TO 24” NB.
  • Class:- 150#, 300#, 400#, 600#, 900#, 1500#, & 2500#, Din Stand & Plate Flange BS – 10 Table D, E, F, H, J, K, etc.

Buttweld  Fittings:

  • Stainless Steel: ASTM A403 F304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L etc.
  • Carbon Steel:- ASTM A234 WPB / A420 WPL3 / A420 WPL6 MSS-SP- 75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70
  • Alloys Steel:-ASTM A234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91 etc.
  • Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc.
  • Types:- Elbow, Tee, Reducer, Retuen, Bends, Stub-Ends, Cap, Collar, Cross, Insert etc.
  • Size:- 1/4” NB TO 32” NB. (Seamless & Welded)
  • Wall Thickness:- Schedule 55 To Schedule XXS.

NICKEL 200

Commercially pure (99.6%) wrought nickel with good mechanical properties and resistance to a range of corrosive media. Good thermal, electrical and magnetostrictive properties. Used for variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalies. Standard products forms are round, flats, pipe, tube, plate, sheet, forging stock, strip and wire.

NICKEL 201

Commercially pure (99.6%) wrought nickel essentially the same as Nickel 200 but with a lower carbon content to prevent embrittlement by integranular carbon temperatures over 600 of (3015oC). Lower carbon content also reduces hardness making Nickel 201 particularly suitable for cold-formed items. Standard product forms are round, flats, pipe, tube, plate, sheet, forging stock, Strip and wire.

 

MONEL ALLOY 400

A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water hydrofluoric, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fitting, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire.

MONEL ALLOY K-500

Corrision-hardenable nickel-copper alloy that combines on resistance of Monel alloy 400 with greater hardness. It also has low permeability and is to under -150°F (-101°C). Used for pump shafts, and value instruments, doctor blades and scrapers, trim, fasteners, and marine propeller shafts. Product forms are round, hexagon, flats, forging tube, plate, sheet, strip and wire.

INCONEL ALLOY 600

A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking corrosion by high-purity water and causing corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip and wire.

INCONEL ALLOY 601

A nickel-chromium alloy with an addition of aluminum for out standing resistance to oxidation and other forms of high temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire.

INCONEL ALLOY 625

A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corosion. Used in chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactor. Standard product froms are round, flats, forging stock, extruded section, pipe, tube, plate, sheet, strip and wire.

 

INCOLOY ALLOY 825

A nickel-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids to stress corrosion cracking and to localized attack such as pitting arocrevice corrosion. The alloy is especially resistant to sulfuric and phosphoric acids. Used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production and pickling equipment. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire.

INCOLOY ALLOY 800

A nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment heating-element sheathing, and nuclear steam-generator tubing. Standard product forms are round, flats, forging stock, pipe, tube, plate, strip and wire.

INCOLOY ALLOY 800HT

A nickel-iron-chromium alloy having the same basic composition as INCOLOY alloy 800 but with significantly jigher creep-rupture strength. The higher strength results from close control of the carbon, aluminium and titanium contents in conjunction with a higher-temperature anneal. Used in chemical and petrochemical processing in power plants for super heater and reheater tubing in industrial furncaces and for heat-treating equipment, Standard product forms are round, flats, forging stock, pipe, tube, plate, strip and wire.

HASTALLOY C 22

(UNS N06022; W. Nr. 2,4602; NiCr21Mo14W) is a fully austenitic advanced temperatures. This alloy provides exceptional resistance to general corrosion, pitting, crevice corrosion, chemical/petrochemical processing, pollution control (flue gas desulfurization), power, marine, pulp and paper processing, and waste disposal industries. Used in pollution control, chemical processing pulp and paper production and waste treatment standard product forms are round, forging stock, tube, pipe, plate, sheet, strip and wire.

HASTALLOY C-276

A nickel-molyoaenum-chromium alloy with an addition of tungsten having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as welded structures. Used in pollution control, chemical processing pulp and paper production and waste treatment standard product forms are round, forging stock, tube, pipe, plate, sheet, strip and wire.

SMO – 254

Avesta Sheffield 254 SMO is an austenitic stainless steel which due to its high molybdenum content possesses very high resistance to pitting and crevice corrosion. The steel grade was developed by Avesta Sheffield for use in halide-containing environments such as seawater. 254 SMO also shows good resistance to uniform corrosion and, especially in acids containing halides, this steel grade is superior to conventional stainless steels.

254 SMO is registered trademark of Avesta Sheffield AB.

The high levels of molybdenum in particular but also of chromium and nitrogen endow 254 SMO with extremely good resistance to pitting and crevice corrosion. The addition of copper provides improved resistance in certain acids. Furthermore, due to its relatively high nickel content in combination with the high levels of chromium and molybdenum 254 SMO possesses good resistance to stress corrosion cracking.

ALLOY – 904L

904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / crevice corrosion and stress corrosion cracking.

 

ALLOY – 20

Alloy 20 is one of the so-called “super” stainless steels that was designed for maximum resistance to acid attack. It’s nickel, chromium, molybdenum and copper content contribute to its overall resistance to chlorideon stress corrosion cracking and general pitting attack. The alloy is stabilized with columbium to minimize carbide precipitation during welding. It has good mechanical properties and can be fabricated with comparative ease. Although the alloy was designed for use in sulfuric acid related industries, it finds wide usage throughout the chemical processing industry. It also is used for processing pharmaceuticals, food, gasonline, solvents, plastics, explosives, synthetic fibres and many other products.

STAINLESS STEEL 304

The most popular stainless steel has an economic balance of alloying elements to ensure its good cold formability, corrosion resistance, toughness and good mechanical properties with no excessive work-hardening. It performs well in unpolluted atmosphere but can tarnish or lightly rust in damp atmospheres around some industrial and on/offshore locations. The steel has been used extensively for potable water tubing and in fresh feedwater systems where precautions are taken to avoid crevice attack under deposits, etc. performance in aerated seawater is not good without adequate galvanic or cathodic protection. Stability and toughness at cryogenic temperatures is high.

STAINLESS STEEL 304H

TP 304H with guaranteed carbon content of min. 0,04% which gives a better creep resistance. Similar oxidation resistance to TP 304. Main applications: Heat exchangers, chemical and petrochemical furnaces.

STAINLESS STEEL 304L

Low carbon version of TP 304 guaranteed no creep resistance above 500 C. good high temperature oxidation resistance up to 900°C. General corrosion characteristics are similar to TP 304. Stability and toughness at cryogenic temperatures is high. Main applications: Pipe and heat exchanger tubes in chemical, petrochemical and food industries.

STAINLESS STEEL 316

This is one of the family of 17% CR 12-13% Ni steels containing Mo of 2,0-2,4% stabilized with Ti which minimizes chromium carbide precipitation and improves resistance to intergranular corrosion. In the damp industrial or coastal atmospheres of Europe, they.

STAINLESS STEEL 316L

These grades belong to the family of 17% Cr 12-13% Ni steels containing 2,0.3,0%Mo. This standard grade is used where specific attributes of other members of the family are not necessary – eg. no likehood of intercrystalline corrosion caused by wedding. Special for TP 316L, low carbon content, minimizes chromium carbide precipitation and improves resistance to intercrystalline corrosion. After TP 304/304L type steels, these TP 316/316/L grades are the most widely used austenitics. Good high temperature oxidation resistance upto 900°C. In the damp industrial or onshore atmospheres of Europe, they perform better than TP 304/304L and ferritic grades. In low temperature seawater they offer limited resistance to pitting but are susceptible to crevice attack. Their short and long time properties at elevated temperatures are also superior to those of comparable TP 304/304L grades. Main application: Pipe and heat exchanger tubes in chemical and petrochemical plant, in boilers and food industry.

 

STAINLESS STEEL 316H

This grade with guaranteed carbon content of min. 0,04% enhances strength at elevated temperatures. Similar oxidation resistance to TP 316. Main applications: heat exchangers, furnaces, chemical and petrochemical plant.

STAINLESS STEEL 321

High carbon steel prone more to intercrystalline attack in weld zones and slower cooling sections. These steel avoids such attacks through its stabilization with Ti. The corrosion behavior of this alloy in natural environments is very similar to the TP 304/304L alloys. Architecturally, it may not be adequate for near-industrial or onshore locations in Europe. Satisfactory in many low-chloride water, it is prone to pitting or crevice corrosion in seawater. Water treatment, galvanic protection and deaeration can influence the performance.

STAINLESS STEEL 321 H

This is the high carbon version of TP 321 which ensures great creep resistance. Behaves much the same as TP 321 in oxidation resistance. Main applications: heat exchangers, furnaces, boilers in chemical and petrochemical plant.

UNS S31803

A widely used duplex steel combining high strength and corrosion resistance in various organic acids, unorganic acids, aggressive coolingwaters and hydrous H2S/NaCl mixtures. With a near equal mix of austenite and ferrite, they give yield strength 30% higher and tensile strengths marginally higher than comparable nitrogen-containing austenitics. High resistance to general corrosion and specifically to pitting and crevice corrosion. Their resistance to stress-corrosion cracking in neutral chlorides is superior to that of the austenities. In high chloride acidic or moderately sour environments where hydrogen or sulphide stress cracking is more likely, higher alloyed austenitics need also to be considered. Impact values are high and transition temperatures of base materials vary around 50°C. However, the proportion and orientation of ferrite in welds and base materials may significantly affect toughness at subzero temperatures. Exposures to moderate and high temperatures and less rapid cooling may cause embrittlement.

UNS S32760   

UNS S32760 (TSD2507) is a super ferritic-austenitic grade with high mechanical properties and superior corrosion resistance. Besides the ferritic-austemitic structure, TSD2507 has an excellent resistance to pitting and crevice corrosion and is therefore particularly suitable for sea water applications and for process systems on offshore platforms, respectively in all situations where there is a risk of stress corrosion. The high tensile properties are twice comparing with TP 316 L stainless steel. The service range is between -50°C up to  +275°C. More detailed informations about this particular grade are described in our TDS 2507 data sheet.

 

 QUALITY CONTROL:

RAW MATERIAL TESTING:

All the material used for manufacturing of fittings and other fabrication jobs are tested for chemical & mechanical properties. The results are confirmed to meet original material requirement before processing. We are using measuring equipments calibrated by Govt. approved calibration agencies.

DIMENSIONAL INSPECTION :

All type of flanges and fitting are checked for dimensional accuracy from raw material stage to in process & final product delivery by using calibrated measuring instruments.

MATERIAL TRACEABILITY:

All the material used for manufacturing of fitting, valves and other fabrication jobs are identified & fully traceable from raw material stage to final product.

HYDRO TEST UP TO I 5000 PSI:

All type of fitting are tested at a specified static pressure for a predetermined period for no leakage.

QUALITY POLICY:

SUPER METAL MANUFACTURING continually improves the effectiveness of the quality management system (QMS) and sets quality objectives and work plans. Moreover, SUPER METAL MANUFACTURING is committed to upgrade the capabilities of its technical and administrative staff through formal training and continuous technical quality awareness.

We have achieved the high quality through the professional competence of the personnel, high working motivation and a service minded attitude. Every single employee of SUPER METAL MANUFACTURING is responsible for the quality of his/her work.

All SUPER METAL MANUFACTURING products are tested in accordance to internationally recognized standards or our own more stringent internal test procedures, which is developed considering the harsh field conditions. In addition to this we also offer specific testing to our client’s requirement.

We are registered with many renowned govt. & public sector companies including BARC, NPC. We can provide test certificates from govt. approved laboratory or manufacturers T.C. we also agree with third party inspection of Goods With Lab Entities Such As: M/s. UHDE, EIL, LLOYDS, TATA, PDIL, HGC, SIMON, CARVES, DAVY POWERGAS, ICB, INTENG, BAXCOUNSEL, BUREAU VERITAS.

 

INNOVATION

http://www.tg-manufacturing.com/   ( COPIED FROM THIS SIDE )

Super Metal Manufacturing Co. is a Indian-based metal products manufacturing company focused on utilizing modern technology, advanced manufacturing design, and a skilled group of trained associates to offer world-class metal products to a variety of industries around the globe.

Our dedication to “manufacturing the future” is what keeps us ahead in innovation, service, and our ability to provide quality metal parts to our customers. Contact us today for a free quote!

 

Super Metal Manufacturing Co. continuously strives to be the most diverse process-capable, metal products manufacturing company, not only in India, but throughout the entire metal products manufacturing industry.

Our clients have come to expect the kind of one-on-one service they would normally receive from smaller metal part suppliers, while knowing that they can count on our diverse array of metalworking capabilities and skilled staff to handle any job, of any size or complexity.

In short, our clients come to us for our wide range of metal ferrous & non-ferrous capabilities, and they stay with us because of our individualized service & innovation through every step of their metal product’s manufacturing cycle.

logo Vishwa.jpg
logo Vishwa.jpg
bright round bars.png
bright hex bars.png
bright Square bars.png
Survey No. 236, 237, Plot No. 1 to 6 Ambica Industrial Estate,Kalol,Gujarat

Vishwa Stainless Steel Pvt. Ltd. is one of India’s most trusted and fastest growing stainless steel bar manufacturing company. An ISO 9001:2015 company, Vishwa Stainless Steel Pvt. Ltd. was established in 2011 with a vision to design and manufacture stainless steel bright bars in round, square and hexagonal shapes for various industry.

With state-of-the-art manufacturing machinery, contemporary technologies and highly skilled staff are the core strength of our company. Today, Vishwa Stainless Steel Pvt. Ltd. offers a wide range of stainless steel bars for the diverse range of applications in industries like chemical, pharmaceutical, dairy, engineering, oil and gas, fertilizer, paper and pulp and many more.

The well-equipped production unit and quality assurance facility help us to achieve voluminous and qualitative production. We are currently supplying our products across India and exporting it to the various countries of the world including Turkey, UAE, USA, Germany, UK, Canada, Netherland, Poland etc.

For any inquiry email us at: sales@vishwastainless.com

 

Gencosman Mh.cincindere Cd.no:6 Esenler / Istanbul Istanbul Istanbul, 34165 Turkey

Dizdar Iron & Steel & Metal, Inc. was established in 2004.
Alloy Tool Steels (Hot-work Tool Steels, Cold Work Tool Steels, Plastic Mould Steels, High Speed ​​Steels)
Carbon Steels (Steels Breeding, Cementation (Cement), Steels, Free Cutting Steels)
Sheet Metal Trade.
Company has been supplying raw material of steel for Automotive Industry, Construction, Petrochemical, Elevator Manufacture, Chain and Forging Industries, Alloy Manufacturing, Defense Industry and Agriculture Sectors since 2004.
Customer satisfaction, Mutual trust and Business Ethics are always our primary goals.

316 Huangshi Ave, Huangshi, Hubei, China

The company is a large steel company, is the bearing steel, gear steel, spring steel, tool and die and just thick-walled seamless steel tubes and other varieties of precision in the production base, ranking the country’s largest 500 industrial enterprises. Leading products for the gear steel, bearing steel, spring steel, die steel, high alloy steel, tool steel and other special purpose high speed steel, products sold abroad, exported to 30 countries on five continents and regions. Produced large-size four…

IMG_7303.JPG
IMG_7303.JPG
IMG_7301.JPG
IMG_7302.JPG
IMG_7314.JPG
111I51911-0 copy.jpg
alloy-steel-pipe-tube-fittings-manufacturer-suppliers copy.jpg
buttweld-pipe-elbow copy.jpg
2006-01-08-nut-sculpture copy.jpg
Forged_carbon_steel_round_bar copy.jpg
K500-Monel copy.jpg
304-304L-316-316L-Stainless-Steel-Forged copy.jpg

We, R-PIPE OVERSEAS Are BIGGEST STOCKHOLDER & EXPORTER of Pipeline Products and Exporting to More Than 40 Countries Including U.S.A, Europe,

Gulf & Asian Countries And Regions In The World. Our High – Quality Products And Strong International Reputation In  The Industries Related To The

Chemicals, Engineering, Pharmaceuticals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps  & Petrochemicals,

Textile, Dairy, Oil & Natural Gas, Allied Industries Organization In Term Of The Specific Materials, Technology Are Highly Valued By Indian & Foreign Customers.

Materials:

PIPES | TUBES | PLATES | SHEETS | FLANGES | FASTENERS | FORGED FITTINGS | BW FITTINGS | ROUNDBARS. IN HIGH NICKEL ALLOYS | DUPLEX STEEL | STAINLESS STEEL | ALLOY STEEL | CARBON STEEL ETC.

 

REGARDS

ARVIND JAIN – SALES HEAD

R-PIPE OVERSEAS

T: +91 22 6659 5201

M: +91 9930551137

Whatsapp: +91 9082065807

Skype: asj.rpipe

E: info@rpipeoverseas.com & rpipeoverseas@gmail.com

W: http://www.rpipeoverseas.com

A: Shop No. 28, Gr. Flr, 153/154, Shree Ishwaleshwar Siddhesh Deep CHS,

PB Marg, Mumbai – 400008. (INDIA)

GST TIN NO.: 27ALTPJ6984G1ZB

 

Ameerpet Hyderabad Andhra Pradesh 500016 India

Steel Exchange India Limited engages in manufacturing and selling ingots using sponge iron and scrap/pig iron. The company produces TMT bars and steel rebars; and MS wire products, high carbon steel wire products, and galvanized iron products. Steel Exchange India also trades in structural steel, long products, special steels, semis, and raw materials for steel sector. The company was incorporated in 1999 and is based in Andhra Pradesh.

Cbd Belapur Mumbai Maharashtra Zip:400614 India

Over the years JAV Group has evolved on continuous basis to keep pace with the changing times. We have undertaken a sustainable journey of transformation by foraying into new markets, segments and exploring new business areas in a bid to keep our entrepreneurial spirit alive, and to continue growing.

Our each vertical is manned with qualified and trained professional to undertake the responsibility and perform to the expectation of our Valued Customers and provide value creation for each stake holders in the value chain.

We are committed to have collaborative approach, innovative growth, maintain our can do attitude by evolving & learning everyday to keep pace with changing times. This helps us to have a robust value system comprising positive attitude, action and achievement.

Business Verticals

Trading – This is the flagship business of the Group. The Company, mainly focus on Exports & Imports of Mild Steel (Flat & Structural) AND Steel Scrap.

Fabrication – The company provides Fabricated Tank/ Kettle for Structural Hot Dipped Galvanized (Batch Process). The company provides its own material, design & technology. The size of the Zinc Tank is as per the customer requirements. Our competitiveness in the market is derived by our quality, pricing and delivery time. We have an edge in providing post-delivery service through our consultancy enterprise to maintain the Quality of the Product.

Consultancy – With the increasing number of Structural Galvanizing units the thrust on the Quality by the End Users is increasing; and non-availability of technical service to the fragmented Structural Galvanizing Industry is the area where we provide a supporting role to help them achieve the desired quality. Our Scope of work starts with thorough inspection of existing production process and providing solutions/ recommendations till the time unit achieve its desired result of Quality. Our technical experts are highly professional and are trained in Australia.

Tourism – Our Company focuses on Inbound Tourism for Explore India concept. We undertake Individual/ Corporate/ Group Holiday Packages only; comprising of Visa Assistance, Air Ticket Assistance and providing of complete Holiday Package for our Foreign Tourist Guest.

Windmill Energy – The power demand in India is increasing. And adhering to our eco-friendliness we wish to install Windmills to generate power. Currently company has acquired land to have the installed capacity of 1.2 MW (with 48 meter rota-dia) to mark a beginning and then increase the same to 10 MW over a period of time; for the same the company is looking for strategic/ potential partner.

fasteners_manufctaurer_exporter_repute_INDIA 200x250.png
fasteners_manufctaurer_exporter_repute_INDIA 200x250.png
AAEAAQAAAAAAAAkBAAAAJDY4Yzc5MDBjLTBiZGEtNDRlNi1iZDllLWIyMTY4YWRhMjdjMg.jpg
pipe_fittings_manufcaturer_exporter_small.png
ALUMINIUM ANGLE.CHANNELS.BEAMS.1.jpg
flange_manufacturer_exporter.png
pipes_tubes_stockiest_exporter_repute_steel_engg_co2.png
ALUMINIUM PIPES.1.jpeg
rods_stockiest_exporter_repute_steel_small.png
ALUMINIUM PIPES.2.jpg
Aluminum-sections-PROFILES.jpg
1. angles_Channel_structurals.png
b8m stud bolt repute.jpg
2. coils_exporter.png
flanges.jpg
REPUTE PRODUCTS.png

We take immense pleasure in introducing ourselves as one of the leading Importer, Stockiest & Suppliers:

 

STAINLESS STEEL    :: Seamless / ERW Pipes, Pipe-Fittings, Sheets, Perforated, Sheets, Plates, Circles & Ring, Rods, Wire, Wire-Mesh, Flats, Angles, Channels, SMP Rodes Eelectro etc. of Grades TP-304,304L,316,316L,321, 309, 310, 409, 410, 410S, 420, 430, 904, 904L etc..

 

S.S. & M.S. Fittings :: Seamless / ERW Stainless Steel Grade 202, 304, 304L, 309, 310 310S, 316, 316L, 321,

(B/W & S/W)             409 410 430 904 904L Elbow, Tee, Reducer, Long, Short, Stub end, Flanges, Nipples, Unions, Caps, Hex, Nipple, House Nipple, Coupling, Nut Bolts, Pipe Clamps, Dairy Fittings, Tricover, Clamp & Vales, and Industrial raw material etc.

 

ALLOY STEEL          :: Seamless / ERW Pipes, Sheets, Plates, etc. of Grades EN-8, EN-9, EN24, EN-36,

EN-353, HCHCR – WPS, D2-D3, OHNS, High Speed, Steed, Steel, Hot Die Steel, 16MNCR-5, 20MNCR-5, SAE-8620 of ASTM A-335 GR, P1,P9, P11,P12,O22,etc.ASTM A-387 GR.,515/516GR.,60,70 & IS 2062 etc.

 

NON-FERROUS METAL:: Copper, Brass, Aluminum, Phosper-Bronze, Monel. Nickel, Inconel, Lead, Zinc, Hastelloy B & C, Titanium, Cupro-Nickel, Gun-Metal etc.. in the form of Rounds, Plates, Sheets, Wires, Circles, flats & Tubes.

 

MANUFATURING   :: Manufacturing of all types of Pipe Fittings and Nut Bolt, Round Machinery,

All Types of Industrial Estate Raw materials etc.

Via A. Volta, 23, 25020 FLERO BS, Italy
+39 0303 580 156+39 0303 580 156
39 030 2659764

Inox Service has specialized in the marketing of stainless steel, offering a wide range of products. Stainless Service is always able to meet the needs of its clients both in Italy and abroad, ensuring efficiency and professionalism.

Dadu Pipes Pvt LtdC-101, Raj Nagar District Center Raj Nagar Ghaziabad Ghaziabad Uttar Pradesh 201001 India
(0120) 6403737(0120) 6403737
91-926840428291-9268404282
91-120-2705613

Dadu Pipes is leading ISO certified manufacturer & exporter of ISI marked MS ERW Pipes / Tubes in the size range of 15mm NB to 350mm NB up to 9.52 mm thick, Hollow Sections from 72 mm to 200mm & Tubular Poles SP 1 to SP 80 in the Brand Name “DADU” as per the requirement of Customers. We have the privilege to mention that we are serving Private Sector, Public Sector & Departments of Centre and States Governments for the last eight years up to their satisfaction and thus are contributing in the growth of the country a little bit at our level.

Dadu Pipes is approved Vendor on records of NTPC-NOIDA, EIL, MECON RANCHI & DELHI, TATA PROJECT, J P GROUP, MAHARASTRA POWER, ANDHRA POWER, M.P-POWER, CHATTISHGARH POWER, HARYANA POWER, PDIL, POWER GRID, ADANI POWER, INDIAN OIL, HINDUSTAN PETROLIUM, BHARAT PETROLIUM CORPORATION LIMITED, MANGLORE REFINERY AND MORE……

Dadu Pipes is supplying the MS ERW pipes to various State & Central Govt Departments along with PSU’s viz Maharashtra State Power Generation Company (MAHAGENCO), CSPGCL, HPGCL, MPPGCL, APPGCL, NTPC Plants, Adani Power, U.P. Jal Nigam, Minor Irrigation (U.P.) Central Equipment & Store Procurement Circle (CESPO) U.P. Nalkoop Mandal Uttrakhand, State PHE of Jammu & Kashmir etc on regular basis up to their Satisfaction Level.

Company valued customers in Oil and Gas Sector include Engineers India Ltd. (EIL), Indian Oil Corporation Ltd. (IOCL) HPCL Mittal Energy Ltd. (HMEL), Mangalore Refinery Petrochemical Ltd. (MRPL)Brahmaputra Cracker and Polymer Ltd. (BCPL), Indraprastha Gas Ltd. (IGL), Chennai Petroleum Corporation Ltd. (CPCL), Reliance, & many other Refineries in India.

Dadu Pipes is further taking liberty to have some precious moments from your valued time and state that we have received repeat orders from MRPL, BPCL, MAHAGENCO, IOCL, PUNJ LIOYD & ADANI POWER in the Competitive market of today.

Dadu Pipes is an ISO-9001 & ISO-14001 accredited Public Limited Company. We have well established and well maintained quality system conforming to International Standards of ISO 9001 & ISO 14001.

11A, Carnac Siding Road, 73 Sakar Galli, Iron Market, Mumbai, Maharashtra, 400009, India
Phone:+9102224015152, +91 22 24033664, +91 22 2403Phone:+9102224015152, +91 22 24033664, +91 22 2403
Fax:+9102227425806, +91 22 24015152
Amanat Steels Pvt Ltd No. 54, Neela Sadan, Shop No. 9 1st Carpenter Street Mumbai Mumbai Maharashtra 400004 India
(022) 66381331 23811331(022) 66381331 23811331
(91)-9820852252 (91)-9820550556(91)-9820852252 (91)-9820550556
(91)-(22)-23811331

Amanat Steels Pvt. Ltd. was incorporated in year 2009 and is known as a reputed manufacturer and exporter of quality Fittings, Bends, Outlets and Flanges in Stainless Steel, Duplex Steel, Cu-NI, Nickel Alloy, Alloy Steel and Carbon Steel. Our product range includes Copper Nickel Outlets, Monel Outlets, Nickel Outlets, Inconel Outlets, Hastelloy Outlets, Titanium Outlets, Copper Nickel Flanges, Monel Flanges, Inconel Flanges, Hastelloy Flanges, Titanium Flanges and New Items.

AKC Steel Industries Ltd Lansdowne Towers, 4th Floor, 2/1A, Sarat Bose Road Kolkata Kolkata West Bengal 700020 India

Steel is considered to be the backbone of human civilization. By virtue of its abundance, low cost and wide application capability, steel is termed as the people’s metal. Consumption of steel is crucial for the development of an economy.

Beekay Group took up this challenge 30 years ago and has blossomed into one of the most reputable groups of engineering industries in India, making steel and a wide range of rolled products, bright bars, laminated spring and coil springs with its manufacturing activities spread over Kolkata, Jamshedpur, Chennai and Vishakapatnam. The Group has achieved an annual turnover of Rs. 450 crores (fy-2004-2005) which is on a steady rise.

Showing 13 results